Oi Miguel,
I had similar problems with serial printers and wine. However, I think it is not related to signaling.
The printers are Itautec fiscal printers. Which one are you using?
I don't think it is related to signaling because it used to work with wine.
Until sometime around 20001026 the printer worked fine. After this there was a major serial recoding in wine which broke the serial support (for the printer at least).
I do use wine-20001026 and it works great with the windows driver (printing from a windows application).
I put an rpm wine in http://www.dias.com.br/RPMS/wine/wine-20001026-1cl.i386.rpm It is from an old Conectiva Linux, but should be compatible with any distribution. Just make sure no other wine is installed in the system.
Can you test this wine version (or build the on from the sources if you wish) ?
If it works, then there might be a chance for the wine serial support to get revised :D
What I really miss from the current tree is the client side fonts, as the fonts looks really awful in that program with 20001026.
Regards,
Raul Dias
lists@vmn.com.br wrote:
Hello All,
Last week I sent an email about a problem with a serial printer that used DTS/DTR hardware flow control. I later understood that DTS/DTR was not supported in linux , and therefore not in wine. Linux [and wine] support RTS/CTS hardware flow control.
Since the protocols are similar, an ideia that I received was to construct a cable that made the computer think it was using RTS/CTS and the printer think it was using DTR/DTS.
Today, I received the cable from the printer manufacturer and the initial tests with wine/linux worked.
RTS - Ready To Send CTS - Clear To Send
DTR - Data Terminal Ready DSR - Data Set Ready
Here is a snippet of mytestapp --debugmsg +comm
trace:comm:COMM_Init COM1 = /dev/ttyS0 trace:comm:COMM_Init LPT1 = /dev/lp0 trace:comm:COMM_Init COM2 = /dev/ttyS1 trace:comm:COMM_Init COM3 = /dev/ttyS2 trace:comm:COMM_Init COM4 = /dev/modem trace:comm:BuildCommDCBAndTimeoutsA (COM2:9600,N,8,1,0x4002af48,(nil)) trace:comm:COMM_BuildOldCommDCB (COM2:9600,N,8,1), ptr 0x4002af48 trace:comm:COMM_BuildOldCommDCB baudrate (9600) trace:comm:COMM_BuildOldCommDCB parity (N) trace:comm:COMM_BuildOldCommDCB charsize (8) trace:comm:COMM_BuildOldCommDCB stopbits (1) trace:comm:SetCommState handle 52, ptr 0x4002af48 trace:comm:SetCommState bytesize 8 baudrate 9600 fParity 0 Parity 0 stopbits 1 trace:comm:SetCommState ~IXON ~IXOFF trace:comm:SetCommState CRTSCTS trace:comm:SetCommMask handle 52, mask 10
Thanks every one from wine-devel for all the prompt answers I received.
Miguel Feitosa
This mail sent through IMP: webmail.vmn.com.br