wine-devel August 2022

23 participants
80 discussions

Wine Source build on native wchar_t 4 bytes
by Mahin Pandya 05 Dec '22

05 Dec '22

Hello All, We are trying to build Wine Source on Linux with native wchar_t size 4 bytes (instead of 2 bytes), is there any way it can be done? I started with doing following changes: diff --git a/tools/winapi/winapi_test b/tools/winapi/winapi_test index b9628e8..91daac3 100644 --- a/tools/winapi/winapi_test +++ b/tools/winapi/winapi_test @@ -206,7 +206,11 @@ sub _find_align_kind_size($) { $align = 2; $kind = "signed"; $size = 2; - } elsif (/^(?:char16_t|wchar_t|USHORT|WCHAR|WORD)$/) { + } elsif (/^(?:wchar_t|WCHAR)$/) { + $align = 4; + $kind = "unsigned"; + $size = 4; + } elsif (/^(?:char16_t|USHORT|WORD|WCHAR_nt)$/) { $align = 2; $kind = "unsigned"; $size = 2; Also started changing some of headers e.g. winnt.h - removed "typedef unsigned short WCHAR;" Any pointers/suggestion are welcome. Thanking you. regards, Mahin

6 11

[PATCH 1/2] qedit/tests: Check the Sample Grabber's buffer during and after flushing.
by Gabriel Ivăncescu 04 Oct '22

04 Oct '22

Signed-off-by: Gabriel Ivăncescu <gabrielopcode(a)gmail.com> --- dlls/qedit/tests/samplegrabber.c | 234 +++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) diff --git a/dlls/qedit/tests/samplegrabber.c b/dlls/qedit/tests/samplegrabber.c index 8e68e3e..e66180f 100644 --- a/dlls/qedit/tests/samplegrabber.c +++ b/dlls/qedit/tests/samplegrabber.c @@ -1036,6 +1036,239 @@ static void test_connect_pin(void) ok(!ref, "Got outstanding refcount %d.\n", ref); } +struct frame_thread_params +{ + IMemInputPin *sink; + IMediaSample *sample; + DWORD delay; +}; + +static DWORD WINAPI frame_thread(void *arg) +{ + struct frame_thread_params *params = arg; + HRESULT hr; + + if (params->delay) + { + if (winetest_debug > 1) trace("%04x: Sleeping %u ms.\n", GetCurrentThreadId(), params->delay); + Sleep(params->delay); + } + if (winetest_debug > 1) trace("%04x: Sending frame.\n", GetCurrentThreadId()); + hr = IMemInputPin_Receive(params->sink, params->sample); + if (winetest_debug > 1) trace("%04x: Returned %#x.\n", GetCurrentThreadId(), hr); + IMediaSample_Release(params->sample); + free(params); + return hr; +} + +static HANDLE send_frame_time(IMemInputPin *sink, REFERENCE_TIME start_time, unsigned char color, DWORD delay) +{ + struct frame_thread_params *params = malloc(sizeof(*params)); + IMemAllocator *allocator; + REFERENCE_TIME end_time; + IMediaSample *sample; + HANDLE thread; + HRESULT hr; + BYTE *data; + + hr = IMemInputPin_GetAllocator(sink, &allocator); + ok(hr == S_OK, "Got hr %#x.\n", hr); + + hr = IMemAllocator_GetBuffer(allocator, &sample, NULL, NULL, 0); + if (hr == VFW_E_NOT_COMMITTED) + { + IMemAllocator_Commit(allocator); + hr = IMemAllocator_GetBuffer(allocator, &sample, NULL, NULL, 0); + } + ok(hr == S_OK, "Got hr %#x.\n", hr); + + hr = IMediaSample_GetPointer(sample, &data); + ok(hr == S_OK, "Got hr %#x.\n", hr); + memset(data, 0x55, 32 * 16 * 2); + + hr = IMediaSample_SetActualDataLength(sample, 32 * 16 * 2); + ok(hr == S_OK, "Got hr %#x.\n", hr); + + start_time *= 10000000; + end_time = start_time + 10000000; + hr = IMediaSample_SetTime(sample, &start_time, &end_time); + ok(hr == S_OK, "Got hr %#x.\n", hr); + + params->sink = sink; + params->sample = sample; + params->delay = delay; + thread = CreateThread(NULL, 0, frame_thread, params, 0, NULL); + + IMemAllocator_Release(allocator); + return thread; +} + +static HANDLE send_frame(IMemInputPin *sink, DWORD delay) +{ + return send_frame_time(sink, 0, 0x55, delay); /* purple */ +} + +static HRESULT join_thread_(int line, HANDLE thread) +{ + DWORD ret; + ok_(__FILE__, line)(!WaitForSingleObject(thread, 1000), "Wait failed.\n"); + GetExitCodeThread(thread, &ret); + CloseHandle(thread); + return ret; +} +#define join_thread(a) join_thread_(__LINE__, a) + +static void test_buffer_flush(void) +{ + AM_MEDIA_TYPE req_mt = + { + .majortype = MEDIATYPE_Video, + .subtype = MEDIASUBTYPE_RGB565, + .formattype = FORMAT_VideoInfo, + .bTemporalCompression = TRUE, + }; + LONG buf[(32 * 16 * 2) / sizeof(LONG)], size = sizeof(buf); + IPin *sink, *source, *renderer_pin; + struct testfilter testsource; + ISampleGrabber *grabber; + IMediaControl *control; + IFilterGraph2 *graph; + IMemInputPin *input; + IBaseFilter *filter; + OAFilterState state; + IMediaFilter *mf; + HANDLE thread; + DWORD ticks; + unsigned i; + HRESULT hr; + ULONG ref; + + testfilter_init(&testsource); + CoCreateInstance(&CLSID_FilterGraph, NULL, CLSCTX_INPROC_SERVER, + &IID_IFilterGraph2, (void **)&graph); + CoCreateInstance(&CLSID_NullRenderer, NULL, CLSCTX_INPROC_SERVER, + &IID_IBaseFilter, (void **)&filter); + IFilterGraph2_AddFilter(graph, filter, L"sink"); + IBaseFilter_FindPin(filter, L"In", &renderer_pin); + IBaseFilter_Release(filter); + + filter = create_sample_grabber(); + IFilterGraph2_AddFilter(graph, &testsource.filter.IBaseFilter_iface, L"source"); + IFilterGraph2_AddFilter(graph, filter, L"sample grabber"); + IBaseFilter_FindPin(filter, L"In", &sink); + IBaseFilter_FindPin(filter, L"Out", &source); + IBaseFilter_QueryInterface(filter, &IID_ISampleGrabber, (void **)&grabber); + IFilterGraph2_QueryInterface(graph, &IID_IMediaControl, (void **)&control); + IPin_QueryInterface(sink, &IID_IMemInputPin, (void **)&input); + + ISampleGrabber_SetMediaType(grabber, &req_mt); + ISampleGrabber_SetBufferSamples(grabber, TRUE); + + testsource.sink_mt = &req_mt; + hr = IFilterGraph2_ConnectDirect(graph, &testsource.source.pin.IPin_iface, sink, &req_mt); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = IFilterGraph2_ConnectDirect(graph, source, renderer_pin, &req_mt); + ok(hr == S_OK, "Got hr %#x.\n", hr); + IPin_Release(renderer_pin); + + IFilterGraph2_QueryInterface(graph, &IID_IMediaFilter, (void **)&mf); + IMediaFilter_SetSyncSource(mf, NULL); + IMediaFilter_Release(mf); + + hr = IMemInputPin_ReceiveCanBlock(input); + ok(hr == S_OK, "Got hr %#x.\n", hr); + + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ok(hr == VFW_E_WRONG_STATE, "Got hr %#x.\n", hr); + + hr = IMediaControl_Pause(control); + ok(hr == S_FALSE, "Got hr %#x.\n", hr); + hr = IMediaControl_GetState(control, 0, &state); + ok(hr == VFW_S_STATE_INTERMEDIATE, "Got hr %#x.\n", hr); + + thread = send_frame(input, 0); + hr = IMediaControl_GetState(control, 1000, &state); + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(WaitForSingleObject(thread, 100) == WAIT_TIMEOUT, "Thread should block in Receive().\n"); + + for (i = 0; i < 3; i++) + { + ticks = GetTickCount(); + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ticks = GetTickCount() - ticks; + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(ticks < 100, "Got %u ticks.\n", ticks); + ok(size == sizeof(buf), "Got size %d.\n", size); + } + + hr = IMediaControl_Stop(control); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = join_thread(thread); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = IMediaControl_GetState(control, 1000, &state); + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(state == State_Stopped, "Got state %d.\n", state); + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ok(hr == S_OK, "Got hr %#x.\n", hr); + + hr = IMediaControl_Pause(control); + ok(hr == S_FALSE, "Got hr %#x.\n", hr); + hr = IMediaControl_GetState(control, 0, &state); + ok(hr == VFW_S_STATE_INTERMEDIATE, "Got hr %#x.\n", hr); + + thread = send_frame(input, 0); + hr = IMediaControl_GetState(control, 1000, &state); + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(WaitForSingleObject(thread, 100) == WAIT_TIMEOUT, "Thread should block in Receive().\n"); + + for (i = 0; i < 3; i++) + { + ticks = GetTickCount(); + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ticks = GetTickCount() - ticks; + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(ticks < 100, "Got %u ticks.\n", ticks); + ok(size == sizeof(buf), "Got size %d.\n", size); + } + + IPin_BeginFlush(sink); + hr = join_thread(thread); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ok(hr == S_OK, "Got hr %#x.\n", hr); + IPin_EndFlush(sink); + + hr = IMediaControl_GetState(control, 0, &state); + todo_wine ok(hr == VFW_S_STATE_INTERMEDIATE, "Got hr %#x.\n", hr); + + ticks = GetTickCount(); + thread = send_frame(input, 150); + hr = ISampleGrabber_GetCurrentBuffer(grabber, &size, buf); + ticks = GetTickCount() - ticks; + ok(hr == S_OK, "Got hr %#x.\n", hr); + ok(ticks < 100, "Got %u ticks.\n", ticks); + ok(size == sizeof(buf), "Got size %d.\n", size); + + hr = IMediaControl_GetState(control, 1000, &state); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = IMediaControl_Stop(control); + ok(hr == S_OK, "Got hr %#x.\n", hr); + hr = join_thread(thread); + todo_wine ok(hr == S_OK, "Got hr %#x.\n", hr); + + IPin_Release(sink); + IPin_Release(source); + IMemInputPin_Release(input); + IMediaControl_Release(control); + ref = IFilterGraph2_Release(graph); + ok(!ref, "Got outstanding refcount %d.\n", ref); + ISampleGrabber_Release(grabber); + ref = IBaseFilter_Release(filter); + ok(!ref, "Got outstanding refcount %d.\n", ref); + ref = IBaseFilter_Release(&testsource.filter.IBaseFilter_iface); + ok(!ref, "Got outstanding refcount %d.\n", ref); +} + START_TEST(samplegrabber) { IBaseFilter *filter; @@ -1059,6 +1292,7 @@ START_TEST(samplegrabber) test_aggregation(); test_media_types(); test_connect_pin(); + test_buffer_flush(); CoUninitialize(); } -- 2.21.0

5 7

[vkd3d] Handling object components within the HLSL compiler.
by Francisco Casas 20 Sep '22

20 Sep '22

Hello, I write this update on what I am working on, because I think it introduces some architectural changes that may be good to discuss, or at least mention. Sorry if this text is a bit dense, I hope to send all this as a merge request in a couple of days from now. Albeit we may want to avoid merging before the code freeze ends. More than a week ago, I started trying to implement SM1 resource loads. For this, in particular, it is necessary to infer each sampler's dimensions from usage (a use in a tex2D implies that the sampler is 2D, if not previously declared as such). This gets complicated when there are arrays of samplers, because each sampler component can have a different dimension, and yet being part of the same variable. For solving this I tried introducing a field to allow us to store data for each component within hlsl_ir_var. But this turned to be a complicated solution. As now, we lost the component information in the derefs once we start working with register offsets. I also wanted to have per-component data because I realized that, in general, we are not handling object components properly when they are part of a larger array/struct. But then I thought on an alternative solution: adding a compiler pass to promote each object component within a large variable to a new standalone variable, and prepend a store from this standalone variable to the the original path of the component within the large variable; relying on copy-prop and dce so that all references that refer to these components end up pointing to the new standalone variable. This allows us to use the fields of the hlsl_ir_var (in particular, the register allocation) for each object component, which solves the problem. While that strategy works, I then realized that we cannot use it when targeting SM1 profiles, because we wouldn't be replicating the CTAB (which doesn't introduce a new variable for each component in multi-dimensional object arrays, just increases its register size). SM4 on the other hand seems to do this, separating each sampler and texture as its own variable in the RDEF block. My conclusion then, is that it is a good idea to separate each object component into its own variable in SM4 (as long they are named with the correct subscripts, like "foo.tex[3]"). And while we can't do that in SM1, the good news is that SM1 doesn't allow objects as components of larger types except within (possible multi-dimensional) arrays. Samplers and Textures cannot be components of structs within SM1 profiles, so we only have to support those cases in hlsl_sm1.c. This approach also has the benefit that now, all the component register allocation information should be representable using the fields in the hlsl_ir_var struct and the register size data within hlsl_type [1], since each variable should only care about a single register type now. Storing register allocation data component-wise should not be necessary. So I am implementing a series of patches to ensure that: * When targeting SM4 profiles, all object components are separated into a sole variable. * When targeting SM1 profiles, it is not allowed to declare objects as components of structs; so they will either be a sole variable, or belong to either a (possibly multi-dimensional) array of elements of the same type, as declared within the shader. * SM1 resource loads work. My plan for this series, in terms of patches is: * Parse the tex3D() intrinsic. (already made by zf) * Parse the tex2D() intrinsic. (already made by zf) * Validate that object are not components of structs in SM1. * Properly allocate registers for object arrays for SM1. * Infer sampler register dimensions and write declarations in SM1. * Write resource loads in SM1. * Separate objects as standalone variables in SM4. * Lower combined samplers to separate sampler and texture objects for SM4. (already made by zf) * Lower separate sampler and texture objects to combined samplers for SM1. (already made by zf) It remains to check if object arrays are handled properly in the last two [2], or modify these patches accordingly. Best regards, Francisco. --- [1] I know we intend to remove this field later, when we move register allocation to each sm*_write.c, but I think we probably want to replace those precomputed register offset fields with equivalent SM-specific functions that retrieve the register offset for each component. [2] In SM1 profiles, when there are texture arrays and they are used together with samplers, only one variable is created (not one for each pair of components). This is allowed: ``` Texture2D tex[3][2]; sampler sam; float4 main() : SV_TARGET { return tex[0][1].Sample(sam, float2(1, 2)) + tex[1][0].Sample(sam, float2(1, 2)); } ``` This is allowed (but "not yet implemented" in fxc 9 and 10) ``` Texture2D tex; sampler sam[2][3]; float4 main() : SV_TARGET { return tex.Sample(sam[0][2], float2(1, 2)) + tex.Sample(sam[1][0], float2(1, 2)); } ``` This is not allowed: ``` Texture2D tex[3]; sampler sam[4]; float4 PSMain() : SV_TARGET { return tex[1].Sample(sam[1], float2(1, 2)) + tex[2].Sample(sam[0], float2(1, 2)); } ``` gives: ``` error X4581: Cannot use texture arrays on DX9 targets with multiple samplers. ```

2 5

RFC: Allow marking unreliable tests as flaky.
by Francois Gouget 02 Sep '22

02 Sep '22

Wine has many unreliable tests which makes it hard to know whether a patch causes new failures. So one proposal was to mark unreliable tests as flaky, and have a mode where flaky failures can ignored by setting $WINETEST_ALLOW_FLAKY. So one would be able to apply a patch, run 'WINETEST_ALLOW_FLAKY=1 make test' and if that fails that means the patch introduces a new failure. The way it works is that when a flaky test fails the message is 'Flaky failed...' instead of 'Test failed...'. I also added the count of flaky failures to the summary line. So the flaky failures are not totally swept under the rug. The main difference is that if $WINETEST_ALLOW_FLAKY is set, the exit code is 0 if the only failures are flaky ones. That still leaves some open questions though: * Should the message be 'Test failed' instead of 'Flaky failed' when $WINETEST_ALLOW_FLAKY is not set? I opted for the latter because it adds information that the failed test has been marked as flaky. * Should tests that fail systematically on some platforms but not others (for instance specific Windows versions, specific locales, specific GPUs) be marked as flaky? Or should flaky be reserved for tests that fail randomly? * What about failures where the message is different every time so that the failure always looks new? Should these not be marked as flaky since it only impacts the TestBot? * On a related note the patch below has flaky_windows and flaky_wine macros. Is that too fine grained? Maybe we don't want to run the risk of marking a test as flaky_windows only to discover later that it can also fail in Wine? But conversely, wouldn't it be valuable to know that a test is only flaky in Wine and not in Windows? Note: flaky_windows is a bit long but I was worried that flaky_win would be too similar to flaky_wine. * I decided having flaky_{windows,wine}_if() macros would be overkill. * How does one know a flaky directive can be removed? * Is it allowed to submit a patch that contains new flaky directives? * Also the flaky directive cannot deal with tests that randomly crash, prematurely exit, or time out. These issues are rarer so maybe we can hope they can all be fixed? * How does this impact bug 48912, aka "Allow blacklisting unreliable and always new failures"? https://bugs.winehq.org/show_bug.cgi?id=48912 * test.winehq.org and the TestBot will need to be updated to highlight the new messages and, more importantly, to recognize the new summary line. The patch is below and I bundled it with tweaks to a few tests for illustration purposes: d3d8:device - Failure happens on Windows (rarely) and Wine. dinput:mouse - Failure happens on Windows 7 and Wine. mmdevapi:render - Timing issue. schedsvc:atsvcapi - Wine-only failure. --- dlls/d3d8/tests/device.c | 2 +- dlls/dinput/tests/mouse.c | 2 +- dlls/mmdevapi/tests/render.c | 2 +- dlls/schedsvc/tests/atsvcapi.c | 2 +- include/wine/test.h | 78 +++++++++++++++++++++++++++++----- 5 files changed, 72 insertions(+), 14 deletions(-) diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c index cb1e83b64b3..f0e8c27fafd 100644 --- a/dlls/d3d8/tests/device.c +++ b/dlls/d3d8/tests/device.c @@ -3356,7 +3356,7 @@ static void test_wndproc(void) expect_messages = sc_maximize_messages; SendMessageA(focus_window, WM_SYSCOMMAND, SC_MAXIMIZE, 0); - ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it.\n", + flaky ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it.\n", expect_messages->message, expect_messages->window); expect_messages = NULL; flush_events(); diff --git a/dlls/dinput/tests/mouse.c b/dlls/dinput/tests/mouse.c index 8be808e5da6..dcb5453a825 100644 --- a/dlls/dinput/tests/mouse.c +++ b/dlls/dinput/tests/mouse.c @@ -156,7 +156,7 @@ static void test_acquire(IDirectInputA *pDI, HWND hwnd) SetActiveWindow( hwnd ); hr = IDirectInputDevice_Acquire(pMouse); - ok(hr == S_OK, "Acquire() failed: %#lx\n", hr); + flaky ok(hr == S_OK, "Acquire() failed: %#lx\n", hr); mouse_event(MOUSEEVENTF_MOVE, 10, 10, 0, 0); cnt = 1; diff --git a/dlls/mmdevapi/tests/render.c b/dlls/mmdevapi/tests/render.c index 4e19b91c5f5..882be89b7ff 100644 --- a/dlls/mmdevapi/tests/render.c +++ b/dlls/mmdevapi/tests/render.c @@ -1098,7 +1098,7 @@ static void test_clock(int share) ok(pos == 0, "GetPosition returned non-zero pos before being started\n"); hr = IAudioClient_Start(ac); /* #1 */ - ok(hr == S_OK, "Start failed: %08lx\n", hr); + flaky ok(hr == S_OK, "Start failed: %08lx\n", hr); Sleep(100); slept += 100; diff --git a/dlls/schedsvc/tests/atsvcapi.c b/dlls/schedsvc/tests/atsvcapi.c index 3aaad8b5cfe..83774804b40 100644 --- a/dlls/schedsvc/tests/atsvcapi.c +++ b/dlls/schedsvc/tests/atsvcapi.c @@ -168,7 +168,7 @@ START_TEST(atsvcapi) skip_tests_delete: ret = NetrJobDel(server_name, jobid, jobid); - ok(ret == ERROR_SUCCESS, "NetrJobDel error %lu\n", ret); + flaky_wine ok(ret == ERROR_SUCCESS, "NetrJobDel error %lu\n", ret); skip_tests: SetUnhandledExceptionFilter(old_exception_filter); diff --git a/include/wine/test.h b/include/wine/test.h index 01ba81f4857..422ba3dce38 100644 --- a/include/wine/test.h +++ b/include/wine/test.h @@ -50,6 +50,9 @@ extern int winetest_time; /* running in interactive mode? */ extern int winetest_interactive; +/* always count flaky tests as successful (BOOL) */ +extern int winetest_allow_flaky; + /* report successful tests (BOOL) */ extern int winetest_report_success; @@ -117,6 +120,13 @@ extern void winetest_pop_context(void); #define trace trace_(__FILE__, __LINE__) #define wait_child_process wait_child_process_(__FILE__, __LINE__) +#define flaky_if(is_flaky) for (winetest_start_flaky(is_flaky); \ + winetest_loop_flaky(); \ + winetest_end_flaky()) +#define flaky flaky_if(1) +#define flaky_windows flaky_if(!strcmp(winetest_platform, "windows")) +#define flaky_wine flaky_if(!strcmp(winetest_platform, "wine")) + #define todo_if(is_todo) for (winetest_start_todo(is_todo); \ winetest_loop_todo(); \ winetest_end_todo()) @@ -200,6 +210,9 @@ int winetest_interactive = 0; /* current platform */ const char *winetest_platform = "windows"; +/* always count flaky tests as successful (BOOL) */ +int winetest_allow_flaky; + /* report successful tests (BOOL) */ int winetest_report_success = 0; @@ -214,6 +227,7 @@ static const struct test *current_test; /* test currently being run */ static LONG successes; /* number of successful tests */ static LONG failures; /* number of failures */ +static LONG flaky_failures; /* number of failures inside flaky block */ static LONG skipped; /* number of skipped test chunks */ static LONG todo_successes; /* number of successful tests inside todo block */ static LONG todo_failures; /* number of failures inside todo block */ @@ -229,6 +243,8 @@ struct tls_data { const char* current_file; /* file of current check */ int current_line; /* line of current check */ + unsigned int flaky_level; /* current flaky nesting level */ + int flaky_do_loop; unsigned int todo_level; /* current todo nesting level */ int todo_do_loop; char *str_pos; /* position in debug buffer */ @@ -355,9 +371,18 @@ int winetest_vok( int condition, const char *msg, va_list args ) { if (condition) { - winetest_print_context( "Test succeeded inside todo block: " ); - vprintf(msg, args); - InterlockedIncrement(&todo_failures); + if (data->flaky_level) + { + winetest_print_context( "Flaky succeeded inside todo block: " ); + vprintf(msg, args); + InterlockedIncrement(&flaky_failures); + } + else + { + winetest_print_context( "Test succeeded inside todo block: " ); + vprintf(msg, args); + InterlockedIncrement(&todo_failures); + } return 0; } else @@ -381,9 +406,18 @@ int winetest_vok( int condition, const char *msg, va_list args ) { if (!condition) { - winetest_print_context( "Test failed: " ); - vprintf(msg, args); - InterlockedIncrement(&failures); + if (data->flaky_level) + { + winetest_print_context( "Flaky failed: " ); + vprintf(msg, args); + InterlockedIncrement(&flaky_failures); + } + else + { + winetest_print_context( "Test failed: " ); + vprintf(msg, args); + InterlockedIncrement(&failures); + } return 0; } else @@ -456,6 +490,27 @@ void winetest_win_skip( const char *msg, ... ) va_end(valist); } +void winetest_start_flaky( int is_flaky ) +{ + struct tls_data *data = get_tls_data(); + data->flaky_level = (data->flaky_level << 1) | (is_flaky != 0); + data->flaky_do_loop=1; +} + +int winetest_loop_flaky(void) +{ + struct tls_data *data = get_tls_data(); + int do_flaky=data->flaky_do_loop; + data->flaky_do_loop=0; + return do_flaky; +} + +void winetest_end_flaky(void) +{ + struct tls_data *data = get_tls_data(); + data->flaky_level >>= 1; +} + void winetest_start_todo( int is_todo ) { struct tls_data *data = get_tls_data(); @@ -601,14 +656,16 @@ static int run_test( const char *name ) printf( "%04x:%s:%s Silenced %d todos, %d skips and %d traces.\n", (UINT)GetCurrentProcessId(), test->name, winetest_elapsed(), (UINT)muted_todo_successes, (UINT)muted_skipped, (UINT)muted_traces); - printf( "%04x:%s:%s %d tests executed (%d marked as todo, %d %s), %d skipped.\n", + printf( "%04x:%s:%s %d tests executed (%d marked as todo, %d as flaky, %d %s), %d skipped.\n", (UINT)GetCurrentProcessId(), test->name, winetest_elapsed(), - (UINT)(successes + failures + todo_successes + todo_failures), - (UINT)todo_successes, (UINT)(failures + todo_failures), + (UINT)(successes + failures + flaky_failures + todo_successes + todo_failures), + (UINT)todo_successes, (UINT)flaky_failures, (UINT)(failures + todo_failures), (failures + todo_failures != 1) ? "failures" : "failure", (UINT)skipped ); } - status = (failures + todo_failures < 255) ? failures + todo_failures : 255; + status = failures + todo_failures; + if (!winetest_allow_flaky) status += flaky_failures; + if (status > 255) status = 255; return status; } @@ -665,6 +722,7 @@ int main( int argc, char **argv ) if (GetEnvironmentVariableA( "WINETEST_DEBUG", p, sizeof(p) )) winetest_debug = atoi(p); if (GetEnvironmentVariableA( "WINETEST_INTERACTIVE", p, sizeof(p) )) winetest_interactive = atoi(p); + if (GetEnvironmentVariableA( "WINETEST_ALLOW_FLAKY", p, sizeof(p) )) winetest_allow_flaky = atoi(p); if (GetEnvironmentVariableA( "WINETEST_REPORT_SUCCESS", p, sizeof(p) )) winetest_report_success = atoi(p); if (GetEnvironmentVariableA( "WINETEST_TIME", p, sizeof(p) )) winetest_time = atoi(p); winetest_last_time = winetest_start_time = GetTickCount(); -- 2.30.2

7 12

Puzzling IPrincipal:UserId check in taskschd
by Francois Gouget 31 Aug '22

31 Aug '22

So I'm a bit puzzled by this check in taskschd/task.c's write_principal(): hr = IPrincipal_get_UserId(principal, &bstr); if (hr == S_OK && lstrlenW(bstr)) { hr = write_text_value(stream, L"UserId", bstr); What's puzzling to me is the lstrlenW(bstr) check: * write_principal() has no such check for Id, GroupId, DisplayName and RunLevel. Maybe that's because they are guaranteed to be set and non empty but I could not find any documentation saying so and they are not implemented in Wine. * write_registration_info() is very similar but checks bstr, not what is in effect *bstr: hr = IRegistrationInfo_get_Source(reginfo, &bstr); if (hr == S_OK && bstr) { hr = write_text_value(stream, L"Source", bstr); * We don't seem to have tests showing how this works. I would expect all these property getters to work the same way. So would something like that make more sense? hr = IPrincipal_get_UserId(principal, &bstr); if (hr == S_OK && bstr) { hr = write_text_value(stream, L"UserId", bstr); Dmitry: Do you remember if you wrote the lstrlenW(bstr) check because of some test you did? -- Francois Gouget <fgouget(a)free.fr> http://fgouget.free.fr/ Computers are like airconditioners They stop working properly if you open WINDOWS

2 1

Whenever i use wine this message pop up and the application doesn't run please any help
by anthonyuser33 29 Aug '22

29 Aug '22

Sent from my Galaxy

1 0

Wine staging 7.16 release
by Alistair Leslie-Hughes 29 Aug '22

29 Aug '22

Binary packages for various distributions will be available from: https://www.winehq.org/download Summary since last release * Rebased to current wine 7.16 (531 patches are applied to wine vanilla) Upstreamed (Either directly from staging or fixed with a similar patch). * wined3d: Use wined3d_array_reserve() in wined3d_adapter_create_output(). * dsdmo: Add Echo FX Support * dsdmo: Add Compressor FX Support * ddraw: Don't set HWTRANSFORMANDLIGHT flag on d3d7 RGB device. Added: * None Updated: * none Where can you help * Run Steam/Battle.net/GOG/UPlay/Epic * Test your favorite game. * Test your favorite applications. * Improve staging patches and get them accepted upstream. As always, if you find a bug, please report it via https://bugs.winehq.org Best Regards Alistair.

1 0

[PATCH 1/2] readme: Update Finnish translation.
by Lauri Kenttä 29 Aug '22

29 Aug '22

Signed-off-by: Lauri Kenttä <lauri.kentta(a)gmail.com> --- documentation/README.fi | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/documentation/README.fi b/documentation/README.fi index e459bbc779a..00af959c033 100644 --- a/documentation/README.fi +++ b/documentation/README.fi @@ -146,6 +146,8 @@ Kysymyksiä: Wiki: Wine Wiki on osoitteessa https://wiki.winehq.org/. +Gitlab: Winen kehitykseen voi osallistua sivustolla https://gitlab.winehq.org + Postituslistat: Winen käyttäjille ja kehittäjille on joitakin postituslistoja, sivulla https://www.winehq.org/forums kerrotaan niistä lisää. @@ -157,14 +159,6 @@ Virheet: IRC: Online-apua voi saada kanavalta #WineHQ palvelimella irc.libera.chat. -Git: Winen tämänhetkinen kehitysversio on jaossa Git-järjestelmän kautta. - Sivulla https://www.winehq.org/git kerrotaan tästä lisää. - - -Jos lisäät jotain tai korjaat jonkin virheen, lähetä toki muutoksesi -(mieluiten komennon git-format-patch avulla) listalle wine-devel(a)winehq.org, -jotta se voidaan lisätä Winen seuraavaan versioon. - -- Alkuperäisen version tekstistä on kirjoittanut Alexandre Julliard -- 2.37.2

2 2

Upcoming vkd3d 1.5 release.
by Henri Verbeet 24 Aug '22

24 Aug '22

Hi all, As previously discussed, we'd like to release vkd3d 1.5 in about 4 weeks. Practically speaking, that means that as we're nearing that date, the vkd3d tree is going to become progressively frozen, starting today. Now is the time to test your games for any regressions, review any API changes since vkd3d 1.4, review/improve the API documentation, and so on. If you're working on any larger features or architectural changes, ideally you'd have those ready to merge shortly after the 1.5 release, so that they'll make it into the 1.6 release, tentatively planned for early December. Regards, Henri

1 0

wine-devel moved to Mailman3
by Jeremy Newman 22 Aug '22

22 Aug '22

This list has been migrated to a new interface. To manage your subscription go here: https://www.winehq.org/mailman3/postorius/lists/wine-devel.winehq.org/ To view the archives go here: https://www.winehq.org/mailman3/hyperkitty/list/[email protected]/ The old archives will remain online to preserve links. -N

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel August 2022