wine-bugs December 2008

wine-bugs@winehq.org

2 participants
6748 discussions

[Bug 6316] MYOB V13 prints a blank page
by wine-bugs＠winehq.org 11 Dec '08

11 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=6316 --- Comment #23 from Nick J <nickpj(a)gmail.com> 2008-12-10 20:03:53 --- > Still need the regression test. I have attempted to do the regression test today, and can only report that the regression test itself appears to be broken. Here's what I did (on an Ubuntu 8.04 AMD64 system), following the instructions from http://wiki.winehq.org/RegressionTesting : -------------------------------------------- sudo apt-get install git-core sudo apt-get install ccache sudo apt-get build-dep wine wine-dev cd ~/tmp mkdir wine cd wine git clone git://source.winehq.org/git/wine.git wine-git cd wine-git git bisect start # Note the version 0.9.43 number came from my best guess of when it worked, based on other people's comments in this bug. git bisect good wine-0.9.43 git bisect bad wine-1.0 CC="gcc-4.2 -m32" LDFLAGS="-L/lib32 -L/usr/lib32 -L`pwd`/lib32 -Wl,-rpath,/lib32 -Wl,-rpath,/usr/lib32" ./configure -v make depend make mv ~/.wine ~/.wine-backup ------------------------------------------------------------ Everything went fine up to this point. Then attempt to install it: ./wine /cdrom/myobapp/mplus10/Setup.exe ... And after a minute or so get this error dialog box: "MYOB Accounting Plus v10.0.2 Setup failed to launch installation engine: (0x80040154) [OK]" On the console it says: $ ./wine /cdrom/myobapp/mplus10/Setup.exe preloader: Warning: failed to reserve range 00000000-60000000 wine client error:b: version mismatch 335/339. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running? err:process:start_wineboot failed to start wineboot, err 1359 err:dosmem:setup_dos_mem Cannot use first megabyte for DOS address space, please report preloader: Warning: failed to reserve range 00000000-60000000 wine client error:d: version mismatch 335/339. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running? preloader: Warning: failed to reserve range 00000000-60000000 wine client error:f: version mismatch 335/339. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running? err:ole:create_server class {91814ec0-b5f0-11d2-80b9-00104b1f6cea} not registered err:ole:CoGetClassObject no class object {91814ec0-b5f0-11d2-80b9-00104b1f6cea} could be created for context 0x4 $ Clicking the "OK" button causes the setup program to exit. I.e. I cannot see a way to setup the program to actually get to the bit I want to test. [re the tab switching problem] > File a new bug. Logged now as bug 16459. For people trying to use MYOB on Wine, you are probably going to run into tab switching problem too (as well as this printing problem). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 219] Programs refuse to run because of safedisc copy-protection
by wine-bugs＠winehq.org 11 Dec '08

11 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=219 Austin English <austinenglish(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Blocks| |12653 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 14151] New: CJK characters are displayed as squares when browsing files
by wine-bugs＠winehq.org 11 Dec '08

11 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=14151 Summary: CJK characters are displayed as squares when browsing files Product: Wine Version: CVS/GIT Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: fonts AssignedTo: wine-bugs(a)winehq.org ReportedBy: dkeehl(a)gmail.com I have many files with Chinese/Japanese file names. With wine 1.0, I made font links in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink], and they were displayed properly. But now, with wine 1.1,this method seems not to work any more. All those characters become squares. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 26

[Bug 6775] blank menus in cdarchitect 5.2
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=6775 Martin Wood-Mitrovski <marvotron(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |marvotron(a)gmail.com --- Comment #6 from Martin Wood-Mitrovski <marvotron(a)gmail.com> 2008-12-10 17:49:36 --- I installed cdarchitect52c_enu.exe, which is the non-trial version (I own the windows versions of SoundForge 9 / CD Architect) Install runs ok, but when running the app I cant register, the console says : fixme:wininet:InternetAttemptConnect Stub fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (20000): STUB And the app immediately says that the internet connection timed out. So I cancelled the automatic registration and selected 'Register from another computer'. After entering that Activation Code the app continues start up but crashes part way through : wine: Unhandled page fault on read access to 0xff01000f at address 0x1002ac0 (thread 0009), starting debugger... I'll try and gather more information and add it to this bug. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 6316] MYOB V13 prints a blank page
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=6316 --- Comment #22 from yonnie <yonnie(a)gmx.com> 2008-12-10 17:25:50 --- Refresher: Myob11 wouldn't work using Fedora 6, just real buggy, tended to crash, anything deeper than top-level window stuff wouldn't print. Windows with tabs would not usually allow selecting the tabs, etc... Fedora 8 came along, I upgraded as the F8 fanclub was making out F8 being the next best thing to invention of the wheel. I tried Myob11 on it and it worked! I was able to install all the old data from the windows system. We were able to input receivables, create invoices, print stuff, do the bank stuff, tax stuff, etc... The accountant was using it and happy. This honeymoon lasted about 1 month. Then... First-off it wouldn't print Invoices, just a blank page, I thought I had a bad printer. Then I realized there were other issues with the tabs on some windows didn't work. Some of the bank info wasn't accessible. The accountant now refuses to use Linux for anything but letters, email and solitaire. I told her tough, get used to Linux because this place isn't going back to M$, period. I've installed several other accounting programs made for Linux, but she still hasn't decided to take the effort to learn them, she's holding out for MYOB. I'm not set up for, nor do I understand how to do regression testing. Wouldn't know what to do if I found something, either. I really don't care how much trouble Linux is or how little how understand it...there is no way in hell we are going back to M$, even if we have to send all our accounting out to a service. So, yeah, it sure would be nice if you geniuses could figure out why it wouldn't then why it did and then why it won't work anymore!! If it makes a difference, we use a network printer, hp L7780. System that needs to use MYOB is running Mepis 7 and system used for testing various new software from repos is running Lenny. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 9158] "Microsoft .NET Framework 3.0 Redistributable Package" fails to install
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=9158 --- Comment #10 from Anastasius Focht <focht(a)gmx.net> 2008-12-10 17:05:29 --- Hello, thanks, but there is no point in providing logs. Show stoppers are known, partly covered by .NET 3.5 bug 10547. Missing "BITS" bits (comment #8) and pidgen stub dll (http://bugs.winehq.org/attachment.cgi?id=16508). Follow up is wintrust (.inf file signature validation). The _SFX_CAB_SHUTDOWN_REQUEST workaround will be most likely part of later winetricks recipe until wine properly supports FILE_ATTRIBUTE_HIDDEN. Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 7411] GLSL shaders work badly with fglrx
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=7411 --- Comment #12 from M.Kiesel <winehq.org(a)continuity.cjb.net> 2008-12-10 17:04:25 --- Created an attachment (id=17816) --> (http://bugs.winehq.org/attachment.cgi?id=17816) PoP with fbo Attached is a PoP snapshot with fbo enabled. This looks slightly better but the vertical/horizontal "extensions" of some objects are still there. Everything's also quite nondeterministic; on some starts of the game the whole background is red etc. - quite a surrealistic experience ;). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 7411] GLSL shaders work badly with fglrx
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=7411 Stefan Dösinger <stefandoesinger(a)gmx.at> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |stefandoesinger(a)gmx.at --- Comment #11 from Stefan Dösinger <stefandoesinger(a)gmx.at> 2008-12-10 16:37:44 --- I think the bugs aren't related to vertex shaders, more to post processing effects. By default WineD3D uses the back buffer for offscreen rendering because FBO support is still buggy in Wine and the drivers. However, this can lead to corruptions like these. If AUX buffers are available they are used, fixing most of the problems. However, fglrx doesn't support aux buffers. The best fix for this is to use FBOs instead(HKEY_CURRENT_USER/Software/Direct3D/offscreenRenderingMode = "fbo") and fix all fbo related bugs. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 6316] MYOB V13 prints a blank page
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=6316 David McNeill <davemc(a)mcpond.co.nz> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |davemc(a)mcpond.co.nz --- Comment #21 from David McNeill <davemc(a)mcpond.co.nz> 2008-12-10 16:06:16 --- On MYOB v16, printing of reports and lists DOES work. (You need to have your cups / wine sorted out as for any other windows app to print) Printing of forms uses a different engine inside MYOB, and does NOT work. You can't print invoices, POs, statements, or any other form, either standard or customised. Based on yonnie's post it appears it used to work, someone needs to do the testing of prior versions (regression testing) and find out when it broke, or if it ever really did work. This bug needs to focus on fixing the forms printing problem... > Louis Lenders > I can see the problem, yeah. Looks like a bug in wine's printing code. > Maybe one of the printerguys (Detkef ?) could have a look For other MYOB issues, please search for other bugs. Given that the primary purpose of MYOB is recording sales and printing invoices to get money, it's pretty much unuseable if forms printing doesn't work, making this a show stopper bug for MYOB use. That in turn stops a lot of small businesses from switching to Linux. Their other needs are well met by openoffice, firefox and thunderbird. MYOB is the only other thing they run. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

[Bug 3260] Get Starforce copy protection working perfectly [metabug].
by wine-bugs＠winehq.org 10 Dec '08

10 Dec '08

http://bugs.winehq.org/show_bug.cgi?id=3260 knipl(a)in.tum.de changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |knipl(a)in.tum.de -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs December 2008