wine-devel May 2007

wine-devel@winehq.org

134 participants
311 discussions

Re: Any way to get the current code besides git?
by EA Durbin 01 May '07

01 May '07

If you use the cvs web browser interface and view for example the dll msi and sort by age you will see the recent patches that have been applied show up here with the time they were applied. It is currently showing ones applied 8 hours ago. >From: sol11x86(a)comcast.net (Ben Taylor) >To: "EA Durbin" <ead1234(a)hotmail.com> >Subject: Re: Any way to get the current code besides git? >Date: Tue, 01 May 2007 20:39:04 +0000 > > -------------- Original message ---------------------- >From: "EA Durbin" <ead1234(a)hotmail.com> > > I had issues with older versions of git. > > > > I think cvs still works. > > > > http://winehq.org/site/cvs > >Yeah, but I'm not sure it's really current. It seemed to me >that the CVS code was just what was in the current release, >not what is current in git. I know because some patches I >had submitted and accepted to git weren't in the CVS download. > >Ben _________________________________________________________________ Interest Rates NEAR 39yr LOWS! $430,000 Mortgage for $1,299/mo - Calculate new payment http://www.lowermybills.com/lre/index.jsp?sourceid=lmb-9632-19132&moid=14888

1 0

Re: [try2] gdi32 : Completes WidenPath Implementation
by Laurent Vromman 01 May '07

01 May '07

I have sent this patch last week with the correction Alexandre asked me to do. It is still not on the repository. Is there anything wrong again ? Any comments are welcomed and will be applied if necessary. Laurent Laurent Vromman a écrit : > This second try includes Alexandre comments and removes some obsolete > FIXME > Changelog : > Completes WidenPath implementation. > WidenPath recognizes PS_JOINs and PS_ENDCAPs > > --- > dlls/gdi32/path.c | 298 > +++++++++++++++++++++++++++++++++++++++++------------ > 1 files changed, 230 insertions(+), 68 deletions(-)

2 1

Fw: [PATCH] CMD.exe: Remove code duplication for _splitpath
by Ann & Jason Edmeades 01 May '07

01 May '07

"Alexandre Julliard" <julliard(a)winehq.org> wrote in message news:<87d51qw39a.fsf(a)wine.dyndns.org>... > Jason Edmeades <us(a)edmeades.me.uk> writes: > > > Note: This makes cmd.exe pull in msvcrt, but so does native > > Native doesn't have a choice, but we do. Unless there are good reasons > to import msvcrt it's better to stick to standard libc. > Well, I am trying to convert cmd.exe to unicode, and was hoping to use the wide crt functions to replace e.g. strstr, strdup etc. This way it's a relatively simple transition from char to WCHAR without having to rewrite other functions. LstrcatW and lstrcpyW help, but there's other functions with no non-CRT equivalents. Does this change your mind? :-) Jason

2 1

Re: http access ot GIT?
by sol11x86＠comcast.net 01 May '07

01 May '07

-------------- Original message ---------------------- From: "H. Verbeet" <hverbeet(a)gmail.com> > On 01/05/07, Tom Spear <speeddymon(a)gmail.com> wrote: > > Did you try changing the git:// to http:// ? That is supposed to > > work thru port 80 with or without squid. YMMV > > > IIRC you need to set the http_proxy env. var correctly as well. > Yep. needed to update the remote.origin.url and then setup the http_proxy env variable, and it all worked. Ben

1 0

Re: http access ot GIT?
by Tom Spear 01 May '07

01 May '07

On 5/1/07, Ben Taylor <sol11x86(a)comcast.net> wrote: > > -------------- Original message ---------------------- > From: "Tom Spear" <speeddymon(a)gmail.com> > > On 5/1/07, Ben Taylor <sol11x86(a)comcast.net> wrote: > > > > > > Found myself behind an http-proxy and can't seem to find the magic > > > to use the http proxy to update my git archive. Is there a way to use > > > an http proxy (squid) with wine's git? > > > > What error are you getting? If no error, then if you to try to clone > > the whole repository, does it get to a point and then just sit there? > > > fatal: Unable to look up source.winehq.org (port 9418) (Name or service not konwn) > Cannot get the repository state from git://source.winehq.org/git/wine.git > > I've setup an http_proxy according to the documentation I've found on the > web. There's just not a lot out there that is specific to this conifguration. Did you try changing the git:// to http:// ? That is supposed to work thru port 80 with or without squid. YMMV -- Thanks Tom Check out this new 3D Instant Messenger called IMVU. It's the best I have seen yet! http://imvu.com/catalog/web_invitation.php?userId=1547373&from=power-email

2 1

Direct3D viewport problems
by Robert Fairlie 01 May '07

01 May '07

Hello, I'm having problems with DirectX viewports under Wine. I'm rendering to an offscreen surface and then copying the contents of the offscreen surface to a window. I first set the viewport to coincide with the window, i.e. vp.X = 0; vp.Y = 0; vp.Width = windowRect.Width(); vp.Height = windowRect.Height(); I render most of the the scene using the above viewport. I then need to draw an arrow in the bottom left hand corner of the of the window inside a square of side iSize, so I set: vp.X = 0; vp.Y = windowRect.Height() - iSize; vp.Width = iSize; vp.Height = iSize; Since iSize is only about a fifth of the window height, I would expect the arrow to be displayed at the bottom left of the window. but it's actually being displayed at the top left. The main part of the scene rendered with the first viewport settings is fine. The code does as expected in Windows, so I was wondering if anyone knows of any problems in this area. I'm also having problems with CD3DFont which I think might be related to this. Thanks for any advice, Robert Fairlie

3 2

Compiling 32bit winelib apps on x86_64
by Stefan Brüns 01 May '07

01 May '07

Hi, I had some problems compiling 32bit winelib apps on x86_64 - the tools tried to build for 64bit all the time. I had to change a few things in the winemaker created Makefile to make it work: <>_exe_LDFLAGS: added "-Wb,--as-cmd='as --32',--ld-cmd='ld -melf_i386'" CC: added "-m32" CXX: added "-m32" After applying the changes, everything worked as expected. Greetings, Stefan -- Stefan Brüns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch@gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725

1 0

http access ot GIT?
by sol11x86＠comcast.net 01 May '07

01 May '07

Found myself behind an http-proxy and can't seem to find the magic to use the http proxy to update my git archive. Is there a way to use an http proxy (squid) with wine's git? Ben

2 1

Offer to upgrade the winehq Bugzilla
by Jan Zerebecki 01 May '07

01 May '07

The guy (nick mkanat) who admins buggbot on freenode (see ##bugzilla-world ) said he would upgrade our bugzilla for us, paid by his company "in exchange for a link in the footer or front page, just mentioning that we did the upgrade". I'm not sure how much a link on the bugzilla page footer/menu is worth in advertising revenue. There is already one on the wiki. So maybe something like that link for a year in exchange for the full upgrade work (producing and testing the diff for cvs and the upgrade sql-script and fixing anything that breaks) sounds like a fair deal. What should I respond? Jan

2 1

How do I put a table of contents on one of our wiki pages?
by Scott Ritchie 01 May '07

01 May '07

The new FAQ is coming along fairly well, however it obviously needs a table of contents at this point. I combed through the documentation, but can't find anything. Does someone know? Thanks, Scott Ritchie

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel May 2007