wine-devel

wine-devel@winehq.org

9 participants
84397 discussions

Re: wine server protocol error running Notes
by David.Goodenough＠dga.co.uk 06 May '01

06 May '01

You are right, the latest version does not seem to have this problem and seems much better all round. There are still a few messages coming up, and one failure. 1) There is an err:ntdll:RtlpWaitForCritical Section timed out message, which seems to work during the retry. This is running on a 500MHz box with 384MB of memory, so it is not as though this machine is slow. 2) Various fixme's for SetConsoleCtrlHandler. It does not seem to matter that this function does not work yet, but Notes seems to want to make some use of it. 3) fixme:string:GetLocalInfoA 'IDEFAULTLANGUAGE' is not defined for your language (0009). Now this one confuses me a bit, as from what I have read in the W32 SDK docs 0009 is not a valid language so I wonder what a real Notes system does with this request. It is the root of the English family of languages, but not a valid one on its own. All I can think is that it is meant to be some kind of International English. Should it simply be aliased to US English (or possibly UK English). 4) fixme:ole:CoRegisterMessageFilter stub. I seem to remember asking about this before and being told it was unlikely to matter, but I include it for completeness. 5) fixme:module:CreateProcessA (nhldaemn.EXE,...): lpStartupInfo->lpTitle Wine console ignored. Now the actual fixme is probably irrelavant, but this is the only message that comes up about nhldaemn.EXE which is the mail notitier process. This process tries to start and then fails, pops up a message box saying failed to start and goes away. Given that this is a child process is there any way to get debug information for just this child? It would be nice to get this one going properly but Notes is a relatively busy process itself, and trying to disentangle the actions of this child process from everything else going on could be hard work. All in all, Wine and Notes is looking VERY good. Regards David Alexandre Julliard <julliard(a)winehq.com> on 05/03/2001 04:57:28 PM To: David Goodenough/DGA/GB cc: wine-devel(a)winehq.com Subject: Re: wine server protocol error running Notes David.Goodenough(a)dga.co.uk writes: > I am getting an intermittent error when I run Notes under Wine (February > drop). The error I get reads: > > protocol error: 0x8064159: copy_req_path: invalid length 51/0 > > Is this a known problem, if not where do I start looking to try to track > down the problem? A -debugmsg +server,+reg would be a good start. But get the latest Wine version first, there have been some fixes in this area. -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: Text formatting string problem
by Duane Clark 06 May '01

06 May '01

Duane Clark wrote: > Howdy, > > Running a FPGA design tool (Actel's Designer), I find that it works > pretty good, but that certain printed status strings are being formatted > incorrectly. It does not seem to affect the operation of the > application, except for the status reports. > > I further tracked this down to the routine FormatMessageA: > > trace:resource:FormatMessageA > (0xb00,0x400000,16973880,0x400,0x40585e48,512,(nil)) > trace:resource:load_messageA instance = 00400000, id = 01030038, buffer > = (nil), length = 100 > trace:resource:RES_FindResource2 (00400000, 0000000b, 00000001, 0400, W, > PE) > trace:resource:RES_LoadResource (00400000, 0047ba80, PE) > trace:resource:LockResource (00622b88) > trace:resource:load_messageA - strlen=36 > trace:resource:load_messageA instance = 00400000, id = 01030038, buffer > = 0x403eb9a4, length = 37 > trace:resource:RES_FindResource2 (00400000, 0000000b, 00000001, 0400, W, > PE) > trace:resource:RES_LoadResource (00400000, 0047ba80, PE) > trace:resource:LockResource (00622b88) > trace:resource:load_messageA - strlen=36 > trace:string:lstrcpynA (0x403eb9a4, "Opened an existing design %s.\r\n", > 36) > trace:resource:load_messageA 'Opened an existing design %s. > > ' copied ! > trace:resource:FormatMessageA Found a percent. Args = 0 > trace:resource:FormatMessageA Default case > trace:resource:FormatMessageA -- "Opened an existing design s. " > trace:resource:FormatMessageA -- returning 29 > ... It looks like the routine ignores the FORMAT_MESSAGE_IGNORE_INSERTS flag. Sticking an if before the while loop that does the formatting seems to fix things: if (dwFlags & FORMAT_MESSAGE_IGNORE_INSERTS) { while (*f && !eos) { ch = *f++; ADD_TO_T(ch); } } else { /* the rest of this is unchanged */ while (*f && !eos) { if (*f=='%') { ... } I tested this against a half dozen apps, and have not found it to break anything yet. Duane

1 0

mailing list unsubscribe hints ?
by Andreas Mohr 06 May '01

06 May '01

Hi all, several people seem to not be able to unsubscribe from the mailing lists. Don't ask me why they don't make it - I really don't know. After all we've got the mailing list stuff mentioned in a prominent place on the home page and in 7 lines in every mail header. Now I'm asking you: Could we replace the 7 lines in the mail header (that many people using non-"advanced" mail clients will never see anyway, which is why we're always getting these annoying unsubscribe requests) with 1 line at the bottom of each mail body mentioning a URL where you can find all kinds of mailing lists info ? That way maybe they'll finally get it... Anybody against this ? :) -- Andreas Mohr Stauferstr. 6, D-71272 Renningen, Germany Tel. +49 7159 800604 http://home.germany.net/100-30936/

1 0

Loading document problem in word 97
by Alan Gonzalez 05 May '01

05 May '01

Hi, I'm using wine 04/18 release and have been reading the archives pretty constantly and using releases for a while now. This is my first bug report, so be kind! So the system i have is redhat linux 6.2 (2.2.16-3) with lots of upgrades, dual boot with win98 on the other partition. It's mounted in linux at /c. I remember a time when this feature worked ( i can't remember when though) and it hasn't been working since probably the last couple of releases. I can't exactly pinpoint it down because i skipped a couple at the end of 2000. Anyways here's the problem. I can run word 97 fine which is pretty awesome. The basic quick overview of the problem is that i try to open a word document, word then says it can't find it, and then the original file has been renamed to the original name with an additional .doc at the end. so the longer explanation is that i click on File->Open and the file open dialog comes up. I then go to the C: drive and it shows me the files there. Everything looks fine. Now i go and double click on the file and then word pops up a little dialog box and says: This file could not be found. Try one or more of the following: Check the spelling of the name of the document Try a different file name (OLD EXAMS AND ANSWERS.DOC) After this i check the filesystem and see that my file: /c/Old exams and answers.doc has been renamed to: /c/Old exams and answers.doc.doc Now if in the file open dialog i had manually typed in c:\Old exams and answers.doc, then clicked open, word opens the file fine. So it's something in the handling of the double click open. I've never debugged a wine application before, so i just did --debugmsg trace+all and saved it to a file. I then went through this and found some things. This might not be what you need to figure out the problem, but i thought it was kinda interesting. So i can see some calls to the registry for the ".doc" key. I thought this could in some way be related, but who knows: Call advapi32.RegOpenKeyA(80000000,405a1e84 ".doc",405a1fa0) ret=307fa984 tid=08064220 Call ntdll.RtlInitAnsiString(405a1d90,405a1e84 ".doc") ret=407a65eb tid=08064220 Ret ntdll.RtlInitAnsiString() retval=00000005 ret=407a65eb tid=08064220 Call ntdll.RtlAnsiStringToUnicodeString(40114f98,405a1d90,00000000) ret=407a65f4 tid=08064220 Ret ntdll.RtlAnsiStringToUnicodeString() retval=00000000 ret=407a65f4 tid=08064220 Call ntdll.NtOpenKey(405a1fa0,000f003f,405a1d98) ret=407a6607 tid=08064220 trace:reg:NtOpenKey (0x80000000,L".doc",f003f,0x405a1fa0) 08064220: open_key( parent=-2147483648, access=000f003f, name=L".doc" ) Open key \\Machine\\Software\\CLASSES\\.doc 08064220: open_key() = 0 { hkey=404 } Then after this, the next item i see that has my file in it is: Ret user32.SetClassLongA() retval=0000024e ret=30821509 tid=08064220 Call kernel32.GetFileAttributesA(405a1d04 "C:\\Old exams and answers.doc.doc") ret=3071096c tid=08064220 trace:dosfs:DOSFS_GetFullName C:\Old exams and answers.doc.doc (last=1) trace:string:lstrcpynA (0x405a145c, "/c", 1024) trace:dosfs:DOSFS_FindUnixName /c,Old exams and answers.doc.doc trace:heap:HeapAlloc (40350000,00000002,0000022c): returning 403c6ba8 trace:heap:HeapFree (40350000,00000002,403c6ba8): returning TRUE Ret kernel32.GetFileAttributesA() retval=ffffffff ret=3071096c tid=08064220 Call kernel32.GetLastError() ret=3071068e tid=08064220 Ret kernel32.GetLastError() retval=00000002 ret=3071068e tid=08064220 Call user32.SetCursor(0000024e) ret=308214ce tid=08064220 trace:cursor:SetCursor 024e Call x11drv.SetCursor(4038df28) ret=406c15ba tid=08064220 so here we can see that the file is the wrong name. Later on i can actually see the MoveFileA() command be run, which i think is where the file gets renamed: Call kernel32.GetVolumeInformationA(405a1d6c "C:\\",00000000,00000000,00000000,42f2ccd4,00000000,00000000,00000000) ret=30710a2f tid=08064220 Ret kernel32.GetVolumeInformationA() retval=00000001 ret=30710a2f tid=08064220 Call kernel32.TlsGetValue(00000002) ret=30712a81 tid=08064220 Ret kernel32.TlsGetValue() retval=4038f34c ret=30712a81 tid=08064220 Call kernel32.MoveFileA(405a1fa8 "C:\\Old exams and answers.doc",405a21b0 "C:\\Old exams and answers.doc.doc") ret=30751414 tid=08064220 trace:file:MoveFileA (C:\Old exams and answers.doc,C:\Old exams and answers.doc.doc) trace:dosfs:DOSFS_GetFullName C:\Old exams and answers.doc (last=1) trace:string:lstrcpynA (0x405a16f8, "/c", 1024) trace:dosfs:DOSFS_FindUnixName /c,Old exams and answers.doc trace:heap:HeapAlloc (40350000,00000002,0000022c): returning 403c6ba8 trace:dosfs:DOSFS_FindUnixName (/c,Old exams and answers.doc) -> Old exams and answers.doc (OLDEXA~2.DOC) trace:heap:HeapFree (40350000,00000002,403c6ba8): returning TRUE trace:dosfs:DOSFS_GetFullName returning /c/Old exams and answers.doc = C:\OLDEXA~2.DOC trace:dosfs:DOSFS_GetFullName C:\Old exams and answers.doc.doc (last=1) trace:string:lstrcpynA (0x405a0ef4, "/c", 1024) trace:dosfs:DOSFS_FindUnixName /c,Old exams and answers.doc.doc trace:heap:HeapAlloc (40350000,00000002,0000022c): returning 403c6ba8 trace:heap:HeapFree (40350000,00000002,403c6ba8): returning TRUE trace:dosfs:DOSFS_GetFullName C:\Old exams and answers.doc.doc (last=0) trace:string:lstrcpynA (0x405a0ef4, "/c", 1024) trace:dosfs:DOSFS_FindUnixName /c,Old exams and answers.doc.doc trace:heap:HeapAlloc (40350000,00000002,0000022c): returning 403c6ba8 trace:heap:HeapFree (40350000,00000002,403c6ba8): returning TRUE trace:dosfs:DOSFS_GetFullName returning /c/Old exams and answers.doc.doc = C:\old exams and answers.doc.doc Ret kernel32.MoveFileA() retval=00000001 ret=30751414 tid=08064220 This is probably too little information to figure out. Just tell me how i should run word and i'll help in anyway i can. Thanks. Alan Gonzalez __________________________________________________ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/

1 0

Compilation error with cvs sources
by crisper＠optonline.net 05 May '01

05 May '01

I get this error below while trying to compile the winecvs sources. All sources are updated to the current day. I am using gcc-2.96 compiler on a Mandrake system. Winex also fails at the same exact point. If there is something else that I should be attaching to this for information to the developers then please let me know. Thanks, Sean gcc -c -I. -I. -I../include -I../include -g -O2 -Wall -mpreferred-stack-boundary=2 -fPIC -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o ts_shape.o ts_shape.c gcc -c -I. -I. -I../include -I../include -g -O2 -Wall -mpreferred-stack-boundary=2 -fPIC -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o ts_xpm.o ts_xpm.c gcc -shared -Wl,-soname,libwine_tsx11.so -Wl,-rpath,/usr/local/lib locking.o ts_xf86dga.o ts_xf86dga2.o ts_xf86vmode.o ts_xshm.o ts_xlib.o ts_xresource.o ts_xvideo.o ts_xutil.o ts_shape.o ts_xpm.o -o libwine_tsx11.so.1.0 rm -f libwine_tsx11.so && ln -s libwine_tsx11.so.1.0 libwine_tsx11.so make[1]: Leaving directory `/home/crisper/wine/tsx11' make[1]: Entering directory `/home/crisper/wine/dlls' make[2]: Entering directory `/home/crisper/wine/dlls/ntdll' LD_LIBRARY_PATH="../../unicode:$LD_LIBRARY_PATH" ./../tools/winebuild/winebuild -fPIC -L../../dlls -o ntdll.spec.c -spec /ntdll.spec ./../tools/winebuild/winebuild: error while loading shared libraries: unexpected reloc type 0x80 make[2]: *** [ntdll.spec.c] Error 127 make[2]: Leaving directory `/home/crisper/wine/dlls/ntdll' make[1]: *** [ntdll/libntdll.so] Error 2 make[1]: Leaving directory `/home/crisper/wine/dlls' make: *** [dlls] Error 2 Compilation failed, aborting install.

1 0

wine, apihooks, and diablo 2
by Vladimir Vukicevic 05 May '01

05 May '01

Howdy.. I've been trying to get the battle.net aspect of Diablo 2 working with wine in the past few days. I've been attempting to do so with both transgaming's latest winex CVS HEAD and also wine's CVS HEAD, to similar results. As you probably know, right now Diablo 2 runs just dandy assuming you only want to play single-player. There are two ways to play multiplayer: the normal d2 way, executing Diablo II.exe with the D2 Play CD in the CDROM, or using a "no-cd" patch. Neither of these approaches currently work with wine. (Currently, to play, you appear to have to use the "no-cd" patch in any case, but you end up only using half the patch -- I'll explain below.) If I attempt to play with the CD, using "wine -- 'Diablo II.exe'" (with or without -win argument to D2), after a few seconds, the CPU is spiked and no output occurs. Watching a +trace output shows that it is executing Game.exe (the main game driver), but then things go wonky. (Incidentally, I can't figure out how to get a debugmsg flag on processes created from a wine process.. is there a config option?) It certainly hasn't started looking at the cdrom (as per strace). The no-cd case is more interesting. There are typically two parts, one a driver called 'DLoad.exe' and then the game-replacement, called 'game_crk.exe'. To play single player, 'game_crk' can be invoked directly (with a -win arg if necessary), and things work great. However, on attempting to play on battle.net, it complains that it can't recongize the version. This is where DLoad is required. From examining DLoad, it appears to use the ApiHooks toolkit, available at http://www.anticracking.sk/EliCZ . This basically provides the programmer with a simple way to insert his or her own wrapper between an app and functions it calls in a DLL. Simple enough, it seems. However, to do so, it takes advantage of VirtualAllocEx to allocate memory in the target process, which wine seems to not support. (It also calls VirtualAlloc with a flag value of 0x8001000 -- the 0x8000000 part being unknown. I couldn't find any info on MSDN, so I just hacked wine to strip this bit out if it sees it -- anynoe know anything about this?) so, I'm wondering if anyone has any insight or pointers into either of these two issues, or any suggestions on which one would be easiest to tackle. I would prefer to tackle the first one (the with-CD case) initially, as it seems a bit simpler and cleaner. But we'll see. thanks, - Vladimir

1 0

Re: New breakages
by gerard patel 03 May '01

03 May '01

At 08:42 AM 03/05/2001 -0700, you wrote: <snip> > Do you have a backtrace >for the crashes? Not completely, but here is what I can do for now. Note that I am not sure yet that these bugs are not related to the environment (x server, window manager, glibc, etc) Gerard - Crash with Eudora 4 when exiting : Unhandled exception: page fault on read access to 0x00000048 in 32-bit code (0x40a49529). In 32-bit mode. Symbol h_errno is invalid Symbol hack_digit is invalid 0x40a49529 (X11DRV_GetBitmapBits+0x185 [bitmap.c:213]): movl 0x48(%eax),%eax 213 *tbuf |= XGetPixel(image,w,h)<<(7-(w&7)); Wine-dbg>bt bt Backtrace: =>0 0x40a49529 (X11DRV_GetBitmapBits+0x185(bmp=0x403f375c, buffer=0x403f3ae4, count=0x80) [bitmap.c:213]) (ebp=40474298) 1 0x40a49e28 (X11DRV_BitmapBits+0x64(hbitmap=0x21c4, bits=0x403f3ae4, count=0x80, flags=0x2) [bitmap.c:427]) (ebp=404742b8) 2 0x40738a53 (GetBitmapBits+0x15f(hbitmap=0x21c4, count=0x80, bits=0x403f3ae4) [bitmap.c:280]) (ebp=404742e8) 3 0x4069c07a (CURSORICON_CreateFromResource+0x5aa(hInstance=0x0, hObj=0x0, bits=0x406d7380, cbSize=0x2e8, bIcon=0x1, dwVersion=0x30000, width=0x20, height=0x20, loadflags=0x8040) [cursoricon.c:639]) (ebp=40474370) 4 0x4069c3e7 (CURSORICON_Load+0x263(hInstance=0xde, name=0x7f03, width=0x20, height=0x20, colors=0x100, fCursor=0x0, loadflags=0x8040) [cursoricon.c:768]) (ebp=404743c0) 5 0x4069ed17 (LoadImageW+0x12f(hinst=0x0, name=0x7f03, type=0x1, desiredx=0x20, desiredy=0x0, loadflags=0x8040) [cursoricon.c:2263]) (ebp=404743f4) 6 0x4069df80 (LoadIconW+0x28(hInstance=0x0, name=0x7f03) [cursoricon.c:1782]) (ebp=40474418) 7 0x40692fa5 (STATIC_LoadIconW+0x2d(wndPtr=0x40371038, name=0x7f03) [static.c:154]) (ebp=40474430) 8 0x40693292 (StaticWndProc_locked+0x272(wndPtr=0x40371038, uMsg=0x81, wParam=0x0, lParam=0x40474854, unicode=0x1) [static.c:259]) (ebp=40474498) 9 0x406934f1 (StaticWndProcW+0x31(hWnd=0x9dcc, uMsg=0x81, wParam=0x0, lParam=0x40474854) [static.c:376]) (ebp=404744c4) 10 0x406cf237 (WINPROC_wrapper+0x17) (ebp=404744e8) Unhandled exception: page fault on read access to 0x00000048 in 32-bit code (0x40a49529). In 32-bit mode. Symbol h_errno is invalid Symbol hack_digit is invalid 0x40a49529 (X11DRV_GetBitmapBits+0x185 [bitmap.c:213]): movl 0x48(%eax),%eax 213 *tbuf |= XGetPixel(image,w,h)<<(7-(w&7)); >From the code, XGetImage returns 0 (fails). I have tried the obvious --- bitmap.c.orig Mon Jan 15 23:30:51 2001 +++ bitmap.c Fri Apr 27 23:12:27 2001 @@ -194,6 +194,12 @@ image = XGetImage( display, (Pixmap)bmp->physBitmap, 0, 0, bmp->bitmap.bmWidth, bmp->bitmap.bmHeight, AllPlanes, ZPixmap ); + if (!image) + { + wine_tsx11_unlock(); + ERR("XGetImage failed\n"); + return 0; + } bmp->bitmap.bmHeight = old_height; /* copy XImage to 16 bit padded image buffer with real bitsperpixel */ but it failed later. - crash when starting Visual Basic 3 : no backtrace available, the stack is trashed :-/ Here is a trace instead : Call USER.232: SETWINDOWPOS(0x1264,0x0000,0x0245,0x0121,0x00e2,0x00e2,0x0014) ret=0317:13ca ds=043f Call x11drv.SetWindowPos(40756d70) ret=40957c09 tid=081c29b8 trace:win:X11DRV_SetWindowPos hwnd 1264, swp (581,289)-(807,515) flags 00000014 trace:win:X11DRV_SetWindowPos current (0,222)-(180,568), style 86ce0000 CallTo16(func=035f:176c,ds=043f,0x1264,0x0046,0x0000,0x0097,0x009c) ss:sp=043f:8d04 AX=043e BX=0000 CX=0000 DX=0000 SI=0000 DI=0000 BP=8d2e ES=043f FS=0000 Call USER.107: DEFWINDOWPROC(0x1264,0x0046,0x0000,0x0097009c) ret=035f:1d52 ds=043f CallTo16(func=035f:176c,ds=043f,0x1264,0x0024,0x0000,0x0097,0x00c0) ss:sp=043f:8c80 AX=043e BX=0000 CX=0000 DX=0000 SI=0000 DI=0000 BP=8caa ES=043f FS=0000 Call USER.107: DEFWINDOWPROC(0x1264,0x0024,0x0000,0x009700c0) ret=035f:1d52 ds=043f Ret USER.107: DEFWINDOWPROC() retval=0x00000000 ret=035f:1d52 ds=043f CallTo16() ss:sp=043f:8c80 AX=0000 BX=00c0 CX=0000 DX=0000 BP=8caa SP=8c80 trace:win:WINPOS_GetMinMaxInfo 800 600 / 0 0 / 800 600 / 180 112 Ret USER.107: DEFWINDOWPROC() retval=0x00000000 ret=035f:1d52 ds=043f CallTo16() ss:sp=043f:8d04 AX=0000 BX=8d00 CX=0000 DX=0000 BP=8d2e SP=8d04 CallTo16(func=035f:176c,ds=043f,0x1264,0x0083,0x0001,0x0097,0x009c) ss:sp=043f:8d04 AX=043e BX=0000 CX=0000 DX=0000 SI=0000 DI=0000 BP=8d2e ES=043f FS=0000 Call USER.107: DEFWINDOWPROC(0x1264,0x0083,0x0001,0x0097009c) ret=035f:1d52 ds=043f Ret USER.107: DEFWINDOWPROC() retval=0x00000000 ret=035f:1d52 ds=043f CallTo16() ss:sp=043f:8d04 AX=0000 BX=8d00 CX=0000 DX=0000 BP=8d2e SP=8d04 trace:win:WINPOS_SendNCCalcSize 581,289-807,515 trace:event:EVENT_ProcessAllEvents called (thread 81c29b8). trace:event:EVENT_ProcessEvent called. trace:event:EVENT_ProcessEvent Got event ConfigureNotify for hwnd 1264 trace:event:__get_top_decoration 03400430 -> 03400430 trace:event:__get_top_decoration 0340047c -> 020005c6 trace:event:__get_top_decoration 034003fa -> 020005ba trace:win:EVENT_ConfigureNotify 1264 restacking from after 1800 to after 0fd0 Call x11drv.SetWindowPos(40756a78) ret=40957c09 tid=081c29b8 trace:win:X11DRV_SetWindowPos hwnd 1264, swp (581,289)-(807,515) flags 80000013 trace:win:X11DRV_SetWindowPos current (581,289)-(807,515), style 86ce0000 CallTo16(func=035f:176c,ds=043f,0x1264,0x0046,0x0000,0x0097,0x009c) ss:sp=043f:8d04 AX=043e BX=0000 CX=0000 DX=0000 SI=0000 DI=0000 BP=8d2e ES=043f FS=0000 Call USER.107: DEFWINDOWPROC(0x1264,0x0046,0x0000,0x0097009c) ret=035f:1d52 ds=043f Ret USER.107: DEFWINDOWPROC() retval=0x00000000 ret=035f:1d52 ds=043f CallTo16() ss:sp=043f:8d04 AX=0000 BX=8d00 CX=0000 DX=0000 BP=8d2e SP=8d04 warn:win:SWP_DoOwnedPopups (1264) hInsertAfter = 0fd0 Call x11drv.SetWindowPos(407568d0) ret=40957c09 tid=081c29b8 trace:win:X11DRV_SetWindowPos hwnd 1d88, swp (0,0)-(0,0) flags 00002413 trace:win:X11DRV_SetWindowPos current (0,0)-(276,72), style 84000000 warn:win:SWP_DoOwnedPopups (1d88) hInsertAfter = 0fd0 fixme:pthread_kill_other_threads_np (winedbg starting...) 0x003bbdfc: *** Invalid address 0x003bbdfc -- no code -- Wine-dbg>bt bt Backtrace: =>0 0x003bbdfc (ebp=4074f722) Wine-dbg>

1 0

Re: PATCH: glu32 generation
by Alexandre Julliard 03 May '01

03 May '01

Marcus Meissner <marcus(a)jet.franken.de> writes: > Changelog: > Create a GLU32.DLL on compile time by parsing GL/glu.h and > libGLU.so, create an empty one if the latter are not present. It doesn't seem to work here: "nm: /usr/lib/libGLU.so: no symbols". The library is probably stripped. Anyway, is there a reason we cannot ship the generated .spec and .c files like with opengl, instead of having every user re-generate them? It would be much more robust. Also note that a .so file must contain exactly one Win32 dll, so you cannot put glu32.spec inside libopengl32.so, you need a separate libglu32.so. -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: wine server protocol error running Notes
by Alexandre Julliard 03 May '01

03 May '01

David.Goodenough(a)dga.co.uk writes: > I am getting an intermittent error when I run Notes under Wine (February > drop). The error I get reads: > > protocol error: 0x8064159: copy_req_path: invalid length 51/0 > > Is this a known problem, if not where do I start looking to try to track > down the problem? A -debugmsg +server,+reg would be a good start. But get the latest Wine version first, there have been some fixes in this area. -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: New breakages
by Alexandre Julliard 03 May '01

03 May '01

gerard patel <gerard.patel(a)asi.fr> writes: > Excellent, this is fixing the painting problems. > Now, all I have to do is to find the tooltip bug, the Eudora combo display problem > and the 2 remaining crashes and my toy test suite will be in as good shape as > before :-) The tooltip bug will be fixed when I commit the rest of the window management changes, so don't spend time on it. Do you have a backtrace for the crashes? maybe I have already fixed these too. -- Alexandre Julliard julliard(a)winehq.com

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel