wine-devel

wine-devel@winehq.org

10 participants
84459 discussions

IE 5.01 setup cant download? [ie5setup.exe]
by Boris Reisig 20 Jul '02

20 Jul '02

Has anyone actually gotten IE 5 or even IE6 working natively under WINE yet? [even under the latest CVS?] For the last few months, I tried running a clean wine installation [without windows] and run ie5seup.exe or even ie6setup.exe and each time it trys to download information, It *always* complains that "Setup was unable to download information about available installation sites" and if I ever go to advanced and add a proxy, wine CRASHES with ["Unhandled exception: page fault on write access to 0x00000000 in 32-Bit mode."] ["Symbol h_errno is invalid"] ["Symbol __strtol_internal is invalid"] ["Symbol hack_digit is invalid"] ["0x4174ad58 (RICHED32.DLL.DllGetVersion+0x32e7f4 in wininet.dll.so:"] The question is has anyone gotten internet explorer installed just from using ie5setup.exe or ie6setup.exe ??

1 0

CVS Broken fixed.
by Boris Reisig 20 Jul '02

20 Jul '02

Ok, After I posted that message, I tried a "make depend" before my make and it seemed to have fixed the problem. This was *never* an issue before but it now works.

1 0

Patch for memory-mapping problem -- See VirtualQuery post
by Max 20 Jul '02

20 Jul '02

Well, I took off the dirty hack on virtual.c and put inside something that seems to me much more like a real solution. Took off in executable mapping VPROT_WRITE and VPROT_WRITECOPY flags and added VPROT_EXEC; that looks much more close to win2k mapping. The only difference now is in Type field, wine maps as MEM_PRIVATE and win2k as MEM_IMAGE (I guess that's the right one, but no time now to check. Here the attached patch.... any comment appreciated :-) Regards Max

1 0

CVS broken?
by David D. Hagood 20 Jul '02

20 Jul '02

I'm trying to rebuild Wine from a CVS pull of a few seconds ago (Sat Jul 20 13:58:37 UTC 2002), and I am getting the following error: make[2]: Entering directory `/usr/src/wine/tools/widl' gcc -c -I. -I. -I../../include -I../../include -I../../tools/wpp -g -O2 -Wall -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o header.o header.c In file included from header.c:36: ../../tools/wpp/y.tab.h:6: parse error before `wrc_sll_t' ../../tools/wpp/y.tab.h:6: warning: no semicolon at end of struct or union ../../tools/wpp/y.tab.h:7: warning: type defaults to `int' in declaration of `ull' ../../tools/wpp/y.tab.h:7: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:10: parse error before `cval' ../../tools/wpp/y.tab.h:10: warning: type defaults to `int' in declaration of `cval' ../../tools/wpp/y.tab.h:10: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:11: parse error before `*' ../../tools/wpp/y.tab.h:11: warning: type defaults to `int' in declaration of `marg' ../../tools/wpp/y.tab.h:11: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:12: parse error before `*' ../../tools/wpp/y.tab.h:12: warning: type defaults to `int' in declaration of `mtext' ../../tools/wpp/y.tab.h:12: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:13: parse error before `}' ../../tools/wpp/y.tab.h:13: warning: type defaults to `int' in declaration of `YYSTYPE' ../../tools/wpp/y.tab.h:13: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:59: parse error before `pplval' ../../tools/wpp/y.tab.h:59: warning: type defaults to `int' in declaration of `pplval' ../../tools/wpp/y.tab.h:59: warning: data definition has no type or storage class header.c: In function `is_object': header.c:180: `tOBJECT' undeclared (first use in this function) header.c:180: (Each undeclared identifier is reported only once header.c:180: for each function it appears in.) header.c: In function `is_local': header.c:189: `tLOCAL' undeclared (first use in this function) header.c: In function `is_callas': header.c:198: `tCALLAS' undeclared (first use in this function) make[2]: *** [header.o] Error 1 make[2]: Leaving directory `/usr/src/wine/tools/widl' make[1]: *** [widl] Error 2 make[1]: Leaving directory `/usr/src/wine/tools' make: *** [tools] Error 2 I've done a make clean to no avail.

4 5

Warcraft 3 : success and woes
by Jean-Baptiste Note 20 Jul '02

20 Jul '02

Hello dear list, ** All the following has been teste on debian sid, XF4.0.2-17, latest wine CVS, on a Geforce2 with 2960 nvidia drivers. GL include were the standart mesa ones. system is pIII-smp, stock 2.4.18 kernel. ** I've followed with great interest a thread on wine-devel where Matthieu Foillard explained his problems trying to run warcraft3 under standard wine. I came across the same problem, so i though i could post here to explain what to do. This is really simple, and following Jesse Allen's recommendation found on http://www.winehq.com/hypermail/wine-devel/2002/07/0189.html The problem appears when you try to run warcraft 3 in opengl mode, regardless of whether or not you ran it with d3d and wineX previously. Warcraft is (following Jesse Allen's thought) trying to scan video modes available in OpenGL and gets stuck. However, after only one successful launch, the game creates the registry entries needed, and does not need to go through this detection cycle again. Question is, how to create those entries ? At your option * try to merge/use my user.reg attached below NOTE: i've still to look to the cd-key entry in my brother's win system to add it and be able to connect to battle.net =) You'll get into trouble certainly though, so read on. * try to do a minimal patch to do one successful run (warning, not very beautiful, we're not on wine-devel): You have to edit the function WINPOS_MinMaximize in the file wine/dlls/x11drv/winpos.c modify it so that it'll return SWP_NOSIZE | SWP_NOMOVE; anyway. compile & install, run. I dont know how this morbid modification affects other things. AFTER the successfull run, you can happily launch the game: launch it and relaunch it change resolution at your leasure BUT... If you do only one small change on window focusing... then it seems impossible for the game window to get the focus again on relaunch. All goes to the launching window ; i've tried with various window managers (kwin, pwm, blackbox) : same problem. So I thought : some information is written somewhere, that is not valid any more when i do a focus change. 1) could it be in user.reg/wine itself ? Deleting ~/.wine/user.reg will solve the problem. However, i've diffed two user.reg differently generated ; i'm at a loss to find any significant difference between the two. (the diff's attached) Furthermore, storing away user.reg and rm -Rf'ing ~/.wine, and copying back, with some focus change in between, leads to a non-focused game window. 2) could it be elsewhere ? IT IS ! As a matter of fact, building a fresh user.reg, then replacing it with an old saved one, without focus changes works flawlessly. I'm pretty sure something somewhere gets written with something like a window number in it. I'm pretty sure that's either in X itself or in the window manager. BTW, the results are the same wether i use wine in managed or unmanaged mode : the WM seems to be unaware of the created window. I don't know if I made myself clear ; i'd be glad to help you (*cough*) fix the bug for me, or (*cough* *cough*) give me some information/pointer as to how i could fix it. Regards, Jean-Baptiste Note

2 1

A windows clone without wine?
by Uwe Bonnes 20 Jul '02

20 Jul '02

Hallo, http://slashdot.org/articles/02/07/19/2116234.shtml?tid=99 talks about China developping a windows clone. I can't imagine they don't use wine as a base. Does anybody know more? Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

1 0

Re: PATCH: Convert HTASK to a void*
by Michael Stefaniuc 19 Jul '02

19 Jul '02

Hello, please disregard this patch, it has build problems in a "make clean" enviroment. An other problem is that WOWHandle32 and WOWHandle16 are needed in loader/task.c, but I suspect I'm not allowed to import wow32 into the ntdll? bye michael On Fri, Jul 19, 2002 at 01:07:16AM +0200, Michael Stefaniuc wrote: > this patch should close bug #502, but I have some questions (that's why > wine-devel is CC'ed): > - is it correct to use the HTASK_{16,32} macros or should I use > WOWHandle{16,32}? The difference is that the macros include a type > cast to the right handle. > - GetAppCompatFlags() works internaly with a HTASK16. Can I move the > implementation to GetAppCompatFlags16()? Would save a handle > conversion in GetAppCompatFlags16(). > > I'll close the bug report after the patch get's accepted. > > License: LGPL, X11 > Changelog: > Michael Stefaniuc <mstefani(a)redhat.com> > - Convert HTASK to a void* > - Fix HTASK_32 macro > > > bye > michael -- Michael Stefaniuc Tel.: +49-711-96437-199 System Administration Fax.: +49-711-96437-111 Red Hat GmbH Email: mstefani(a)redhat.com Hauptstaetterstr. 58 http://www.redhat.de/ D-70178 Stuttgart

1 1

Wine CVS does *not* compile anymore. [wine/tools/widl//header.c]
by Boris Reisig 19 Jul '02

19 Jul '02

Wine stopped compiling a fews days ago or maybe a week. I download the CVS every few days and I noticed that it cant compile anymore. Here make[1]: Entering directory `/root/wine/tools' make[2]: Entering directory `/root/wine/tools/wpp' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/root/wine/tools/wpp' make[2]: Entering directory `/root/wine/tools/widl' gcc -c -I. -I. -I../../include -I../../include -I../../tools/wpp -g -O2 -Wall -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o header.o header.c In file included from header.c:36: ../../tools/wpp/y.tab.h:10: parse error before `wrc_sll_t' ../../tools/wpp/y.tab.h:10: warning: no semicolon at end of struct or union ../../tools/wpp/y.tab.h:11: warning: type defaults to `int' in declaration of `ull' ../../tools/wpp/y.tab.h:11: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:14: parse error before `cval' ../../tools/wpp/y.tab.h:14: warning: type defaults to `int' in declaration of `cval' ../../tools/wpp/y.tab.h:14: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:15: parse error before `*' ../../tools/wpp/y.tab.h:15: warning: type defaults to `int' in declaration of `marg' ../../tools/wpp/y.tab.h:15: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:16: parse error before `*' ../../tools/wpp/y.tab.h:16: warning: type defaults to `int' in declaration of `mtext' ../../tools/wpp/y.tab.h:16: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:17: parse error before `}' ../../tools/wpp/y.tab.h:17: warning: type defaults to `int' in declaration of `yystype' ../../tools/wpp/y.tab.h:17: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:66: parse error before `pplval' ../../tools/wpp/y.tab.h:66: warning: type defaults to `int' in declaration of `pplval' ../../tools/wpp/y.tab.h:66: warning: data definition has no type or storage class header.c: In function `is_object': header.c:180: `tOBJECT' undeclared (first use in this function) header.c:180: (Each undeclared identifier is reported only once header.c:180: for each function it appears in.) header.c: In function `is_local': header.c:189: `tLOCAL' undeclared (first use in this function) header.c: In function `is_callas': header.c:198: `tCALLAS' undeclared (first use in this function) make[2]: *** [header.o] Error 1 make[2]: Leaving directory `/root/wine/tools/widl' make[1]: *** [widl] Error 2 make[1]: Leaving directory `/root/wine/tools'

1 0

AutoCAD2000 again and CreateFiber
by Max 19 Jul '02

19 Jul '02

Well, after the patch-hack-or whatever on VirtualQuery, AutoCAD2000 began coming alive ! Some problems yet, but one wonders me in particular : setting window version as win98 or winnt40, app shows an exception stating that CreateFiber function is not implemented; setting as win95 the apps starts quite well. Any idea ? Is there some plan to implement xxxxxFiber functions, or it's too difficult ? BTW, looking for help on the net, i haven't really understood the difference between a regular thread and a fiber (only caught that use of fibers instead of threads is somehow discouraged...) Regards Max

2 4

Problem with wcmd
by Steven Edwards 19 Jul '02

19 Jul '02

This patch http://cvs.winehq.com/patch.py?id=1025909276607367637873725 results in this under mingw with gcc 2.95.c and 3.1 gcc -c -I. -I. -I../../include -I../../include -D__MINGW__ -D_WINDOWS -DWINE_NO WINSOCK -Wall -mpreferred-stack-boundary=2 -DSTRICT -DNONAMELESSUNION -DNONAMELE SSSTRUCT -D_REENTRANT -o directory.o directory.c directory.c: In function `WCMD_filesize64': directory.c:369: `uint' undeclared (first use in this function) directory.c:369: (Each undeclared identifier is reported only once directory.c:369: for each function it appears in.) directory.c:369: parse error before `r' directory.c:374: `i' undeclared (first use in this function) directory.c:378: `r' undeclared (first use in this function) make: *** [directory.o] Error 1 Any ideas? Thanks Steven __________________________________________________ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com

1 0

Preliminary patch for Bug 675 - LVM_SCROLL
by Guy L. Albertelli 19 Jul '02

19 Jul '02

The attached patch implements LVM_SCROLL. While not many programs use it, implementing it required changing how scrollbars were handled for all of Listview. This new implementation is much more like the native. The scrollbars mimic the range of pixels that they cover. This allows the specification of a pixel level scroll which is critical to LVM_SCROLL. The only exception (and the native does this also) is for LVS_LIST displays where the scrollbar is related to the number of columns to be displayed. Before submitting to wine-patches, I am interested in feedback and any discrepancies with how the native controls work (-dll commctrl,comctl32=n). Thanks, Guy Albertelli <<galberte(a)neo.lrun.com>>

1 0

Re: wine/files dos_fs.c smb.c smb.h
by Rein Klazes 19 Jul '02

19 Jul '02

On Thu, 18 Jul 2002 22:17:19 -0500, you wrote: > > Log message: > Mike McCormack <mikem(a)codeweavers.com> > First go at reading directories on public SMB shares. > > Patch: http://cvs.winehq.com/patch.py?id=1027048639509081130455346 This breaks Forte Agent, looping endlessly around a FindNextFileA(). It is caused by the SetLastError(ERROR_NO_MORE_FILES) that is lost in the final HeapUnlock call. A quick fix is attached. files/ : dos_fs.c Repair SetLastError in FindNextFileA. Rein. -- Rein Klazes rklazes(a)xs4all.nl

1 0

Re: Errors running winapi_extract --stub-statistics
by Gregg Mattinson 19 Jul '02

19 Jul '02

I think this is because the module name is no longer in the .spec file. Lines 71-73 of winapi_extract look for "name" in the .spec file, which no longer exists. Should we be using the file name as the module name? Gregg Mattinson Co-op Developer Sun Microsystems of Canada >From: Francois Gouget <fgouget(a)free.fr> >To: wine-devel(a)winehq.com >cc: Patrik Stridvall <ps(a)leissner.se> >Subject: Errors running winapi_extract --stub-statistics >Date: Fri, 19 Jul 2002 00:19:15 -0700 (PDT) > > >Hi, > > >I was trying to update the API statistics but I got the following >errors: > >$ ./tools/winapi/winapi_extract --stub-statistics >Use of uninitialized value in hash element at >./tools/winapi/winapi_extract line 97. >Use of uninitialized value in hash element at >./tools/winapi/winapi_extract line 97. >... > >There is quite a few of these. So I tentatively modified the line as >follows: > $module2entries{$module} = $entries if (defined $module); > >But then I got: >$ ./tools/winapi/winapi_extract --stub-statistics >controls/button.c (file 1 of 796)Not a HASH reference at >tools/winapi_check/winapi_parser.pm line 32. > >So obviously there is another problem or my previous 'fix' was not so >good. Any ideas? > > >-- >Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ > In a world without fences who needs Gates? >

1 0

Errors running winapi_extract --stub-statistics
by Francois Gouget 19 Jul '02

19 Jul '02

Hi, I was trying to update the API statistics but I got the following errors: $ ./tools/winapi/winapi_extract --stub-statistics Use of uninitialized value in hash element at ./tools/winapi/winapi_extract line 97. Use of uninitialized value in hash element at ./tools/winapi/winapi_extract line 97. ... There is quite a few of these. So I tentatively modified the line as follows: $module2entries{$module} = $entries if (defined $module); But then I got: $ ./tools/winapi/winapi_extract --stub-statistics controls/button.c (file 1 of 796)Not a HASH reference at tools/winapi_check/winapi_parser.pm line 32. So obviously there is another problem or my previous 'fix' was not so good. Any ideas? -- Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ In a world without fences who needs Gates?

1 0

Re: AutoCAD2000 again and CreateFiber
by Eric Pouech 19 Jul '02

19 Jul '02

> Alle 21:40, giovedì 18 luglio 2002, Eric Pouech ha scritto: > > > TEB: Thread execution block... it's the descriptor of any running thread > > in the system (see include/thread.h) > > on NT, the TEB starts with a thread information block > > so if I did understand, in NT fibers are mapped to threads descriptors > directly.... not really... fibers descriptors are chained in a TEB so that the thread (which is the sole execution unit seen by the scheduler) can arrange its own scheduling of fibers A+ --------------- Eric Pouech (http://perso.wanadoo.fr/eric.pouech/) The future will be better tomorrow, Vice President Dan Quayle ------------------------------------------ Faites un voeu et puis Voila ! www.voila.fr

1 0

Re: Re: about XIM support on wine
by shaw 19 Jul '02

19 Jul '02

> > Hi, > > The best solution for the time being is to use Over-the-top entry, so > that characters you type are shown in a small child window rather than a > seperate window. > > If you're feeling keen, then you could try and interface XIM to > Microsoft's own input context stuff (see ImmGetContext in imm32.dll). > > Do you have any patches for us to try out? > > Mike > > rain shaw wrote: > > Hi all, > > I do apply some patches to the wine source according to some tips in > > bugs library,and I can input chinese in notepad now. > > But,every time window was created,will the input method popup.For > > example,if a message box popped up,the xim will popup as well. > > It seems that we called the XIM related Xlib function every time new > > window was created. > > Would u please give me some suggestions about how to disable create and > > open XIM while create non-text-input related window? in other word,how > > to determin the x-window that going to be created is a control that need > > input method ? > > Thanx! > > > > > Sorry,I'm newbie to Wine and Xlib, So I just add some following statemengs if(cs->lpszClass[0] == 'E' || (0 == strcmp(cs->lpszClass,"NotesRichText")) || (0 == strcmp(cs->lpszClass,"IRIS.tedit"))) { /*Yes,Just seek the first char*/ XIM_DoCreateIC(data->client_window); XIM_SetIC(display, data->client_window, data->whole_window); } yes,it looks really ugly but works. Now,I met the same question as message http://www.winehq.com/hypermail/wine-devel/2002/05/0043.html I try to add apparently mapping of WM_IME_CHAR and friends to/from unicode in windows/winproc.c. bug nothing happens. Any suggestions ?

1 0

Re: warcraft 3
by Jesse Allen 19 Jul '02

19 Jul '02

Hi, Here's how to get Warcraft 3 running under wine: 1. Use the latest wine cvs. Only that will work. 2. Mount the CD, and run install.exe on the CD with the winver set to win98 under config. (even though 95/98 are exactly the same when playing the game--i hate that) You should disable the ide-scsi thing because it seems to cause problems =( 3. Close the install program. Go to the directory where war3 is installed. mv the Movies folder to Movies backup. The game tries to display a movie clip on start in the retail, and it hangs wine =( 4. Download the NoCD patch for Warcraft 3 v1.00 (I don't know if 1.01 is out yet) at www.gamecopyworld.com. mv war3.exe and worldedit.exe to backup names. Copy in the patched program exe's. You may now run War3 if you wish. Warcraft 3 uses Safedisc v2. With this patch it will bypass it. Run war3 with the command "wine war3.exe -- -opengl". 5. To login battle.net, you need to bypass the exe check. With the patched version of the game, it won't work. So what I did to get it to work is moved the patched exe's to something like "war3_patched.exe" and create a symbolic link "war3.exe" that links to it. Start the game "war3.exe". To login to battle.net, open bash console. Change to the war3 directory, and reset the symbolic link to the original war3 exe, let it sleep 5 seconds, and then reset the symbolic link back to the patched version. While it's sleeping, you need to login into battle.net immediately. This is what I did to get D2 battle.net to work under wine. It should work for war3. You need to be the same version as battle.net for it to work though. (currently only 1.00 is availible for linux, and battle.net is 1.01) 6. To patch the game, you need to get the standalone patches. Set your symbolic link to the real exe's, and patch away =) The beta in contrast worked perfectly. The retail has a couple problems =(. The advantages I find running War3 under linux/wine/opengl, are higher framerates than on both real windows, and winex. And no graphics errors in comparison to winex d3d8, and no sound problems like under real windows. My three button mouse also works unlike windows. All these advantages =) Jesse

10 14

Re: OLE classes registration
by John K. Hohm 19 Jul '02

19 Jul '02

Andriy Palamarchuk <apa3a(a)yahoo.com> wrote: > --- Steven Edwards <steven_ed4153(a)yahoo.com> wrote: > > I dont know very much about ole or COM so if I am > > way > > wrong just flame me. =) > > > > Can the regsvr code from comcat be adapted for this? > > Rather then implementing more stuff in > > winedefaultreg > > can we make all of the OLE/COM stuff self-register? > > I > > think during on of my tests on windows with the wine > > dlls that was a problem I encountered and at least > > for > > comcat it is now fixed. > > Yes, as was discussed before this is the right way to > do it. Anyway, finding out what information to add and > and development of the dlls registering process are > pretty much independent from each other. I wrote the regsvr.[hc] in dlls/comcat with the intent of their being useful for other dlls' self-registration. It should be possible to copy regsvr.h and regsvr.c, tweak the implementations of DllRegisterServer and DllUnregisterServer, and write the appropriate regsvr structure definitions, and have made another dll self-registerable. I would be willing to do that myself for other dlls if those responsible for them ask nicely. :-) This reminds me that a self-registerable dll is supposed to have a VS_VERSION_INFO resource, with an empty "OLESelfRegister" value in the "StringFileInfo" block. comcat.dll has no resources; is there a standard Wine way to add such version info?

4 5

libwine problem when calling GetModuleHandle(null) from C# on linux
by Steinar Herland 19 Jul '02

19 Jul '02

I sent this post to comp.emulators.ms-windows.wine, but I'm hoping it's appropriate to send it to this list as well. My humble apologies if not. I have this very simple C# program compiled on linux using the lates mono (http://www.go-mono.com): ------- using System; using System.Runtime.InteropServices; class Win32Methods{ [DllImport("kernel32.dll")] public extern static IntPtr GetModuleHandleW(string lpModuleName); } class Class1 { [STAThread] static void Main(string[] args) { Console.WriteLine("GetModuleHandle(null): {0}", Win32Methods.GetModuleHandleW(null)); } } ------ When I run this on Windows (.NET) it prints out the module-handle. If I run it on linux using mono, I get: ------ err:heap:HEAP_GetPtr Invalid heap 00000000! GetModuleHandle(null): 0 ------ I have seen some old post suggesting that this error is due to opengl-build-problems, but i'm able to run notepad (the wine-version), which I assume call kernel32.GetModuleHandle as well. WineVersions tested: - wine-cvs-unstripped-071702-1.i386.rpm downloaded from http://wine.dataparty.no today - libwine version included on Mandrake 8.2. (Download Edition) I hope someone can help me with this, as I'm trying to use Wine to port the basics of the (Microsoft) System.Windows.Forms namespace in .NET to linux. Best Regards Steinar Herland

2 1

Possible Fix?
by Anthony Tuininga 19 Jul '02

19 Jul '02

I installed Dynomite for Windows (from PopCap) into a Wine-only installation and noticed that as I moved the window, the images and sprites were offset by the corresponding amount. I added a return statement into the following file (updated from CVS as of today) and the problem went away almost completely. On occasion repainting still can be problematic but overall things work much better. windows/winpos.c, in function WINPOS_GetWinOffset() I simply returned immediately following the line which sets the X and Y offsets to 0. Now I suspect that the rest of the code is rather necessary in some instances but in this particular case it is getting in the road. Any comments? Anthony

4 4

Re: solaris configure strangness
by Gregg Mattinson 18 Jul '02

18 Jul '02

This patch fixes the configure problems reported to wine-devel by Shachar Shemesh. I have only tested it on sparc/solaris. This patch must be applied after my __sparc__ not defined patch sent to wine-patches on July 17. License: LGPL/X11 Changelog: configure.ac configure - X11/extensions/shape.h requires X11/Xutil.h - X11/XKBlib.h requires X11/Xlib.h - net/if.h requires sys/socket.h - netinet/ip.h requires sys/socket.h and sys/in_systm.h - resolv.h requires sys/socket.h Gregg Mattinson Co-op Developer Sun Microsystems of Canada Index: configure =================================================================== RCS file: /opcom/comp/ws/wine/CVSROOT/wine/configure,v retrieving revision 1.2 diff -u -r1.2 configure --- /tmp/T0Oaaqpg Thu Jul 18 09:29:45 2002 +++ configure Thu Jul 18 09:20:30 2002 @@ -5945,22 +5945,16 @@ for ac_header in X11/XKBlib.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" -$ac_includes_default +#include <X11/Xlib.h> + #include <$ac_header> _ACEOF rm -f conftest.$ac_objext @@ -5975,77 +5969,16 @@ ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_header_compiler=yes + eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 -ac_header_compiler=no +eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -6117,7 +6050,6 @@ else { echo "$as_me:$LINENO: WARNING: Xkb extension not found, Wine will be built without it" >&5 echo "$as_me: WARNING: Xkb extension not found, Wine will be built without it" >&2;} - fi done @@ -6238,6 +6170,54 @@ +for ac_header in X11/Xutil.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include <X11/Xlib.h> + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + for ac_header in X11/extensions/shape.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` @@ -6250,6 +6230,9 @@ #line $LINENO "configure" #include "confdefs.h" #include <X11/Xlib.h> + #ifdef HAVE_X11_XUTIL_H + # include <X11/Xutil.h> + #endif #include <$ac_header> _ACEOF @@ -11339,9 +11345,6 @@ - - - for ac_header in \ arpa/inet.h \ arpa/nameser.h \ @@ -11361,15 +11364,12 @@ linux/param.h \ linux/serial.h \ linux/ucdrom.h \ - net/if.h \ netdb.h \ netinet/in.h \ netinet/in_systm.h \ - netinet/ip.h \ netinet/tcp.h \ pty.h \ pwd.h \ - resolv.h \ sched.h \ scsi/sg.h \ socket.h \ @@ -11580,6 +11580,159 @@ +for ac_header in net/if.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in netinet/ip.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif + #if HAVE_NETINET_IN_SYSTM_H + # include <netinet/in_systm.h> + #endif + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in resolv.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then Index: configure.ac =================================================================== RCS file: /opcom/comp/ws/wine/CVSROOT/wine/configure.ac,v retrieving revision 1.2 diff -u -r1.2 configure.ac --- /tmp/T01laOpg Thu Jul 18 09:29:45 2002 +++ configure.ac Thu Jul 18 09:19:16 2002 @@ -147,8 +147,8 @@ AC_DEFINE(HAVE_XKB, 1, [Define if you have the XKB extension]),, $X_LIBS -lXext -lX11 $X_EXTRA_LIBS) ], - AC_MSG_WARN([[Xkb extension not found, Wine will be built without it]]) - ) + AC_MSG_WARN([[Xkb extension not found, Wine will be built without it]]), + [#include <X11/Xlib.h>]) dnl *** Check for X Shm extension AC_CHECK_HEADERS(X11/extensions/XShm.h, @@ -160,6 +160,10 @@ AC_MSG_WARN([[XShm extension not found, Wine will be built without it]]), [#include <X11/Xlib.h>]) + dnl *** Check for Xutil + AC_CHECK_HEADERS(X11/Xutil.h,,, + [#include <X11/Xlib.h>]) + dnl *** Check for X shape extension AC_CHECK_HEADERS(X11/extensions/shape.h, [ dnl *** If X11/extensions/shape.h exists... @@ -168,7 +172,10 @@ $X_LIBS -lXext -lX11 $X_EXTRA_LIBS) ], AC_MSG_WARN([[XShape extension not found, Wine will be built without it]]), - [#include <X11/Xlib.h>]) + [#include <X11/Xlib.h> + #ifdef HAVE_X11_XUTIL_H + # include <X11/Xutil.h> + #endif]) dnl *** Check for XFree86 DGA / DGA 2.0 extension AC_CHECK_HEADERS(X11/extensions/xf86dga.h, @@ -911,15 +932,12 @@ linux/param.h \ linux/serial.h \ linux/ucdrom.h \ - net/if.h \ netdb.h \ netinet/in.h \ netinet/in_systm.h \ - netinet/ip.h \ netinet/tcp.h \ pty.h \ pwd.h \ - resolv.h \ sched.h \ scsi/sg.h \ socket.h \ @@ -963,6 +981,27 @@ ) AC_HEADER_STAT() +dnl *** Check for net/if.h +AC_CHECK_HEADERS(net/if.h,,, + [#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif]) + +dnl *** Check for netinet/ip.h +AC_CHECK_HEADERS(netinet/ip.h,,, + [#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif + #if HAVE_NETINET_IN_SYSTM_H + # include <netinet/in_systm.h> + #endif]) + +dnl *** Check for resolv.h +AC_CHECK_HEADERS(resolv.h,,, + [#if HAVE_SYS_SOCKET_H + # include <sys/socket.h> + #endif]) + dnl **** Check for types **** AC_C_CONST

2 1

Virtual Pages difference - Spotted with VirtualQuery()
by Max 18 Jul '02

18 Jul '02

As usual, AutoCAD seems to be a good test-bench for wine :-) I spotted the problem that seemed coming from VirtualQuety function, but that is (I guess... hmmmm) more a problem of memory handling in wine. I made a little test app; here the results in wine and win2k, later on the app itself : WINE RESULTS : Memory info about '004012F0' : Base Address : 00401000 Allocation Base : 00400000 Allocation Protect : PAGE_READONLY | PAGE_WRITECOPY | PAGE_EXECUTE_READWRITE | PAGE_NOACCESS Region Size : 00017000 State : MEM_COMMIT Protect : PAGE_WRITECOPY <----- HERE Type : MEM_PRIVATE WIN2k RESULTS : Memory info about '004012F0' : Base Address : 00401000 Allocation Base : 00400000 Allocation Protect : PAGE_EXECUTE_WRITECOPY Region Size : 00001000 State : MEM_COMMIT Protect : PAGE_EXECUTE_READ <---- AND HERE Type : MEM_IMAGE Well, dunno too much about Type field, I didn't find an app that check it yet; I did find the app that uses Protect flag; I think it's poor coded, but as usual we should make bad apps work too :-) The app put some data in code page, not yet spotted if hard or soft-coded, then before reading it checks Protect field to see if it has not set the PAGE_GUARD, NO_ACCESS and WRITECOPY flags; if t has, it hangs some 10.000 lines later (sigh....) I think wine should set Protect flag quite as like as possible as windoze For AutoCAD2000 I put a dirty hack in process.c, but is really ugly; i'd prefer not to put my hands (bytes ?) too deeply inside some code that I don't understand completely... Attached is the test source (compiled in Borland CBuilder, but should work with any compiler, apart some unuseful pragma's). If needed I can post the compiled too :-) Regards Max

4 3

Re: solaris configure strangness
by Gregg Mattinson 18 Jul '02

18 Jul '02

I have some spare time, so I'll see what I can get done today. I will only be able to test on Solaris, so someone will need to test my patch on Linux. Gregg Mattinson Co-op Developer Sun Microsystems of Canada >From: Shachar Shemesh <wine-devel(a)sun.consumer.org.il> >To: Francois Gouget <fgouget(a)free.fr> >CC: wine-devel(a)winehq.org >Subject: Re: solaris configure strangness >Date: Thu, 18 Jul 2002 09:09:07 +0300 > > >Francois Gouget wrote: > >>So to have a clean configure, the above header must be moved out of the >>big AC_CHECK_HEADERS and into their individual checks where we can >>specifically test for these dependencies. See for instance XShm.h (only >>a vague quide). >> >> >I'll try, but I only have solaris machines at work, and this is far from >my main focus on Wine (I'm working on BiDi, if you remeber correctly >;-). I am only looking into solaris at all because at work we use some >windows compat library for solaris (don't remeber the name, but it >wasn't mainsoft's) for the GUI part of the product. I am sprinkling the >idea to the Unix GUI team here to check Wine out. > >The response so far has been moderetely positive. (using those compat >libraries incures a non-trivial per-seat license that goes to MS, as >well as horrible support. They have been complaining that response time >on one incident was ONE YEAR!!!! and the idea of having the sources to >the library itself were appealing to them). The main problem was that it >would take over two days of effort just looking into it, and they cannot >spare the time. > >I just D/L the CVS to see what it would take. I am also not an autoconf >expert. If I have more spare time at work, I will have a look at that. >If not, I'd rather spend my Wine dev time trying to figure out how the >fr1661n6 h377 one is supposed to go about implementing the humoungous >monster that is GetCharacterPlacement without creating a 500 lines function. > > Shachar

1 0

Windows emulator for Linux - here WINE again
by Oliver Ob 18 Jul '02

18 Jul '02

> > Hi All & Austin, > > who typed.... > > It has been a while since I have tried WINE. Tell me/us, what games you > are running & what tweaks yall made-if any? I would like to run these applications which I have so far not found in the wine homepage to be supported: Rebirth 1.0 audio application, audio runs GOOD, but screen addressment Rebirth 2.01 audio application, audio runs GOOD, but screen addressment VGA Planets Winplan 3.5 front screen loads, but cannot play game Planets 4 front screen loads, but cannot play game Incubation (Battle Isle 4) title loads, but no sound 688i Hunter Killer title loads from cd, but gets stuck on front screen, no sound My versions are all registered and original so that is not sort of a shareware restriction, but a problem of tweak options for wine. i also stand in front of a wall when it comes to that the audio WORKS for the sound applications, but does not for the games. WONDER BIG TIME. Hello Austin!! I am currently trying out Wine as well. The programs I use (Rebirth and VGA Planets/Winplan) do work in part, but sort of problem lies in the SCREEN ADDRESSING. how should I twiddle that? example: appearance of NTpassword is under native windoze: user1 password1 info1 user2 password2 info2 user3 password3 info3 user4 password4 info4 user5 password5 info5 but under wine it is mixed up, sort of like this: user5 password2 info1 user1 password3 info2 user2 password4 info3 user3 password5 info4 user4 password1 info5 how can i fix that? it appears to be not a program, but a wine error. hope we can work this out together! -- *º¤., ¸¸,.¤º*¨¨¨*¤ =Oliver@home= *º¤., ¸¸,.¤º*¨¨*¤ I http://www.bmw-roadster.de/Friends/Olli/olli.html I I http://www.bmw-roadster.de/Friends/friends.html I I http://groups.yahoo.com/group/VGAP-93 I I http://home.t-online.de/home/spacecraft.portal I >>> Telek0ma iBBMS - soon back online +49.4503.TRSi1/TRSi2 <<<

1 0

solaris configure strangness
by Shachar Shemesh 18 Jul '02

18 Jul '02

Hi list. Due to seeing other people looking at it, I decided to try and compile WINE on solaris 2.8 sparc. During configure I get the following messages: checking for ar... ar configure: WARNING: X11/XKBlib.h: present but cannot be compiled configure: WARNING: X11/XKBlib.h: check for missing prerequisite headers? configure: WARNING: X11/XKBlib.h: proceeding with the preprocessor's result configure: WARNING: XShape extension not found, Wine will be built without it configure: WARNING: DGA extension not found, Wine will be built without it configure: WARNING: XFree86 VMODE extension not found, Wine will be built without it configure: WARNING: XVideo extension not found, Wine will be built without it configure: WARNING: net/if.h: present but cannot be compiled configure: WARNING: net/if.h: check for missing prerequisite headers? configure: WARNING: net/if.h: proceeding with the preprocessor's result configure: WARNING: netinet/ip.h: present but cannot be compiled configure: WARNING: netinet/ip.h: check for missing prerequisite headers? configure: WARNING: netinet/ip.h: proceeding with the preprocessor's result configure: WARNING: resolv.h: present but cannot be compiled configure: WARNING: resolv.h: check for missing prerequisite headers? configure: WARNING: resolv.h: proceeding with the preprocessor's result ... However, when finally done: checking X11/XKBlib.h usability... no checking X11/XKBlib.h presence... yes checking for X11/XKBlib.h... yes checking net/if.h usability... no checking net/if.h presence... yes checking for net/if.h... yes checking netinet/ip.h usability... no checking netinet/ip.h presence... yes checking for netinet/ip.h... yes checking resolv.h usability... no checking resolv.h presence... yes checking for resolv.h... yes Can anyone explain what this means? Shachar

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel