[Bug 20621] New: DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Summary: DoubleCAD XT-1.1: installation is OK, then the program
                    opens, and it's immediately frozen [X11 still works]
           Product: Wine
           Version: unspecified
          Platform: Macintosh
               URL: http://www.DoubleCAD.com
        OS/Version: Mac OS X 10.5
            Status: UNCONFIRMED
          Severity: normal
          Priority: P2
         Component: -unknown
        AssignedTo: [e-mail]
        ReportedBy: [e-mail]

I have installed DoubleCAD in WINE (with the terminal) .
After registration with an activation code for the free version,
which I received by email after contact on the website: "www.DoubleCAD.com",
WINE asked for "GECKO" .
I agreed an installed,
the program opens, with "X11" .
But nothing worked,
no menu, no help (F1-button) .
To quit the frozen program, I had to quit "X11" .
X11 was still running properly .

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Dmitry Timoshkov  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
           Platform|Macintosh                   |PC

--- Comment #1 from Dmitry Timoshkov   2009-11-08 15:55:45 ---
Wine version? Any console output?

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #2 from riek   2009-11-09 06:21:07 ---
Dmitry, I use WINE 1.1.30
What do you mean with: "console output" ?

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Vitaliy Margolen  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
            Version|unspecified                 |1.1.30

--- Comment #3 from Vitaliy Margolen   2009-11-09 08:53:58 ---
Attach (as a plain text file DO NOT paste): http://wiki.winehq.org/FAQ#get_log

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #4 from riek   2009-11-23 16:41:50 ---
Created an attachment (id=24929)
 --> (http://bugs.winehq.org/attachment.cgi?id=24929)
a view at my way through the terminal

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #5 from riek   2009-12-13 07:28:52 ---
hoi,
Dmitri & Vitaliy,
is someone trying to fox the bug ?
greetings,
rik

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Dmitry Timoshkov  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
  Attachment #24929|0                           |1
        is obsolete|                            |

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #6 from Dmitry Timoshkov   2009-12-14 05:45:34 ---
Start with attaching plain text instead of an .rtf

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #7 from riek   2009-12-14 07:09:07 ---
Created an attachment (id=25206)
 --> (http://bugs.winehq.org/attachment.cgi?id=25206)
plain text- my way through the terminal

i really hope i did it right this time

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #8 from Dmitry Timoshkov   2009-12-14 07:16:01 ---
> err:wgl:has_opengl Failed to load libGL: dlopen(libGL.1.dylib, 266): image not found
> err:wgl:has_opengl OpenGL support is disabled.

Probably this is one of the problems you need to fix first.

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #9 from riek   2010-01-04 04:46:20 ---
hoi,
I asked for an answer at openGL,
the forum for ma users,
and the only answer I got was
to ask a solution at winehq>bugzilla

so I'm back
driving around in circles
can anyone give a little bit of help

I have openGL on my computer (OSX5.8)
I do software-updates on regular bases
and i have the following version of openGL:
OpenGL Driver Monitor 1.4 (2007)
OpenGL Profier 4.0 (2003-2006)
OpenGL 1.3 Shader Builder (2007)

how do I get the openGL to run properly ?

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Dan Kegel  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |[e-mail]

--- Comment #10 from Dan Kegel   2010-01-05 05:36:14 ---
Say, since you're on a mac, you might give Crossover a shot
instead of Wine.  It might have some extra polish to help
you past this situation.

Wine's dxdiag isn't real enough to be used a a diagnostic tool...
hopefully somebody will finish cleaning up the ucla code
so it can be committed.

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

riek  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
  Attachment #25206|plain text- my way through  |is wine good for
        description|the terminal                |cad-programs?

--- Comment #11 from riek   2010-05-09 05:18:42 ---
(From update of attachment 25206)
someone told me that no cad-program could run under wine,
i hope it's not true !

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Dmitry Timoshkov  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
  Attachment #25206|is wine good for            |terminal output
        description|cad-programs?               |

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

Austin English  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
         OS/Version|Mac OS X 10.5               |Mac OS X

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

http://bugs.winehq.org/show_bug.cgi?id=20621

--- Comment #12 from Austin English  2013-11-13 16:51:54 CST ---
This is your friendly reminder that there has been no bug activity for 2 years.
Is this still an issue in current (1.7.6 or newer) wine? If so, please attach
the terminal output in 1.7.6 (see http://wiki.winehq.org/FAQ#get_log).

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

https://bugs.winehq.org/show_bug.cgi?id=20621

[e-mail] changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |[e-mail]

--- Comment #13 from [e-mail] ---
Last response

riek 2010-05-09 05:18:42 CDT

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

https://bugs.winehq.org/show_bug.cgi?id=20621

Austin English  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |RESOLVED
         Resolution|---                         |ABANDONED

--- Comment #14 from Austin English  ---
Abandoned.

[Bug 20621] DoubleCAD XT-1.1: installation is OK, then the program opens, and it's immediately frozen [X11 still works]

https://bugs.winehq.org/show_bug.cgi?id=20621

Bruno Jesus  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |CLOSED

--- Comment #15 from Bruno Jesus  ---
Closing abandoned bugs.