March 2012 - wine-devel

Re: strmbase: add beginnings of BaseWindow
by Alexandre Julliard 28 Mar '12

28 Mar '12

Aric Stewart <aric(a)codeweavers.com> writes: > +HRESULT WINAPI BaseWindow_Destroy(BaseWindow *This) > +{ > + if (This->hWnd) > + BaseWindowImpl_DoneWithWindow(This); > + > + UnregisterClassW(This->pClassName, NULL); You most likely don't want to unregister the class every time. > + wnd_class_registered = GetClassInfoW(This->hInstance, This->pClassName, > + &winclass); > + > + if (!wnd_class_registered) > + { There shouldn't be any reason to do this. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/5] winex11: Use GLX_DONT_CARE instead of ~0 in ConvertAttribWGLtoGLX().
by Chris Robinson 28 Mar '12

28 Mar '12

On Tuesday, March 27, 2012 8:35:49 PM Henri Verbeet wrote: > - int pixelattrib = ~0; > + int pixelattrib = GLX_DONT_CARE; I want to say there's a reason we used ~0 instead of GLX_DONT_CARE, but it's been too long that I can't remember. I think it was because GLX_DONT_CARE didn't include all possibilities that ~0 would, like what WGL wanted.

2 1

Re: [4/4] scrrun: Add scrrun tests (try 2)
by Marvin 28 Mar '12

28 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17522 Your paranoid android. === WINEBUILD (build) === Make failed

1 0

Re: [PATCH] devenum: Add tests for devenum. (try 2)
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17512 Your paranoid android. === WINEBUILD (build) === Make failed

1 0

Re: [PATCH] devenum: Add tests for devenum.
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17507 Your paranoid android. === WNT4WSSP6 (32 bit devenum) === devenum.c:59: Test failed: Cannot create CLSID_SystemDeviceEnum object (res = 80040154)

1 0

Re: [PATCH 1/2] winmm: Support DRVM_MAPPER_PREFERRED_GET in waveXxxMessage
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17495 Your paranoid android. === WNT4WSSP6 (32 bit capture) === capture.c:648: Test failed: waveInMessage(DRVM_MAPPER_PREFERRED_GET) failed: 6 capture.c:653: Test failed: Got invalid preferred device: 0x22fe5c === W2KPROSP4 (32 bit capture) === capture.c:648: Test failed: waveInMessage(DRVM_MAPPER_PREFERRED_GET) failed: 6 capture.c:653: Test failed: Got invalid preferred device: 0x235370 === WNT4WSSP6 (32 bit wave) === wave.c:1386: Test failed: waveOutMessage(DRVM_MAPPER_PREFERRED_GET) failed: 6 wave.c:1391: Test failed: Got invalid preferred device: 0x234098 === W2KPROSP4 (32 bit wave) === wave.c:1386: Test failed: waveOutMessage(DRVM_MAPPER_PREFERRED_GET) failed: 6 wave.c:1391: Test failed: Got invalid preferred device: 0x41

1 0

Re: winex11.drv: Do not trash existing clip rectangle if XInput2 is not available.
by Alexandre Julliard 27 Mar '12

27 Mar '12

Dmitry Timoshkov <dmitry(a)baikal.ru> writes: > This patch makes dlls/user32/input.c and dlls/user32/monitor.c tests pass > on a system without XInput2. It will break dinput, we rely on the clip rectangle being reset. -- Alexandre Julliard julliard(a)winehq.org

3 12

[PATCH] mciqtz: Actually assign result to the output structure
by Joerg-Cyril.Hoehle＠t-systems.com 27 Mar '12

27 Mar '12

Andrew, Aric, Maarten, I'm pleased to see that patches to quartz and mciqtz keep flowing in. For the last years, I've wondered whether I should open a sort of generic bug that mciqtz/quartz still is a mostly broken MCI device, missing many basic functions. Every time I try it out using my MCI shell, it has improved a little bit, but it's still in a very bad shape overall. Alas, I've never written a significant mciavi testsuite. That could be used to check mciqtz too. For instance, basic commands like the following are either partially implemented or completely missing: open xyz.avi type mpegvideo alias q notify status q length status q time format notify seek q to 0 set q time format xyz play q from 50 to 500 notify status q position window q state show seek q to end Furthermore, mciqtz should be able to access other files, e.g. play .wav and even IIRC .mid files. open sound.wav type mpegvideo alias w notify status w time format play w from 4 status w length status w position In theory, one could use the mciwave testsuite, add type mpegvideo to every open, and it should mostly pass. Even without "type mpegvideo", using mciqtz to open an .mpg file with audio and/or video yields many fixme lines and has issues, e.g. IIRC it doesn't manage to stop! close all Often, the missing bits are in quartz or associated dlls, not mciqtz. Every time I look at quartz code, I'm lost among lots of methods that do nothing but delegate to other methods. Typical OO :-( A quartz working well would allow to close bug #19496. See comment #13. I believe msvfw should always delegate to one of mciavi or mciqtz. But currently, mciqtz+quartz is in too bad shape to switch msvfw. I'd be happy to see mciqtz work at least as well as most other mci drivers. Please keep sending patches! Thank you, Jörg Höhle

2 3

Need suggestion to choose a GSoC idea
by Qian Hong 27 Mar '12

27 Mar '12

Hi all, I'm a student in Department of Mathematics, Sun Yat-sen University. My irc nick name is fracting, my real name is Qian Hong. I'm in GMT+8 time zone, availible on 10:00 to 18:00 (GMT+8) on #winehackers. I know C/bash and some Linux skills. Currently I'm an intern in Redhat, working in the kernel-qe group. I have great interesting in the Wine project. Last year I spent most of my spare time on reporting bugs to Wine. When I doing this I found lots of bugs regarding Chinese software have beem complained in local Linux forum for years but no one reported them to Wine project. In other words, I found most Chinese Linux users didn't report bugs to open source projects, well, I think that is a bug too :) After reported 100+ bugs, I'm surprised so many bugs have been fixed in just one year. I wish I can do some more then reporting bugs for Wine project, great if I can get start with the 2012 GSoC and keep submitting patches to Wine after that. I have lots of ideas in my TODO list, unfortunately most of them might too hard to do as a GSoC project. Anyway, I'll post my ideas here, wait for feedbacks, choose one of them as my GSoC idea, and leave others as my job in the coming years. Certainly I'm glad to see any others working on those ideas :) Here is my list: - Implement ndis.sys This idea come from the off-standard network authentication in China. Lots of Universities in China using some off-standard network authentication methods for campus network connection, the authentication protocols are usually private and changed frequently, the authentication clients are usually Windows-only. This issue is the main blocker for students in those Universities to change to Linux desktop or Mac. I've filed some bugs regarding some network authentication clients, such as [1],[2],[3],[4],[5]. However, even the above bugs are fixed, these clients might not work on wine because they depends on ndis.sys which is not implemented yet. As an intern in Redhat network-qe group focus on NIC testing, I have great interesting in implement ndis.sys, though I think it is too hard for a GSoC project. The ndiswrapper code is a great resource but not complete, also I known ReactOS project has a ndis.sys too but obviously it won't work on Wine. Is it allowed to read ReactOS implementation to learn how things work? Anyway I'm interesting in what you think :) - Implement/improve wpcap proxy This idea is similar with the first one, in fact André H has already done the most important part [6],[7]. I hope André's patch will be accepted, and I'm interesting in improving it. I have done some proof-of-concept to show that some kinds of network auth client wich depends on winpcap will work on wine with André's patch. - Improve builtin iexplore This idea is come from another main blocker for using Linux/Mac in China. Most Chinese online banks are ie-only, depends on ActiveX and some ie-only style JavaScript or even VBScript. Jacek and other wine developers has done lots of work on them, and I'm interesting in participating. I've filed 40+ bugs regarding online bank support with Wine [8]. My goal is to make wine builtin iexplore works for as many online banks, currently I have more then 6 different online bank accounts for testing, guys in openbank-discuss group [9] will help on testing too. - Improve USB support Yeah, this might be another idea which is too hard for a GSoC project. We already have a third party patch, I wonder will Wine-1.6 have official USB support? This idea is similar with the above one, my goal is to solve the online bank USB-key issues. After testing on 8 different USB-keys with the USB patch [10], I noticed they won't work on wine without hidusb.sys. ReactOS project has implement hidusb.sys in the last few months, again, is it allow to learn ReactOS code if I would like to contribute to Wine? - Improve Wine CJK font support The main idea is fix Bug 16325 [11], Aric and others have done a lot of work on it, and I'm glad to participating too. I think the main blocker for Wine CJK font support is Font Association now, is it suitable for a GSoC project? Also I've filed some other Wine font bugs [12],[13],[14],[15],[16], I'm happy to working on them. - Improve Wine font test case This idea is similar with the above one, however, instead of fixing real bugs, this idea is to prevent new bugs(regression). As having filed 100+ bugs I know the pain of doing regression test if we can't script the test, this happens on font related bugs. The main idea is to integrate an OCR engine to wine testcase, use ORC method to detect whether the fonts display correctly. We already have very good open source ORC engine [17] which is in Apache License. However tesseract-ocr is written in C++ an I am worring that will not be integrated to Wine code tree. - Improve Wine App install / App running testing This idea is similar with Austin's early work [18], my idea is using sikuli [19] instead of autohotkey, since sikuli is more powerful for complex work. Sikuli using tesseract as orc engine, so if we done this job we can prevent many font relate regression as well. - I'm also open to other ideas... I'm sorry for my long post, and thank you for your time to read it. In fact I have much more things on my todo list regarding to Wine, but time is limit and I have to give up most of them in the near future. I'm happy to know whether there is anyone working on these ideas, also I'm happy if any others take them as GSoC project :) Rather than to be accepted by GSoC, I'm more glad to see Wine is improved, especially on parts I've mentioned above, that is why I post this long mail. Wish we can see them in Wine 1.6. Of cause, GSoC is awesome to me :) Any suggestion is appreciated, and feel free to ping me on IRC (fracting). Last but not least, thanks wine community for such a great project. Reference: [1] Bug 29460 - Ruijie Supplicant Su1xDriver.sys crashes in driver entry due to ntoskrnl.exe IoGetCurrentProcess() being a stub [2] Bug 27060 - installation of iNodeSetup3.60-6208.exe needs netcfgx.dll [3] Bug 27061 - iNode Client exit silently on start up [4] Bug 30041 - npptools.dll is needed by ishare_user.exe of Dr.com [5] Bug 30208 - NKSetup (Shan Xun 802.1x client) infinite loop while installing [6] Bug 21571 - WinPcap 4.0.1: Setup cannot install Microsoft Network Monitor Driver (NetMon) [7] http://www.winehq.org/pipermail/wine-patches/2011-March/099838.html [8] http://code.google.com/p/online-banking-with-wine/wiki/buglist [9] https://groups.google.com/forum/?fromgroups#!forum/non-ie-online-banking [10] http://wiki.winehq.org/USB [11] Bug 16325 - incorrect font rendering for CJK programs [12] Bug 29851 - Some part of PDFCreator installer cannot display Chinese correctly even Font Replacement is setting correctly [13] Bug 29853 - QQ2011 does not display Chinese correctly with builtin usp10 if font link setting is incomplete [14] Bug 29850 - Scilab does not display Chinese [15] Bug 27285 - Miro does not display Chinese [16] Bug 30263 - builtin iexplore does not display Chinese [17] http://code.google.com/p/tesseract-ocr/ [18] http://wiki.winehq.org/Appinstall [19] http://sikuli.org/ -- Regards, Qian Hong - Sent from Ubuntu http://www.ubuntu.com/

3 4

Re: [3/8] scrrun: Add IFileSystem3 support
by Jacek Caban 27 Mar '12

27 Mar '12

Hi Alistair, On 03/27/12 11:41, Alistair Leslie-Hughes wrote: > +typedef struct FileSystem > +{ > + IFileSystem3 IFileSystem3_iface; > + LONG ref; > +} FileSystem; > + > +static inline FileSystem *impl_from_IFileSystem3( IFileSystem3 *iface ) > +{ > + return CONTAINING_RECORD(iface, FileSystem, IFileSystem3_iface); > +} Is there any reason for this to be heap-based object? It looks to me like it would better be a static object (AFAICS you don't even need FileSystem struct since you're not going to store anything in it). Cheers, Jacek

2 1

Re: [5/8] scrrun: Implement IFileSystem3 FileExists
by Jacek Caban 27 Mar '12

27 Mar '12

Hi Alistair, On 03/27/12 11:42, Alistair Leslie-Hughes wrote: > + static const WCHAR existing_fileW[] = { > + 'c', ':', '\\', 'W', 'i', 'n', 'd', 'o', 'w', 's', '\\', 's', 'y', 's', 't', 'e', 'm', '3', > + '2', '\\', 'n', 't', 'd', 'l', 'l', '.', 'd', 'l', 'l', 0}; Hardcoding even such paths is not a god idea. Cheers, Jacek

1 0

Re: [6/8] scrrun: Implement IFileSystem3 FolderExists
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17493 Your paranoid android. === WINEBUILD (build) === Make failed

1 0

Re: [5/8] scrrun: Implement IFileSystem3 FileExists
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17492 Your paranoid android. === WINEBUILD (build) === Make failed

1 0

Re: [4/8] scrrun: Add scrrun tests
by Marvin 27 Mar '12

27 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17491 Your paranoid android. === WINEBUILD (build) === Make failed

1 0

Re: [PATCH] cmd/tests: If we rewind to the beginning of the line, don't increment line number.
by Frédéric Delanoy 27 Mar '12

27 Mar '12

On Mon, Mar 26, 2012 at 10:13, Christian Costa <titan.costa(a)gmail.com> wrote: > If some particular cases, a bias is introduced in the line number which make error message > mismatch the content of the .exp file. This patch fixes that. > --- > programs/cmd/tests/batch.c | 4 ++++ I guess this should be marked as a prerequisite to/included in your new attrib patches list Frédéric

2 1

GSoC proposal
by Cheer Xiao 27 Mar '12

27 Mar '12

Hi all, I opened bug 30255 [1](which, unfortunately, was just marked duplicate as bug 19263 [2]), which I believe is a long-standing issue. Simply put, uxthemes has some performance problems, and consequently UI rendering with theming enabled would lag a lot. Since I'm also planning for GSoC, I would like make that my GSoC proposal and fix the bug myself. Also, there are failing tests regarding dlls/uxtheme - running dlls/uxtheme/tests/uxtheme_test.exe.so gives 11 failures out of a total of 56 executed tests. I can try to fix that too. With all of these, this may still be a trivial proposal. To make it less trivial :), I would also like to work on the gtk+ theming bridge [3], once the performance issue is fixed. I also have another alternative proposal, i.e. to implement full IME support so that Windows IMEs can be used on Linux. That would consists of basically two parts - the Win32 API (which, after a brief inspection, seems to be at least partly implemented) to handle the Windows part and a daemon to handle the Linux part (half like win32's ctfmon.exe and half like ibus-daemon). But I haven't investigated much into that yet, so I don't have much to say. Still, your suggestions are very welcome. And a few words about myself: I have been one of the primary maintainers of simplified Chinese translation of Wine during the past few years - so I have already got my name into AUTHORS ;-). I know quite some C - read K&R thoroughly, plus experience in a few small projects; I also know the Git workflow well. I'd love to help fix bug 10000 so that Unix can take over the world ;-). Your suggestions and ideas are very welcome. 1. http://bugs.winehq.org/show_bug.cgi?id=30255 2. http://bugs.winehq.org/show_bug.cgi?id=19263 3. http://wiki.winehq.org/ThemingSupport -- Regards, Cheer Xiao aka. xiaq

8 15

Fwd: Student Proposals Now Being Accepted for Google Summer of Code
by Maarten Lankhorst 26 Mar '12

26 Mar '12

I'm still missing some people who haven't signed up as mentor yet. To all students, I hope you discussed your ideas on the mailing list and/or irc, good luck submitting your proposal! :D -------- Originele bericht -------- Onderwerp: Student Proposals Now Being Accepted for Google Summer of Code Datum: Mon, 26 Mar 2012 15:27:05 -0700 Van: Carol Smith <carols(a)google.com> Antwoord-naar: google-summer-of-code-announce+owners(a)googlegroups.com Aan: Google Summer of Code Announce <google-summer-of-code-announce(a)googlegroups.com> Hi there, We are pleased to announce that we are now accepting applications from students to participate in Google Summer of Code 2012. Please check out the FAQs [1], timeline [2], and student manual [3] if you are unfamiliar with the process. The deadline to apply is April 6, 2012 at 19:00 UTC [4]. Late proposals will not be accepted for any reason. [1] - http://www.google-melange.com/gsoc/document/show/gsoc_program/google/gsoc20… [2] - http://www.google-melange.com/gsoc/events/google/gsoc2012 [3] - http://www.booki.cc/gsocstudentguide/ [4] - http://goo.gl/xiKC2

1 0

[GSoC] participate and contribute in opensource community
by Narendra Kishan 26 Mar '12

26 Mar '12

Sir, I am Naren Krishna, I am students of CSE, I have some background in c++ and I have been using wine to run *.exe files in ubuntu. I want to help improve this software as this is a very good software, what do you expect from one. Please guide me, tell me if you want some bugs to be fixed. sincerely, Naren Krishna

1 0

My GSoC 2012 proposal
by Lucas Zawacki 26 Mar '12

26 Mar '12

Hello all, First of all, I'll introduce myself: I'm Lucas Fialho Zawacki a Computer Science undergrad at UFRGS university in Brazil. I have worked with Wine in GSoC 2011 (http://www.google-melange.com/gsoc/project/google/gsoc2011/lfzawacki/8001) and pretty much enjoyed the experience. I'd like to work again with Wine for this year's GSoC and with this email discuss some possible projects. *Joystick Configuration Tool* This seems like a natural project for me to work since I'm very familiar with DirectInput and have access to some josysticks, including force feedback. I'm not sure about what "Support system joystick calibration" is though. Is it related to bug 24235 ? *Scons Wine* I think this could turn out to be very worthwhile project, but there's little documentation about it. To make Scons aware of Winelib would it be enough to create an environment that uses the winelib compilers, libs and includes? Then it would be a question of programatically generating the build script, much like winemaker does for the makefile. I've also been looking at Winemaker and trying to convert some visual studio projects from random google code repositories with moderate success. As a part of this project I could test it with numerous samples, e.g Nehe tutorials (http://nehe.gamedev.net/), and with assorted open source projects targeting windows, and make these just work with Winemaker. *Winetricks* Other ideas fall in winetricks territory so I don't know if they constitute a valid Wine GSoC project, but they're: * Regression Testing GUI. Help a user download the repository, compile wine and run assisted or automated bisections. * Compatibility and exchange of installation recipes with other frontends like PlayOnLinux * Winetricks and AppDB integration. A way to mirror in AppDB the dependencies and workarounds employed by winetricks recipes. I wait for feedback. I'm also available at IRC if someone wants to discuss this in more depth.

4 6

Regarding Gsoc 2012
by prateek papriwal 26 Mar '12

26 Mar '12

I am Prateek Papriwal, a second year undergraduate student persuing Bachelors in Technology in the Indian Institute of Technology Delhi, in the department of Electrical Engineering. I love programming in C . I was told about GSOC 2012 by one of my seniors, who saw passion for coding in me. I traversed through the previous year list of organisations and thereby Wine caught my attention , through which we can install and run windows appplication in other operating systems as we do in our windows . For the last few weeks i have been going through the working of Wine and have gone through some of its modules.i am also using wine for running uTorrent application. I have done a course CSL 101 "Programming in C" in which i have several algorithms using C . I have gone through the ideas page and found "System Management - WMI support" very interesting . Relevant Courses taken: CSL 201 : Data Structures And Algorithms -- Object Oriented Programming, Trees Implementation , Sorting Techniques , Graph Theory ... *Involvement in Open Source Organisation* CMU Sphinx(SVN Repository) RAXA JSS EMR(Git Repository) -- https://raxaemr.atlassian.net/wiki/display/RAXAJSS/Voice+Module+Project Sympy (GIT Repository)

1 0

Spelling errors in en_US translation
by Julian Rüger 26 Mar '12

26 Mar '12

Hi Francois, (and everybody else ;) are there any plans to create an ignore-list for these: http://fgouget.free.fr/wine-po/en_US.spell.html to be able to distinguish real typos from false positives? Most reported errors are false positives (like "codec" or "checksum") but there are real errors, or at least instances of uncommon spelling (like "customising", which is British English afaik, or "Cancelled") which should be fixed (after 1.4), imho. Best regards, Julian

2 3

Re: [PATCH 1/2] shell32: Prepare ASSOC_GetValue and ASSOC_ReturnData to work on non WCHAR* data
by Alexandre Julliard 26 Mar '12

26 Mar '12

Piotr Caban <piotr(a)codeweavers.com> writes: > --- > dlls/shell32/assoc.c | 49 > +++++++++++++++++++++++++------------------------ > 1 files changed, 25 insertions(+), 24 deletions(-) It doesn't work here: ../../../tools/runtest -q -P wine -M shlwapi.dll -T ../../.. -p shlwapi_test.exe.so assoc.c && touch assoc.ok assoc.c:131: Test failed: Expected 72, got 36 assoc.c:160: Test failed: Expected 24, got 12 make: *** [assoc.ok] Error 2 -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: d3d10core: Standardize COM aggregation for d3d10_device.
by Henri Verbeet 26 Mar '12

26 Mar '12

On 22 March 2012 00:50, Michael Stefaniuc <mstefani(a)redhat.de> wrote: > -static HRESULT STDMETHODCALLTYPE d3d10_device_inner_QueryInterface(IUnknown *iface, REFIID riid, void **object) > +static HRESULT STDMETHODCALLTYPE d3d10_device_inner_QueryInterface(IUnknown *iface, REFIID riid, > + void **ppv) > { > - struct d3d10_device *This = d3d10_device_from_inner_unknown(iface); > + struct d3d10_device *This = impl_from_IUnknown(iface); > > - TRACE("iface %p, riid %s, object %p\n", iface, debugstr_guid(riid), object); > + TRACE("iface %p, riid %s, object %p\n", iface, debugstr_guid(riid), ppv); > > - if (IsEqualGUID(riid, &IID_IUnknown) > - || IsEqualGUID(riid, &IID_ID3D10Device)) > + if (IsEqualGUID(riid, &IID_IUnknown) || IsEqualGUID(riid, &IID_ID3D10Device)) > + *ppv = This; > + else if (IsEqualGUID(riid, &IID_IWineDXGIDeviceParent)) > + *ppv = &This->IWineDXGIDeviceParent_iface; > + else > { > - ID3D10Device_AddRef(&This->ID3D10Device_iface); > - *object = This; > - return S_OK; > + WARN("%s not implemented, returning E_NOINTERFACE\n", debugstr_guid(riid)); > + *ppv = NULL; > + return E_NOINTERFACE; > } > > - if (IsEqualGUID(riid, &IID_IWineDXGIDeviceParent)) > - { > - IWineDXGIDeviceParent_AddRef(&This->IWineDXGIDeviceParent_iface); > - *object = &This->IWineDXGIDeviceParent_iface; > - return S_OK; > - } > - > - WARN("%s not implemented, returning E_NOINTERFACE\n", debugstr_guid(riid)); > - > - *object = NULL; > - return E_NOINTERFACE; > + IUnknown_AddRef((IUnknown*)*ppv); > + return S_OK; > } I'm not sure this really makes it much better, but I guess it's mostly up to how Alexandre wants these.

2 1

Re: msi: Implement MSIMODIFY_MERGE function in TABLE_modify.
by Marvin 26 Mar '12

26 Mar '12

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=17479 Your paranoid android. === WNT4WSSP6 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W2KPROSP4 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === WXPPROSP3 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W2K3R2SESP2 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === WVISTAADM (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W2K8SE (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W7PRO (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W7PROX64 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === TEST64_W7SP1 (32 bit db) === db.c:1079: Test failed: MsiViewModify failed === W7PROX64 (64 bit db) === db.c:1079: Test failed: MsiViewModify failed === TEST64_W7SP1 (64 bit db) === db.c:1079: Test failed: MsiViewModify failed

2 1

Re: [PATCH] implement MSIMODIFY_MERGE function in TABLE_modify
by Hans Leidekker 26 Mar '12

26 Mar '12

On Mon, 2012-03-26 at 11:14 +0200, Andoni Morales wrote: > - case MSIMODIFY_REPLACE: > case MSIMODIFY_MERGE: > + /* check for a duplicated key */ > + r = msi_table_find_row( tv, rec, &row, column ); > + if (r == ERROR_SUCCESS) { > + /* check that both are identical */ > + r = compare_record (tv, row, rec); > + if (r != ERROR_SUCCESS) > + break; > + } else { > + r = table_validate_new( tv, rec, NULL ); > + if (r != ERROR_SUCCESS) > + break; > + r = TABLE_insert_row( view, rec, -1, FALSE ); > + break; > + } > + > + case MSIMODIFY_REPLACE: Please use bracketing and indentation style of the surrounding code. Some tests would be nice.

2 2

Re: [PATCH] implement MSIMODIFY_MERGE function in TABLE_modify
by Dmitry Timoshkov 26 Mar '12

26 Mar '12

Andoni Morales <ylatuya(a)gmail.com> wrote: > - case MSIMODIFY_REPLACE: > case MSIMODIFY_MERGE: > + /* check for a duplicated key */ > + r = msi_table_find_row( tv, rec, &row, column ); > + if (r == ERROR_SUCCESS) { > + /* check that both are identical */ > + r = compare_record (tv, row, rec); > + if (r != ERROR_SUCCESS) > + break; > + } else { > + r = table_validate_new( tv, rec, NULL ); > + if (r != ERROR_SUCCESS) > + break; > + r = TABLE_insert_row( view, rec, -1, FALSE ); > + break; > + } > + > + case MSIMODIFY_REPLACE: > case MSIMODIFY_VALIDATE: Please get rid of redundant 'break' statements, and add one at the end of case processing. -- Dmitry.

1 0

PDB format documentation.
by Svyatoslav Kuzmich 26 Mar '12

26 Mar '12

Hello dear Wine mailing list! I've found that Wine dbghelp.dll includes PDB file parser. Does anyone know where I can find documentation of PDB internal structure? Thanks, Svyatoslav Kuzmich

2 1

Re: My Idea for GSOC
by Daniel Oom 25 Mar '12

25 Mar '12

I think I accidentally dropped wine-devel, I have re-added and hope it does not create any trouble. And thanks for the explanation, but I'm not sure I fully understand how the different versions of direct3d interact within wine's implementation. I will probably figure it out in time. Also I will try to come up with a better test that compares lighting-settings as this was fun and fine introduction to wine. On Wed, Mar 21, 2012 at 15:18, Stefan Dösinger <stefandoesinger(a)gmx.at>wrote: > Hi, > > Did you run the test on Windows? The purpose of the tests is not do > document > what we think should happen, but figure out how Windows behaves, and then > replicate the same behavior. > > Is suspect your test fails on Windows because you're verifying that > lighting > is on or off in the wrong way. IDirect3DDevice2_GetRenderState(device, > D3DRENDERSTATE_LIGHTING, &value) will most likely not work in this way > because > D3DRENDERSTATE_LIGHTING does not exist in IDirect3DDevice2. You have to > set up > the d3d states in a way that rendering produces a different result with > lighting on vs lighting off, then read back the rendering result(there's > already a get_pixel_color function for that) and verify that you get the > correct color. > > A basic recipie for that: With lighting off, you get the diffuse color in > the > vertex as final color(well, assuming that stuff like texturing, fog, etc. > are > off too). With lighting on it runs through the d3d lighting > calculations[1]. > If you disable all lights(d3d default), set the global ambient light to > black(in later d3d there's a renderstate for that, in d3d2 I suspect that's > part of D3DLIGHT and IDirect3DLight*), and set the emissive material > property > to a color != black, your emissive color will be the final color(since the > ambient, diffuse and specular components of the equation are zero). By > setting > the vertex color and emissive material color to different colors you can > tell > if lighting is on or off. > > Cheers, > Stefan > > PS: It's prefered to keep such discussions in public, ie with wine-devel > CCed. > I haven't CCed wine-devel yet, and I'm not sure if you dropped it or if I > dropped it accidentally. > > 1: http://msdn.microsoft.com/en- > us/library/windows/desktop/bb147178(v=vs.85).aspx > > Am Mittwoch, 21. März 2012, 09:25:40 schrieb Daniel Oom: > > I have poked around a bit with the source and managed to add tests that > > checks if lighting is disabled/enabled in device2 and device7. I also > added > > SetRenderState in IDirect3DDeviceImpl_2_DrawPrimitive. The tests works > but > > I have not checked what effect the change has in other circumstances. > > > > I attached a patch in hopefully the preferred format. > > > > On Sat, Mar 10, 2012 at 22:04, Stefan Dösinger > <stefandoesinger(a)gmx.at>wrote: > > > Am Samstag, 10. März 2012, 17:22:51 schrieb Daniel Oom: > > > > Hi, > > > > > > > > Writing tests, or implementing the command line tools seems like > > > > something I could do. I'm kinda leaning towards the command line > > > > tools, since it would offer a chance to thoroughly learn the shading > > > > languages. > > > > > > For learning purposes writing tests and fixing bugs uncovered by them > > > will be > > > better. The command line tools are mostly about parsing parameters and > > > forwarding them to d3dx9 functions(*). > > > > > > If you want to look a little bit in either proposal(we recommend that > in > > > general): > > > > > > For the test stuff, take a look at IDirect3DDeviceImpl_2_DrawPrimitive > > > in > > > dlls/ddraw/device.c. It thunks IDirect3DDevice2::DrawPrimitive to > > > IDirect3DDevice7::DrawPrimitive. The main difference is the VertexType > > > parameter. It is a D3DVERTEXTYPE in the IDirect3DDevice2 method, and a > > > DWORD > > > with D3DFVF_* flags in Device7. Our thunk simply converts between these > > > two, > > > but a deeper difference a user noticed is that D3DVT_LVERTEX in Device2 > > > disables lighting calculations, whereas the equivalent D3DFVF flag > > > collection > > > in Device3 and Device7 does not. Device3 and newer have > > > D3DRENDERSTATE_LIGHTING to enable / disable lighting, but this render > > > state does not exist in Device2. > > > > > > Fixing this is fairly straightforward, just call > > > SetRenderState(LIGHTING, > > > ...) > > > in the thunk, but it needs some tests to answer / show the following: > > > > > > * Show that D3DVT_LVERTEX indeed disables lighting, and D3DVT_VERTEX > > > enables > > > it > > > * Show that D3DFVF_LVERTEX does not influence lighting in Device2 and > > > Device7(D3DFVF_TLVERTEX disables all vertex processing in all d3d > > > versions, this is already tested and implemented) > > > * Test what happens when you call SetRenderState and GetRenderState in > > > Device2. > > > * Probably others > > > > > > There are numerous things like that that need testing and probably > > > fixes. > > > This > > > is just one example that happens to be on my todo list. ddraw tests go > > > to > > > dlls/ddraw/tests/ddraw*.c. The other files should be moved to the > > > tests/ddraw*.c files and extended to cover all ddraw versions. > > > > > > For the command line tools, download an older version of the directx > sdk > > > that > > > still has vsa.exe and psa.exe(I think 2007 ones were the last ones) and > > > compare their command line parameters to > > > d3dx9.D3DXAssembleShaderFromFile > > > and > > > friends. > > > > > > The tests are certainly the more useful task. vsa.exe and psa.exe would > > > mainly > > > serve developer convenience when writing d3d8 and d3d9 tests since we > > > wouldn't > > > need an ancient dx sdk to assemble our own test shaders. d3d tests and > > > fixes > > > fix actual games. > > > > > > Enjoy, > > > Stefan > > > > > > (*) Actually, that's not how native vsa/psa work. They seem to have > > > their > > > own > > > copy-pasted version of the compiler and assembler, or they link > > > statically. We > > > should probably do it by calling d3dx9 though, especially for tools > that > > > mainly serve developer convenience. >

2 2

re: PDB format documentation.
by Dan Kegel 25 Mar '12

25 Mar '12

Svyatoslav wrote: > I've found that Wine dbghelp.dll includes PDB file parser. Does anyone > know where I can find documentation of PDB internal structure? I think you've found it :-) As you probably know, PDB is an undocumented format. I suspect the best you can find are scattered posts like http://moyix.blogspot.com/2007/08/pdb-stream-decomposition.html http://www.godevtool.com/Other/pdb.htm from people who reverse engineer bits of it. Although http://moyix.blogspot.com/2007/08/pdb-stream-decomposition.html claims http://ccimetadata.codeplex.com/ has some interesting bits from the horse's mouth, and http://code.google.com/p/pdbparse/ http://code.google.com/p/pdbparser/ http://pdbparser.codeplex.com might be interesting.

1 0

re: GSoC proposal
by Dan Kegel 25 Mar '12

25 Mar '12

> submitting multiple proposals are explicitly allowed. True, but be careful, for two reasons: 1) there may have been cases where people who submit applications to two orgs fall through the cracks, with each org thinking the other was going to take him. 2) passion generally drives success, and unless you're like my friend who didn't sleep and got a triple major in four years (and now heads chip development for a major game console), splitting your passion between multiple applications could reduce the chances of either one being accepted. Going a bit further with a single application, e.g. by including [more] working patches, seems the better choice... assuming you pick a project that the organization really likes, anyway.

1 0

Wine and Window Management
by Roger Cruz 25 Mar '12

25 Mar '12

Could someone tell me if Wine has a built-in Window Manager of its own or does it count on the host's window manager for such things as window hierarchy (parent-child relationships), clipping, move, resize, iconify, etc? I want to run Wine on an environment which lacks X and I have been told conflicting information on whether I need to write my own window manager. It has always been my impression that Wine does all the window management so it must have a Windows window manager built-in. I'm interested in knowing that if I remove the X11 driver from Wine, whether I will have to also provide my own window manager or whether what is in Wine is sufficient. If there is a window manager in Wine, what type of functionality does it require from whatever I chose to replace X11 with? Thanks Roger R. Cruz

2 1

Re: GSoC proposal
by Hin-Tak Leung 25 Mar '12

25 Mar '12

--- On Sun, 25/3/12, Cheer Xiao <xiaqqaix(a)gmail.com> wrote: > 2012/3/25 Hin-Tak Leung <htl10(a)users.sourceforge.net>: > > --- On Sun, 25/3/12, Cheer Xiao <xiaqqaix(a)gmail.com> > wrote: > > > > <snipped> > >> So according to you and the thread Jerome > mentioned, uxtheme > >> is one of > >> the more tricky and less rewarding areas; so I will > set it > >> aside for > >> the moment and work on the IME proposal instead. > > <snipped> > > > > There is no reason why you cannot submit two proposals, > if you are interested in two areas. You do not get penalized > for doing that, other than your own time of preparing two > proposals, which is twice the preparation work. > > > > In fact it is quite common for GSoC students to apply > for more than one project under different/same > organization. > > > > From the organization's point of view, it may be a good > decision to give the project to the strongest candidate if > there are multiple students applying to the same area; or > not to take up any student for lack of interests (from > mentors); in which case you might be still be taken up and > assigned to your "2nd" choice project. > > > > (poor applications - showing no understandings of the > background technology, etc - are rejected, so in that sense > you are penalized if you cannot devote enough time to your > proposal(s), if you divide your efforts). > > > > Thanks for the clarification. On the "multiple proposals" idea, in fact it is explicitly in the GSoC application schedule that there is a final decision afternoon or something, at which some organization admins come together to decide which organization would take a student, if a student had submitted multiple strong proposals to multiple organizations, and multiple organizations had decided to accept the same student to work on two different proposals. So submitting multiple proposals are explicitly allowed. Obviously, if you submit two proposals to the *same* organization, one of your applications would certainly be dropped at some intermediate stage before reaching that final stage, because they are reviewed by the same people (and there are some communications/decisions between organizations *before* that final stage, if multiple applications are made) . This is just because a student cannot be actually working on two projects over the same summer period, so all except one proposals must be turned down/withdrawn *eventually*. I am just saying that, if you feel like you could be happy working on more than one area, and is confident you can get a good proposal in for each (for the same organization, or different ones), by all means submit more than one proposals.

1 0

RFC: A donation for Corel Draw 12 - support.
by Gerold Jens Wucherpfennig 24 Mar '12

24 Mar '12

Hi, how much money do I have to donate to winehq.org to let someone fix Wine for CorelDraw 12? http://appdb.winehq.org/objectManager.php?sClass=version&iId=2390 Installation worked, but Corel is not usable and only reports: "Registry Corrupt - The UI Language registration list is invalid" I've donated a few dollars some years ago to wine and I even coded some cabinet.dll stuff some years ago... Maybe someone can help me with fixing this? Best Regards, Gerold

1 0

XTestFakeKeyEvent events postponed until wine process exits
by Ilya Basin 24 Mar '12

24 Mar '12

Hi list. Currently SendInput() works only with wine windows. I need to send keypresses to all windows, so I created a winelib dll that uses XTestFakeKeyEvent. I call this function from a wine process, but all my fake key presses wait for the process to exit. What is the reason?

1 0

Re: [website] Spanish translation for release 1.5.0
by Frédéric Delanoy 24 Mar '12

24 Mar '12

On Sat, Mar 24, 2012 at 12:13, Eduardo García <eduardo.garcia(a)gmx.com> wrote: > You should send diff using git (e.g. with 'git format-patch -k 1) i.e. sthg like http://source.winehq.org/patches/data/84646

1 0

Re: [PATCH] mscoree: Print the correct values in a TRACE.
by Nicolas Le Cam 23 Mar '12

23 Mar '12

Le 23 mars 2012 21:41, Lauri Kenttä <lauri.kentta(a)gmail.com> a écrit : > --- > dlls/mscoree/mscoree_main.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/dlls/mscoree/mscoree_main.c b/dlls/mscoree/mscoree_main.c > index 1aa120f..0ebc813 100644 > --- a/dlls/mscoree/mscoree_main.c > +++ b/dlls/mscoree/mscoree_main.c > @@ -359,7 +359,7 @@ HRESULT WINAPI GetRequestedRuntimeInfo(LPCWSTR pExe, LPCWSTR pwszVersion, LPCWST > > HRESULT WINAPI GetRequestedRuntimeVersion(LPWSTR pExe, LPWSTR pVersion, DWORD cchBuffer, DWORD *dwlength) > { > - TRACE("(%s, %p, %d, %p)\n", debugstr_w(pExe), debugstr_w(pExe), cchBuffer, dwlength); > + TRACE("(%s, %p, %d, %p)\n", debugstr_w(pExe), pVersion, cchBuffer, dwlength); > > if(!dwlength) > return E_POINTER; > -- > 1.7.9.4 > > > Hi Lauri, Should be %s debugstr_w(pVersion) IMHO. -- Nicolas Le Cam

2 2

Re: mscoree: Print the debug string and not the pointer to it.
by Lauri Kenttä 23 Mar '12

23 Mar '12

On 2012-03-22 00:36, Michael Stefaniuc wrote: > HRESULT WINAPI GetRequestedRuntimeVersion(LPWSTR pExe, LPWSTR > pVersion, DWORD cchBuffer, DWORD *dwlength) > { > - TRACE("(%s, %p, %d, %p)\n", debugstr_w(pExe), debugstr_w(pExe), > cchBuffer, dwlength); > + TRACE("(%s, %s, %d, %p)\n", debugstr_w(pExe), debugstr_w(pExe), > cchBuffer, dwlength); Why is pExe printed two times? Maybe the second one should be pVersion? -- Lauri Kenttä

2 1

GSoC 2012 - Implement a few missing functions in D3DX9
by Józef Kucia 21 Mar '12

21 Mar '12

Hi there, I'm writing to discuss my project proposal for upcoming Google Summer of Code. I was recently playing with Wine, looking around in the code and searching through Wine bugzilla. As a result I found out that there is still a quite number of functions missing in Wine's D3DX implementation. However, some of them are probably not used much in a real software. For example, the mostly unimplemented ID3DXSkinInfo interface seems to be not used frequently. In this email I would like to present things which I would like to implement. I hope that implementation of this functions, or at least some of them, could improve Wine compatibility with a few real applications. I would like to implement the following things: * Implement D3DXCreateRenderToSurface function and ID3DXRenderToSurface interface. * Finish the implementation of ID3DXFont, particularly ID3DXFont::DrawTextA and ID3DXFont::DrawTextW functions. * Implement D3DXCreateCubeTextureFrom* and D3DXCreateVolumeTextureFrom* functions. * Add support for DDS file format in D3DXGetImageInfoFrom* functions. I think I could also implement a few missing functions in ID3DXConstantTable interface, as a bonus task. I'm looking forward for a feedback. If you find any D3DX's function more important than functions enumerated by me, please let me know. I'm also looking for applications with heavy usage of D3DX dlls, especially applications which are using unimplemented or partially implemented functions (yes, I'm aware about http://wiki.winehq.org/DirectX-D3DX9). Cheers, Józef Kucia

4 8

Updating GSoC proposal
by Jacek Caban 21 Mar '12

21 Mar '12

Hi all, GSoC is starting this year and, if we want to have good applications, we need to update our proposals. Usually the most attention is directed into adding new ones, while we keep obviously bad (or just bad IMO) proposals on the page. I'm planning to remove following project proposals: Security - implement sandboxing Theming - Implement Wine theming support NTDLL - support performance registry keys Winelib Aware Scons (or cmake) Cleanup Winemenubuilder to support generating Application Bundles on Mac OS X Wine-based application virtualization If someone knows a reason to not remove them, please reply. Cheers, Jacek

9 16

Re: Changed UrlGetPartA and UrlGetPartW to return the correct (different) values.
by Nikolay Sivov 21 Mar '12

21 Mar '12

On 3/21/2012 09:24, Eric Culp wrote: > On Wed, Mar 21, 2012 at 2:59 AM, Nikolay Sivov <bunglehead(a)gmail.com > <mailto:bunglehead@gmail.com>> wrote: > > On 3/21/2012 08:58, Eric Culp wrote: > > The two functions have different return values on windows for > analogous inputs. > Changed to match windows behavior. > --- > dlls/shlwapi/url.c | 12 ++++++++++-- > 1 file changed, 10 insertions(+), 2 deletions(-) > > Please add some tests for that. > > I think it's already covered by > > dlls/shlwapi/tests/url.c:672 > res = pUrlGetPartA("hi", szPart, &dwSize, URL_PART_SCHEME, 0); > ok (res==S_FALSE, "UrlGetPartA(\"hi\") returned %08X\n", res); > > and > > dlls/shlwapi/tests/url.c:685 > res = pUrlGetPartW(hiW, bufW, &dwSize, URL_PART_SCHEME, 0); > todo_wine ok(res==S_OK, "UrlGetPartW(\"hi\") returned %08X\n", res); > > Line 686 was the one that previously triggered a todo. Should the > todo_wine be removed? Yes, you should run 'make test' and get no errors after your changes. If you fixed todo it should be removed, if you break existing test you should fix your patch. > > > >

1 0

Re: Changed UrlGetPartA and UrlGetPartW to return the correct (different) values.
by Nikolay Sivov 21 Mar '12

21 Mar '12

On 3/21/2012 08:58, Eric Culp wrote: > The two functions have different return values on windows for analogous inputs. > Changed to match windows behavior. > --- > dlls/shlwapi/url.c | 12 ++++++++++-- > 1 file changed, 10 insertions(+), 2 deletions(-) Please add some tests for that.

1 0

re: Are we the reason Apple isn't helping us?
by Dan Kegel 21 Mar '12

21 Mar '12

Vitaliy wrote: > Can you show me exactly where did I yell at him? Or where I wasn't polite enough I think it was http://bugs.winehq.org/show_bug.cgi?id=29922#c14 where you wrote "Would bugzilla admin please remove / ban this user? Jeremy, you've been told by the only person who commits stuff to Wine - Everything working fine, there is nothing to fix. Period, conversation over. If you reopen this bug it will be an indication to bad your user record." There ought to be some wiggle room granted people who work at important neighboring projects who are unable for whatever reason to follow Wine's usual conventions; at the very least, we shouldn't actively drive them away like that. - Dan

6 10

Re: usp10: properly handle invalide arguments to ScriptBreak
by Nikolay Sivov 19 Mar '12

19 Mar '12

On 3/19/2012 18:56, Aric Stewart wrote: > Fix for bug 30219 > --- > dlls/usp10/usp10.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) Could you add a test for that? Or there's some troubles with that, like different native usp10 versions behaviour or anything? >

1 0

Networking+wine
by prateek papriwal 19 Mar '12

19 Mar '12

Networking + wine (like as running uTorrent in ubuntu) can be very dangerous. I feel there should be some sandboxing(as in Windows) to prevent frequent attacks. I would be very interested in implementing sandboxing for running Wine applications. Thank you Prateek

3 3

Re: [1/2] msvcrt: Add tmpfile_s implementation (resend)
by Alexandre Julliard 18 Mar '12

18 Mar '12

André Hentschel <nerv(a)dawncrow.de> writes: > +int CDECL MSVCRT_tmpfile_s(MSVCRT_FILE** file) > +{ > + if (!file) { > + *MSVCRT__errno() = MSVCRT_EINVAL; > + return MSVCRT_EINVAL; > + } That's not the right way to check parameters in _s functions. -- Alexandre Julliard julliard(a)winehq.org

2 1

Re: po: Update Polish translation.
by Frédéric Delanoy 17 Mar '12

17 Mar '12

On Sat, Mar 17, 2012 at 19:27, Łukasz Wojniłowicz <lukasz.wojnilowicz(a)gmail.com> wrote: > Dnia sobota, 17 marca 2012 15:29:25 piszesz: >> On Fri, Mar 16, 2012 at 20:15, Łukasz Wojniłowicz >> >> <lukasz.wojnilowicz(a)gmail.com> wrote: >> > --- >> > po/pl.po | 70 >> > ++++++++++++++++++++++++++++--------------------------------- 1 files >> > changed, 32 insertions(+), 38 deletions(-) >> > >> > #: cryptui.rc:296 >> > -#, fuzzy >> > #| msgid "Cryptographic Message Syntax Standard/PKCS #7 Messages >> > (.p7b)" >> >> Those #| lines must be removed as well (previous msgid) >> >> Frédéric > > I edited it through lokalize (computer aided translation application) and it > didn't remove it. Is it vital for this patch to be accepted? AJ doesn't want those, and I agree (no need for former msgid when the entry is updated: that's just noise) I guess it should appear as comment in localize (not tested), or else you can use an editor/sed to remove those. Frédéric

1 0

Re: po: Update Polish translation.
by Frédéric Delanoy 17 Mar '12

17 Mar '12

On Fri, Mar 16, 2012 at 20:15, Łukasz Wojniłowicz <lukasz.wojnilowicz(a)gmail.com> wrote: > --- > po/pl.po | 70 ++++++++++++++++++++++++++++--------------------------------- > 1 files changed, 32 insertions(+), 38 deletions(-) > > #: cryptui.rc:296 > -#, fuzzy > #| msgid "Cryptographic Message Syntax Standard/PKCS #7 Messages (.p7b)" Those #| lines must be removed as well (previous msgid) Frédéric

1 0

What happened to my patch? --> msvcrt/file.c: file mode T (temporary file) (try 4)
by Robert van Herk 17 Mar '12

17 Mar '12

Hi all, I never heard from my patch again. Has it fallen into a void? Kind regards, Robert From: mijnspamboxje(a)hotmail.com To: wine-patches(a)winehq.org Subject: msvcrt/file.c: file mode T (temporary file) (try 4) Date: Tue, 28 Feb 2012 20:55:07 +0100 Dear all, Hereby try 4. Tested by Marvin through my brand new Marvin-test-account... Kind regards, Robert van Herk

2 2

Regarding GSoC 2012 project Ideas
by Jaldeep Vasavada 17 Mar '12

17 Mar '12

Hello, I am Jaldeep, studying Computer Science, in BITS Pilani, India. I checked some projects described on GSoC website. I am interested to work with a project in CMD-project, a parser implementation. Can you please guide in brief about the project work? Can you please explain me the procedure about application for a particular project? Thank You -- Regards Jaldeep Vasavada

1 0

Vacation
by Alexandre Julliard 16 Mar '12

16 Mar '12

Folks, I'll be on vacation for a week, so there won't be any commits. Hopefully we have caused enough regressions in 1.5.0 to keep all you busy ;-) -- Alexandre Julliard julliard(a)winehq.org

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel March 2012