Signed-off-by: Zhiyi Zhang zzhang@codeweavers.com --- dlls/dxgi/tests/dxgi.c | 279 ++++++++++++++++++++++++++--------------- 1 file changed, 175 insertions(+), 104 deletions(-)
diff --git a/dlls/dxgi/tests/dxgi.c b/dlls/dxgi/tests/dxgi.c index 5af2104bb1a..a9f9b715702 100644 --- a/dlls/dxgi/tests/dxgi.c +++ b/dlls/dxgi/tests/dxgi.c @@ -2022,7 +2022,7 @@ static HMONITOR get_primary_if_right_side_secondary(const DXGI_OUTPUT_DESC *outp
static void test_get_containing_output(void) { - unsigned int output_count, output_idx; + unsigned int adapter_idx, output_idx, output_count; DXGI_SWAP_CHAIN_DESC swapchain_desc; IDXGIOutput *output, *output2; DXGI_OUTPUT_DESC output_desc; @@ -2035,6 +2035,7 @@ static void test_get_containing_output(void) unsigned int i, j; HMONITOR monitor; HMONITOR primary; + BOOL fullscreen; ULONG refcount; HRESULT hr; BOOL ret; @@ -2075,6 +2076,7 @@ static void test_get_containing_output(void) IDXGIOutput_Release(output); ++output_count; } + IDXGIAdapter_Release(adapter);
hr = IDXGIFactory_CreateSwapChain(factory, (IUnknown *)device, &swapchain_desc, &swapchain); ok(SUCCEEDED(hr), "CreateSwapChain failed, hr %#x.\n", hr); @@ -2092,7 +2094,6 @@ static void test_get_containing_output(void) if (hr == DXGI_ERROR_UNSUPPORTED) { win_skip("GetContainingOutput() not supported.\n"); - IDXGISwapChain_Release(swapchain); goto done; }
@@ -2119,118 +2120,188 @@ static void test_get_containing_output(void)
primary = get_primary_if_right_side_secondary(&output_desc);
- output_idx = 0; - while ((hr = IDXGIAdapter_EnumOutputs(adapter, output_idx, &output)) != DXGI_ERROR_NOT_FOUND) + for (adapter_idx = 0; SUCCEEDED(IDXGIFactory_EnumAdapters(factory, adapter_idx, &adapter)); + ++adapter_idx) { - ok(SUCCEEDED(hr), "Failed to enumerate output %u, hr %#x.\n", output_idx, hr); - - hr = IDXGIOutput_GetDesc(output, &output_desc); - ok(SUCCEEDED(hr), "GetDesc failed, hr %#x.\n", hr); - - /* Move the OutputWindow to the current output. */ - ret = SetWindowPos(swapchain_desc.OutputWindow, 0, - output_desc.DesktopCoordinates.left, output_desc.DesktopCoordinates.top, - 0, 0, SWP_NOSIZE | SWP_NOZORDER); - ok(ret, "SetWindowPos failed.\n"); - - hr = IDXGISwapChain_GetContainingOutput(swapchain, &output2); - ok(SUCCEEDED(hr), "GetContainingOutput failed, hr %#x.\n", hr); - - check_output_equal(output, output2); - - refcount = IDXGIOutput_Release(output2); - ok(!refcount, "IDXGIOutput has %u references left.\n", refcount); - refcount = IDXGIOutput_Release(output); - ok(!refcount, "IDXGIOutput has %u references left.\n", refcount); - ++output_idx; - - /* Move the OutputWindow around the corners of the current output desktop coordinates. */ - for (i = 0; i < 4; ++i) + for (output_idx = 0; SUCCEEDED(IDXGIAdapter_EnumOutputs(adapter, output_idx, &output)); + ++output_idx) { - static const POINT offsets[] = - { - { 0, 0}, - {-49, 0}, {-50, 0}, {-51, 0}, - { 0, -49}, { 0, -50}, { 0, -51}, - {-49, -49}, {-50, -49}, {-51, -49}, - {-49, -50}, {-50, -50}, {-51, -50}, - {-49, -51}, {-50, -51}, {-51, -51}, - }; - unsigned int x = 0, y = 0; - - switch (i) - { - case 0: - x = output_desc.DesktopCoordinates.left; - y = output_desc.DesktopCoordinates.top; - break; - case 1: - x = output_desc.DesktopCoordinates.right; - y = output_desc.DesktopCoordinates.top; - break; - case 2: - x = output_desc.DesktopCoordinates.right; - y = output_desc.DesktopCoordinates.bottom; - break; - case 3: - x = output_desc.DesktopCoordinates.left; - y = output_desc.DesktopCoordinates.bottom; - break; - } - - for (j = 0; j < ARRAY_SIZE(offsets); ++j) - { - unsigned int idx = ARRAY_SIZE(offsets) * i + j; - assert(idx < ARRAY_SIZE(points)); - points[idx].x = x + offsets[j].x; - points[idx].y = y + offsets[j].y; - } - } - - for (i = 0; i < ARRAY_SIZE(points); ++i) - { - ret = SetWindowPos(swapchain_desc.OutputWindow, 0, points[i].x, points[i].y, - 0, 0, SWP_NOSIZE | SWP_NOZORDER); - ok(ret, "Failed to set window position.\n"); - - monitor = MonitorFromWindow(swapchain_desc.OutputWindow, MONITOR_DEFAULTTONEAREST); - ok(!!monitor, "Failed to get monitor from window.\n"); - - monitor_info.cbSize = sizeof(monitor_info); - ret = GetMonitorInfoW(monitor, (MONITORINFO *)&monitor_info); - ok(ret, "Failed to get monitor info.\n"); - - hr = IDXGISwapChain_GetContainingOutput(swapchain, &output); - /* Hack to prevent test failures with secondary on the right until multi-monitor support is improved. */ - todo_wine_if(primary && monitor != primary) - ok(hr == S_OK || broken(hr == DXGI_ERROR_UNSUPPORTED), - "Failed to get containing output, hr %#x.\n", hr); - if (hr != S_OK) - continue; - ok(!!output, "Got unexpected containing output %p.\n", output); hr = IDXGIOutput_GetDesc(output, &output_desc); - ok(hr == S_OK, "Failed to get output desc, hr %#x.\n", hr); - refcount = IDXGIOutput_Release(output); - ok(!refcount, "IDXGIOutput has %u references left.\n", refcount); + ok(SUCCEEDED(hr), "Adapter %u output %u: GetDesc failed, hr %#x.\n", adapter_idx, + output_idx, hr);
- ok(!lstrcmpW(output_desc.DeviceName, monitor_info.szDevice), - "Got unexpected device name %s, expected %s.\n", - wine_dbgstr_w(output_desc.DeviceName), wine_dbgstr_w(monitor_info.szDevice)); - ok(EqualRect(&output_desc.DesktopCoordinates, &monitor_info.rcMonitor), - "Got unexpected desktop coordinates %s, expected %s.\n", - wine_dbgstr_rect(&output_desc.DesktopCoordinates), - wine_dbgstr_rect(&monitor_info.rcMonitor)); + /* Move the OutputWindow to the current output. */ + ret = SetWindowPos(swapchain_desc.OutputWindow, 0, output_desc.DesktopCoordinates.left, + output_desc.DesktopCoordinates.top, 0, 0, SWP_NOSIZE | SWP_NOZORDER); + ok(ret, "Adapter %u output %u: SetWindowPos failed.\n", adapter_idx, output_idx); + + hr = IDXGISwapChain_GetContainingOutput(swapchain, &output2); + if (FAILED(hr)) + { + win_skip("Adapter %u output %u: GetContainingOutput failed, hr %#x.\n", + adapter_idx, output_idx, hr); + IDXGIOutput_Release(output); + continue; + } + + check_output_equal(output, output2); + + refcount = IDXGIOutput_Release(output2); + ok(!refcount, "Adapter %u output %u: IDXGIOutput has %u references left.\n", + adapter_idx, output_idx, refcount); + + /* Move the OutputWindow around the corners of the current output desktop coordinates. */ + for (i = 0; i < 4; ++i) + { + static const POINT offsets[] = + { + { 0, 0}, + {-49, 0}, {-50, 0}, {-51, 0}, + { 0, -49}, { 0, -50}, { 0, -51}, + {-49, -49}, {-50, -49}, {-51, -49}, + {-49, -50}, {-50, -50}, {-51, -50}, + {-49, -51}, {-50, -51}, {-51, -51}, + }; + unsigned int x = 0, y = 0; + + switch (i) + { + case 0: + x = output_desc.DesktopCoordinates.left; + y = output_desc.DesktopCoordinates.top; + break; + case 1: + x = output_desc.DesktopCoordinates.right; + y = output_desc.DesktopCoordinates.top; + break; + case 2: + x = output_desc.DesktopCoordinates.right; + y = output_desc.DesktopCoordinates.bottom; + break; + case 3: + x = output_desc.DesktopCoordinates.left; + y = output_desc.DesktopCoordinates.bottom; + break; + } + + for (j = 0; j < ARRAY_SIZE(offsets); ++j) + { + unsigned int idx = ARRAY_SIZE(offsets) * i + j; + assert(idx < ARRAY_SIZE(points)); + points[idx].x = x + offsets[j].x; + points[idx].y = y + offsets[j].y; + } + } + + for (i = 0; i < ARRAY_SIZE(points); ++i) + { + ret = SetWindowPos(swapchain_desc.OutputWindow, 0, points[i].x, points[i].y, + 0, 0, SWP_NOSIZE | SWP_NOZORDER); + ok(ret, "Adapter %u output %u point %u: Failed to set window position.\n", + adapter_idx, output_idx, i); + + monitor = MonitorFromWindow(swapchain_desc.OutputWindow, MONITOR_DEFAULTTONEAREST); + ok(!!monitor, "Adapter %u output %u point %u: Failed to get monitor from window.\n", + adapter_idx, output_idx, i); + + monitor_info.cbSize = sizeof(monitor_info); + ret = GetMonitorInfoW(monitor, (MONITORINFO *)&monitor_info); + ok(ret, "Adapter %u output %u point %u: Failed to get monitor info.\n", adapter_idx, + output_idx, i); + + hr = IDXGISwapChain_GetContainingOutput(swapchain, &output2); + /* Hack to prevent test failures with secondary on the right until multi-monitor support is improved. */ + todo_wine_if(primary && monitor != primary) + ok(hr == S_OK || broken(hr == DXGI_ERROR_UNSUPPORTED), + "Adapter %u output %u point %u: Failed to get containing output, hr %#x.\n", + adapter_idx, output_idx, i, hr); + if (hr != S_OK) + continue; + ok(!!output2, "Adapter %u output %u point %u: Got unexpected containing output %p.\n", + adapter_idx, output_idx, i, output2); + hr = IDXGIOutput_GetDesc(output2, &output_desc); + ok(hr == S_OK, "Adapter %u output %u point %u: Failed to get output desc, hr %#x.\n", + adapter_idx, output_idx, i, hr); + refcount = IDXGIOutput_Release(output2); + ok(!refcount, "Adapter %u output %u point %u: IDXGIOutput has %u references left.\n", + adapter_idx, output_idx, i, refcount); + + ok(!lstrcmpW(output_desc.DeviceName, monitor_info.szDevice), + "Adapter %u output %u point %u: Got unexpected device name %s, expected %s.\n", + adapter_idx, output_idx, i, wine_dbgstr_w(output_desc.DeviceName), + wine_dbgstr_w(monitor_info.szDevice)); + ok(EqualRect(&output_desc.DesktopCoordinates, &monitor_info.rcMonitor), + "Adapter %u output %u point %u: Expect desktop coordinates %s, got %s.\n", + adapter_idx, output_idx, i, + wine_dbgstr_rect(&output_desc.DesktopCoordinates), + wine_dbgstr_rect(&monitor_info.rcMonitor)); + } + IDXGIOutput_Release(output); } + IDXGIAdapter_Release(adapter); }
- refcount = IDXGISwapChain_Release(swapchain); - ok(!refcount, "IDXGISwapChain has %u references left.\n", refcount); + /* Test GetContainingOutput with a full screen swapchain. The containing output should stay + * the same even if the device window is moved */ + hr = IDXGISwapChain_SetFullscreenState(swapchain, TRUE, NULL); + if (FAILED(hr)) + { + skip("SetFullscreenState failed, hr %#x.\n", hr); + goto done; + } + + hr = IDXGISwapChain_GetContainingOutput(swapchain, &output2); + if (FAILED(hr)) + { + win_skip("GetContainingOutput failed, hr %#x.\n", hr); + IDXGISwapChain_SetFullscreenState(swapchain, FALSE, NULL); + goto done; + } + + for (adapter_idx = 0; SUCCEEDED(IDXGIFactory_EnumAdapters(factory, adapter_idx, &adapter)); + ++adapter_idx) + { + for (output_idx = 0; SUCCEEDED(IDXGIAdapter_EnumOutputs(adapter, output_idx, &output)); + ++output_idx) + { + hr = IDXGIOutput_GetDesc(output, &output_desc); + ok(hr == S_OK, "Adapter %u output %u: GetDesc failed, hr %#x.\n", adapter_idx, + output_idx, hr); + IDXGIOutput_Release(output); + + /* Move the OutputWindow to the current output. */ + ret = SetWindowPos(swapchain_desc.OutputWindow, 0, output_desc.DesktopCoordinates.left, + output_desc.DesktopCoordinates.top, 0, 0, SWP_NOSIZE | SWP_NOZORDER); + ok(ret, "Adapter %u output %u: SetWindowPos failed.\n", adapter_idx, output_idx); + + hr = IDXGISwapChain_GetFullscreenState(swapchain, &fullscreen, &output); + ok(hr == S_OK, "Adapter %u output %u: GetFullscreenState failed, hr %#x.\n", + adapter_idx, output_idx, hr); + ok(fullscreen, "Adapter %u output %u: Expect swapchain full screen.\n", adapter_idx, + output_idx); + ok(output == output2, "Adapter %u output %u: Expect output %p, got %p.\n", + adapter_idx, output_idx, output2, output); + IDXGIOutput_Release(output); + + hr = IDXGISwapChain_GetContainingOutput(swapchain, &output); + ok(hr == S_OK, "Adapter %u output %u: GetContainingOutput failed, hr %#x.\n", + adapter_idx, output_idx, hr); + ok(output == output2, "Adapter %u output %u: Expect output %p, got %p.\n", + adapter_idx, output_idx, output2, output); + IDXGIOutput_Release(output); + } + IDXGIAdapter_Release(adapter); + } + + IDXGIOutput_Release(output2); + hr = IDXGISwapChain_SetFullscreenState(swapchain, FALSE, NULL); + ok(hr == S_OK, "SetFullscreenState failed, hr %#x.\n", hr);
done: + refcount = IDXGISwapChain_Release(swapchain); + ok(!refcount, "IDXGISwapChain has %u references left.\n", refcount); refcount = IDXGIDevice_Release(device); ok(!refcount, "Device has %u references left.\n", refcount); - refcount = IDXGIAdapter_Release(adapter); - ok(!refcount, "Adapter has %u references left.\n", refcount); refcount = IDXGIFactory_Release(factory); ok(!refcount, "Factory has %u references left.\n", refcount); DestroyWindow(swapchain_desc.OutputWindow); @@ -6594,7 +6665,6 @@ START_TEST(dxgi) queue_test(test_parents); queue_test(test_output); queue_test(test_find_closest_matching_mode); - queue_test(test_get_containing_output); queue_test(test_resize_target_wndproc); queue_test(test_create_factory); queue_test(test_private_data); @@ -6610,6 +6680,7 @@ START_TEST(dxgi) test_default_fullscreen_target_output(); test_inexact_modes(); test_gamma_control(); + test_get_containing_output(); test_multi_adapter(); test_swapchain_parameters(); test_swapchain_window_messages();
Hi,
While running your changed tests, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check?
Full results can be found at: https://testbot.winehq.org/JobDetails.pl?Key=71339
Your paranoid android.
=== w1064v1809_zh_CN (32 bit report) ===
dxgi: dxgi.c:2571: Test failed: Got unexpected hr 0x887a0022. dxgi.c:2574: Test failed: Got unexpected fullscreen 0. dxgi.c:2577: Test failed: Got unexpected hr 0x887a0022. dxgi.c:2580: Test failed: Got unexpected fullscreen 0.
=== w1064v1809 (64 bit report) ===
dxgi: dxgi.c:5369: Test failed: Got unexpected message 0x31f, hwnd 00000000000F02B8, wparam 0x1, lparam 0.
-
Henri Verbeet -
Marvin -
Zhiyi Zhang