On Tue, Mar 9, 2010 at 9:15 AM, Dan Kegel dank@kegel.com wrote:
On Tue, Mar 9, 2010 at 2:58 AM, Roderick Colenbrander thunderbird2k@gmail.com wrote:
I might be able to measure it using my oscilloscope. Somehow I would need to play lets say the left channel 'without' latency and the other channel with and compare the two signals.
Yes, absolutely, but it'd be good to make this measurement easy to repeat by anybody interested. To do that, let's just loop the audio output back into the audio input. The user will have to provide a loopback cable (or, worst case, put his mike right up to the speaker, and allow for a tiny bit of extra latency from that).
If sound travels at 340m/s, then a one-second sample is 340m long. A 1ms delay would therefore be 340mm, or 34 cm. Your mic would have to be *quite* far away from the speakers to have a significant impact on the delay, unless I'm missing something.
Which is good news, I guess, since it means tests are easier. Hope it goes well :)
Have fun,
Avery