I don't think this should be committed so late in the release cycle, but the work others have been doing with point checking functions inspired me to move on this, and I wanted to let folks know what I'm thinking about and get some feedback. Consider it a proof of concept for now.
The problem: GdipGetRegionHRgn is expensive. Regardless of how much of the region we actually care about, we must rasterize the entire plane of that region. Currently, we rely on gdi32 to do this, which doesn't provide us with any way to ask for a smaller area. This has been a real problem for applications that work with very large, non-rectangular regions or paths.
So it seems to me, the solution will involve writing two functions, one of which is in this MR: a bounding-box calculation for regions, and rasterization. Since the result of rasterization will be short-lived, I think it should always be an array of bytes (which are effectively a bitmap but don't require bitwise operations to work with). The rasterization should be limited to a specific integer rectangle, which in the case of GdipIsVisibleRegionPoint can be 1x1 pixel. We should then be able to eliminate all internal uses of GdipGetRegionHRgn, except when we have to return an HRGN to the application.
This would also be useful for implementing anti-aliasing, as we could keep the memory usage down by only rasterizing the part we need for each scanline at a time.
My current concerns about what I've written so far: * Although it shouldn't change the behavior, I doubt it's adequately tested, even including the Mono tests. I'd like to ideally test every combine mode in a variety of cases. * This is too clever for its own good. Unfortunately, with the complexity of handling so many combine modes as well as infinities for each region being combined, I think the only available choices are "too clever for its own good" and "20 different special cases that need to be considered manually". Still, I want to make this as simple and easy to follow as possible, within its requirements.
-- v2: gdiplus: Check bounding box in GdipIsVisibleRegionPoint.
From: Esme Povirk esme@codeweavers.com
--- dlls/gdiplus/region.c | 218 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 217 insertions(+), 1 deletion(-)
diff --git a/dlls/gdiplus/region.c b/dlls/gdiplus/region.c index d0d9f4ba54e..65675865a9f 100644 --- a/dlls/gdiplus/region.c +++ b/dlls/gdiplus/region.c @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA */
+#include <assert.h> #include <stdarg.h>
#include "windef.h" @@ -1306,6 +1307,208 @@ GpStatus WINGDIPAPI GdipIsVisibleRegionRectI(GpRegion* region, INT x, INT y, INT return GdipIsVisibleRegionRect(region, (REAL)x, (REAL)y, (REAL)w, (REAL)h, graphics, res); }
+/* get_region_bounding_box + * + * Returns a box guaranteed to enclose the entire region, but not guaranteed to be minimal. + * Sets "empty" if bounding box is empty. + * Sets "infinite" if everything outside bounding box is inside the region. + * In the infinite case, the bounding box encloses all points not in the region. */ +static void get_region_bounding_box(struct region_element *element, + REAL *min_x, REAL *min_y, REAL *max_x, REAL *max_y, BOOL *empty, BOOL *infinite) +{ + REAL left_min_x, left_min_y, left_max_x, left_max_y; + BOOL left_empty, left_infinite; + REAL right_min_x, right_min_y, right_max_x, right_max_y; + BOOL right_empty, right_infinite; + /* For combine modes, we convert the mode to flags as follows to simplify the logic: + * 0x8 = point in combined region if it's in both + * 0x4 = point in combined region if it's in left and not right + * 0x2 = point in combined region if it's not in left and is in right + * 0x1 = point in combined region if it's in neither region */ + int flags; + const int combine_mode_flags[] = { + 0xa, /* CombineModeReplace - shouldn't be used */ + 0x8, /* CombineModeIntersect */ + 0xe, /* CombineModeUnion */ + 0x6, /* CombineModeXor */ + 0x4, /* CombineModeExclude */ + 0x2, /* CombineModeComplement */ + }; + + /* handle unit elements first */ + switch (element->type) + { + case RegionDataInfiniteRect: + *min_x = *min_y = *max_x = *max_y = 0.0; + *empty = TRUE; + *infinite = TRUE; + return; + case RegionDataEmptyRect: + *min_x = *min_y = *max_x = *max_y = 0.0; + *empty = TRUE; + *infinite = FALSE; + return; + case RegionDataPath: + { + GpPath *path = element->elementdata.path; + int i; + + if (path->pathdata.Count <= 1) { + *min_x = *min_y = *max_x = *max_y = 0.0; + *empty = TRUE; + *infinite = FALSE; + return; + } + + *min_x = *max_x = path->pathdata.Points[0].X; + *min_y = *max_y = path->pathdata.Points[0].Y; + *empty = FALSE; + *infinite = FALSE; + + for (i=1; i < path->pathdata.Count; i++) + { + if (path->pathdata.Points[i].X < *min_x) + *min_x = path->pathdata.Points[i].X; + else if (path->pathdata.Points[i].X > *max_x) + *max_x = path->pathdata.Points[i].X; + if (path->pathdata.Points[i].Y < *min_y) + *min_y = path->pathdata.Points[i].Y; + else if (path->pathdata.Points[i].Y > *max_y) + *max_y = path->pathdata.Points[i].Y; + } + + return; + } + case RegionDataRect: + *min_x = element->elementdata.rect.X; + *min_y = element->elementdata.rect.Y; + *max_x = element->elementdata.rect.X + element->elementdata.rect.Width; + *max_y = element->elementdata.rect.Y + element->elementdata.rect.Height; + *empty = FALSE; + *infinite = FALSE; + return; + } + + /* Should be only combine modes left */ + assert(element->type < ARRAY_SIZE(combine_mode_flags)); + + flags = combine_mode_flags[element->type]; + + get_region_bounding_box(element->elementdata.combine.left, + &left_min_x, &left_min_y, &left_max_x, &left_max_y, &left_empty, &left_infinite); + + if (left_infinite) + { + /* change our function so we can ignore the infinity */ + flags = ((flags & 0x3) << 2) | ((flags & 0xc) >> 2); + } + + if (left_empty && (flags & 0x3) == 0) { + /* no points in region regardless of right region, return empty */ + *empty = TRUE; + *infinite = FALSE; + return; + } + + if (left_empty && (flags & 0x3) == 0x3) { + /* all points in region regardless of right region, return infinite */ + *empty = TRUE; + *infinite = TRUE; + return; + } + + get_region_bounding_box(element->elementdata.combine.right, + &right_min_x, &right_min_y, &right_max_x, &right_max_y, &right_empty, &right_infinite); + + if (right_infinite) + { + /* change our function so we can ignore the infinity */ + flags = ((flags & 0x5) << 1) | ((flags & 0xa) >> 1); + } + + /* result is infinite if points in neither region are in the result */ + *infinite = (flags & 0x1); + + if (*infinite) + { + /* Again, we modify our function to ignore the infinity. + * The points we care about are the ones that are different from the outside of our box, + * not the points inside the region, so we invert the whole thing. + * From here we can assume 0x1 is not set. */ + flags ^= 0xf; + } + + if (left_empty) + { + /* We already took care of the cases where the right region doesn't matter, + * so we can just use the right bounding box. */ + *min_x = right_min_x; + *min_y = right_min_y; + *max_x = right_max_x; + *max_y = right_max_y; + *empty = right_empty; + return; + } + + if (right_empty) + { + /* With no points in right region, and infinities eliminated, we only care + * about flag 0x4, the case where a point is in left region and not right. */ + if (flags & 0x4) + { + /* We have a copy of the left region. */ + *min_x = left_min_x; + *min_y = left_min_y; + *max_x = left_max_x; + *max_y = left_max_y; + *empty = left_empty; + return; + } + /* otherwise, it's an empty (or infinite) region */ + *empty = TRUE; + return; + } + + /* From here we know 0x1 isn't set, and we know at least one flag is set. + * We can ignore flag 0x8 because we must assume that any point within the + * intersection of the bounding boxes might be within the region. */ + switch (flags & 0x6) + { + case 0x0: + /* intersection */ + *min_x = fmaxf(left_min_x, right_min_x); + *min_y = fmaxf(left_min_y, right_min_y); + *max_x = fminf(left_max_x, right_max_x); + *max_y = fminf(left_max_y, right_max_y); + *empty = *min_x > *max_x || *min_y > *max_y; + return; + case 0x2: + /* right (or complement) */ + *min_x = right_min_x; + *min_y = right_min_y; + *max_x = right_max_x; + *max_y = right_max_y; + *empty = right_empty; + return; + case 0x4: + /* left (or exclude) */ + *min_x = left_min_x; + *min_y = left_min_y; + *max_x = left_max_x; + *max_y = left_max_y; + *empty = left_empty; + return; + case 0x6: + /* union (or xor) */ + *min_x = fminf(left_min_x, right_min_x); + *min_y = fminf(left_min_y, right_min_y); + *max_x = fmaxf(left_max_x, right_max_x); + *max_y = fmaxf(left_max_y, right_max_y); + *empty = FALSE; + return; + } +} + /***************************************************************************** * GdipIsVisibleRegionPoint [GDIPLUS.@] */ @@ -1313,12 +1516,25 @@ GpStatus WINGDIPAPI GdipIsVisibleRegionPoint(GpRegion* region, REAL x, REAL y, G { HRGN hrgn; GpStatus stat; + REAL min_x, min_y, max_x, max_y; + BOOL empty, infinite;
TRACE("(%p, %.2f, %.2f, %p, %p)\n", region, x, y, graphics, res);
if(!region || !res) return InvalidParameter;
+ x = gdip_round(x); + y = gdip_round(y); + + /* Check for cases where we can skip quantization. */ + get_region_bounding_box(®ion->node, &min_x, &min_y, &max_x, &max_y, &empty, &infinite); + if (empty || x < min_x || y < min_y || x > max_x || y > max_y) + { + *res = infinite; + return Ok; + } + if((stat = GdipGetRegionHRgn(region, NULL, &hrgn)) != Ok) return stat;
@@ -1328,7 +1544,7 @@ GpStatus WINGDIPAPI GdipIsVisibleRegionPoint(GpRegion* region, REAL x, REAL y, G return Ok; }
- *res = PtInRegion(hrgn, gdip_round(x), gdip_round(y)); + *res = PtInRegion(hrgn, x, y);
DeleteObject(hrgn);
-
Esme Povirk -
Esme Povirk (＠madewokherd)