wine-devel November 2009

wine-devel@winehq.org

91 participants
249 discussions

Re: RFC : query.c d3d9 test...
by chris ahrendt 24 Nov '09

24 Nov '09

Roderick Colenbrander wrote: > On Mon, Nov 23, 2009 at 9:23 PM, Stefan Dösinger <stefandoesinger(a)gmx.at> wrote: >> Am 23.11.2009 um 21:00 schrieb chris ahrendt: >>> The test fails with : >>> >>> query.c:224: Test failed: IDirect3DQuery9_GetData a 2nd time on a ended query returned 00000001 >> This is Windows, right? Which GPU/driver? >> >> My guess is that its ok to modify the test to accept both results. Ie, ok(hr == S_OK | hr == S_FALSE, "..."); >> > > I see it all the time on my Radeon 3400 on Wine. > > Roderick > > this is the wine test I run on linux.... and I get this all the time on my Radeon as well... which is why I was asking here... do I need to open a bug on the test to fix it since what I documented is the correct behavior.... chris

1 0

Re: [PATCH] ole32: Some missing error checking in FileMonikerImpl_CommonPrefixWith (Coverity)
by Rob Shearman 23 Nov '09

23 Nov '09

2009/11/23 Marcus Meissner <marcus(a)jet.franken.de>: > if(mkSys==MKSYS_FILEMONIKER){ > HRESULT ret; > > - CreateBindCtx(0,&pbind); > + ret = CreateBindCtx(0,&pbind); > + if (FAILED(ret)) > + return ret; > > /* create a string based on common part of the two paths */ > > - IMoniker_GetDisplayName(iface,pbind,NULL,&pathThis); > - IMoniker_GetDisplayName(pmkOther,pbind,NULL,&pathOther); > + ret = IMoniker_GetDisplayName(iface,pbind,NULL,&pathThis); > + if (FAILED(ret)) > + return ret; pbind is leaked here. > + ret = IMoniker_GetDisplayName(pmkOther,pbind,NULL,&pathOther); > + if (FAILED(ret)) > + return ret; pbind and pathThis are leaked here. > > nb1=FileMonikerImpl_DecomposePath(pathThis,&stringTable1); > + if (FAILED(nb1)) > + return nb1; Ditto plus pathOther. > nb2=FileMonikerImpl_DecomposePath(pathOther,&stringTable2); > + if (FAILED(nb2)) > + return nb2; Ditto plus stringTable1. > > if (nb1==0 || nb2==0) > return MK_E_NOPREFIX; > > commonPath=HeapAlloc(GetProcessHeap(),0,sizeof(WCHAR)*(min(lstrlenW(pathThis),lstrlenW(pathOther))+1)); > + if (!commonPath) > + return E_OUTOFMEMORY; Ditto plus stringTable2. > > *commonPath=0; -- Rob Shearman

1 0

Re: msvcrt: Calculate floating point decimals in internally used long double precision.
by Austin English 23 Nov '09

23 Nov '09

On Mon, Nov 23, 2009 at 2:43 PM, Gregor Schneider <grschneider(a)gmail.com> wrote: > This patch proposes to calculate the fp digits in scanf with the internally > used long double precision instead of simple float accuracy. > With the current implementation small errors are added with each calculation > step originating from the used float type. > This becomes obvious when parsing to more precise fp types like double or > long double and outputting a large number of digits from the created number. > Example code like the following > > double d; > swscanf(L"3.1415", L"%lf", &d); > wprintf(L"%3.12f\n", d); > > produces an output of "3.141500000478", while "3.141500000000" would be the > expected result with this precision. The attached patch fixes this problem. Please add a testcase for this behavior, to prevent regressions. -- -Austin

1 0

RFC : query.c d3d9 test...
by chris ahrendt 23 Nov '09

23 Nov '09

Looking at the wine test results for the following test: query.c in the d3d9 tests directory... hr = IDirect3DQuery9_GetData(pQuery, data, IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH); ok(hr == S_OK, "IDirect3DQuery9_GetData on a ended query returned %08x\n", hr); hr = IDirect3DQuery9_GetData(pQuery, data, IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH); ok(hr == S_OK, "IDirect3DQuery9_GetData a 2nd time on a ended query returned %08x\n", hr); the MSDK says the following : IDirect3DQuery9::GetData Polls a queried resource to get the query state or a query result. For more information about queries, see Queries (Direct3D 9). Return Values The return type identifies the query state (see Queries (Direct3D 9)). The method returns S_OK if the query data is available and S_FALSE if it is not. These are considered successful return values. If the method fails when D3DGETDATA_FLUSH is used, the return value can be D3DERR_DEVICELOST. The test fails with : query.c:224: Test failed: IDirect3DQuery9_GetData a 2nd time on a ended query returned 00000001 which is a S_FALSE (1) which just means the data is not available... which according to the MSDN site is an ok value to return... and is a success... so not sure what is being tested here? Is this a valid test? Also reading the MSDN the D3DGETDATA_FLUSH is supposed to flush the query so the value its returning may be ok... So If I am understanding the above code the first one should return a S_OK saying that it flushed the query code.... Then the second call should return a S_FALSE because the query has nothing in it..... Thoughts? Explinations??? Inpuut... <G> Chris

3 3

Re: Add .cvsignore entries for .fake files
by Paul Chitescu 23 Nov '09

23 Nov '09

On Monday 16 November 2009 04:11:25 pm Paul Chitescu wrote: > Changelog: > Add .cvsignore entries for .fake files. What's wrong with this? Applies cleanly to my pristine wine-CVS, tried with patch taken from wine-patches bounce. Whoever rejected with "fails to apply" please reply with the output.

4 4

re: winmm: Don't stop parsing after MCI's alias keyword.
by Dan Kegel 23 Nov '09

23 Nov '09

Joerg wrote: > I'm surprised that valgrind did not complain about the bug... Looks like I ignore files that only contain leak errors: http://code.google.com/p/winezeug/source/browse/trunk/valgrind/valgrind-spl… on the theory that we're already overwhelmed dealing with non-leak errors. You can still see the leaks in the full log, http://kegel.com/wine/valgrind/logs/2009-11-19-08.35.log What do people think - should we focus on non-leak errors for a while (in which case I should suppress all leak errors), or should I stop ignoring modules that only have leak errors? Also, mci tests hang on my system and need to be killed, so I may be missing some errors because of that. (Finally, my automated runs are on hold while I add use-after-free detection. I'm lame, and use the same source tree for develoment and for the automated runs. One of these days I should separate them. Or somebody else could do the automated runs...) - Dan

2 1

Re: winspool: Don't use 16Bit gdi.exe function for DeviceCapabilitiesA/W
by Alexandre Julliard 23 Nov '09

23 Nov '09

Detlef Riekenberg <wine.dev(a)web.de> writes: > - if (!GDI_CallDeviceCapabilities16) > - { > - GDI_CallDeviceCapabilities16 = (void*)GetProcAddress( GetModuleHandleA("gdi32"), > - (LPCSTR)104 ); > - if (!GDI_CallDeviceCapabilities16) return -1; > - } > - ret = GDI_CallDeviceCapabilities16(pDevice, pPort, cap, pOutput, lpdm); > - > - /* If DC_PAPERSIZE map POINT16s to POINTs */ > - if(ret != -1 && cap == DC_PAPERSIZE && pOutput) { > - POINT16 *tmp = HeapAlloc( GetProcessHeap(), 0, ret * sizeof(POINT16) ); > - POINT *pt = (POINT *)pOutput; You can't remove the 16-bit conversion if you are still calling the existing driver. Probably a better approach is to first add a DrvDeviceCapabilities to the wineps driver. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: server: Only require REG_OPTION_VOLATILE when creating a new key.
by Paul Vriens 23 Nov '09

23 Nov '09

Hi Alexandre, With this patch the following errors are introduced when starting anything on a clean .wine : err:setupapi:registry_callback could not create key 0x80000002 L"HARDWARE\\DEVICEMAP\\PARALLEL PORTS" err:setupapi:registry_callback could not create key 0x80000002 L"HARDWARE\\DEVICEMAP\\SERIALCOMM" -- Cheers, Paul.

1 0

[RFC] Handle process token groups in server/file.c::sd_to_mode
by Ben Peddell 23 Nov '09

23 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This proposed patch (which I believe will contribute toward solving bugs 17672, 19588 and 20643, and any others where the permissions are set too restrictive) exposes the token_sid_present call in token.c, and uses it to check the SIDs in the security descriptor against those in the process token. Are there any changes anyone can think of before I submit it to wine-patches? Is there a better (already exposed) way of checking a SID against the process token's group list? - ---- server/file.c | 6 ++++-- server/security.h | 1 + server/token.c | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAksBcpAACgkQTHDAI68Nsuny6ACfXu3vvWS6O27Z/mfozb4e/ZMG MYQAoItP8P75a3l54TYrLnQbk7lNyaaQ =7QsU -----END PGP SIGNATURE----- server/file.c | 6 ++++-- server/security.h | 1 + server/token.c | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/server/file.c b/server/file.c index a74de14..793c24a 100644 --- a/server/file.c +++ b/server/file.c @@ -485,7 +485,8 @@ mode_t sd_to_mode( const struct security_descriptor *sd, const SID *owner ) if (access & FILE_EXECUTE) denied_mode |= S_IXUSR|S_IXGRP|S_IXOTH; } - else if (security_equal_sid( sid, owner )) + else if (security_equal_sid( sid, owner ) || + token_sid_present( current->process->token, sid, 1 )) { unsigned int access = generic_file_map_access( ad_ace->Mask ); if (access & FILE_READ_DATA) @@ -509,7 +510,8 @@ mode_t sd_to_mode( const struct security_descriptor *sd, const SID *owner ) if (access & FILE_EXECUTE) new_mode |= S_IXUSR|S_IXGRP|S_IXOTH; } - else if (security_equal_sid( sid, owner )) + else if (security_equal_sid( sid, owner ) || + token_sid_present( current->process->token, sid, 0 )) { unsigned int access = generic_file_map_access( aa_ace->Mask ); if (access & FILE_READ_DATA) diff --git a/server/security.h b/server/security.h index 39b1d2f..33cf5da 100644 --- a/server/security.h +++ b/server/security.h @@ -55,6 +55,7 @@ extern int token_check_privileges( struct token *token, int all_required, extern const ACL *token_get_default_dacl( struct token *token ); extern const SID *token_get_user( struct token *token ); extern const SID *token_get_primary_group( struct token *token ); +extern int token_sid_present( struct token *token, const SID *sid, int deny); static inline const ACE_HEADER *ace_next( const ACE_HEADER *ace ) { diff --git a/server/token.c b/server/token.c index ce896ac..461e79d 100644 --- a/server/token.c +++ b/server/token.c @@ -776,7 +776,7 @@ int token_check_privileges( struct token *token, int all_required, return (enabled_count > 0); } -static int token_sid_present( struct token *token, const SID *sid, int deny ) +int token_sid_present( struct token *token, const SID *sid, int deny ) { struct group *group;

3 7

Firefox not installing with winetricks. Reason: need to upgrade 3.5.3 to 3.5.5.
by Ido Tal 22 Nov '09

22 Nov '09

Hi, I've just now tried to install firefox with winetricks and failed. A short scan reveals what the problem is (I think): the version winetricks is trying to install is 3.5.3. Looking at http://releases.mozilla.org/pub/mozilla.org/firefox/releases/ shows that it's not there anymore. Hope this helps... Ido

3 2

← Newer
1
...
5
6
7
8
9
10
11
...
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel November 2009