wine-bugs November 2010

wine-bugs@winehq.org

1 participants
8144 discussions

[Bug 16149] New: Star Wars Rebellion: tactical battle mode crashes game
by wine-bugs＠winehq.org 15 Oct '25

15 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=16149 Summary: Star Wars Rebellion: tactical battle mode crashes game Product: Wine Version: 1.1.8 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: appleshampooid(a)netscape.net Created an attachment (id=17394) --> (http://bugs.winehq.org/attachment.cgi?id=17394) console output Star Wars: Rebellion will crash when you try to enter tactical battle mode (when two fleets meet over a planet). The fastest way to reproduce the bug is to start a new game as the Rebellion and move your closest fleet to Coruscant, then bump the game speed up to Fast and you'll get a battle alert within a minute. Once you take control of the battle, you can issue orders while still paused, although the starfield is blank and doesn't show any of the ships. As soon as you unpause the battle or click in the starfield, the game will crash. NOTE: I'm using the native DLLs for d3drm.dll and d3dxof.dll. The problem with d3drm.dll is described in bug 8232, but it doesn't look like it's getting fixed any time soon. From the console output, I'm pretty sure this bug would still cause the game to crash even if the wine DLLs for those libraries worked (the errors seem to be coming from other wine DLLs, not the native ones). Other than those DLLs, I'm running it with a fresh .wine directory on 1.1.8. Console output is attached, please let me know if you'd like me to enable any other debug flags. Note that the error which is listed the first few times in the file is pumped out constantly for the duration of the game, so I'm not sure if its relevant. I've snipped off the top of the logfile until right before you enter battle mode and it crashes. Unfortunately I don't believe the game is available for free download. I'm running Ubuntu 8.04. Thanks for taking a look. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 43

[Bug 10349] New: Yukon Trail installer crashes at the end
by wine-bugs＠winehq.org 10 Oct '25

10 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=10349 Summary: Yukon Trail installer crashes at the end Product: Wine Version: 0.9.48. Platform: Other OS/Version: other Status: UNCONFIRMED Severity: minor Priority: P2 Component: wine-misc AssignedTo: wine-bugs(a)winehq.org ReportedBy: echidnaman(a)gmail.com Created an attachment (id=9017) --> (http://bugs.winehq.org/attachment.cgi?id=9017) Crash Log After the Yukon Trail's installer is done installing, it crashes, taking the file browser it spawns with it. To reproduce: -Run installer -Complete installation -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 24

[Bug 19153] New: DX3 game does not recognize graphics capabilities
by wine-bugs＠winehq.org 07 Oct '25

07 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=19153 Summary: DX3 game does not recognize graphics capabilities Product: Wine Version: 1.1.24 Platform: PC URL: http://appdb.winehq.org/objectManager.php?sClass=versi on&iId=9396 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-ddraw AssignedTo: wine-bugs(a)winehq.org ReportedBy: bobbyg(a)gmx.net Resident Evil 1 does not start giving the error "Failed to initialize the Graphics Hardware Device.(3)". It's a DirectX 3 game using immediate mode. After some debugging I found that it relies on 3 (three) entries returned by EnumDevices whereas wine returns only the Direct3D HAL entry in this case (d3dversion == 1). Removing the if-clause in ddraw/direct3d.c and duplicating the HAL entry solves the problem and the game actually runs almost perfectly (Garbage -> Platinum). I checked a Windows installation which returns "HAL", "RGB Emulation" and "Ramp Emulation" but the comments in the file suggest that not all games are happy about that. So how to fix this properly? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 51

[Bug 21359] New: Windows 7 Platform SDK can't restart installer
by wine-bugs＠winehq.org 07 Oct '25

07 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=21359 Summary: Windows 7 Platform SDK can't restart installer Product: Wine Version: 1.1.36 Platform: x86 OS/Version: Linux Status: NEW Keywords: download, Installer Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Once the installer has gone a ways and aborted, starting it again aborts fairly quickly with a dialog box saying there was a problem. I'll attach the last zillion lines of a +seh,+relay,+text log; looks like it has something to do with a service not being available? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 24063] New: World in conflict fails to start in DX10 mode
by wine-bugs＠winehq.org 06 Oct '25

06 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=24063 Summary: World in conflict fails to start in DX10 mode Product: Wine Version: 1.3.1 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: xvachon(a)gmail.com Created an attachment (id=30246) --> (http://bugs.winehq.org/attachment.cgi?id=30246) Log +d3d10 World in Conflict is unable to start in DX10 mode. Native dxdiagn.dll was used to avoid http://bugs.winehq.org/show_bug.cgi?id=11114 and sh winetricks d3dx10 was run too. I uploaded a +d3d10 log. If you need other debug channels, please ask. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 11265] New: A number of bugs with Civilization I
by wine-bugs＠winehq.org 04 Oct '25

04 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=11265 Summary: A number of bugs with Civilization I Product: Wine Version: 0.9.53. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru A Civilization I for Windows (16-bit) displays a number of bugs: 1. Some splash screens display no content. 2. In some dialogues (such as city-dialogue) there are some tranparent/non-rendered areas 3. Keyboard commands do not work in game. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 32

[Bug 11273] New: Civilization I for Windows (16-bt) does not install through setup
by wine-bugs＠winehq.org 04 Oct '25

04 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=11273 Summary: Civilization I for Windows (16-bt) does not install through setup Product: Wine Version: 0.9.53. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: setupapi AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru Civilization I for Windows (16-bt) does not install through setup. Already existing installation works, though, with some bugs I've reported separately. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 24

[Bug 21855] New: WordPro Windows pull down does not show file names
by wine-bugs＠winehq.org 03 Oct '25

03 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=21855 Summary: WordPro Windows pull down does not show file names Product: Wine Version: 1.1.38 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P4 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ToddAndMargo(a)verizon.net Created an attachment (id=26459) --> (http://bugs.winehq.org/attachment.cgi?id=26459) Missing file names in Windows pull down Hi All, Would you guys fix this for me? I am using Lotus Word Pro N9.8.0208.1200. When you open two files (documents) from the command line (the jpeg I have attached), then go to the "Window" pull down to select which file to bring into focus, the file names are missing. If you start Word Pro, then use File, Open to select two files, one at a time, the second file does not show. Many thanks, -T -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 23326] New: Cannot change printer settings, Family Tree 7
by wine-bugs＠winehq.org 02 Oct '25

02 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=23326 Summary: Cannot change printer settings, Family Tree 7 Product: Wine Version: 1.2-rc4 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jamesl(a)bestweb.net Created an attachment (id=29072) --> (http://bugs.winehq.org/attachment.cgi?id=29072) FTW7 print dialogue, compare Wine to XP Cannot select printer/change print settings with Family Tree Maker 7. Dialogue box comes up, drop-down boxes are working, but radio buttons for switching between "default printer" and an alternate printer are not selectable. Have compared the print dialogue between Wine vs a native install under Windows XP (SP3) and notice some text from the Windows install does not show up under Wine. Also tried the same thing with the "free" version of FTM2005se available at http://past.familytreemaker.com/download/starter.aspx and found it's behavior is the same. So I will describe steps from there, since it would be eaier for someone to get that to test against. STEPS TO RECREATE: 1: Set up wine profile with "WINEPREFIX=/home/jelabarre/wine-apps/ftw2005 winecfg"; set winver to "Windows XP", point the Documents directory under Desktop Integration to my own Documents directory 2: install FTW2005 by running "WINEPREFIX=/home/jelabaWINEPREFIX=/home/jelabarre/wine-apps/ftw2005 wine ./FamilyTreeMaker2005se.exe", accept all defaults. 3: open FTW 2005 from "Wine" menu entry on Gnome menu. Selected "Buy Later" from popup window (does not affect outcome, as same print problem occurrs in a regular retail version of FTM7) 4: create new file, or use existing file (same result either way) 5: select "File | Print Setup", then try to select radio button for either "Default Printer" or "Specific Printer". Neither can be selected 6: try selecting a "specific printer" from drop-down box. Printer can be selected, but radio buttons still not functional. 7: after selecting a printer other than the default (such as print-to-PDF) and then try printing. Output will still go to the Linux default printer, no edits of the print settings will take effect. The "Family Archive Viewer v6.0" at http://familytreemaker.genealogy.com/abtffiv.html and "Family Archive Viewer v11.0" at http://www.genealogy.com/abtffiv.html are other variants that exhibits this behavior. Have attached sample screenshots of Wine vs WinXP versions of the print dialogue. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 17

[Bug 18260] New: Quicktime 2 installer exits silently
by wine-bugs＠winehq.org 01 Oct '25

01 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=18260 Summary: Quicktime 2 installer exits silently Product: Wine Version: 1.1.20 Platform: PC URL: http://www.oldversion.com/download/quicktime212.exe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk Created an attachment (id=20783) --> (http://bugs.winehq.org/attachment.cgi?id=20783) Wine 1.1.20 +relay +seh +tid (last 3MB) Installer from Quicktime 2.1.2 exits silently. Apparently the only available version is from oldversion.com However, I also have a copy that comes with another app that installs fine. It *might* have something to do with the lzexpand DLLs. Failing version prints these lines and then exits: trace:loaddll:NE_FreeModule Unloaded module "LZEXPAND.DLL" : builtin trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lzexpand.dll16" : builtin trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" : builtin Whereas the working version prints this line and continues: trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" : builtin I can upload the working version too if needed. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 34

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs November 2010