wine-devel December 2012

wine-devel@winehq.org

73 participants
137 discussions

Re: wined3d: Recognize Nvidia GTX660 cards.
by Henri Verbeet 14 Dec '12

14 Dec '12

On 14 December 2012 17:01, Caron Jensen <caron(a)codeweavers.com> wrote: > @@ -2018,6 +2020,7 @@ static enum wined3d_pci_device select_card_nvidia_mesa(const struct wined3d_gl_i > { > /* Kepler */ > {"NVE4", CARD_NVIDIA_GEFORCE_GTX680}, > + {"NVE7", CARD_NVIDIA_GEFORCE_GTX660}, > /* Fermi */ > {"NVCF", CARD_NVIDIA_GEFORCE_GTX550}, > {"NVCE", CARD_NVIDIA_GEFORCE_GTX560}, That's ok in principle, but please keep the table ordered, so NVE7 above NVE4.

1 0

Re: oleaut32: Added a test for prop getter invocation with different flags
by Marvin 14 Dec '12

14 Dec '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=23397 Your paranoid android. === WINEBUILD (build) === Make failed

3 3

Use software vertex processing instead of mixed?
by Francois Gouget 14 Dec '12

14 Dec '12

A lot of tests get skipped on my Windows XP EeePC just because the Direct3D 9 device creation fails. And apparently that's just because we ask for mixed vertex processing instead of software vertex processing. How important is it to use mixed mode instead of software, at least for these tests? It does not seem to make any difference to the test results on my HD4000 graphics card (that one is on Windows 8 and accepts both mixed and software vertex processing unlike the GMA950). diff --git a/dlls/d3dx9_36/tests/core.c b/dlls/d3dx9_36/tests/core.c index ba0f065..e25a5d3 100644 --- a/dlls/d3dx9_36/tests/core.c +++ b/dlls/d3dx9_36/tests/core.c @@ -1240,7 +1240,7 @@ START_TEST(core) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if(FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); IDirect3D9_Release(d3d); diff --git a/dlls/d3dx9_36/tests/effect.c b/dlls/d3dx9_36/tests/effect.c index 8e12b74..7f238be 100644 --- a/dlls/d3dx9_36/tests/effect.c +++ b/dlls/d3dx9_36/tests/effect.c @@ -2686,7 +2686,7 @@ START_TEST(effect) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); IDirect3D9_Release(d3d); diff --git a/dlls/d3dx9_36/tests/line.c b/dlls/d3dx9_36/tests/line.c index b9eacee..89e4fc6 100644 --- a/dlls/d3dx9_36/tests/line.c +++ b/dlls/d3dx9_36/tests/line.c @@ -138,7 +138,7 @@ START_TEST(line) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); IDirect3D9_Release(d3d); diff --git a/dlls/d3dx9_36/tests/mesh.c b/dlls/d3dx9_36/tests/mesh.c index 35e38e4..0218000 100644 --- a/dlls/d3dx9_36/tests/mesh.c +++ b/dlls/d3dx9_36/tests/mesh.c @@ -129,7 +129,7 @@ static struct test_context *new_test_context(void) d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hwnd, - D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Couldn't create IDirect3DDevice9 object %#x\n", hr); @@ -1183,7 +1183,7 @@ static void D3DXCreateMeshTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -1390,7 +1390,7 @@ static void D3DXCreateMeshFVFTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -2263,7 +2263,7 @@ static void D3DXLoadMeshTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -2462,7 +2462,7 @@ static void D3DXCreateBoxTest(void) memset(&d3dpp, 0, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -2760,7 +2760,7 @@ static void D3DXCreateSphereTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -3004,7 +3004,7 @@ static void D3DXCreateCylinderTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -4004,7 +4004,7 @@ static void D3DXCreateTextTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); @@ -4298,7 +4298,7 @@ static void D3DXGenerateAdjacencyTest(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); diff --git a/dlls/d3dx9_36/tests/shader.c b/dlls/d3dx9_36/tests/shader.c index 75139b1..223bebf 100644 --- a/dlls/d3dx9_36/tests/shader.c +++ b/dlls/d3dx9_36/tests/shader.c @@ -1370,7 +1370,7 @@ static void test_setting_constants(void) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); diff --git a/dlls/d3dx9_36/tests/surface.c b/dlls/d3dx9_36/tests/surface.c index 84a70cf..7ae7df9 100644 --- a/dlls/d3dx9_36/tests/surface.c +++ b/dlls/d3dx9_36/tests/surface.c @@ -1230,7 +1230,7 @@ START_TEST(surface) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if(FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); IDirect3D9_Release(d3d); diff --git a/dlls/d3dx9_36/tests/texture.c b/dlls/d3dx9_36/tests/texture.c index 2b17f64..9972571 100644 --- a/dlls/d3dx9_36/tests/texture.c +++ b/dlls/d3dx9_36/tests/texture.c @@ -1803,7 +1803,7 @@ START_TEST(texture) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if (FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); IDirect3D9_Release(d3d); diff --git a/dlls/d3dx9_36/tests/volume.c b/dlls/d3dx9_36/tests/volume.c index 35cd509..f3976c0 100644 --- a/dlls/d3dx9_36/tests/volume.c +++ b/dlls/d3dx9_36/tests/volume.c @@ -284,7 +284,7 @@ START_TEST(volume) ZeroMemory(&d3dpp, sizeof(d3dpp)); d3dpp.Windowed = TRUE; d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD; - hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_MIXED_VERTEXPROCESSING, &d3dpp, &device); + hr = IDirect3D9_CreateDevice(d3d, D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, wnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &device); if(FAILED(hr)) { skip("Failed to create IDirect3DDevice9 object %#x\n", hr); -- 1.7.10.4

2 3

FindFirstVolume crash
by Michael Ost 14 Dec '12

14 Dec '12

Hi list, Can someone help me get through the wineserver code for passing data through a buffer in response to an ioctl? Our (slightly out of date 1.3.24 version of) Wine is getting INVALID_HANDLE_VALUE returned for FindFirstVolume. The problem is that the FindNextVolume call inside FindFirstVolume fails because it is told there are no mount points. I have tracked the code through FindFirstVolume through NtDeviceIoControlFile to server_ioctl_file on the app side. On the wineserver side I can see the wineserver fielding the ioctl request, and mountmgr.sys filling a buffer with 5 mount points. But this information is being written into a buffer (address 0x12510) by the wineserver that is not making it back to FindNextVolume buffer (address 0x29820) on the app side. Where do these buffers come from? Do they use shared memory? Or is the info passed through a pipe? I'm having trouble making my way through the wineserver code, so any tips or pointers would be appreciated! Thank you, Michael Ost Muse Research, Inc.

2 1

Re: ole32: fix compilation with mingw32-gcc >= 4.6.0
by Marvin 14 Dec '12

14 Dec '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=23392 Your paranoid android. === WINEBUILD (build) === Patch failed to apply

1 0

Re: [PATCH] msxml3: skip a possible BOM in doparse
by Nikolay Sivov 14 Dec '12

14 Dec '12

Actually libxml2 is supposed to take care of that. Relevant code from xmlSwitchInputEncodingInt() : --- /* * Specific handling of the Byte Order Mark for * UTF-16 */ if ((handler->name != NULL) && (!strcmp(handler->name, "UTF-16LE") || !strcmp(handler->name, "UTF-16")) && (input->cur[0] == 0xFF) && (input->cur[1] == 0xFE)) { input->cur += 2; } if ((handler->name != NULL) && (!strcmp(handler->name, "UTF-16BE")) && (input->cur[0] == 0xFE) && (input->cur[1] == 0xFF)) { input->cur += 2; } --- So we need to figure out what's broken and where before skipping it on our side. On Fri, Dec 14, 2012 at 1:34 AM, Marcus Meissner <marcus(a)jet.franken.de>wrote: > Hi, > > Issue encountered in Corel X4 installer. (see bug 11747), > it gets a UTF16 document with BOM in front. > > trace:msxml:domdoc_load (0x131d10)->({VT_BSTR: > L"C:\\users\\marcus\\Temp\\{180A87F9-82B9-42A6-8F0E-3AC30A58AC8C}\\{5A51C731-A877-4C6E-8D51-CD16CDC46C9B}\\CorelDRAW > Graphics Suite X4 Setup Files\\Setup.xml"}) > trace:msxml:create_moniker_from_url > L"C:\\users\\marcus\\Temp\\{180A87F9-82B9-42A6-8F0E-3AC30A58AC8C}\\{5A51C731-A877-4C6E-8D51-CD16CDC46C9B}\\CorelDRAW > Graphics Suite X4 Setup Files\\Setup.xml" > trace:msxml:bind_url 0x131570 > trace:msxml:bsc_AddRef (0x138da0) ref=2 > trace:msxml:bsc_QueryInterface interface > {6d5140c1-7436-11ce-8034-00aa006009fa} not implemented > trace:msxml:bsc_QueryInterface interface > {aaa74ef9-8ee7-4659-88d9-f8c504da73cc} not implemented > trace:msxml:bsc_OnStartBinding (0x138da0)->(ff 0x13a238) > trace:msxml:bsc_QueryInterface interface > {79eac9e4-baf9-11ce-8c82-00aa004ba90b} not implemented > trace:msxml:bsc_OnDataAvailable (0x138da0)->(5 36572 0x33e908 0x33e8fc) > trace:msxml:bsc_OnStopBinding (0x138da0)->(00000000 (null)) > fixme:msxml:doparse start of xml is ffffffff fffffffe 3c 00 49 00 43 > > Bug is only fixed partially by this. > > Ciao, Marcus > --- > dlls/msxml3/domdoc.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/dlls/msxml3/domdoc.c b/dlls/msxml3/domdoc.c > index 49e6168..3504204 100644 > --- a/dlls/msxml3/domdoc.c > +++ b/dlls/msxml3/domdoc.c > @@ -486,6 +486,16 @@ static xmlDocPtr doparse(domdoc* This, char const* > ptr, int len, xmlCharEncoding > sax_serror /* serror */ > }; > > + /* UTF-16 BOM at start of data */ > + if ((len > 2) && (ptr[0] == (char)0xff) && (ptr[1] == (char)0xfe)) { > + ptr += 2; > + len -= 2; > + if (encoding == XML_CHAR_ENCODING_NONE) > + encoding = XML_CHAR_ENCODING_UTF16LE; > + else > + FIXME("Not changing xml encoding type from %d to > XML_CHAR_ENCODING_UTF16LE.\n", encoding); > + } > + > pctx = xmlCreateMemoryParserCtxt(ptr, len); > if (!pctx) > { > -- > 1.7.10.4 > > > >

1 0

Re: msvcrt: implement _ftol in msvcrt instead of forwarding to ntdll (1/2)
by Alexandre Julliard 13 Dec '12

13 Dec '12

Austin English <austinenglish(a)gmail.com> writes: > On Wed, Dec 12, 2012 at 5:57 PM, Austin English <austinenglish(a)gmail.com> wrote: >> From the keeping Focht happy team >> >> This patch series fixes http://bugs.winehq.org/show_bug.cgi?id=13401 >> >> -- >> -Austin > > Only export the symbol on 32-bit. This should be properly integrated with the rest of the math functions. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/7] advapi32: Support service objects in GetSecurityInfo (try 4).
by Alexandre Julliard 13 Dec '12

13 Dec '12

"Erich E. Hoover" <ehoover(a)mymail.mines.edu> writes: > + /* Test using GetSecurityInfo to obtain security information */ > + SetLastError(0xdeadbeef); > + retval = pGetSecurityInfo(svc_handle, SE_SERVICE, DACL_SECURITY_INFORMATION, &sidOwner, > + &sidGroup, &dacl, &sacl, &pSD); > + error = GetLastError(); > + LocalFree(pSD); > + ok(retval == ERROR_SUCCESS, "Expected GetSecurityInfo to succeed: result %d\n", retval); > + todo_wine ok(error == ERROR_INSUFFICIENT_BUFFER || broken(error == ERROR_SUCCESS) /* W2K3 */ > + || broken(error == ERROR_IO_PENDING) /* W2K */ || broken(error == ERROR_NONE_MAPPED) /* NT4 */, > + "Expected ERROR_INSUFFICIENT_BUFFER, got %d\n", error); Testing last error on success is not useful. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/5] [WineHelp]: added basic infrastructure for a new wineconsole mode: line
by Alexandre Julliard 13 Dec '12

13 Dec '12

Eric Pouech <eric.pouech(a)orange.fr> writes: > +/****************************************************************** > + * WCLINE_SetTitle > + * > + * Sets the title to the wine console > + */ > +static void WCLINE_SetTitle(const struct inner_data* data) > +{ > + WCHAR wbuf[256]; > + > + if (WINECON_GetConsoleTitle(data->hConIn, wbuf, sizeof(wbuf)/sizeof(WCHAR))) > + { > + char buffer[256]; > + > + WideCharToMultiByte(CP_UNIXCP, 0, wbuf, -1, buffer, sizeof(buffer), > + NULL, NULL); > + fputs("\033]2;", stdout); > + fputs(buffer, stdout); > + fputc('\a', stdout); > + fflush(stdout); > + } > +} I don't think you want to do that. You would need at least to check the terminal type, and make sure that stdout is actually going to the terminal. I'm not sure it's worth the trouble. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: msvcrt: implement _ftol in msvcrt instead of forwarding to ntdll (1/2)
by Piotr Caban 13 Dec '12

13 Dec '12

On 12/13/12 02:57, Austin English wrote: + * Based on MSVCRT__ftol in dlls/ntdll/misc.c + */ +#if defined(__GNUC__) && defined(__i386__) +LONGLONG CDECL MSVCRT__ftol(void) +{ +@ cdecl -ret64 _ftol() MSVCRT__ftol +@ cdecl -ret64 _ftol2() MSVCRT__ftol This will not work on 64-bit build or when __GNUC__ is not defined. I don't see _ftol function in native 64-bit msvcrt, maybe it should not be exported there.

2 1

← Newer
1
...
6
7
8
9
10
11
12
13
14
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel December 2012