- wine-devel - winehq.org

Re: [PATCH] msvcp90: Update exception RTTI data to reflect it's part of std namespace
by Piotr Caban 13 Apr '17

13 Apr '17

Hi, On 04/12/17 23:32, Daniel Lehman wrote: > -#ifdef _MSVCIRT > +#if defined(_MSVCIRT) || (_MSVCP_VER >= 80) I think that this condition should be following: #if _MSVCP_VER >= 80 ... AVexception@std #else ... AVexception Thanks, Piotr

1 0

Re: [v2 PATCH] odbccp32: Handle ODBC_CONFIG_DRIVER request in SQLConfigDriver/W
by Marvin 13 Apr '17

13 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30163 Your paranoid android. === wxppro (32 bit misc) === 0a20:misc: unhandled exception c0000005 at 5FE8DFF9

1 0

Re: [PATCH 2/3] mshtml/tests: Added IMarshal and IManagedObject QueryInterface tests.
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30156 Your paranoid android. === w7u (32 bit htmldoc) === htmldoc.c:2671: Test failed: unexpected call GetOverrideKeyPath

1 0

Re: [PATCH 2/3] regedit: Validate REG_SZ import data before processing it any further
by Alexandre Julliard 12 Apr '17

12 Apr '17

Hugh McMaster <hugh.mcmaster(a)outlook.com> writes: > @@ -390,6 +390,25 @@ static const WCHAR *reg_type_to_wchar(DWORD type) > return NULL; > } > > +static BOOL validate_reg_sz_data(WCHAR *str) > +{ > + WCHAR *p, *end; > + > + if (!*str || !(p = strchrW(str, '"'))) > + return FALSE; > + > + while (*p && *(p - 1) == '\\') > + p = strchrW(++p, '"'); The backslash could have been escaped, you have to check the whole string. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/5] d3d9/tests: Relax the partially initialized varyings test (v2).
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30147 Your paranoid android. === w1064 (64 bit visual) === visual.c:7944: Test failed: Input test: Quad 3(2crd-wrongidx) returned color 0x00ff00ff, expected 0x00ff0080

1 0

Re: [PATCH 5/5] d3d9/tests: Fix stream_test cases which do not use stream 0.
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30146 Your paranoid android. === w8 (32 bit visual) === visual.c:7992: Test failed: Got unexpected color 0x00ff0000 for quad 2 (different colors).

1 0

Re: [PATCH 1/5] d3d9/tests: Relax the partially initialized varyings test.
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30142 Your paranoid android. === w8 (32 bit visual) === visual.c:7928: Test failed: Input test: Quad 3(2crd-wrongidx) returned color 0x00ff00ff, expected 0x00ff0080

1 0

Re: [1/2] winhttp/tests: Test when large amount of data is returned from a 401.
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30140 Your paranoid android. === wxppro (32 bit winhttp) === winhttp.c:1143: Test failed: request failed unexpectedly 400

2 1

Re: [2/2] winhttp: Always drain content before sending the next request.
by Marvin 12 Apr '17

12 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30141 Your paranoid android. === w2003std (32 bit winhttp) === winhttp.c:1143: Test failed: request failed unexpectedly 400

1 0

Re: [PATCH] winhttp/tests: Test when large amount of data is returned from a 410
by Marvin 11 Apr '17

11 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30136 Your paranoid android. === wvistau64 (32 bit winhttp) === winhttp.c:1143: Test failed: request failed unexpectedly 400 === w2008s64 (64 bit winhttp) === winhttp.c:1143: Test failed: request failed unexpectedly 400

1 0

Re: [PATCH 2/5] wined3d: Send texture dirty region updates through the command stream.
by Józef Kucia 11 Apr '17

11 Apr '17

On Tue, Apr 11, 2017 at 11:24 PM, Henri Verbeet <hverbeet(a)codeweavers.com> wrote: > - context = context_acquire(texture->resource.device, NULL, 0); > - sub_resource_idx = layer * texture->level_count; > - for (i = 0; i < texture->level_count; ++i, ++sub_resource_idx) > - { > - if (!wined3d_texture_load_location(texture, sub_resource_idx, context, texture->resource.map_binding)) > - { > - ERR("Failed to load location %s.\n", wined3d_debug_location(texture->resource.map_binding)); > - context_release(context); > - return E_OUTOFMEMORY; > - } > - wined3d_texture_invalidate_location(texture, sub_resource_idx, ~texture->resource.map_binding); > - } > - context_release(context); > + wined3d_cs_emit_add_dirty_texture_region(texture->resource.device->cs, texture, layer * texture->level_count); I think that just "layer" should be passed as the last argument to wined3d_cs_emit_add_dirty_texture_region().

1 0

Re: [PATCH v2] mountmgr: Create registry entries for serial ports.
by Alexandre Julliard 11 Apr '17

11 Apr '17

Alex Henrie <alexhenrie24(a)gmail.com> writes: > @@ -453,7 +457,21 @@ NTSTATUS WINAPI DriverEntry( DRIVER_OBJECT *driver, UNICODE_STRING *path ) > RegCloseKey( hkey ); > if (!RegCreateKeyExW( devicemap_key, serialW, 0, NULL, REG_OPTION_VOLATILE, > KEY_ALL_ACCESS, NULL, &hkey, NULL )) > + { > + /* create a registry entry for each serial port */ > + for (i = 1; i <= 256; i++) > + { > + sprintfW( pathW, comW, i ); > + serial_device = CreateFileW( pathW, 0, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL ); > + if (serial_device == INVALID_HANDLE_VALUE) > + break; > + > + CloseHandle( serial_device ); > + RegSetValueExW( hkey, pathW + 4, 0, REG_SZ, (BYTE *)(pathW + 4), > + (strlenW( pathW + 4 ) + 1) * sizeof(WCHAR) ); The registry key name is supposed to be the NT device. Ideally, what you'd want is to actually create the NT device pointing it to the corresponding Unix device, as well as the DOS symlink. If you do this, CreateFile can then use the normal path, and the ntdll serial device detection logic can be moved to mountmgr. -- Alexandre Julliard julliard(a)winehq.org

1 0

Putting in place traffic shaping on winehq
by Jeremy White 11 Apr '17

11 Apr '17

Hey folks, We've been getting nailed with peak charges on the traffic coming from the WineHQ web server. We think a large reason for this is that we were not sophisticated in how we flushed the fastly cache, so we'd get slammed in a big rush when we flushed. I believe that Jeremy Newman has fixed that now, so hopefully it won't happen again. But those overcharges are brutal (i.e. thousands of dollars) :-(. So I'm planning to put in place some traffic shaping to provide a hard upper limit for winehq (I'm going to impose 8Mbit; we currently pay for 10Mbpit committed; if I up that to 20, I may expand that). This should not disrupt anything, but I thought I'd warn folks, so you'd know to blame me if things suddenly go dark <grin>. Cheers, Jeremy

3 4

Re: [PATCH 2/4] user32/tests: Correctly restore the caption sizes when run in DPI scaling mode.
by Marvin 11 Apr '17

11 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30112 Your paranoid android. === w8 (32 bit sysparams) === sysparams.c:2500: Test failed: Waiting for the WM_DISPLAYCHANGE message timed out sysparams.c:2511: Test failed: Set bpp 32, but WM_DISPLAYCHANGE reported bpp -1 === w864 (32 bit sysparams) === sysparams.c:272: SPI_SETSCREENSAVETIMEOUT failed for reason: 329. Indicating test failure and skipping remainder of test sysparams.c:273: Test failed: SystemParametersInfoA: rc=0 err=329 sysparams.c:273: Test failed: SystemParametersInfoA: rc=0 err=329 sysparams.c:2500: Test failed: Waiting for the WM_DISPLAYCHANGE message timed out sysparams.c:2511: Test failed: Set bpp 32, but WM_DISPLAYCHANGE reported bpp -1

2 1

Re: [PATCH 4/4] user32/tests: Fix tests for minimium icon spacing when not in DPI scaling mode.
by Marvin 11 Apr '17

11 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30117 Your paranoid android. === w8 (32 bit sysparams) === sysparams.c:2500: Test failed: Waiting for the WM_DISPLAYCHANGE message timed out sysparams.c:2511: Test failed: Set bpp 32, but WM_DISPLAYCHANGE reported bpp -1

1 0

Re: [PATCH 3/4] user32/tests: Fix a few failures in DPI scaling mode.
by Marvin 11 Apr '17

11 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30116 Your paranoid android. === w7u (32 bit sysparams) === sysparams.c:246: Test failed: Missed a message: change_counter=0 sysparams.c:249: Test failed: Wrong action got 0 expected 4 sysparams.c:246: Test failed: Missed a message: change_counter=0 sysparams.c:249: Test failed: Wrong action got 0 expected 4 === w8 (32 bit sysparams) === sysparams.c:2500: Test failed: Waiting for the WM_DISPLAYCHANGE message timed out sysparams.c:2511: Test failed: Set bpp 32, but WM_DISPLAYCHANGE reported bpp -1 === w864 (32 bit sysparams) === The task timed out

1 0

Re: [PATCH 2/2] regedit: Re-implement convertHextToDWord() (v3)
by Alexandre Julliard 11 Apr '17

11 Apr '17

Hugh McMaster <hugh.mcmaster(a)outlook.com> writes: > + while (*buf == ' ' || *buf == '\t') buf++; > + if (!*buf) goto exit; > + > + p = buf; > + while (isxdigit(*p)) > + { > + count++; > + p++; > } > - return TRUE; > + if (count > 8) goto exit; > + > + end = p; > + while (*p == ' ' || *p == '\t') p++; > + if (*p && *p != ';') goto exit; > + > + *end = 0; > + *dw = strtoul(buf, &end, 16); > + ret = TRUE; > + > + exit: > + if (!ret) output_message(STRING_INVALID_HEX); > + HeapFree(GetProcessHeap(), 0, buf); The pointer has been modified, you need to free the original one. -- Alexandre Julliard julliard(a)winehq.org

2 2

Re: [PATCH 1/2] endproc.c: Implement ProcessPage_OnEndProcessTree
by Stefan Dösinger 11 Apr '17

11 Apr '17

Hi Akarsha, Thank you for your patches! My apologies for the very late review of your code. I am currently catching up on my mail after moving :-\ . Your patch has numerous compile errors. Please make sure that the code compiles without errors or warnings before sending it. Am 2017-03-30 um 19:57 schrieb Akarsha Sehwag: > +typedef struct process_list { > + int *pid; /*dynamic array to store the process IDs*/ MODULEENTRY32.th32ProcessID is a DWORD, please use it here as well. > + SIZE_T count; /*index to maintain the last entry of the array;*/ > + SIZE_T size; /*the current size of the pid array*/ > +} process_list; Is it necessary to store the child processes in a separate list? I'd expect that CreateToolhelp32Snapshot creates a snapshot that is not affected by changes to the process tree after it returns. If this is the case you can kill processes as you iterate over the snapshot with Process32Next. This would simplify the code a lot If you keep the list please use a wine list from include/wine/list.h. This will also give you more flexibility in the order of how you kill the processes, see below. > +static void init_process_list(process_list *list) { > + list->size = 4; /*initialise size with 4. Will increase if necessary.*/ > + list->pid = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, size * sizeof(int)); Minor style hint: You can use sizeof(*list->pid) instead of sizeof(int). That way the code doesn't need changes if the type of pid changes. > + if(!Process32First(snapshot, &entry)) > + return; > + > + do > + { > + if(entry.th32ParentProcessID == pid) > + process_list_append(list, entry.th32ProcessID); > + } while (Process32Next(snapshot, &entry)); > + > + end = list->count; > + > + for(i = start; i < end; ++i) > + { > + enum_process_children(snapshot, list, list->pid[i]); > + } I am not sure if this matters, but this will kill parent processes before their children. It may or may not be the correct thing and may be an interesting thing to find out with a test (unfortunately writing automated tests for taskmgr is not easy) I think the same kind of recursion should work if you operate on the snapshot directly without the helper list. > + for(i = 0; i <= list->last; ++i) { > + hProcess = OpenProcess(PROCESS_TERMINATE, FALSE, list->pid[i]); > > --- patch 2 --- > - for(i = 0; i <= list->last; ++i) { > + for(i = 0; i < list->count; ++i) { This should be merged into patch 1. It is important that the code always builds to prevent problems in git bisect (e.g. assume I am looking for a regression in the d3d code, but one of the revisions I want to test doesn't compile taskmgr) With best regards, Stefan

1 1

Help on how to run winetest in debug
by Yashodeep Mahapatra 11 Apr '17

11 Apr '17

Hi All, This is Yashodeep Mahapatra from Birla Institute Of Technology ,Mesra,India. I tried running wine on my machine after building and installing it. But the problem that I am facing is that my system just keeps running the process wine and displays Wine Shell Script in the window. Running wine winecfg also runs in the same way without giving any output on the screen. I also tried running notepad.exe but only a blank screen appeared. wine winecfg command led to this output: err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 err:wincodecs:PngDecoder_CreateInstance Failed reading PNG because unable to find libpng16.16.dylib err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 err:wincodecs:PngDecoder_CreateInstance Failed reading PNG because unable to find libpng16.16.dylib err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 err:wincodecs:PngDecoder_CreateInstance Failed reading PNG because unable to find libpng16.16.dylib err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 and nothing appeared on the screen. wine /programs/winetest/winetest.exe.so gave the following result: err:wincodecs:PngDecoder_CreateInstance Failed reading PNG because unable to find libpng16.16.dylib err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 err:wincodecs:PngDecoder_CreateInstance Failed reading PNG because unable to find libpng16.16.dylib err:menubuilder:convert_to_native_icon error 0x80004005 getting frame 0 Can anyone please help me?

3 2

Re: [PATCH] winhttp/tests: Test when large amount of data is returned from a 410
by Hans Leidekker 11 Apr '17

11 Apr '17

On Tue, 2017-04-11 at 02:08 +0000, Alistair Leslie-Hughes wrote: > diff --git a/dlls/winhttp/tests/winhttp.c b/dlls/winhttp/tests/winhttp.c > index a5eff11..0761c2e 100644 > --- a/dlls/winhttp/tests/winhttp.c > +++ b/dlls/winhttp/tests/winhttp.c > @@ -2059,6 +2059,16 @@ static const char multiauth[] = > "Content-Type: text/plain\r\n" > "\r\n"; > > +static const char largeauth[] = > +"HTTP/1.1 401 Unauthorized\r\n" > +"Server: winetest\r\n" > +"WWW-Authenticate: Bearer\r\n" > +"WWW-Authenticate: Basic realm=\"placebo\"\r\n" > +"WWW-Authenticate: NTLM\r\n" > +"Content-Length: 10240\r\n" > +"Content-Type: text/plain\r\n" > +"\r\n"; Please try to be minimal. You're only using NTLM so the other two authenticate headers are not needed. > @@ -2172,6 +2182,20 @@ static DWORD CALLBACK server_thread(LPVOID param) > { > send(c, multiauth, sizeof multiauth - 1, 0); > } > + if(strstr(buffer, "GET /largeauth")) > + { > + if (strstr(buffer, "Authorization: NTLM")) > + send(c, okmsg, sizeof(okmsg) - 1, 0); > + else > + { > + void *data = malloc(10240); > + send(c, largeauth, sizeof largeauth - 1, 0); > + memset(data, 'A', 10240); > + send(c, data, 10240, 0); > + free(data); > + continue; You can avoid the allocation e.g. by sending 1 byte in a loop. > +static void test_large_data_authentication(int port) > +{ > + static const WCHAR largeauthW[] = {'/','l','a','r','g','e','a','u','t','h',0}; > + static const WCHAR getW[] = {'G','E','T',0}; > + static WCHAR userW[] = {'u','s','e','r',0}; > + static WCHAR passW[] = {'p','w','d',0}; > + HINTERNET ses, con, req; > + DWORD supported, first, target, status, size; > + BOOL ret; > + > + ses = WinHttpOpen(test_useragent, WINHTTP_ACCESS_TYPE_NO_PROXY, NULL, NULL, 0); > + ok(ses != NULL, "failed to open session %u\n", GetLastError()); > + > + con = WinHttpConnect(ses, localhostW, port, 0); > + ok(con != NULL, "failed to open a connection %u\n", GetLastError()); > + > + req = WinHttpOpenRequest(con, getW, largeauthW, NULL, NULL, NULL, 0); > + ok(req != NULL, "failed to open a request %u\n", GetLastError()); > + > + ret = WinHttpSendRequest(req, WINHTTP_NO_ADDITIONAL_HEADERS, 0, > + WINHTTP_NO_REQUEST_DATA,0, 0, 0 ); > + ok(ret, "expected success\n"); > + > + ret = WinHttpReceiveResponse(req, NULL); > + ok(ret, "expected success\n"); > + > + size = sizeof(status); > + ret = WinHttpQueryHeaders(req, WINHTTP_QUERY_STATUS_CODE | WINHTTP_QUERY_FLAG_NUMBER, NULL, > + &status, &size, NULL ); > + ok(ret, "expected success\n"); > + ok(status == HTTP_STATUS_DENIED, "got %d\n", status); > + > + supported = first = target = 0xdeadbeef; > + ret = WinHttpQueryAuthSchemes(req, &supported, &first, &target); > + ok(ret, "expected success\n"); > + ok(supported == (WINHTTP_AUTH_SCHEME_BASIC | WINHTTP_AUTH_SCHEME_NTLM), "got %x\n", supported); > + ok(target == WINHTTP_AUTH_TARGET_SERVER, "got %x\n", target); > + ok(first == WINHTTP_AUTH_SCHEME_BASIC, "got %x\n", first); This is also copied from another test and not strictly needed. You can hardcode scheme and target. WinHttpQueryAuthSchemes is already tested elsewhere.

1 0

Re: [v2 PATCH 2/2] odbccp32: Handle ODBC_CONFIG_DRIVER request in SQLConfigDriver/W
by Huw Davies 11 Apr '17

11 Apr '17

On Mon, Apr 10, 2017 at 04:30:48AM +0000, Alistair Leslie-Hughes wrote: > diff --git a/dlls/odbccp32/odbccp32.c b/dlls/odbccp32/odbccp32.c > index f28d464..2f415c7 100644 > --- a/dlls/odbccp32/odbccp32.c > +++ b/dlls/odbccp32/odbccp32.c > @@ -303,6 +303,41 @@ static HMODULE load_config_driver(const WCHAR *driver) > return hmod; > } > > +static BOOL write_timeout_value(const WCHAR *driver, const WCHAR *args) > +{ > + static WCHAR cptimeout[] = {'C','P','T','i','m','e','o','u','t',0}; > + long ret; > + HKEY hkey; > + WCHAR *position; > + > + if ( !(position = strstrW(args, cptimeout))) > + return FALSE; > + > + if ((ret = RegOpenKeyW(HKEY_LOCAL_MACHINE, odbcini, &hkey)) == ERROR_SUCCESS) > + { > + HKEY hkeydriver; > + > + if ((ret = RegOpenKeyW(hkey, driver, &hkeydriver)) == ERROR_SUCCESS) > + { > + const WCHAR *value = &args[sizeof(cptimeout) / sizeof(WCHAR)]; > + > + TRACE("CPTimeout value %s\n", debugstr_w(value)); > + if(RegSetValueExW(hkeydriver, cptimeout, 0, REG_SZ, (BYTE*)value, > + strlenW(value) * sizeof(WCHAR)) != ERROR_SUCCESS) > + ERR("Failed to write registry installed key\n"); > + What are the possible formats of the arg string here? You initially strstr to find "CPTimeout" (which is fine). Later on, when you assign value, you're assuming that "CPTimeout" is at the beginning of the string (and this is a pretty ugly way of doing it). You're then writting anything that follows to the registry. Could there be more than one arg, if so how are they separated? Huw.

1 0

Re: [PATCH] winhttp/tests: Test when large amount of data is returned from a 410
by Marvin 11 Apr '17

11 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30105 Your paranoid android. === w864 (64 bit winhttp) === winhttp.c:3831: Test failed: got 80090321

1 0

Re: [PATCH 4/5] wined3d: Fix specular lighting calculation.
by Alexandre Julliard 10 Apr '17

10 Apr '17

Matteo Bruni <mbruni(a)codeweavers.com> writes: > Signed-off-by: Matteo Bruni <mbruni(a)codeweavers.com> > --- > For bug 41827. > > I don't really like the shader_glsl_ffp_vertex_lighting_footer name but I > couldn't think of anything nicer... > > dlls/d3d8/tests/visual.c | 59 +++++++++++++++++++++++++++++++++------------- > dlls/d3d9/tests/visual.c | 59 +++++++++++++++++++++++++++++++++------------- > dlls/ddraw/tests/ddraw2.c | 49 +++++++++++++++++++++++++++++--------- > dlls/ddraw/tests/ddraw4.c | 51 +++++++++++++++++++++++++++++---------- > dlls/ddraw/tests/ddraw7.c | 59 +++++++++++++++++++++++++++++++++------------- > dlls/wined3d/glsl_shader.c | 50 +++++++++++++++------------------------ > 6 files changed, 225 insertions(+), 102 deletions(-) The tests fail here: ../../../tools/runtest -q -P wine -T ../../.. -M d3d8.dll -p d3d8_test.exe.so visual && touch visual.ok visual.c:793: Test failed: Expected color 0x00000000 at location (160, 120), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (320, 120), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (480, 120), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (160, 240), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (320, 240), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (480, 240), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (160, 360), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (320, 360), got 0x00ffffff, case 7. visual.c:793: Test failed: Expected color 0x00000000 at location (480, 360), got 0x00ffffff, case 7. visual.c:2790: Tests skipped: D3DFMT_P8 textures not supported. visual.c:4294: Tests skipped: No RESZ support, skipping RESZ test. visual.c:4971: Tests skipped: Volume DXT5 textures are not supported, skipping test. visual.c:6632: Tests skipped: Volume ATI2N textures are not supported, skipping some tests. Makefile:246: recipe for target 'visual.ok' failed make: *** [visual.ok] Error 9 -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/2] regedit/tests: Add tests for importing DWORD values
by Alexandre Julliard 10 Apr '17

10 Apr '17

Hugh McMaster <hugh.mcmaster(a)outlook.com> writes: > Signed-off-by: Hugh McMaster <hugh.mcmaster(a)outlook.com> > --- > programs/regedit/tests/regedit.c | 56 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 56 insertions(+) It fails here: ../../../tools/runtest -q -P wine -T ../../.. -M regedit.exe -p regedit.exe_test.exe.so regedit && touch regedit.ok regedit.c:803: Test failed: RegQueryValueEx failed: got 2 regedit.c:804: Test failed: RegQueryValueEx failed: got 2 Makefile:174: recipe for target 'regedit.ok' failed make[1]: *** [regedit.ok] Error 2 -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [v2 1/2] d3dx9: Support relative addressing in preshader.
by Matteo Bruni 10 Apr '17

10 Apr '17

2017-03-24 23:12 GMT+01:00 Paul Gofman <gofmanp(a)gmail.com>: > @@ -697,13 +739,13 @@ static HRESULT parse_preshader(struct d3dx_preshader *pres, unsigned int *ptr, u > for (i = 0; i < pres->ins_count; ++i) > { > for (j = 0; j < pres_op_info[pres->ins[i].op].input_count; ++j) > - update_table_size(pres->regs.table_sizes, pres->ins[i].inputs[j].table, > - get_reg_offset(pres->ins[i].inputs[j].table, > - pres->ins[i].inputs[j].offset + pres->ins[i].component_count - 1)); > + update_table_size(pres->regs.table_sizes, pres->ins[i].inputs[j].reg.table, > + get_reg_offset(pres->ins[i].inputs[j].reg.table, > + pres->ins[i].inputs[j].reg.offset + pres->ins[i].component_count - 1)); > > - update_table_size(pres->regs.table_sizes, pres->ins[i].output.table, > - get_reg_offset(pres->ins[i].output.table, > - pres->ins[i].output.offset + pres->ins[i].component_count - 1)); > + update_table_size(pres->regs.table_sizes, pres->ins[i].output.reg.table, > + get_reg_offset(pres->ins[i].output.reg.table, > + pres->ins[i].output.reg.offset + pres->ins[i].component_count - 1)); Do these update_table_size() always do the right thing with relative addressing? If I'm not mistaken, they should be fine because we only accept relative addressing for CONST and IMMED and the former is taken care by update_table_sizes_consts() just below while the latter's size is set statically just above this chunk. I think that means though that we don't need to call update_table_size() on the input arguments. If that sounds right to you, you could drop that "for(j)" altogether or, probably better, replace the update_table_size() with a check that the argument is not out of bounds (probably returning failure if the check doesn't pass). That should be a separate patch. > @@ -1088,18 +1130,65 @@ static HRESULT init_set_constants(struct d3dx_const_tab *const_tab, ID3DXConstan > return ret; > } > > +static double exec_get_reg_value(struct d3dx_regstore *rs, enum pres_reg_tables table, unsigned int offset) > +{ > + if (!regstore_is_val_set_reg(rs, table, offset / table_info[table].reg_component_count)) > + WARN("Using uninitialized input, table %u, offset %u.\n", table, offset); > + > + return regstore_get_double(rs, table, offset); > +} > + > static double exec_get_arg(struct d3dx_regstore *rs, const struct d3dx_pres_operand *opr, unsigned int comp) > { > - if (!regstore_is_val_set_reg(rs, opr->table, (opr->offset + comp) / table_info[opr->table].reg_component_count)) > - WARN("Using uninitialized input, table %u, offset %u.\n", opr->table, opr->offset + comp); > + unsigned int offset, base_index, reg_index, table; > + > + table = opr->reg.table; > + > + if (opr->index_reg.table == PRES_REGTAB_COUNT) > + base_index = 0; > + else > + base_index = lrint(exec_get_reg_value(rs, opr->index_reg.table, opr->index_reg.offset)); > + > + /* '4' is used instead of reg_component_count, as immediate constants (which have > + * reg_component_count of 1) are still indexed as 4 values according to the tests. > + */ > + offset = base_index * 4 + opr->reg.offset + comp; Actually, is there any reason why reg_component_count for PRES_REGTAB_IMMED isn't 4? Maybe change it to 4 and in parse_preshader() check that const_count is a multiple of 4 (which is something we're depending on anyway). That would be a separate patch too. Clue me if I'm missing anything. > + reg_index = offset / table_info[table].reg_component_count; > + > + if (reg_index >= rs->table_sizes[table]) > + { > + unsigned int wrap_size; > + > + if (table == PRES_REGTAB_CONST) > + { > + /* As it can be guessed from tests (by iterating base register value and > + * observing the period of result values repeat), offset into floating > + * constant table are wrapped to the nearest power of 2 and not to the > + * actual table size. > + */ > + for (wrap_size = 1; wrap_size < rs->table_sizes[table]; wrap_size <<= 1) > + ; Please close the comment on the last text line (i.e. "*/" shouldn't be on its own line) and maybe remove the part in parentheses which is pretty obvious. I like the comment otherwise. Another thing on this, maybe add a WARN() on wrapped accesses to show what offset (or value) is returned in that case? Ignore it if you don't think that's useful.

2 9

Re: [3/3] [resend] wsdapi/tests: Add initial tests for WSDCreateDiscoveryPublisher
by Alexandre Julliard 10 Apr '17

10 Apr '17

Owen Rudge <orudge(a)codeweavers.com> writes: > +START_TEST(discovery) > +{ > + HMODULE dllHandle; > + > + CoInitialize(NULL); > + > + dllHandle = LoadLibraryA("wsdapi.dll"); > + > + if (dllHandle) > + { > + BOOL ret; > + > + ret = FreeLibrary(dllHandle); > + ok(ret, "FreeLibrary(1) returned %d\n", GetLastError()); > + } This test doesn't seem very useful. Also there shouldn't be any reason to load the library dynamically, you could simply link to it. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/13] msidb: Add stub tool for manipulating MSI databases.
by Hans Leidekker 10 Apr '17

10 Apr '17

On Sun, 2017-04-09 at 13:12 -0600, Erich E. Hoover wrote: > The "Windows SDK Components for Windows Installer Developers" has a > command line tool called msidb that is incredibly useful for creating, > editing, and exporting MSI installer databases, think of it as > winemsibuilder on steroids. This patch series implements much of the > functionality of the msidb tool, maintains compatible CLI flags, and > the underlying MSI functionality necessary to support these features. > With this patch series all the existing winemsibuilder functionality > is available, plus the ability to drop streams, export the > _SummaryInformation table, export binary streams (Binary/Icon tables), > and some miscellaneous bug fixes. A big feature of the implementation > is that it allows you to edit existing installer databases, rather > than just creating new ones. I can see how the extra functionality is useful for package builders but at the same time it's not essential to build Wine. That doesn't mean we can't maintain it in Wine, but I can also see it being part of a separate SDK tools project. Have you considered that?

2 1

Re: [PATCH] regedit: Do not import DWORD values beginning with "0x" (v2)
by Marvin 10 Apr '17

10 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30089 Your paranoid android. === build (build) === Patch failed to apply

1 0

Re: [PATCH] xmllite/writer: Fix IID argument handling in CreateXmlWriter()
by Jacek Caban 10 Apr '17

10 Apr '17

Hi Nikolay, On 4/10/17 6:37 AM, Nikolay Sivov wrote: > + hr = CreateXmlWriter(&IID_IStream, (void **)&unk, NULL); > + ok(hr == E_NOINTERFACE, "got %08x\n", hr); > + > + hr = CreateXmlWriter(&IID_IUnknown, (void **)&unk, NULL); > + ok(hr == S_OK, "Expected S_OK, got %08x\n", hr); > + hr = IUnknown_QueryInterface(unk, &IID_IUnknown, (void **)&writer); > + I think you meant IID_IXmlWriter here. Jacek

2 1

Re: [PATCH 2/2] odbccp32: Handle ODBC_CONFIG_DRIVER request in SQLConfigDriver/W
by Marvin 10 Apr '17

10 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30067 Your paranoid android. === build (build) === Make failed

1 0

Re: [PATCH 2/2 v2] ntdll: Zero debug registers after thread creation
by Michael Müller 09 Apr '17

09 Apr '17

Am 07.04.2017 um 17:52 schrieb Christian Inci: > DWORD tid = 0; > int request_pipe[2]; > + CONTEXT ctx; > NTSTATUS status; > > [...] > > + ctx.ContextFlags = CONTEXT_DEBUG_REGISTERS; > + NtSetContextThread(handle, &ctx); > + You didn't initialize the register values and therefore set the debug registers to random stack values. You should either initialize them manually or memset the whole struct.

3 4

Re: [PATCH v2 1/5] wined3d: Save pixel and vertex shader resource views in stateblocks.
by Henri Verbeet 09 Apr '17

09 Apr '17

On 5 April 2017 at 15:38, Józef Kucia <jkucia(a)codeweavers.com> wrote: > @@ -3129,6 +3129,8 @@ struct wined3d_saved_states > WORD vertexShaderConstantsB; /* WINED3D_MAX_CONSTS_B, 16 */ > WORD vertexShaderConstantsI; /* WINED3D_MAX_CONSTS_I, 16 */ > BOOL vs_consts_f[WINED3D_MAX_VS_CONSTS_F]; > + DWORD pixel_shader_resource_views : 16; /* MAX_FRAGMENT_SAMPLERS, 16 */ > + DWORD vertex_shader_resource_views : 4; /* MAX_VERTEX_SAMPLERS, 4 */ > DWORD textures : 20; /* MAX_COMBINED_SAMPLERS, 20 */ > DWORD indices : 1; > DWORD material : 1; > @@ -3137,17 +3139,18 @@ struct wined3d_saved_states > DWORD pixelShader : 1; > DWORD vertexShader : 1; > DWORD scissorRect : 1; > - DWORD padding : 5; > + DWORD padding : 17; That doesn't do the right thing, unfortunately: struct wined3d_saved_states { DWORD transform[16]; /* 0 64 */ /* --- cacheline 1 boundary (64 bytes) --- */ WORD streamSource; /* 64 2 */ WORD streamFreq; /* 66 2 */ DWORD renderState[7]; /* 68 28 */ DWORD textureState[8]; /* 96 32 */ /* --- cacheline 2 boundary (128 bytes) --- */ WORD samplerState[20]; /* 128 40 */ DWORD clipplane; /* 168 4 */ WORD pixelShaderConstantsB; /* 172 2 */ WORD pixelShaderConstantsI; /* 174 2 */ BOOL ps_consts_f[224]; /* 176 896 */ /* --- cacheline 16 boundary (1024 bytes) was 48 bytes ago --- */ WORD vertexShaderConstantsB; /* 1072 2 */ WORD vertexShaderConstantsI; /* 1074 2 */ BOOL vs_consts_f[256]; /* 1076 1024 */ /* --- cacheline 32 boundary (2048 bytes) was 52 bytes ago --- */ DWORD pixel_shader_resource_views:16; /* 2100:16 4 */ DWORD vertex_shader_resource_views:4; /* 2100:12 4 */ /* XXX 12 bits hole, try to pack */ DWORD textures:20; /* 2104:12 4 */ DWORD indices:1; /* 2104:11 4 */ DWORD material:1; /* 2104:10 4 */ DWORD viewport:1; /* 2104: 9 4 */ DWORD vertexDecl:1; /* 2104: 8 4 */ DWORD pixelShader:1; /* 2104: 7 4 */ DWORD vertexShader:1; /* 2104: 6 4 */ DWORD scissorRect:1; /* 2104: 5 4 */ /* XXX 5 bits hole, try to pack */ DWORD padding:17; /* 2108:15 4 */ /* --- cacheline 33 boundary (2112 bytes) --- */ /* size: 2112, cachelines: 33, members: 24 */ /* bit holes: 2, sum bit holes: 17 bits */ /* bit_padding: 15 bits */ }; Incidentally, this also illustrates the issue of the ps_consts_f and vs_consts_f fields using up way more space than needed.

3 2

Re: [resend PATCH 4/4] d3dx9: Effect should preserve states regardless of state manager presence.
by Matteo Bruni 09 Apr '17

09 Apr '17

2017-04-06 1:32 GMT+02:00 Paul Gofman <gofmanp(a)gmail.com>: > Signed-off-by: Paul Gofman <gofmanp(a)gmail.com> Given that you have to resend anyway... It's generally preferred to write commit subjects in the imperative mood, so in this case it would be "Preserve states regardless of state manager presence." A slightly different, more direct, alternative would be "Ignore state manager when saving and restoring device state." Choose whatever you prefer (including something else entirely).

1 0

Re: [resend PATCH 2/4] d3dx9/tests: Add tests for effect state manager.
by Matteo Bruni 09 Apr '17

09 Apr '17

2017-04-06 1:32 GMT+02:00 Paul Gofman <gofmanp(a)gmail.com>: > Signed-off-by: Paul Gofman <gofmanp(a)gmail.com> > --- > + static const struct test_state_manager_update test_effect_states_record[] = expected_updates[]?

1 0

Re: [resend PATCH 1/4] d3dx9/tests: Add test implementation for ID3DXEffectStateManager interface.
by Matteo Bruni 09 Apr '17

09 Apr '17

2017-04-06 1:32 GMT+02:00 Paul Gofman <gofmanp(a)gmail.com>: > +struct test_state_manager_update > +{ > + unsigned int state_op; > + DWORD param1; > + DWORD param2; > +}; > + > +struct test_ID3DXEffectStateManagerImpl Sorry for being a PITA but it would be better to avoid this kind of naming, at a first glance it might be confused with a MS structure. Just call it test_manager or similar. > +static HRESULT WINAPI test_ID3DXEffectStateManagerImpl_QueryInterface(ID3DXEffectStateManager *iface, > + REFIID riid, void **object) > +{ > + if (IsEqualGUID(riid, &IID_IUnknown) > + || IsEqualGUID(riid, &IID_ID3DXEffectStateManager)) > + { > + iface->lpVtbl->AddRef(iface); > + *object = iface; > + return S_OK; > + } > + > + return E_NOINTERFACE; > +} Do you know if this is called by d3dx9 at all? Either way, adding some ok() here would be nice. > + state_manager->update_record = new_alloc; > + state_manager->update_record_size = new_size; > + > + } Spurious blank line. Also I'm not sure it makes a lot of sense to use new_alloc / new_size and check that the allocation succeeded with ok() to then always assign the new variables to the struct fields anyway. Memory allocation should never legitimately fail there so I'd remove the vestigial error checking entirely and let the test crash if the allocation somehow fails.

1 0

Re: [PATCH] d3dx11: Add D3DX11FilterTexture stub.
by Matteo Bruni 09 Apr '17

09 Apr '17

2017-04-03 18:49 GMT+02:00 Andrey Gusev <andrey.goosev(a)gmail.com>: > Signed-off-by: Andrey Gusev <andrey.goosev(a)gmail.com> > diff --git a/include/d3dx11tex.h b/include/d3dx11tex.h > index 16b280a..81a43cc 100644 > --- a/include/d3dx11tex.h > +++ b/include/d3dx11tex.h > @@ -93,6 +93,8 @@ HRESULT WINAPI D3DX11CreateShaderResourceViewFromMemory(ID3D11Device *device, co > HRESULT WINAPI D3DX11CreateTextureFromMemory(ID3D11Device *device, const void *src_data, SIZE_T src_data_size, > D3DX11_IMAGE_LOAD_INFO *loadinfo, ID3DX11ThreadPump *pump, ID3D11Resource **texture, HRESULT *hresult); > > +HRESULT WINAPI D3DX11FilterTexture(ID3D11DeviceContext *context, ID3D11Resource *texture, UINT src_level, UINT filter); > + > HRESULT WINAPI D3DX11GetImageInfoFromMemory(const void *src_data, SIZE_T src_data_size, ID3DX11ThreadPump *pump, > D3DX11_IMAGE_INFO *img_info, HRESULT *hresult); > > -- > 2.7.4 Could you please also add the D3DX11_FILTER_FLAG definition to d3dx11tex.h? Looks okay otherwise.

1 0

GSoC Mentors
by André Hentschel 09 Apr '17

09 Apr '17

Hi, for those who had not had a look at the proposals yet, please review them and comment. Thanks!

1 0

Re: [PATCH v5] ntdll/tests: Check debug registers of a newly created thread
by Marvin 09 Apr '17

09 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30054 Your paranoid android. === build (build) === Make failed

1 0

Wine-Staging Performance Regression since 2.0rc6
by Bjoern Bidar/Thaodan 08 Apr '17

08 Apr '17

Hello guys I hope this is the right place to ask. Since after 2.0rc6 many Wow user getting worse performance. For comparsion: 2.0rc6: 65fps 2.1/2.2: about 40 2.4: no change either even the main menu lags when you look close. To test just download the game and open it even the main menu lags as said before. Me and many users don't know how to help in debugging the issue, so im asking here. Greetings Björn

1 0

Re: [PATCH 2/4] winex11: move XDestroyWindow() after free_gl_drawable() in set_win_format()
by Alexandre Julliard 08 Apr '17

08 Apr '17

Miklós Máté <mtmkls(a)gmail.com> writes: > @@ -1334,21 +1334,21 @@ static void free_gl_drawable( struct gl_drawable *gl ) > /*********************************************************************** > * create_gl_drawable > */ > -static BOOL create_gl_drawable( HWND hwnd, struct gl_drawable *gl ) > +static BOOL create_gl_drawable( HWND hwnd, struct gl_drawable *gl, struct x11drv_win_data *data ) > { > gl->drawable = 0; > > if (GetAncestor( hwnd, GA_PARENT ) == GetDesktopWindow()) /* top-level window */ > { > - struct x11drv_win_data *data = get_win_data( hwnd ); > - > if (data) > { > gl->type = DC_GL_WINDOW; > gl->window = create_client_window( data, gl->visual ); > if (gl->window) > + { > gl->drawable = pglXCreateWindow( gdi_display, gl->format->fbconfig, gl->window, NULL ); > - release_win_data( data ); > + XSync( gdi_display, False ); Do you really need all the extra XSync calls? We try to avoid server round-trips as much as possible. -- Alexandre Julliard julliard(a)winehq.org

2 5

Re: [PATCH 1/2 v4] ntdll/tests: Check debug registers of a newly created thread
by Dmitry Timoshkov 08 Apr '17

08 Apr '17

Hi Christian, Christian Inci <chris.wine(a)broke-the-inter.net> wrote: > + thread = CreateThread(NULL, 0, dummy_thread, NULL, CREATE_SUSPENDED, NULL); > + ok(thread != INVALID_HANDLE_VALUE, "CreateThread failed with %d\n", GetLastError()); > + memset(&ctx, 0, sizeof(ctx)); > + ctx.ContextFlags = CONTEXT_DEBUG_REGISTERS; > + status = pNtGetContextThread(thread, &ctx); > + ok(status == STATUS_SUCCESS, "NtGetContextThread failed with %x\n", status); > + ok(!ctx.Dr0, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr0); > + ok(!ctx.Dr1, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr1); > + ok(!ctx.Dr2, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr2); > + ok(!ctx.Dr3, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr3); > + todo_wine ok(!ctx.Dr6, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr6); > + todo_wine ok(!ctx.Dr7, "expected 0, got %lx\n", (DWORD_PTR)ctx.Dr7); > + CloseHandle(thread); > +} The thread needs to be explicitly terminated. -- Dmitry.

2 1

Re: [PATCH] tools/winedump: Change duplicate flag.
by Alexandre Julliard 07 Apr '17

07 Apr '17

Zebediah Figura <z.figura12(a)gmail.com> writes: > diff --git a/tools/winedump/main.c b/tools/winedump/main.c > index a4ebb43..5c683f6 100644 > --- a/tools/winedump/main.c > +++ b/tools/winedump/main.c > @@ -226,7 +226,7 @@ static const struct my_option option_table[] = { > {"-v", SPEC, 0, do_verbose, "-v Show lots of detail while working (verbose)."}, > {"dump", DUMP, 0, do_dump, "dump <file> Dump the contents of 'file' (dll, exe, lib...)"}, > {"-C", DUMP, 0, do_symdmngl, "-C Turn on symbol demangling"}, > - {"-f", DUMP, 0, do_dumphead, "-f Dump file header information"}, > + {"-F", DUMP, 0, do_dumphead, "-F Dump file header information"}, Not a big deal, but is there a reason for changing this? -- Alexandre Julliard julliard(a)winehq.org

2 5

Re: [PATCH 1/2 v2] ntdll/tests: Check debug registers of a newly created thread
by Christian Inci 07 Apr '17

07 Apr '17

Forgot to send the response to wine-devel too. On 04/07/2017 10:01 PM, Christian Inci wrote: > Thank you very much for letting me know. > > Setting Dr7 with the "wrong" bits set will result into this error. > I'm going to change the testcase right now. > > On 04/07/2017 09:07 PM, Alexandre Julliard wrote: >> Christian Inci <chris.wine(a)broke-the-inter.net> writes: >> >>> +static void test_thread_debug_registers(void) >>> +{ >>> + HANDLE thread; >>> + CONTEXT ctx; >>> + NTSTATUS status; >>> + >>> + ctx.ContextFlags = CONTEXT_DEBUG_REGISTERS; >>> + ctx.Dr0 = 0xffffffff; >>> + ctx.Dr1 = 0xffffffff; >>> + ctx.Dr2 = 0xffffffff; >>> + ctx.Dr3 = 0xffffffff; >>> + ctx.Dr6 = 0xffffffff; >>> + ctx.Dr7 = 0xffffffff; >>> + status = pNtSetContextThread(GetCurrentThread(), &ctx); >>> + todo_wine ok(status == STATUS_SUCCESS, "NtSetContextThread failed with %x\n", status); >> >> It would be a more convincing test if setting the context succeeded. The >> failure is of course interesting too, but that could be a separate test. >>

1 0

Re: [PATCH v4 4/4] user32/tests: Fix an intermittent failure. (resend)
by Marvin 07 Apr '17

07 Apr '17

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=30041 Your paranoid android. === w7u (32 bit msg) === msg.c:12062: Test failed: WmMouseHoverSeq: 0: the msg sequence is not complete: expected 0118 - actual 0000 msg.c:12064: Test failed: wrong tme.dwFlags 00000001, expected 00000000 msg.c:12064: Test failed: wrong tme.hwndTrack 0018017E, expected 00000000 msg.c:12064: Test failed: wrong tme.dwHoverTime 400, expected 0 === w7pro64 (32 bit msg) === msg.c:12609: Test failed: 54: ShowWindow(SW_MINIMIZE): 4: in msg 0x0047 expecting wParam 0x8170 got 0x1803 msg.c:12609: Test failed: 54: ShowWindow(SW_MINIMIZE): 5: the msg 0x0003 was expected, but got msg 0x0047 instead msg.c:12609: Test failed: 54: ShowWindow(SW_MINIMIZE): 6: the msg 0x0005 was expected, but got msg 0x0003 instead msg.c:12609: Test failed: 54: ShowWindow(SW_MINIMIZE): 7: the msg sequence is not complete: expected 0000 - actual 0005

1 0

Re: [PATCH] tools/winedump: Change duplicate flag.
by Austin English 07 Apr '17

07 Apr '17

On Apr 7, 2017 2:22 PM, "Zebediah Figura" <z.figura12(a)gmail.com> wrote: On 04/07/2017 02:09 PM, Alexandre Julliard wrote: > Zebediah Figura <z.figura12(a)gmail.com> writes: > >> diff --git a/tools/winedump/main.c b/tools/winedump/main.c >> index a4ebb43..5c683f6 100644 >> --- a/tools/winedump/main.c >> +++ b/tools/winedump/main.c >> @@ -226,7 +226,7 @@ static const struct my_option option_table[] = { >> {"-v", SPEC, 0, do_verbose, "-v Show lots of detail while working (verbose)."}, >> {"dump", DUMP, 0, do_dump, "dump <file> Dump the contents of 'file' (dll, exe, lib...)"}, >> {"-C", DUMP, 0, do_symdmngl, "-C Turn on symbol demangling"}, >> - {"-f", DUMP, 0, do_dumphead, "-f Dump file header information"}, >> + {"-F", DUMP, 0, do_dumphead, "-F Dump file header information"}, > > Not a big deal, but is there a reason for changing this? > The -f flag is assigned to two different options, yielding this one unreachable. Please also update the manpage. Thanks for catching this!

1 0

Re: [PATCH 1/2 v2] ntdll/tests: Check debug registers of a newly created thread
by Alexandre Julliard 07 Apr '17

07 Apr '17

Christian Inci <chris.wine(a)broke-the-inter.net> writes: > +static void test_thread_debug_registers(void) > +{ > + HANDLE thread; > + CONTEXT ctx; > + NTSTATUS status; > + > + ctx.ContextFlags = CONTEXT_DEBUG_REGISTERS; > + ctx.Dr0 = 0xffffffff; > + ctx.Dr1 = 0xffffffff; > + ctx.Dr2 = 0xffffffff; > + ctx.Dr3 = 0xffffffff; > + ctx.Dr6 = 0xffffffff; > + ctx.Dr7 = 0xffffffff; > + status = pNtSetContextThread(GetCurrentThread(), &ctx); > + todo_wine ok(status == STATUS_SUCCESS, "NtSetContextThread failed with %x\n", status); It would be a more convincing test if setting the context succeeded. The failure is of course interesting too, but that could be a separate test. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH] regedit: Correctly handle the importing of DWORD strings that are followed by a comment
by Alexandre Julliard 07 Apr '17

07 Apr '17

Hugh McMaster <hugh.mcmaster(a)outlook.com> writes: > Signed-off-by: Hugh McMaster <hugh.mcmaster(a)outlook.com> > --- > programs/regedit/regproc.c | 29 ++++++++++++++++++++++++----- > programs/regedit/tests/regedit.c | 4 ++-- > 2 files changed, 26 insertions(+), 7 deletions(-) > > diff --git a/programs/regedit/regproc.c b/programs/regedit/regproc.c > index e0049c6..c8149f5 100644 > --- a/programs/regedit/regproc.c > +++ b/programs/regedit/regproc.c > @@ -146,15 +146,34 @@ static char* GetMultiByteStringN(const WCHAR* strW, int chars, DWORD* len) > */ > static BOOL convertHexToDWord(WCHAR* str, DWORD *dw) > { > - char buf[9]; > + char *buf; > char dummy; > + BOOL ret = TRUE; > > - WideCharToMultiByte(CP_ACP, 0, str, -1, buf, 9, NULL, NULL); > - if (lstrlenW(str) > 8 || sscanf(buf, "%x%c", dw, &dummy) != 1) { > + buf = GetMultiByteString(str); > + if (!buf) return FALSE; > + > + if (strlen(buf) > 8) /* Look for any characters after the DWORD string */ > + { > + char *p = buf + 8; > + > + while (*p == ' ' || *p == '\t') p++; > + if (*p != ';') > + { > + HeapFree(GetProcessHeap(), 0, buf); > + return FALSE; > + } > + buf[8] = 0; > + } > + > + if (sscanf(buf, "%x%c", dw, &dummy) != 1) > + { > output_message(STRING_INVALID_HEX); > - return FALSE; > + ret = FALSE; > } It may be a good idea to write tests for dwords with different numbers of digits, it's not clear to me that this would be doing the right thing. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 2/8] server: Pass async_data_t as varargs in write request.
by Jacek Caban 07 Apr '17

07 Apr '17

On 06.04.2017 17:58, Jacek Caban wrote: > This is needed for later patch that adds APCs to async_data_t, causing > request to exceed allowed size. Having second thoughts about it, I think there is a solution that doesn't require changing async_data_t size. We could require that the first field of callback argument is a pointer to callback. This way we could have just one pointer for callback and its argument, saving space for APC in async_data_t. Please let me know if that would be preferred. Thanks, Jacek

2 1

Re: [PATCH] odbccp32: Implement SQLConfigDriver/W
by Huw Davies 07 Apr '17

07 Apr '17

On Fri, Apr 07, 2017 at 12:48:17AM +0000, Alistair Leslie-Hughes wrote: > v2 - Use worker function to load DLL > - Correctly set error when required. > > Signed-off-by: Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> > --- > dlls/odbccp32/odbccp32.c | 115 ++++++++++++++++++++++++++++++++++++++++++----- > 1 file changed, 105 insertions(+), 10 deletions(-) > > diff --git a/dlls/odbccp32/odbccp32.c b/dlls/odbccp32/odbccp32.c > index 773c5d2..041170a 100644 > --- a/dlls/odbccp32/odbccp32.c > +++ b/dlls/odbccp32/odbccp32.c > @@ -62,6 +62,12 @@ static const WCHAR odbc_error_component_not_found[] = {'C','o','m','p','o','n',' > static const WCHAR odbc_error_out_of_mem[] = {'O','u','t',' ','o','f',' ','m','e','m','o','r','y',0}; > static const WCHAR odbc_error_invalid_param_sequence[] = {'I','n','v','a','l','i','d',' ','p','a','r','a','m','e','t','e','r',' ','s','e','q','u','e','n','c','e',0}; > static const WCHAR odbc_error_invalid_param_string[] = {'I','n','v','a','l','i','d',' ','p','a','r','a','m','e','t','e','r',' ','s','t','r','i','n','g',0}; > +static const WCHAR odbc_error_invalid_dsn[] = {'I','n','v','a','l','i','d',' ','D','S','N',0}; > +static const WCHAR odbc_error_load_lib_failed[] = {'L','o','a','d',' ','L','i','b','r','a','r','y',' ','F','a','i','l','e','d',0}; > +static const WCHAR odbc_error_request_failed[] = {'R','e','q','u','e','s','t',' ','F','a','i','l','e','d',0}; > + > +static BOOL (WINAPI *pConfigDriverW)(HWND hwnd, WORD request, const WCHAR *driver, const WCHAR *args, const WCHAR *msg, WORD msgmax, WORD *msgout); > +static BOOL (WINAPI *pConfigDriverA)(HWND hwnd, WORD request, const char *driver, const char *args, const char *msg, WORD msgmax, WORD *msgout); Is there a reason why pConfigDriverA/W are not local variables? Huw.

1 0

Re: [PATCH 2/2] wmvcore: Add WMReader stubs
by Nikolay Sivov 07 Apr '17

07 Apr '17

On 07.04.2017 6:51, Jefferson Carpenter wrote: > Adds interfaces used by IMesh in bug 42416, except for these: > > 5c938aeb-6378-479e-bfd5-eafba63dc6e9 > 7af7d5ed-4ef9-48da-a4b6-8ea7eb38f5cc > --- > dlls/wmvcore/wmvcore_main.c | 1301 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 1301 insertions(+) > Hi, this is too much for a single patch. Please split it up and add some tests that shows such interfaces are actually supported. To add tests create a 'tests' directory, Makefile.in in it, and wmvcore.c (file name could be different), where you place tests. You'll have to modify configure.ac to add WINE_CONFIG_TEST line in it. If you need to link to wmvcore.dll from your test, you'll need to modify WINE_CONFIG_DLL too, to include implib directive.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel