[PATCH v7 10/26] x86/insn-eval: Add utility functions to get segment selector

[Ricardo Neri]

When computing a linear address and segmentation is used, we need to know
the base address of the segment involved in the computation. In most of
the cases, the segment base address will be zero as in USER_DS/USER32_DS.
However, it may be possible that a user space program defines its own
segments via a local descriptor table. In such a case, the segment base
address may not be zero .Thus, the segment base address is needed to
calculate correctly the linear address.

The segment selector to be used when computing a linear address is
determined by either any of segment override prefixes in the
instruction or inferred from the registers involved in the computation of
the effective address; in that order. Also, there are cases when the
overrides shall be ignored (code segments are always selected by the CS
segment register; string instructions always use the ES segment register
along with the EDI register).

For clarity, this process can be split into two steps: resolving the
relevant segment register to use and, once known, read its value to
obtain the segment selector.

The method to obtain the segment selector depends on several factors. In
32-bit builds, segment selectors are saved into the pt_regs structure
when switching to kernel mode. The same is also true for virtual-8086
mode. In 64-bit builds, segmentation is mostly ignored, except when
running a program in 32-bit legacy mode. In this case, CS and SS can be
obtained from pt_regs. DS, ES, FS and GS can be read directly from
the respective segment registers.

Lastly, the only two segment registers that are not ignored in long mode
are FS and GS. In these two cases, base addresses are obtained from the
respective MSRs.

Cc: Dave Hansen 
Cc: Adam Buchbinder 
Cc: Colin Ian King 
Cc: Lorenzo Stoakes 
Cc: Qiaowei Ren 
Cc: Arnaldo Carvalho de Melo 
Cc: Masami Hiramatsu 
Cc: Adrian Hunter 
Cc: Kees Cook 
Cc: Thomas Garnier 
Cc: Peter Zijlstra 
Cc: Borislav Petkov 
Cc: Dmitry Vyukov 
Cc: Ravi V. Shankar 
Cc: [e-mail]
Signed-off-by: Ricardo Neri 
---
 arch/x86/lib/insn-eval.c | 256 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 256 insertions(+)

diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index 1634762..0a496f4 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -9,6 +9,7 @@
 #include <asm/inat.h>
 #include <asm/insn.h>
 #include <asm/insn-eval.h>
+#include <asm/vm86.h>

enum reg_type {
    REG_TYPE_RM = 0,
@@ -33,6 +34,17 @@ enum string_instruction {
    SCASW_SCASD	= 0xaf,
 };

+enum segment_register {
+	SEG_REG_INVAL = -1,
+	SEG_REG_IGNORE = 0,
+	SEG_REG_CS = 0x23,
+	SEG_REG_SS = 0x36,
+	SEG_REG_DS = 0x3e,
+	SEG_REG_ES = 0x26,
+	SEG_REG_FS = 0x64,
+	SEG_REG_GS = 0x65,
+};
+
 /**
  * is_string_instruction - Determine if instruction is a string instruction
  * @insn:	Instruction structure containing the opcode
@@ -83,6 +95,250 @@ static bool is_string_instruction(struct insn *insn)
    }
 }

+/**
+ * resolve_seg_register() - obtain segment register
+ * @insn:	Instruction structure with segment override prefixes
+ * @regs:	Structure with register values as seen when entering kernel mode
+ * @regoff:	Operand offset, in pt_regs, used to deterimine segment register
+ *
+ * The segment register to which an effective address refers depends on
+ * a) whether segment override prefixes must be ignored: always use CS when
+ * the register is (R|E)IP; always use ES when operand register is (E)DI with
+ * string instructions as defined in the Intel documentation. b) If segment
+ * overrides prefixes are used in the instruction instruction prefixes. C) Use
+ * the default segment register associated with the operand register.
+ *
+ * The operand register, regoff, is represented as the offset from the base of
+ * pt_regs. Also, regoff can be -EDOM for cases in which registers are not
+ * used as operands (e.g., displacement-only memory addressing).
+ *
+ * This function returns the segment register as value from an enumeration
+ * as per the conditions described above. Please note that this function
+ * does not return the value in the segment register (i.e., the segment
+ * selector). The segment selector needs to be obtained using
+ * get_segment_selector() and passing the segment register resolved by
+ * this function.
+ *
+ * Return: Enumerated segment register to use, among CS, SS, DS, ES, FS, GS,
+ * ignore (in 64-bit mode as applicable), or -EINVAL in case of error.
+ */
+static enum segment_register resolve_seg_register(struct insn *insn,
+						  struct pt_regs *regs,
+						  int regoff)
+{
+	int i;
+	int sel_overrides = 0;
+	int seg_register = SEG_REG_IGNORE;
+
+	if (!insn)
+		return SEG_REG_INVAL;
+
+	/* First handle cases when segment override prefixes must be ignored */
+	if (regoff == offsetof(struct pt_regs, ip)) {
+		if (user_64bit_mode(regs))
+			return SEG_REG_IGNORE;
+		else
+			return SEG_REG_CS;
+		return SEG_REG_CS;
+	}
+
+	/*
+	 * If the (E)DI register is used with string instructions, the ES
+	 * segment register is always used.
+	 */
+	if ((regoff == offsetof(struct pt_regs, di)) &&
+	    is_string_instruction(insn)) {
+		if (user_64bit_mode(regs))
+			return SEG_REG_IGNORE;
+		else
+			return SEG_REG_ES;
+		return SEG_REG_CS;
+	}
+
+	/* Then check if we have segment overrides prefixes*/
+	for (i = 0; i < insn->prefixes.nbytes; i++) {
+		switch (insn->prefixes.bytes[i]) {
+		case SEG_REG_CS:
+			seg_register = SEG_REG_CS;
+			sel_overrides++;
+			break;
+		case SEG_REG_SS:
+			seg_register = SEG_REG_SS;
+			sel_overrides++;
+			break;
+		case SEG_REG_DS:
+			seg_register = SEG_REG_DS;
+			sel_overrides++;
+			break;
+		case SEG_REG_ES:
+			seg_register = SEG_REG_ES;
+			sel_overrides++;
+			break;
+		case SEG_REG_FS:
+			seg_register = SEG_REG_FS;
+			sel_overrides++;
+			break;
+		case SEG_REG_GS:
+			seg_register = SEG_REG_GS;
+			sel_overrides++;
+			break;
+		default:
+			return SEG_REG_INVAL;
+		}
+	}
+
+	/*
+	 * Having more than one segment override prefix leads to undefined
+	 * behavior. If this is the case, return with error.
+	 */
+	if (sel_overrides > 1)
+		return SEG_REG_INVAL;
+
+	if (sel_overrides == 1) {
+		/*
+		 * If in long mode all segment registers but FS and GS are
+		 * ignored.
+		 */
+		if (user_64bit_mode(regs) && !(seg_register == SEG_REG_FS ||
+					       seg_register == SEG_REG_GS))
+			return SEG_REG_IGNORE;
+
+		return seg_register;
+	}
+
+	/* In long mode, all segment registers except FS and GS are ignored */
+	if (user_64bit_mode(regs))
+		return SEG_REG_IGNORE;
+
+	/*
+	 * Lastly, if no segment overrides were found, determine the default
+	 * segment register as described in the Intel documentation: SS for
+	 * (E)SP or (E)BP. DS for all data references, AX, CX and DX are not
+	 * valid register operands in 16-bit address encodings.
+	 * -EDOM is reserved to identify for cases in which no register is used
+	 * the default segment register (displacement-only addressing). The
+	 * default segment register used in these cases is DS.
+	 */
+
+	switch (regoff) {
+	case offsetof(struct pt_regs, ax):
+		/* fall through */
+	case offsetof(struct pt_regs, cx):
+		/* fall through */
+	case offsetof(struct pt_regs, dx):
+		if (insn && insn->addr_bytes == 2)
+			return SEG_REG_INVAL;
+	case offsetof(struct pt_regs, di):
+		/* fall through */
+	case -EDOM:
+		/* fall through */
+	case offsetof(struct pt_regs, bx):
+		/* fall through */
+	case offsetof(struct pt_regs, si):
+		return SEG_REG_DS;
+	case offsetof(struct pt_regs, bp):
+		/* fall through */
+	case offsetof(struct pt_regs, sp):
+		return SEG_REG_SS;
+	case offsetof(struct pt_regs, ip):
+		return SEG_REG_CS;
+	default:
+		return SEG_REG_INVAL;
+	}
+}
+
+/**
+ * get_segment_selector() - obtain segment selector
+ * @regs:	Structure with register values as seen when entering kernel mode
+ * @seg_reg:	Segment register to use
+ *
+ * Obtain the segment selector from any of the CS, SS, DS, ES, FS, GS segment
+ * registers. In CONFIG_X86_32, the segment is obtained from either pt_regs or
+ * kernel_vm86_regs as applicable. In CONFIG_X86_64, CS and SS are obtained
+ * from pt_regs. DS, ES, FS and GS are obtained by reading the actual CPU
+ * registers. This done for only for completeness as in CONFIG_X86_64 segment
+ * registers are ignored.
+ *
+ * Return: Value of the segment selector, including null when running in
+ * long mode. -1 on error.
+ */
+static unsigned short get_segment_selector(struct pt_regs *regs,
+					   enum segment_register seg_reg)
+{
+#ifdef CONFIG_X86_64
+	unsigned short sel;
+
+	switch (seg_reg) {
+	case SEG_REG_IGNORE:
+		return 0;
+	case SEG_REG_CS:
+		return (unsigned short)(regs->cs & 0xffff);
+	case SEG_REG_SS:
+		return (unsigned short)(regs->ss & 0xffff);
+	case SEG_REG_DS:
+		savesegment(ds, sel);
+		return sel;
+	case SEG_REG_ES:
+		savesegment(es, sel);
+		return sel;
+	case SEG_REG_FS:
+		savesegment(fs, sel);
+		return sel;
+	case SEG_REG_GS:
+		savesegment(gs, sel);
+		return sel;
+	default:
+		return -1;
+	}
+#else /* CONFIG_X86_32 */
+	struct kernel_vm86_regs *vm86regs = (struct kernel_vm86_regs *)regs;
+
+	if (v8086_mode(regs)) {
+		switch (seg_reg) {
+		case SEG_REG_CS:
+			return (unsigned short)(regs->cs & 0xffff);
+		case SEG_REG_SS:
+			return (unsigned short)(regs->ss & 0xffff);
+		case SEG_REG_DS:
+			return vm86regs->ds;
+		case SEG_REG_ES:
+			return vm86regs->es;
+		case SEG_REG_FS:
+			return vm86regs->fs;
+		case SEG_REG_GS:
+			return vm86regs->gs;
+		case SEG_REG_IGNORE:
+			/* fall through */
+		default:
+			return -1;
+		}
+	}
+
+	switch (seg_reg) {
+	case SEG_REG_CS:
+		return (unsigned short)(regs->cs & 0xffff);
+	case SEG_REG_SS:
+		return (unsigned short)(regs->ss & 0xffff);
+	case SEG_REG_DS:
+		return (unsigned short)(regs->ds & 0xffff);
+	case SEG_REG_ES:
+		return (unsigned short)(regs->es & 0xffff);
+	case SEG_REG_FS:
+		return (unsigned short)(regs->fs & 0xffff);
+	case SEG_REG_GS:
+		/*
+		 * GS may or may not be in regs as per CONFIG_X86_32_LAZY_GS.
+		 * The macro below takes care of both cases.
+		 */
+		return get_user_gs(regs);
+	case SEG_REG_IGNORE:
+		/* fall through */
+	default:
+		return -1;
+	}
+#endif /* CONFIG_X86_64 */
+}
+
 static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
    		  enum reg_type type)
 {