Module: wine Branch: master Commit: 57aaa274d9016420797d63250620aa228323d83f URL: https://source.winehq.org/git/wine.git/?a=commit;h=57aaa274d9016420797d63250...
Author: Rémi Bernon rbernon@codeweavers.com Date: Wed Feb 16 09:26:55 2022 +0100
xinput1_3: Only write haptics waveform reports when needed.
Signed-off-by: Rémi Bernon rbernon@codeweavers.com Signed-off-by: Alexandre Julliard julliard@winehq.org
---
dlls/xinput1_3/main.c | 96 +++++++++++++++++++++++++++++---------------------- 1 file changed, 54 insertions(+), 42 deletions(-)
diff --git a/dlls/xinput1_3/main.c b/dlls/xinput1_3/main.c index 0e5bd7283c4..c8ce6622dcb 100644 --- a/dlls/xinput1_3/main.c +++ b/dlls/xinput1_3/main.c @@ -286,11 +286,14 @@ static DWORD HID_set_state(struct xinput_controller *controller, XINPUT_VIBRATIO PHIDP_PREPARSED_DATA preparsed = controller->hid.preparsed; char *report_buf = controller->hid.output_report_buf; BYTE report_id = controller->hid.haptics_report; + BOOL update_rumble, update_buzz; NTSTATUS status;
if (!(controller->caps.Flags & XINPUT_CAPS_FFB_SUPPORTED)) return ERROR_SUCCESS;
+ update_rumble = (controller->vibration.wLeftMotorSpeed != state->wLeftMotorSpeed); controller->vibration.wLeftMotorSpeed = state->wLeftMotorSpeed; + update_buzz = (controller->vibration.wRightMotorSpeed != state->wRightMotorSpeed); controller->vibration.wRightMotorSpeed = state->wRightMotorSpeed;
if (!controller->enabled) return ERROR_SUCCESS; @@ -311,55 +314,64 @@ static DWORD HID_set_state(struct xinput_controller *controller, XINPUT_VIBRATIO return 0; }
- /* send haptics rumble report (left motor) */ - status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_INTENSITY, - state->wLeftMotorSpeed, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue INTENSITY returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, - controller->hid.haptics_rumble_ordinal, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, - 0, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); - if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + if (update_rumble) { - WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); - return GetLastError(); + /* send haptics rumble report (left motor) */ + status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_INTENSITY, + state->wLeftMotorSpeed, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue INTENSITY returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, + controller->hid.haptics_rumble_ordinal, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, + 0, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); + if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + { + WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); + return GetLastError(); + } }
- /* send haptics buzz report (right motor) */ - status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_INTENSITY, - state->wRightMotorSpeed, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue INTENSITY returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, - controller->hid.haptics_buzz_ordinal, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, - 0, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); - if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + if (update_buzz) { - WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); - return GetLastError(); + /* send haptics buzz report (right motor) */ + status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_INTENSITY, + state->wRightMotorSpeed, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue INTENSITY returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, + controller->hid.haptics_buzz_ordinal, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, + 0, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); + if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + { + WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); + return GetLastError(); + } }
- /* trigger haptics waveforms */ - status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, - controller->hid.haptics_none_ordinal, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); - status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, - 1, preparsed, report_buf, report_len); - if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); - if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + if (update_rumble || update_buzz) { - WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); - return GetLastError(); + /* trigger haptics waveforms */ + status = HidP_InitializeReportForID(HidP_Output, report_id, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_InitializeReportForID returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_MANUAL_TRIGGER, + controller->hid.haptics_none_ordinal, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue MANUAL_TRIGGER returned %#lx\n", status); + status = HidP_SetUsageValue(HidP_Output, HID_USAGE_PAGE_HAPTICS, 0, HID_USAGE_HAPTICS_REPEAT_COUNT, + 1, preparsed, report_buf, report_len); + if (status != HIDP_STATUS_SUCCESS) WARN("HidP_SetUsageValue REPEAT_COUNT returned %#lx\n", status); + if (!HidD_SetOutputReport(controller->device, report_buf, report_len)) + { + WARN("HidD_SetOutputReport failed with error %lu\n", GetLastError()); + return GetLastError(); + } }
return ERROR_SUCCESS;