Signed-off-by: Huw Davies <huw(a)codeweavers.com>
---
dlls/wineoss.drv/midi.c | 128 -------------------------------------
dlls/wineoss.drv/ossmidi.c | 83 ++++++++++++++++++++++++
2 files changed, 83 insertions(+), 128 deletions(-)
diff --git a/dlls/wineoss.drv/midi.c b/dlls/wineoss.drv/midi.c
index 1751af2349e..aa672e211b9 100644
--- a/dlls/wineoss.drv/midi.c
+++ b/dlls/wineoss.drv/midi.c
@@ -173,16 +173,6 @@ static void MIDI_NotifyClient(UINT wDevID, WORD wMsg,
wDevID, wMsg, dwParam1, dwParam2);
switch (wMsg) {
- case MOM_DONE:
- case MOM_POSITIONCB:
- if (wDevID > MODM_NumDevs) return;
-
- dwCallBack = MidiOutDev[wDevID].midiDesc.dwCallback;
- uFlags = MidiOutDev[wDevID].wFlags;
- hDev = MidiOutDev[wDevID].midiDesc.hMidi;
- dwInstance = MidiOutDev[wDevID].midiDesc.dwInstance;
- break;
-
case MIM_OPEN:
case MIM_CLOSE:
case MIM_DATA:
@@ -233,40 +223,6 @@ static int midiCloseSeq(int fd)
return 0;
}
-/* FIXME: this is a bad idea, it's even not static... */
-SEQ_DEFINEBUF(1024);
-
-/* FIXME: this is not reentrant, not static - because of global variable
- * _seqbuf and al.
- */
-/**************************************************************************
- * seqbuf_dump [internal]
- *
- * Used by SEQ_DUMPBUF to flush the buffer.
- *
- */
-void seqbuf_dump(void)
-{
- int fd;
-
- /* The device is already open, but there's no way to pass the
- fd to this function. Rather than rely on a global variable
- we pretend to open the seq again. */
- fd = midiOpenSeq();
- if (_seqbufptr) {
- if (write(fd, _seqbuf, _seqbufptr) == -1) {
- WARN("Can't write data to sequencer %d, errno %d (%s)!\n",
- fd, errno, strerror(errno));
- }
- /* FIXME:
- * in any case buffer is lost so that if many errors occur the buffer
- * will not overrun
- */
- _seqbufptr = 0;
- }
- midiCloseSeq(fd);
-}
-
/**************************************************************************
* midReceiveChar [internal]
*/
@@ -707,88 +663,6 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize)
return MMSYSERR_NOERROR;
}
-/**************************************************************************
- * modLongData [internal]
- */
-static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize)
-{
- int count;
- LPBYTE lpData;
-
- TRACE("(%04X, %p, %08X);\n", wDevID, lpMidiHdr, dwSize);
-
- /* Note: MS doc does not say much about the dwBytesRecorded member of the MIDIHDR structure
- * but it seems to be used only for midi input.
- * Taking a look at the WAVEHDR structure (which is quite similar) confirms this assumption.
- */
-
- if (wDevID >= MODM_NumDevs) return MMSYSERR_BADDEVICEID;
- if (!MidiOutDev[wDevID].bEnabled) return MIDIERR_NODEVICE;
-
- if (MidiOutDev[wDevID].fd == -1) {
- WARN("can't play !\n");
- return MIDIERR_NODEVICE;
- }
-
- lpData = (LPBYTE) lpMidiHdr->lpData;
-
- if (lpData == NULL)
- return MIDIERR_UNPREPARED;
- if (!(lpMidiHdr->dwFlags & MHDR_PREPARED))
- return MIDIERR_UNPREPARED;
- if (lpMidiHdr->dwFlags & MHDR_INQUEUE)
- return MIDIERR_STILLPLAYING;
- lpMidiHdr->dwFlags &= ~MHDR_DONE;
- lpMidiHdr->dwFlags |= MHDR_INQUEUE;
-
- /* FIXME: MS doc is not 100% clear. Will lpData only contain system exclusive
- * data, or can it also contain raw MIDI data, to be split up and sent to
- * modShortData() ?
- * If the latter is true, then the following WARNing will fire up
- */
- if (lpData[0] != 0xF0 || lpData[lpMidiHdr->dwBufferLength - 1] != 0xF7) {
- WARN("The allegedly system exclusive buffer is not correct\n\tPlease report with MIDI file\n");
- }
-
- TRACE("dwBufferLength=%u !\n", lpMidiHdr->dwBufferLength);
- TRACE(" %02X %02X %02X ... %02X %02X %02X\n",
- lpData[0], lpData[1], lpData[2], lpData[lpMidiHdr->dwBufferLength-3],
- lpData[lpMidiHdr->dwBufferLength-2], lpData[lpMidiHdr->dwBufferLength-1]);
-
- switch (MidiOutDev[wDevID].caps.wTechnology) {
- case MOD_FMSYNTH:
- /* FIXME: I don't think there is much to do here */
- break;
- case MOD_MIDIPORT:
- if (lpData[0] != 0xF0) {
- /* Send end of System Exclusive */
- SEQ_MIDIOUT(wDevID - MODM_NumFMSynthDevs, 0xF0);
- WARN("Adding missing 0xF0 marker at the beginning of "
- "system exclusive byte stream\n");
- }
- for (count = 0; count < lpMidiHdr->dwBufferLength; count++) {
- SEQ_MIDIOUT(wDevID - MODM_NumFMSynthDevs, lpData[count]);
- }
- if (lpData[count - 1] != 0xF7) {
- /* Send end of System Exclusive */
- SEQ_MIDIOUT(wDevID - MODM_NumFMSynthDevs, 0xF7);
- WARN("Adding missing 0xF7 marker at the end of "
- "system exclusive byte stream\n");
- }
- SEQ_DUMPBUF();
- break;
- default:
- WARN("Technology not supported (yet) %d !\n",
- MidiOutDev[wDevID].caps.wTechnology);
- return MMSYSERR_NOTENABLED;
- }
-
- lpMidiHdr->dwFlags &= ~MHDR_INQUEUE;
- lpMidiHdr->dwFlags |= MHDR_DONE;
- MIDI_NotifyClient(wDevID, MOM_DONE, (DWORD_PTR)lpMidiHdr, 0L);
- return MMSYSERR_NOERROR;
-}
-
/**************************************************************************
* modPrepare [internal]
*/
@@ -929,8 +803,6 @@ DWORD WINAPI OSS_modMessage(UINT wDevID, UINT wMsg, DWORD_PTR dwUser,
return OSS_MidiInit();
case DRVM_EXIT:
return OSS_MidiExit();
- case MODM_LONGDATA:
- return modLongData(wDevID, (LPMIDIHDR)dwParam1, dwParam2);
case MODM_PREPARE:
return modPrepare(wDevID, (LPMIDIHDR)dwParam1, dwParam2);
case MODM_UNPREPARE:
diff --git a/dlls/wineoss.drv/ossmidi.c b/dlls/wineoss.drv/ossmidi.c
index ee83da8bfcd..7ab78bcbfdd 100644
--- a/dlls/wineoss.drv/ossmidi.c
+++ b/dlls/wineoss.drv/ossmidi.c
@@ -934,6 +934,86 @@ static UINT midi_out_data(WORD dev_id, UINT data)
return MMSYSERR_NOTENABLED;
}
+static UINT midi_out_long_data(WORD dev_id, MIDIHDR *hdr, UINT hdr_size, struct notify_context *notify)
+{
+ struct midi_dest *dest;
+ BYTE *data;
+ unsigned int count;
+
+ TRACE("(%04X, %p, %08X);\n", dev_id, hdr, hdr_size);
+
+ /* Note: MS doc does not say much about the dwBytesRecorded member of the MIDIHDR structure
+ * but it seems to be used only for midi input.
+ * Taking a look at the WAVEHDR structure (which is quite similar) confirms this assumption.
+ */
+
+ if (dev_id >= num_dests) return MMSYSERR_BADDEVICEID;
+ dest = dests + dev_id;
+ if (!dest->bEnabled) return MIDIERR_NODEVICE;
+
+ if (dest->fd == -1)
+ {
+ WARN("can't play !\n");
+ return MIDIERR_NODEVICE;
+ }
+
+ data = (BYTE *)hdr->lpData;
+
+ if (data == NULL)
+ return MIDIERR_UNPREPARED;
+ if (!(hdr->dwFlags & MHDR_PREPARED))
+ return MIDIERR_UNPREPARED;
+ if (hdr->dwFlags & MHDR_INQUEUE)
+ return MIDIERR_STILLPLAYING;
+ hdr->dwFlags &= ~MHDR_DONE;
+ hdr->dwFlags |= MHDR_INQUEUE;
+
+ /* FIXME: MS doc is not 100% clear. Will lpData only contain system exclusive
+ * data, or can it also contain raw MIDI data, to be split up and sent to
+ * modShortData() ?
+ * If the latter is true, then the following WARNing will fire up
+ */
+ if (data[0] != 0xF0 || data[hdr->dwBufferLength - 1] != 0xF7)
+ WARN("The allegedly system exclusive buffer is not correct\n\tPlease report with MIDI file\n");
+
+ TRACE("dwBufferLength=%u !\n", hdr->dwBufferLength);
+ TRACE(" %02X %02X %02X ... %02X %02X %02X\n",
+ data[0], data[1], data[2], data[hdr->dwBufferLength - 3],
+ data[hdr->dwBufferLength - 2], data[hdr->dwBufferLength - 1]);
+
+ switch (dest->caps.wTechnology)
+ {
+ case MOD_FMSYNTH:
+ /* FIXME: I don't think there is much to do here */
+ break;
+ case MOD_MIDIPORT:
+ if (data[0] != 0xF0)
+ {
+ /* Send end of System Exclusive */
+ SEQ_MIDIOUT(dev_id - num_synths, 0xF0);
+ WARN("Adding missing 0xF0 marker at the beginning of system exclusive byte stream\n");
+ }
+ for (count = 0; count < hdr->dwBufferLength; count++)
+ SEQ_MIDIOUT(dev_id - num_synths, data[count]);
+ if (data[count - 1] != 0xF7)
+ {
+ /* Send end of System Exclusive */
+ SEQ_MIDIOUT(dev_id - num_synths, 0xF7);
+ WARN("Adding missing 0xF7 marker at the end of system exclusive byte stream\n");
+ }
+ SEQ_DUMPBUF();
+ break;
+ default:
+ WARN("Technology not supported (yet) %d !\n", dest->caps.wTechnology);
+ return MMSYSERR_NOTENABLED;
+ }
+
+ hdr->dwFlags &= ~MHDR_INQUEUE;
+ hdr->dwFlags |= MHDR_DONE;
+ set_out_notify(notify, dest, dev_id, MOM_DONE, (UINT_PTR)hdr, 0);
+ return MMSYSERR_NOERROR;
+}
+
NTSTATUS midi_out_message(void *args)
{
struct midi_out_message_params *params = args;
@@ -956,6 +1036,9 @@ NTSTATUS midi_out_message(void *args)
case MODM_DATA:
*params->err = midi_out_data(params->dev_id, params->param_1);
break;
+ case MODM_LONGDATA:
+ *params->err = midi_out_long_data(params->dev_id, (MIDIHDR *)params->param_1, params->param_2, params->notify);
+ break;
default:
TRACE("Unsupported message\n");
*params->err = MMSYSERR_NOTSUPPORTED;
--
2.25.1