wine-devel

wine-devel@winehq.org

9 participants
84458 discussions

Re: first go at some notepad changes
by Dmitry Timoshkov 28 Jul '03

28 Jul '03

"Jonathan Wilson" <jonwil(a)tpgi.com.au> wrote: > > A possibility that status bar will change its size behind your back > > justifies the use of GetWindowRect. > ok, good point. > I intend to change it to use GetWindowRect. > But I am going to keep the WM_SIZE stuff in there unless someone can show a > reason why its a bad idea. WM_SIZE is usually sent due to a change in the window size in order to notify window and allow it to do some necessary job. Sending a bogus WM_SIZE might easily mess the thing up since the size you are sending might be not a real window size. -- Dmitry.

1 0

Re: first go at some notepad changes
by Dmitry Timoshkov 28 Jul '03

28 Jul '03

"Jonathan Wilson" <jonwil(a)tpgi.com.au> wrote: > +VOID DIALOG_ShowStatusBar(VOID) > +{ > + RECT rcs; > + RECT rc; > + GetClientRect(Globals.hMainWnd, &rc); > + Globals.bStatusBarEnabled = !Globals.bStatusBarEnabled; > + if (Globals.bStatusBarEnabled == TRUE) > + { > + ShowWindow(Globals.hStatusBar,SW_SHOW); > + GetClientRect(Globals.hStatusBar,&rcs); > + Globals.iStatusBarHeight = rcs.bottom - rcs.top; > + SendMessage(Globals.hStatusBar, WM_SIZE, 0, 0); > case WM_SIZE: > - SetWindowPos(Globals.hEdit, NULL, 0, 0, LOWORD(lParam), HIWORD(lParam), > + SetWindowPos(Globals.hEdit, NULL, 0, 0, LOWORD(lParam), (HIWORD(lParam)-Globals.iStatusBarHeight), > SWP_NOOWNERZORDER | SWP_NOZORDER); > + if (Globals.bStatusBarEnabled == TRUE) > + { > + SendMessage(Globals.hStatusBar, WM_SIZE, 0, 0); > + } Do not send bogus WM_SIZE messages, use SetWindowPos instead. Remove iStatusBarHeight from globals and use IsWindowVisible and GetWindowRect when you need to take into account status bar size. -- Dmitry

4 5

Re: [Mono-winforms-list] SWF Examples/Tests
by Mike Hearn 28 Jul '03

28 Jul '03

This will be really great for Wine also, I'm forwarding this on to the Wine list. We really need tests like this, but AFAIK nobody has ever done them. As you can see the Wine widget toolkit does not implement all the features of the MS Windows one (primarily because very few apps actually use them). Nonetheless, adding them should be easy, and it's good to have a refererence like this. thanks -mike On Mon, 2003-07-28 at 11:47, Timothy Parez wrote: > Hi, > > Some time ago I started writing simple tests for SWF control rendering. > At that time I had no way to manage them, but now Duncan has created a > new page on the Mono Wiki where I will add the samples. > > Each sample contains the sourcecode, makefile and screenshots. > I will try to create these samples for each of the controls in SWF > > I will however make seperate projects for controls which use images, > because these don't seem to run on SWF yet. (For example a button with a > background image) > > You can find the wiki page here: > http://www.nullenvoid.com/mono/wiki/index.php/WineSamples > > I hope this helps > Timothy. > > > _______________________________________________ > Mono-winforms-list maillist - Mono-winforms-list(a)lists.ximian.com > http://lists.ximian.com/mailman/listinfo/mono-winforms-list -- Mike Hearn <m.hearn(a)signal.qinetiq.com> QinetiQ - Malvern Technology Center

1 0

Fw: Child's OninitDialog and Parent's OnKillFocus
by Omer Sahin (Link Bilgisayar) 28 Jul '03

28 Jul '03

In a CFormView , I create and display a CToolbarDialog. I use DoModal to display the dialog. A control (in Parent Windows) 's OnKillFocus event is called AFTER the child dialog's OninitDialog. This seems meaningfull to me, but in my Windows 2000 professional machine, child's OninitDialog is called BEFORE parent control's OnKillFocus. What should be done to correct this problem?

2 2

RE: Direct access to LPT1
by E Lea 28 Jul '03

28 Jul '03

> > The plotter doesn't need a specific driver - it doesn't even have one. In > > Windows it uses any old printer driver just to open the printer port, then > > sends commands to the plotter through the printer driver. > > > > Should it not be possible to do this with Wine? Possibly not with CUPS > > though... > Well that should work with cups too, you need to configure a printer > with model "RAW". It doen't - I get a an error saying "Call to StartDocPrinter failed"

1 0

Re: cab_F_00: codename: "whee"
by Dimitrie O. Paun 28 Jul '03

28 Jul '03

On July 27, 2003 04:46 pm, Gregory M. Turner wrote: > - WARN("FDIIsCabinet failed.\n"); > + ERR("FDIIsCabinet failed.\n"); Why these changes, they don't seem to make sense. The function handles the problem just fine, no need to spam the user with such messages, we already have too many IMO. -- Dimi.

2 2

Re: first go at some notepad changes
by Dimitrie O. Paun 28 Jul '03

28 Jul '03

On July 27, 2003 08:16 am, Jonathan Wilson wrote: > 25.modify WM_SIZE to correctly size the edit controll if the status bar > is visble and to tell the status bar to resize itself if needed Shouldn't the status bar do this automatically when CCS_BOTTOM is specified? If our status bar needs some work to have this style properly implemented, we better fix it there. -- Dimi.

1 0

Work for hire^H^H^H^Hgrade
by Shachar Shemesh 28 Jul '03

28 Jul '03

Hi all, A prof. in a locale university is doing a summer course about open source development. I gave them a short power point lecture (on Linux :-), and showed them IE running, and managed to hook one vulenteer to do his assignment in Wine. I have managed to interest him in some of open issues that are close to my heart (i.e. - BiDi related issues). However, this is far from final. I'm sure he would love to hear about other interesting areas, but some criteria must be kept. It must be a task that is moreorless self contained (he is supposed to be graded for it at the end), and it must be something known to be possible in a reasonable amount of hours (i.e - it can't be "implementing MSI"). Then again, it can't be something too trivial (i.e. - not "localize notepad"). Currently at hand are adding encoding selection to the font dlg (and making it ANSI call Unicode in the process), and adding BiDi to the edit control. If you feel you have something else that may be of interest to him, feel free to try and grab him away :-) Shachar P.S. No, I have not dropped of the face of the planet, and I still read this list. Just too busy to be doing anything useful (except hiring other working hands, which may count for something, I guess). I'll be back, though. -- Shachar Shemesh Open Source integration consultant Home page & resume - http://www.shemesh.biz/

5 7

MACRO and other problems on porting to w32api headers
by Steven Edwards 28 Jul '03

28 Jul '03

Hello, I am trying to get some of the WINE dlls to build with the w32api package and am running in to problems with typedefs. When I try to build some of the dlls lets take mapi32 as a example I am getting a parse error because of this: typedef unsigned long FAR *LPLHANDLE, FAR *LPULONG; Also some of the functions and structures are declaired as STDCALL in MS_VC and w32api but in wine it is listed as CALLBACK and this causes problems. Is there any documentation anywhere on how I should deal with the macro FAR and CALLBACK type in the headers? Thanks Steven

1 0

[libmspack] A library for Microsoft compression formats
by Michael B Allen 27 Jul '03

27 Jul '03

I haven't tried this lib but it looks well organized and clean which is rare so check it out or fwd this link to interested parties... http://www.kyz.uklinux.net/libmspack/ Mike

2 1

Mouse not working in old DOS game ("MadTV")
by Christian Neumair 26 Jul '03

26 Jul '03

Today I tried to play a game, which is cult in Europe and nearly unknown in the USA: MadTV. When trying to start it, I encountered a problem: The mouse cursor of the game wasn't moved together with the wine mouse cursor and wine spit out a lot of int irq fixme messages: "fixme:int:DOSVM_Int33Handler Position mouse cursor" So I created a log with --debugmsg +int appended. Since the first ~300.000 lines contained a lot of repititions I decided to completely trash them. The attached backtrace contains a few thousands of lines output. Maybe sb, of you already experienced this problem, too - or even works on a solution. regs, Chris

1 1

Re: cards.dll, first patch
by Alexandre Julliard 26 Jul '03

26 Jul '03

Jonathan Wilson <jonwil(a)tpgi.com.au> writes: > No code or images have been taken from anything thats (c) microsoft > although studying cards.dll in IDA did help me to figure out how it > all works :) That's not a good idea at all. Your code is obviously a straight transcription of the disassembled code, with lots of magic numbers and meaningless variable names. That is not an acceptable way of implementing something for Wine. -- Alexandre Julliard julliard(a)winehq.com

1 0

Mouse not working in old DOS game ("MadTV")
by Christian Neumair 26 Jul '03

26 Jul '03

1 0

notepad improvements?
by Jonathan Wilson 26 Jul '03

26 Jul '03

Are the notepad improvements from crossover office going to be merged into the main wine tree? What has to happen first?

2 2

How to compiling spec file and source file to generate a wine dll
by dd jj 25 Jul '03

25 Jul '03

Hello Finally I found the HOW-TO winelib which gives me a pretty useful example in it: 2. a Windows executable with WineLib DLL... .... During the compile process, a command like winebuild -fPIC -o winedll.spec.c -spec winedll.spec will be executed to create the file winedll.spec.c from information in the file winedll.spec. The file winedll.spec.c and winedll.c are compiled into object files and used to create the shared library. ...... My question is How to generate winedll.dll.so from winedll.spec.c and winedll.c and other source file like winedll.h if needed.. I am wondering whether someone can give me a detailed implementation command about this: It should something like "gcc -shared -Wl, -Bsymbolic -o ... or use winebuild directly.. Thanks --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software

1 0

RE: Direct access to LPT1
by E Lea 25 Jul '03

25 Jul '03

> E> I'm playing around with a program that controls a small "design > E> cutter" - it's basically a plotter that connects via the parallel > E> port. > > E> There is some Windows CAD software that knows about the plotter and > E> sends commands to it, as far as I can tell in one of two ways: > > E> 1) Through a printer driver. It doesn't seem too bothered about the > E> details of the driver though. I'm assuming that one would normally > E> use a generic, text-only Windows driver. This method, apparently, has > E> the advantage of the driver buffering the output > > Wine can't run Ring 0 drivers, like something ending in .sys/ .vxd The plotter doesn't need a specific driver - it doesn't even have one. In Windows it uses any old printer driver just to open the printer port, then sends commands to the plotter through the printer driver. Should it not be possible to do this with Wine? Possibly not with CUPS though...

2 1

Re: having problems with my spec file for cards.dll
by Dmitry Timoshkov 25 Jul '03

25 Jul '03

"Jonathan Wilson" <jonwil(a)tpgi.com.au> wrote: > > Only native Win32 compilers do that. gcc under Linux doesn't generate > > that crap. > aah, I was using MingW on windows to test the dll. You can use Wine build system in order to test your dll. For that you just need to make your new dll a part of the Wine dll tree (which you will need to do anyway). Wine makefiles already have all the needed tweaks to strip stdcall @xx suffixes when building under MinGW or Cygwin. > Looks like my .spec file should work when I solve this bitblt problem, > finish testing and move the code over to linux to add it to my WINE tree. ok. -- Dmitry.

3 3

RE: Direct access to LPT1
by E Lea 25 Jul '03

25 Jul '03

> > E> 2) The second method is a direct connection to LPT1. > E> With Wine, in the first case I get a message in a dialog box saying > E> the call to "StartDocPrinter" failed and > E> fixme:winspool:StartDocPrinterA (hPrinter=0x1, Level=0x1, > E> pDocInfo=0x408a28dc): stub > E> to stdout. > E> In the second case I get a dialog saying "LPT1 was not found" and > E> fixme:dosfs:DOSFS_OpenDevice device open L"LPT1" not supported (yet) > E> err:file:CreateFileW Couldn't open device L"LPT1"! > E> to stdout. > E> Is this a config issue? I'm assuming that is should be easier for me > E> to get the second method working. > > No. You hit an area of unimplemented functionality. > > However Win can translate direct port accesses, either as root to inp/outp > or when configured right, via /dev/parport I have ppdev, parport_pc and lp kernel modules installed. And [parallelports] "Lpt1" = "/dev/lp0" [ppdev] "378" = "/dev/parport0" [ports] "read" = "0x779,0x378,0x379,0x280-0x2a0" "write" = "0x779,0x378,0x379,0x280-0x2a0" in my ~/.wine/config Should this be enough to get it working? Or does the fact I get error messages about not being able to open LPT1 mean that the Windows program is behaving in such a way that the port access translation you describe will never work? > Perhaps look around if you don't > find some tool that talks to your device with direct hardware access. Win31 > programms might do so. I unfortunately don't have any choice in the tool I use - I'm tied to a specific app.

2 1

having problems with my spec file for cards.dll
by Jonathan Wilson 25 Jul '03

25 Jul '03

the MS Cards.dll is complled with "the dll does the cleanup" set to on (i.e. its using retn xx instructions). When I compile it, i get the @nn on the end of the names. This is a problem since cards.dll exports the names without the @nn How do I set things up in my .spec file?

2 1

Re: [patch] documentation patches
by Vincent Béron 25 Jul '03

25 Jul '03

Le mar 22/07/2003 à 12:43, Peter Hanecak a écrit : > Hello, > > while building Wine on "RedHat 8"-like system I encountered two typos in > Wine documentation which prevented me from "compiling" documentation with > jade (openjade-1.3.1-9). I'm interested in how exactly it prevented you to compile them, as I didn't have any problem to do so (although some other errors have caused the compilation to fail in the past). Special more strict switch? Docbook validator? Vincent

2 2

Focus Bug
by Dimitrie O. Paun 25 Jul '03

25 Jul '03

Summary: Clicking on the caption of a manage window does not move the focus as it should. This results in ugly artifacts. Steps to reproduce: 1. Fire up Notepad 2. Open the "Open" dialog (File | Open) 3. Expand the "Look in" dropdown (the one at the top, with the drives) 4. Click on the dialog caption, and drag it away Result: The dropdown does not close, and remains on the spot. Any way to know that the WM has now the focus, so we can release it? -- Dimi.

1 0

Still problmes about building winelib dll using winemaker and winedump
by dd jj 25 Jul '03

25 Jul '03

Hello everyone, Sorry to bother if there are lots of repeated comments with my original posts... So far, I failed to use winelib dll generated by wine tools: 1)winemaker: I copied all windows source codes (.h .c .dll .dsp files which are used to build natives dll under visual studio) into one directory, then execute: %winemaker --lower-uppercase -nomfc . %./configure --with-wine-includes=/usr/local/inlcude/wine/windows %make When I run wine ./ping.exe it shows the error then terminate: err:module:import_dll Loading module (file) pingdll.dll (which is needed by C:\ping\ping.exe) failed (error -1073741595) (Sorry, I forgot to mention this last time) 2)winedump: I generated a stub dll which fowarded all the requst to native dll, but I can't figure it out where I can put the exported function codes to the stub dll, cause I need reimplement windows dll to be a local shared library. Could anyone give me some comments on what I should solve these? I really got headache on this... Thanks a lot. -Lechun --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software

1 0

Re: Status_Wine #2 -- lostwages
by Brian Vincent (C) 25 Jul '03

25 Jul '03

>> So, may I ask if either of you plan to volunteer to write a *official* >> History/Time line page ? > >Im no writer, really, so no, I don't plan on working on this. >Hopefully a better word craftsman will volunteer soon... Pencil me in on this. I already have the makings of it. --------------- Brian Vincent Copper Mountain Telecom vincentb(a)coppercolorado.com

2 1

Re: Make aclocal.m4:WINE_GET_SONAME more flexible
by Alexandre Julliard 24 Jul '03

24 Jul '03

Todd Vierling <tv(a)pobox.com> writes: > The following patch to aclocal.m4 (will require a run of "autoconf" after > changing to pick up the change) will make WINE_GET_SONAME work on NetBSD, > and likely the other *BSDs. It is still Linux compatible -- in fact, this > new incarnation returns the fully qualified path to the shared object, > eliminating fears of runtime linking path searches. I don't think that's a good idea. There is no guarantee that the full path is valid on other systems, and we don't want to bypass the user's LD_LIBRARY_PATH settings. -- Alexandre Julliard julliard(a)winehq.com

2 2

Re: Make aclocal.m4:WINE_GET_SONAME more flexible
by Todd Vierling 24 Jul '03

24 Jul '03

On Thu, 24 Jul 2003, Todd Vierling wrote: : Because this patch deals mostly with handling of whitespace and tabs, I've : included a uuencoded version of the diff as well. ...And it would have been better if I had attached a correct copy of the diff (there were missing m4 quote-brackets in the originally posted version, sigh). ===== aclocal.m4.diff ===== Index: aclocal.m4 =================================================================== RCS file: /home/wine/wine/aclocal.m4,v retrieving revision 1.10 diff -u -r1.10 aclocal.m4 --- aclocal.m4 2 Apr 2003 23:27:46 -0000 1.10 +++ aclocal.m4 24 Jul 2003 21:15:08 -0000 @@ -38,7 +38,7 @@ [ac_get_soname_save_LIBS=$LIBS LIBS="-l$1 $3 $LIBS" AC_LINK_IFELSE([AC_LANG_CALL([], [$2])], - [ac_cv_lib_soname_$1=`$ac_cv_path_LDD conftest$ac_exeext | grep lib$1\\.so | sed 's/^[[ ]]*$[[^ ]]*$[[ ]]*=>.*$/\1/'` + [ac_cv_lib_soname_$1=`$ac_cv_path_LDD conftest$ac_exeext | grep lib$1\\.so | sed 's/^.*=>[[ ]]*$[[^ ]]*$.*/\1/'` if test "x$ac_cv_lib_soname_$1" = "x" then ac_cv_lib_soname_$1="lib$1.so" ========== begin 644 aclocal.m4.diff M26YD97@Z(&%C;&]C86PN;30*/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T] M/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/3T]/0I20U,@ M9FEL93H@+VAO;64O=VEN92]W:6YE+V%C;&]C86PN;30L=@IR971R:65V:6YG M(')E=FES:6]N(#$N,3`*9&EF9B`M=2`M<C$N,3`@86-L;V-A;"YM-`HM+2T@ M86-L;V-A;"YM-`DR($%P<B`R,#`S(#(S.C(W.C0V("TP,#`P"3$N,3`**RLK M(&%C;&]C86PN;30),C0@2G5L(#(P,#,@,C$Z,34Z,3<@+3`P,#`*0$`@+3,X M+#<@*S,X+#<@0$`*(%MA8U]G971?<V]N86UE7W-A=F5?3$E"4STD3$E"4PH@ M3$E"4STB+6PD,2`D,R`D3$E"4R(*("`(a)04-?3$E.2U])1D5,4T4H6T%#7TQ! M3D=?0T%,3"A;72P@6R0R72E=+`HM("!;86-?8W9?;&EB7W-O;F%M95\D,3U@ M)&%C7V-V7W!A=&A?3$1$(&-O;F9T97-T)&%C7V5X965X="!\(&=R97`@;&EB M)#%<7"YS;R!\('-E9"`G<R]>6UL@"5U=*EPH6UM>(`E=72I<*5M;(`E=72H] M/BXJ)"]<,2\G8`HK("!;86-?8W9?;&EB7W-O;F%M95\D,3U@)&%C7V-V7W!A M=&A?3$1$(&-O;F9T97-T)&%C7V5X965X="!\(&=R97`@;&EB)#%<7"YS;R!\ M('-E9"`G<R]>+BH]/EM;"2!=72I<*%M;7@D@75TJ7"DN*B]<,2\G8`H@("!I M9B!T97-T(")X)&%C7V-V7VQI8E]S;VYA;65?)#$B(#T@(G@B"B`@('1H96X* E("`@("`@86-?8W9?;&EB7W-O;F%M95\D,3TB;&EB)#$N<V\B"B`@ ` end -- -- Todd Vierling <tv(a)pobox.com>

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel