wine-devel July 2013

63 participants
129 discussions

Possibility of adding a new patch status
by Hugh McMaster 14 Aug '13

14 Aug '13

Hi everyone, Wine patches currently have a status described in http://source.winehq.org/patches, yet for patches with the status of 'New', the status becomes confusing. The legend describes 'New' status as "Patch not even looked at yet, there's still hope...". This is ideal for new patches submitted within that 24-hour commit cycle. But I'm finding it difficult to follow patches that remain with a status of 'New' for longer than the 24-hour patch cycle. Obviously, on the weekend, patches are held over till Monday, so a longer lead-time is expected. During weekdays, however, it is unclear what is happening with some patches. This, ultimately, raises the question of timeliness. Has the patch been looked at? If it has, the status often describes what action was taken - committed, rejected, superseded, etc. This is fine, but some patches remain with a status of 'New'. Experience has told me that patches remaining with a status of 'New' are incorrect in some way. But this is not always the case. If the patch is incorrect, but close to being accepted, the patch's status should reflect this, by changing to something like "Revision needed". Of course, the "Rejected" status is also appropriate, depending on the severity of coding error. Also, there are likely to be many times when the maintainer has not had time to evaluate some patches. This means the patch is not new (i.e. recently submitted), but is awaiting review. Once again, I believe the patch status should reflect this situation. The status could be "Not yet reviewed". In summary, the 'New' status should be reserved for patches that are actually new. Just some thoughts.

3 7

Re: [PATCH 4/5] d3dx9/tests: Add ID3DXConstantTable struct test.
by Matteo Bruni 02 Aug '13

02 Aug '13

2013/7/24 Rico Schüller <kgbricola(a)web.de>: > --- > dlls/d3dx9_36/tests/shader.c | 308 > +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 308 insertions(+) > This is okay, but as a followup can you add some tests with mixed-type structs? Something like: struct { float f; int i; bool b; }; If you have already written tests of this kind, I'd like to know what does the compiler do in this case :)

2 6

Re: po: Add English (Canada) resource [Take 2]
by Ken Sharp 02 Aug '13

02 Aug '13

Please disregard this patch. I missed a couple of words and with those corrected en_CA.po becomes identical to en.po (except that "serialisation" is fuzzy) and Wine defaults to that anyway for Canadian English. Will re-submit if there are any changes (just noticed -able/-eable). Will keep an eye on the English translations. On 30/07/13 22:37, Ken Sharp wrote: > - Re-based to latest git > - Removed all the fuzzies thanks to http://www.etymonline.com/index.php > > Turns out all the -ise/-ize words used in Wine are of Latin origin anyway. > > > -------- Original Message -------- > Subject: po: Add English (Canada) resource > Date: Mon, 22 Jul 2013 19:28:51 +0100 > From: Ken Sharp <kennybobs(a)o2.co.uk> > To: wine-patches(a)winehq.org > > Canadian English follows some British/French rules but not others. > > I have left some of the -ise/-ize words fuzzy because: > > "the etymological convention that verbs derived from Greek roots are > spelled with -ize and those from Latin with -ise is preserved in that > practice." > http://en.wikipedia.org/wiki/Canadian_english#Spelling_and_dictionaries > > I tried looking for the origins of the words and I couldn't get any. The > non-fuzzies are correct. > > With British, US and Canadian I believe all the English variations (used > in Wine) are covered, except Philippines (follows US rules). > > >

1 1

gdi32: Don't let the gdi32 driver allocate memory in the dplayx region.
by Alexei Svitkine 01 Aug '13

01 Aug '13

Don't let the gdi32 driver allocate memory in the dplayx region. Fixes bug: http://bugs.winehq.org/show_bug.cgi?id=34095 The issue is that the dplayx code in wine needs to allocate some memory at a static address (0x50000000) and loading the Mac native gdi driver ends up using that part of the address space. This patch fixes that by reserving that part of memory while the display driver is initialized and releasing it after. --- dlls/gdi32/driver.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

2 5

Re: [PATCH 11/11] appelp: Add tests.
by Marvin 31 Jul '13

31 Jul '13

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=26546 Your paranoid android. === WINEBUILD (build) === Patch failed to apply

1 0

Re: [PATCH 1/4] riched20: Basic ITextDocument implementation for ITextServices (try 3)
by Alexandre Julliard 31 Jul '13

31 Jul '13

Caibin Chen <tigersoldi(a)gmail.com> writes: > Thanks Jacek for reviewing. This time I send all the changes I have in > 4 patches to make it clear that ReTxtDoc is reused between txtsrv.c > and richole.c > - Suppressed Patch 97331 > - Change log from try 2: > - follow COM naming convention > - move ReTxtDoc definition to header, removed > ReTxtDoc_get_ITextDocument() function > - remove COM aggregation test for ITextDocument, only test > ITextService supports querying for the interface. > > --- > dlls/riched20/Makefile.in | 1 + > dlls/riched20/tests/txtsrv.c | 10 ++ > dlls/riched20/txtdoc.c | 270 +++++++++++++++++++++++++++++++++++++++++++ > dlls/riched20/txtdoc.h | 51 ++++++++ > dlls/riched20/txtsrv.c | 6 + Please avoid adding too many source files. In particular, if you have to add new headers and define objects there, it's a sign that things should be grouped in the same file. That's even more true for ITextDocument that already exists. -- Alexandre Julliard julliard(a)winehq.org

2 4

Re: [PATCH] d3dx9_36: Filter out D3DCompile warning messages that are not present with D3DCompileShader.
by Stefan Dösinger 31 Jul '13

31 Jul '13

Hi, Am 31.07.2013 um 09:10 schrieb Christian Costa <titan.costa(a)gmail.com>: > + if (!(strstr(line_out, "warning X3206:") && strstr(line_out, "implicit truncation of vector type"))) > + line_out += line_size; msvc localizes compiler errors and warnings. Are you sure d3dcompiler.dll doesn't do that? Wrt the parsing code, wouldn't it be nicer to use strtok_r to split the buffer into separate lines? I am not sure that parsing the errors and warnings like that is a good thing, but I don't know d3dx9 and d3dcompiler well enough to give a final judgement on that.

2 2

Re: ws2_32/tests: Test the precedence of parameters while creating a socket in WSASocket()
by Austin English 31 Jul '13

31 Jul '13

On Tue, Jul 30, 2013 at 5:13 PM, Bruno Jesus <00cpxxx(a)gmail.com> wrote: > > You forgot the patch. -- -Austin

3 2

d3dx9: Replace M_PI by its D3DX equivalent
by Nozomi Kodama 31 Jul '13

31 Jul '13

What is the problem with patch: http://source.winehq.org/patches/data/97500 M_PI is never used in D3DX (moreover it is deprecated in C99) Nozomi

2 1

Re: kernel32: Fix parameters checking for GetVolumePathName()
by Alexandre Julliard 31 Jul '13

31 Jul '13

Bruno Jesus <00cpxxx(a)gmail.com> writes: > @@ -1813,6 +1821,8 @@ BOOL WINAPI GetVolumePathNameW(LPCWSTR filename, LPWSTR volumepathname, DWORD bu > volumepathname[3] = 0; > return TRUE; > } > + > + SetLastError(ERROR_FILENAME_EXCED_RANGE); > return FALSE; This doesn't really make sense as a general error. -- Alexandre Julliard julliard(a)winehq.org

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel July 2013