wine-devel

wine-devel@winehq.org

9 participants
84458 discussions

Re: FreeType autoconf checks
by Alexandre Julliard 05 Jun '01

05 Jun '01

Ian Pilcher <ian.pilcher(a)home.com> writes: > CPPFLAGS works. Where the heck is that documented? (I can't find it in > the info pages for gcc or cpp.) It's not a gcc option, it's a configure internal variable (from $ac_cpp definition). This is the whole point: it will work independently of the compiler, or at least break the same way during configure and during the compile, which is what we want. -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: PATCH: set_thread_buffer fixed
by lawson_whitney＠juno.com 05 Jun '01

05 Jun '01

On Sun, 3 Jun 2001, Marcus Meissner wrote: > Is this the case where set_thread_buffer fails or not? > Okay, it is not. It crashes in debug_printf or dump_exports (pe_image.c). However, it is so too a glibc-2.1.3 problem. I think. Sort of. The same Wine that crashes with kernel 2.4.4 and 2.4.5 works fine with kernel 2.2.14, and I bet later 2.2.x kernels when (if) I get around to building them. I think I might not be smart enough to debug it in detail. Maybe I should just send www4mail after glibc-2.2 instead. > I don't see a failure message here. > > Also, could you try to run the attached test program and see if it fails? success with either kernel version. Hmmm, do I have 2.0.30 still lying around? 1.3.18? > > Ciao, Marcus > Lawson Constants aren't, and variables won't. ---cut--- ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj.

1 0

Re: FreeType autoconf checks
by Alexandre Julliard 04 Jun '01

04 Jun '01

Ian Pilcher <ian.pilcher(a)home.com> writes: > One thing to keep in mind, however. The FreeType headers themselves > use relative paths to include one another, so this is an issue that > we're not going to be able to completely eliminate. This is why I > had to mess around with the C_INCLUDE_PATH variable; AC_CHECK_HEADER > tries to preprocess the header file, so it has to be able to find any > subsidiary headers. (Is this what you mean by finding a way to check > that #include <freetype/freetype.h> works?) Yes; we should be using only relative paths in AC_CHECK_HEADER, since this is what we will use in the code. I don't think C_INCLUDE_PATH is portable either. Did you try setting CPPFLAGS instead? -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: FreeType autoconf checks
by Ian Pilcher 04 Jun '01

04 Jun '01

Alexandre Julliard wrote: > > Well, I don't like it much, but I haven't had time to look into a > better solution yet. Basically I think it's dangerous to check for the > file name with an absolute path and then include it with a relative > path, since there is no guarantee we'll get the same file. I think we > should really find a way to check that #include <freetype/freetype.h> > works given the right C flags. Also I'm not sure about the portability > of the ${FREETYPEINCL#-I} construct. > I see your point. Now that I think about it, I probably would have been bitten by it if anyone will. I run Red Hat 7.1 which has: /usr/include/freetype/freetype.h (from FreeType 1.x) /usr/include/freetype2/freetype/freetype.h (from FreeType 2.x) I just checked the gcc documentation, and directories specified with '-I' options on the command line are checked first. I have no idea, however, if other compilers behave in a similar manner. Using absolute paths for the FreeType headers would be non-trivial, but probably doable. We would have to use autoconf to define macros that include the complete path name of the headers we want to include; then #include those macros instead of the file names. Somehow, I don't think you're going to want to do that. One thing to keep in mind, however. The FreeType headers themselves use relative paths to include one another, so this is an issue that we're not going to be able to completely eliminate. This is why I had to mess around with the C_INCLUDE_PATH variable; AC_CHECK_HEADER tries to preprocess the header file, so it has to be able to find any subsidiary headers. (Is this what you mean by finding a way to check that #include <freetype/freetype.h> works?) I also had the same thought about the ${FREETYPEINCL#-I} construct. According to http://www.opengroup.org/onlinepubs/7908799/xcu/chap2.html#tag_001_006_002 it seems to be OK. Frankly, I share your distaste for this whole mess. -- ======================================================================== Ian Pilcher ian.pilcher(a)home.com ========================================================================

1 0

Re: fixup bogus SetLastError()
by Alexandre Julliard 04 Jun '01

04 Jun '01

Andreas Mohr <a.mohr(a)mailto.de> writes: > objects/gdiobj.c really has no business dealing with SetLastError(). > SetLastError() is a mechanism to communicate errors to external programs, > so it should definitely not be used for highly internal functions. You didn't include the gdiobj.c patch, but I disagree with it anyway... There can be many good reasons for setting last error in internal functions; for instance setting it inside GDI_GetObjPtr avoids having to set it in every single caller. And in the very rare case where this is not what we want, the caller can always set it to another value. -- Alexandre Julliard julliard(a)winehq.com

3 2

stack limit
by Stephen Crowley 04 Jun '01

04 Jun '01

What is the correct way to increase the default stack size for winelib applications? Also, are there any drawbacks to making the value fairly large? -- Stephen Crowley Software Engineer Placemark Investments 972.404.8100 x28

2 1

Re: stack limit
by Alexandre Julliard 04 Jun '01

04 Jun '01

Stephen Crowley <stephenc(a)placemark.com> writes: > What is the proper way to increase the stack size for winelib > applications? There seems to be a limit of around 2^20 bytes right now. There is no way to do this at the moment; but it shouldn't be too hard to add support for a 'stack' statement in the application spec file. -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: fixup bogus SetLastError()
by Alexandre Julliard 04 Jun '01

04 Jun '01

520053692817-0001(a)t-online.de (Andreas Mohr) writes: > Now that's where I disagree ! > The caller can *not* always set it to another value. > If it does and the program intends to read the LastError of a *previously* > executed API that failed, then the LastError will be reset even though > it shouldn't have been ! Then the caller needs to save/restore it across the GDI_GetObjPtr call. That's trivial to do. > In short: the SetLastError behaviour needs to match Windows behaviour very, > very closely. Definitely; but it's not clear to me that not setting last error is anywhere closer to Windows than setting it to INVALID_HANDLE. GDI_GetObjPtr should do what most callers need, and IMO this means setting it. I may be wrong, I haven't checked the error returns of all GDI functions (and of course this is nowhere documented). > This would be SelectObject() in this case, BTW. Which case? Do you have evidence that a SelectObject() with an invalid handle must not set last error? If so then of course it needs fixing. -- Alexandre Julliard julliard(a)winehq.com

2 1

stack limit
by Stephen Crowley 04 Jun '01

04 Jun '01

What is the proper way to increase the stack size for winelib applications? There seems to be a limit of around 2^20 bytes right now. -- Stephen Crowley Software Engineer Placemark Investments 972.404.8100 x28

1 0

tan not exported by msvcrt, ntdll
by Francois Gouget 04 Jun '01

04 Jun '01

I tried compiling Winelib applications without '-lm' (btw, the comment in configure.in is incorrect, it concerns Linux too, not just BeOS). But I had undefined symbol errors for applications that use tan and a couple other math functions. The reason is that both ntdll and msvcrt declare them with '-noimport': * msvcrt.spec: @ forward -noimport tan ntdll.tan * ntdll.spec: @ cdecl -noimport tan(double) tan So a Winelib application that imports msvcrt and ntdll does not get tan and thus must link with libm in the Unix sense. sin, cos and most others were ok though! Changelog: * dlls/msvcrt/msvcrt.spec Remove some '-noimport' for math functions -- Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ 1 + e ^ ( i * pi ) = 0

1 0

AnimateWindow() calls SetWindowPos() on a timer???
by Bobby Bingham 04 Jun '01

04 Jun '01

Forgot a detail ... Every time it send the messages it tells it not to move, size, redraw, activate, or change z-order. I could see the reason for these if if didn't tell it not to do anything, but ... ?? Bobby Bingham uhmmmm(a)ameritech.net

1 0

AnimateWindow() calls SetWindowPos() on a timer???
by Bobby Bingham 04 Jun '01

04 Jun '01

I am implementing AnimateWindow(), and I recorded all the messages win98 sent to my window when I called AnimateWindow(). It send a lot of groups of WM_WINDOWPOSCHANGING, WM_NCCALCSIZE, and WM_WINDOWPOSCHANGED. The number of times it sends these seems to correspond to how long I tell it to make the animation, almost as if it were on a timer. It looks like it calls SetWindowPos() on the window a lot, but I don't see why they would do this. Does anyone know?? I can supply my test app once I clean it up a little. Bobby Bingham uhmmmm(a)ameritech.net

1 0

off topic: Windows 98 and binutils
by Brian Craft 03 Jun '01

03 Jun '01

Hey -- Sorry for the OT post, but I suspect someone here will know the answer to this. I'm trying to objdump some Windows 98 device drivers & dlls. Last time I did something like this it was user-mode code from 95 or NT (not sure which), and I just configured binutils for i386-pe. Only this same configuration won't read the Windows 98 files -- it says the file format isn't recognised. I can still read the old Windows binaries with this config. I also tried i386-msdos, for good measure. What's the scoop? 98 has a new format? Is there a binutils target that will do the job? b.c.

2 1

Re: PATCH: set_thread_buffer fixed
by Gerard Patel 03 Jun '01

03 Jun '01

At 07:19 PM 02/06/2001 +0200, you wrote: <snip> >I have now changed config.h to only enable 64bit support for glibc 2.2 >or better. After applying your patch to current cvs, rm config.cache, ./configure, make depend && make Wine crashes as before. Did you leave something to for Alexandre Julliard implicit (he certainly knows about this stuff, I don't) ? I don't understand why _FILE_OFFSET_BITS is still defined in config.h.in. Gerard

3 2

Re: PATCH: set_thread_buffer fixed
by Alexandre Julliard 03 Jun '01

03 Jun '01

Marcus Meissner <marcus(a)jet.franken.de> writes: > Enable 64bit file operations on Linux only for glibc 2.2 or better, > since mmap64 is broken on glibc 2.1. It would be much better to do a configure check. Including features.h from config.h is very ugly IMO (not to mention that mmap64 seems to work fine on my glibc 2.1.3...) -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: PATCH: set_thread_buffer fixed
by Ove Kaaven 03 Jun '01

03 Jun '01

On Sat, 2 Jun 2001, Marcus Meissner wrote: > -/* This is for glibc on Linux, it will turn on 64 bit file support at compile time */ > -#define _FILE_OFFSET_BITS 64 > +#include <features.h> > +/* This is for glibc on Linux, it will turn on 64 bit file support at > + * compile time > + * Since glibc 2.1.x has various degrees of broken mmap64 prototypes, > + * we do not use this on glibc 2.1.x systems. > + */ > +#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ > 1) > +# define _FILE_OFFSET_BITS 64 > +#endif > + That's probably not going to work. The features.h is the only header that checks whether _FILE_OFFSET_BITS is defined, and it's protected against multiple inclusion, so _FILE_OFFSET_BITS must be defined *before* you include features.h. If you must check version, use autoconf.

1 0

Re: set_thread_buffer (fwd)
by lawson_whitney＠juno.com 02 Jun '01

02 Jun '01

This seems to have bounced once. Hope winehq feels better soon. On Fri, 1 Jun 2001 =?iso-8859-1?Q?G=E9rard_Patel_=3Cgerard.patel=40nerim.net=3E?=(a)tourian.nerim.net wrote: > Just what I have. > > if you verify if you have the same problem as myself, with current cvs > remove the line defining _FILE_OFFSET_BITS. This fixes it for me. > > Gerard > By this I understood to rip #define _FILE_OFFSET_BITS 64 out of config.h (and acconfig.h just to be sure) and rerun make. It recompiles nearly everything, of course, and makes a wine that will run my app again, so I guess it is the same problem. Now, what is the problem? :-/ glibc-2.1.3 - from Mandrake 7.2 - ?? - I am fairly sure I haven't munged any headers myself.. but Mandrake might have. Are <linux/ and <asm/ considered glibc headers? I don't see them in the rpm, but some motorist broke both my legs a while ago and it is too tough to change the CD and see what is in Slackware's glibc-2.1.2. I guess that wouldn't be conclusive anyway. gcc-2.95.2 locally built, with genuine strength-reduce bug. kernel 2.4.4 with devfs? Other? Feels to me like an inconsistancy between headers and library -? Lawson ---cut--- ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj.

1 0

Re:AnimateWindow() constants?
by Eric Pouech 02 Jun '01

02 Jun '01

> I am about to implement the AnimateWindow() function, but I don't have up to > date windows headers. I did some trial and error on a win98 box and came up > with what I think are the correct values, but could somebody check? all correct A+ --------------- Eric Pouech (http://perso.wanadoo.fr/eric.pouech/) The future will be better tomorrow, Vice President Dan Quayle __________________________________________________ Voila vous propose une boite aux lettres gratuite sur Voila Mail: http://mail.voila.fr

1 0

wine-users down?
by Francois Gouget 02 Jun '01

02 Jun '01

Hi, I didn't receive any message on wine-users since May 30th. Is the mailing list down or is it a problem on my end? There's been many messages since then on the newsgroup. Btw, why is the link to the wine-users archive disabled on WineHQ? (http://www.winehq.com/dev.shtml#ml) I found wine-users archives via Google: http://www.winehq.com/hypermail/wine-users/ And I see in the mailing list archives that there's no message since May 30th either. Looks like a mailing list problem to me... Last question (for this email...): Why do the mailing list archives point to the Integrita archives rather than the WineHQ archives? Is there an advantage of one over the other? -- Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ I haven't lost my mind, it's backed up on tape around here somewhere...

2 1

AnimateWindow() constants?
by Bobby Bingham 02 Jun '01

02 Jun '01

I am about to implement the AnimateWindow() function, but I don't have up to date windows headers. I did some trial and error on a win98 box and came up with what I think are the correct values, but could somebody check? AW_SLIDE 0x00040000 AW_ACTIVATE 0x00020000 AW_BLEND 0x00080000 AW_HIDE 0x00010000 AW_CENTER 0x00000010 AW_HOR_POSITIVE 0x00000001 AW_HOR_NEGATIVE 0x00000002 AW_VER_POSITIVE 0x00000004 AW_VER_NEGATIVE 0x00000008 I'm pretty sure about all of them except AW_BLEND because win98 doesn't implement it. Thanks in advance Bobby Bingham uhmmmm(a)ameritech.net

1 0

Finding (or not) the exact number of args
by Gaël de Chalendar 01 Jun '01

01 Jun '01

Hi, I'm trying to implement stubs for some missing ordinal functions in shlwapi. Reading the NOTES comment in dlls/shlwapi/ordinal.c I don't know if it is a good idea, but it allows explorer.exe (Win 98) to show its desktop and it is what I'm testing (just for fun. I do not hope to be able to use it right now). Anyway, it uses at a moment or another unimplemented ordinal functions. To implement their stubs, I begins with a lot of args, reducing this number until the function is passed. It seems to work but I wonder if I do not add only problems with this strategy. If I left the stack in a corrupted state, maybe the problem will become visible a lot later... I was not able to find in docs, mails archives or google groups any useful tip to find (simply) the right number of args. Particularly, the URL http://www.ece.cmu.edu/afs/ece/usr/dacut/www/src is dead. So, do I continue ? If yes, in this way or differently ? Thanks for your advices. Gael. PS: I will not read my mail until monday 28.

3 4

Re: critical section blocking
by Duane Clark 01 Jun '01

01 Jun '01

Aric Stewart wrote: > > Working with QuickTime5 I found a situation where mouse messages could > lockup wine. This leaving and entering the critical section resolves > that bug. > > -aric > > ------------------------------------------------------------------------ > Index: windows/message.c > =================================================================== > RCS file: /home/wine/wine/windows/message.c,v With this patch, Myst locks up solid as soon as the mouse is moved into the Myst window. Without it, Myst works fine. Duane

3 2

Can MAPI be directed to sendmail from a Windows app on Wine ?
by Steve Ball 01 Jun '01

01 Jun '01

I am running a windows voicemail server under wine and it runs extremely well, but I believe there is no MAPI support in Wine, and the voicemail server complains that there is no MAPI provider. I would not want to install a Windows email client even if I thought I could use MAPI, and would much prefer to use sendmail as the MAPI sender. I don't think it would be difficult to write code that would produce a sendmail mail message from a Wine stub, but I cannot find where the MAPI support goes and I know very little about MAPI under Windows, since I have done very little Windows programming. Has anyone done this before, or could anyone direct me to the hooks in Wine, and preferably some information on how MAPI works in Windows apps. The Wine project is a fantastic achievement, I hope that I can give something back. Steve Ball

1 0

Re: wineps include fix.
by Ian Pilcher 01 Jun '01

01 Jun '01

David Hammerton wrote: > > hi, seems you have done some updating on it.. but now it still doesnt compile, > im not sure if your trying to include something that is defined elsewhere or > you made a typo, but it seems to bawk on: > > gcc -c -I. -I. -I../../include -I../../include -I/usr/include/freetype2 -g -O2 > -Wall -mpreferred-stack-boundary=2 -fPIC -D__WINE__ -D_REENTRANT > -I/usr/X11R6/include -o truetype.o truetype.c > truetype.c:13: `#include' expects "FILENAME" or <FILENAME> > truetype.c:14: `#include' expects "FILENAME" or <FILENAME> > I give up. You're getting the error because FreeType's macros are not being defined by your include files. This is supposed to be the way to work around the fact that the FreeType guys rename their include files with every minor release. freetype/freetype.h should either define the macros or include another file that does so. If you can figure out why that isn't happening, let me know. -- ======================================================================== Ian Pilcher ian.pilcher(a)home.com ========================================================================

5 9

Re: WINE server messages
by Alexandre Julliard 01 Jun '01

01 Jun '01

David Howells <dhowells(a)redhat.com> writes: > Actually, I see that you do maintain a view list in the client as well as the > module list and section lists in the server. What I was thinking of was just > consolidating the three into a single view list and a single section list in > the server. > > In effect, Wine'd still have the module list, it's just that there'd be > non-modules in the list too. I still don't see why you want that. The fact that the section list is in the client or in the server is orthogonal to the fact that we maintain a list of modules. If you have a list of mapped views in the server you can simplify the module list a bit by making each module point to the view instead of the backing file, but you still need a module list to send debugger events and do toolhelp snapshots. You could of course hide the module list inside the section list by adding some magic flags to the section descriptor, but all it changes is that you then need to walk the whole section list to retrieve the modules; I don't really see the point. -- Alexandre Julliard julliard(a)winehq.com

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel