On 9/11/21 12:28 AM, Eduard Permyakov wrote:
On 2021-09-08 6:42 p.m., Zhiyi Zhang wrote:
On 9/8/21 1:43 AM, Eduard Permyakov wrote:
Some applications use the EDID property of the monitor device to detect supported resolutions, and set the viewport size. Add a computed EDID to the virtual desktop monitor device to allow the virtual desktop driver to be better compatible with such applications.
Most fields of the EDID contain details that are of no relevance to applications, so populate only the native resolution and physical monitor dimensions. This should cover the vast majority of use cases.
Signed-off-by: Eduard Permyakov epermyakov@codeweavers.com
dlls/winex11.drv/desktop.c | 75 +++++++++++++++++++++++++++++++++++++- 1 file changed, 73 insertions(+), 2 deletions(-)
diff --git a/dlls/winex11.drv/desktop.c b/dlls/winex11.drv/desktop.c index 71b3a0a5a27..37e5624967e 100644 --- a/dlls/winex11.drv/desktop.c +++ b/dlls/winex11.drv/desktop.c @@ -20,6 +20,7 @@ */ #include "config.h" +#include <stdint.h> #include <X11/cursorfont.h> #include <X11/Xlib.h> @@ -111,6 +112,74 @@ static void add_desktop_mode( DEVMODEW *mode, DWORD depth, DWORD width, DWORD he mode->dmDisplayFrequency = 60; } +static void get_virtual_edid( unsigned char **edid, unsigned long *len ) +{ + static const size_t desc_size = 128;
You can remove desc_size entirely and use sizeof(default_edid) instead.
+ int i; + uint8_t accum = 0; + /*Sample EDID for an LCD Desktop IT Display, from VESA spec */ + static const unsigned char default_edid[128] = { + /* Header */ + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + /* Manufacturer's code name */ + 0x04, 0x43, + /* Product code */ + 0x06, 0xf2, + /* Serial Number */ + 0x01, 0x00, 0x00, 0x00, + /* Date of manufacture */ + 0x01, 0x11, + /* EDID version */ + 0x01, 0x04, + /* Standard characteristics */ + 0x0f, 0x2b, 0x20, 0x78, 0x2b, 0x9c, 0x68, 0xa0, + 0x57, 0x4a, 0x9b, 0x26, 0x12, 0x48, 0x4c, 0xff, + 0xff, 0x80, 0xa9, 0x59, 0xa9, 0x4f, 0xa9, 0x4a, + 0xa9, 0x45, 0x81, 0x99, 0x81, 0x80, 0x61, 0x59, + 0x45, 0x59, + /* First 18-byte data block (Preferred Timing Mode) */ + 0x48, 0x3f, 0x40, 0x30, 0x62, 0xb0, 0x32, 0x40, + 0x40, 0xc0, 0x13, 0x00, 0xab, 0x40, 0x11, 0x00, + 0x00, 0x1e, + /* Second 18-byte data block */ + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32, 0x5a, 0x1e, + 0x6e, 0x17, 0x04, 0x11, 0x00, 0xc8, 0x90, 0x00, + 0x50, 0x3c, + /* Third 18-byte data block */ + 0x00, 0x00, 0x00, 0xf7, 0x00, 0x0a, 0xf7, 0x0f, + 0x03, 0x87, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, + /* Fourth 18-byte data block */ + 0x00, 0x00, 0x00, 0xfc, 0x00, 0x41, 0x42, 0x43, + 0x20, 0x4c, 0x43, 0x44, 0x32, 0x31, 0x0a, 0x20, + 0x20, 0x20, + /* Extension flag */ + 0x00, + };
+ *edid = heap_calloc( desc_size, 1 ); + if (!*edid) + { + *len = 0; + return; + }
+ memcpy( *edid, default_edid, sizeof(default_edid) );
You can use sizeof(default_edid) - 1 since you don't need to copy the last byte.
Anyway, I am not feeling comfortable with the current approach for generating fake EDID data. It's not real enough. For example, physical size should reflect the recommended DPI values and the resolution list should match what's reported from EnumDisplaySettings().
In my opinion, you can either generate an EDID by carefully following the VESA EDID standard, or, the other way, which I think it's easier, is to pass the host primary monitor EDID to the virtual desktop by introducing a get_host_primary_monitor_edid(), similar to what get_host_primary_gpu() has done. This way has the benefit of not bothering with the EDID generation and has the same EDID as the host, which can reduce the difference between using virtual desktop and XRandR display device handlers. As for Xinerama, you can leave the EDID empty because Xinerama is rarely used nowadays.
Hi, Zhiyi.
If we are passing the host monitor EDID, then there is little point in using the virtual desktop driver, since the app will not respect the constraints of the user-defined virtual resolution. As well, there could be some inconsistencies between the data derived from the EDID and data queried via APIs which do not rely on the EDID. Also, there can be some confusion with regards to which EDID to use when there are multiple physical monitors present.
Generating EDID bit-by-bit from the spec will require quite a bit of tedious code, and it will not completely eliminate all instances of bogus data. Things like the resolution list have an associated refresh rate associated with the resolution, and it is not obvious what it should be. As well, there is a lot of low-level timing data that will simply have to be made up. Since the app that was the motivation for making this patch ignores most data in the EDID besides a couple of obvious fields, I also have no easy way to test such a change. And I expect that there will pretty much be 0 apps targeting Wine that will actually want to parse the EDID and do something meaningful with the data.
Personally, I think the use case of using the virtual monitor driver with an app that wants to read an EDID is not that important. How about we merge patch 1 and drop patches 2 and 3?
Sure, we can work on it later. I sent a v6 of patch 1 to fix some minor style issue, check NULL before calling XFree() and fix some possible memory leaks.
Thanks, Zhiyi
+ *len = desc_size;
+ /* Set the native resolution in the Preferred Timing Mode descriptor */ + (*edid)[0x38] = max_width & 0xff; + (*edid)[0x3a] = ((max_width >> 8) & 0xf) << 4;
+ (*edid)[0x3b] = max_height & 0xff; + (*edid)[0x3d] = ((max_height >> 8) & 0xf) << 4;
+ /* Set checksum */ + for (i = 0; i < desc_size-1; i++) + accum += (*edid)[i]; + (*edid)[desc_size - 1] = 256 - accum; +}
static BOOL X11DRV_desktop_get_modes( ULONG_PTR id, DWORD flags, DEVMODEW **new_modes, UINT *mode_count ) { UINT depth_idx, size_idx, mode_idx = 0; @@ -265,8 +334,7 @@ static BOOL X11DRV_desktop_get_monitors( ULONG_PTR adapter_id, struct x11drv_mon SetRect( &monitor->rc_work, 0, 0, desktop_width, desktop_height ); query_desktop_work_area( &monitor->rc_work ); monitor->state_flags = DISPLAY_DEVICE_ATTACHED; - monitor->edid_len = 0; - monitor->edid = NULL; + get_virtual_edid( &monitor->edid, &monitor->edid_len ); if (desktop_width && desktop_height) monitor->state_flags |= DISPLAY_DEVICE_ACTIVE; @@ -277,6 +345,9 @@ static BOOL X11DRV_desktop_get_monitors( ULONG_PTR adapter_id, struct x11drv_mon static void X11DRV_desktop_free_monitors( struct x11drv_monitor *monitors, int count ) { + int i; + for (i = 0; i < count; i++) + heap_free( monitors[i].edid ); heap_free( monitors ); }