http://bugs.winehq.org/show_bug.cgi?id=15256
Summary: Disabling OpenGL output in WinUAE causes crash, possibly
in x11drv_main
Product: Wine
Version: 1.1.4
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Created an attachment (id=16046)
--> (http://bugs.winehq.org/attachment.cgi?id=16046)
Console output on crash
WinUAE is an open source (GPL) emulator of Amiga computers, available from
http://www.winuae.net/.
The output of WinUAE can be rendered using DirectDraw (default), Direct3D or
OpenGL. If WinUAE is set to use OpenGL, disabling the output filter (which
reverts to DirectDraw output) causes WinUAE to crash.
The console output on crashing begins:
fixme:dbghelp:dump_system_info fill in CPU vendorID and feature set
err:ntdll:RtlpWaitForCriticalSection section 0x7d1da4c0 "x11drv_main.c:
X11DRV_CritSection" wait timed out in thread 0019, blocked by 0009, retrying
(60 sec)
wine: Unhandled page fault on read access to 0x000005e0 at address 0x7edfcaa9
(thread 0009), starting debugger...
To demonstrate:
- Run WinUAE
- Select a disk image for drive DF0: in the Floppy drives page, e.g.
rsi1.adf.gz from ftp://ftp.coresystems.de/pub/uae/rsi1.adf.gz
- In the filter page, check the Enable box and select the OpenGL filter.
- Click OK to start the emulation.
- After a few seconds press F12 to bring up the settings window.
- In the Filter page, uncheck the Enable box.
- To work around Wine bug 10643, click in the main window and press F12.
- Click OK to dismiss the settings window. WinUAE crashes.
Attached is the console output on crashing. I can attach a minidump file if
needed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19086
Summary: Front Panel Designer: crashes when trying to load
saved files
Product: Wine
Version: 1.1.24
Platform: PC
URL:
http://www.schaeffer-ag.de/en/download/front-panel-des
igner.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dariuskellermann(a)gmx.de
The application crashes (displays error message, becomes unresponsive, error
message cannot be clicked) when trying to load a previously saved front panel
file.
Terminal displays no output(none at all).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14132
Summary: Incorrect Font Displayed After Install
Product: Wine
Version: 1.0.0
Platform: PC
URL: see Description
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pbronline-wine(a)yahoo.co.uk
Occurs with Corel WordPerfect Office X3 and WordPerfect Office 12.
Start installer. Note font (print snapshot or whatever). Install application,
Quit installer. Start installer again. Font displayed is different.
With WordPerfect Office X3, the effect is obvious as the 'wrong' font is a
symbol font. With WordPerfect Office 12, the 'wrong' font is very narrow (I
think this may have previsouly been reported as <<poor rendering>>).
Problem affects not just the installers but also service packs and the
applications themselves (particularly Presentations). I would expect it
affects all installed applications.
To confirm the problem ...
1. remove all references to Corel installed fonts from system.reg which ever
way you choose but the following works:
cd .wine
mv system.reg system.reg~
sed -e '/TrueType.*C:.*\.TTF/d' -e '/TrueType.*C:.*\.ttf/d' system.reg~ >
system.reg
2. move Corel installed fonts to one side for a moment:
mv drive_c/windows/Fonts drive_c/windows/Fonts.wpo
mkdir drive_c/windows/Fonts
3. Start installer. Font is back to what is was before installation. Quit
installer.
3. Put back a bad font:
cp -p drive_c/windows/Fonts.wpo/WPCO03N_.TTF drive_c/windows/Fonts
4. Start installer. Symbol font makes screen indecypherable.
5. Try other fonts. Not all override the 'good' font. MTEXTRA.TTF and
WPHV04N_.TTF do.
Downloads ?
WordPerfect Office X3:
http://www.corel.com/servlet/Satellite?pagename=uk/ProcessLayout&lc=en&ppg=…
Professional (aka not Trial) Edition is 'fun' to install. See bug 14106.
WordPerfect Office 12:
Not available for download anymore as far as I can tell. Perhaps one of the
nice people who contributed to bug 2547 can help.
Standard (aka not Trial) Edition installs nicely under Wine 1.0.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11081
Summary: Windows Genuine Advantage Tool crashes on launch
Product: Wine
Version: 0.9.52.
Platform: Other
URL: http://www.microsoft.com/genuine/downloads/Validate.aspx
?displaylang=en&sGuid=68d69b53-5057-4179-b72b-
dfb1e12854f2
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=10101)
--> (http://bugs.winehq.org/attachment.cgi?id=10101)
Terminal output in wine 0.9.52
Windows Genuine Advantage Tool crashes on launch. While obviously not a very
important program to us, it should still run (and fail validation). Backtrace
attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17342
Summary: Adobe acrobat 5 crash after a splash screen
Product: Wine
Version: 1.1.14
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: last_deceneu(a)yahoo.com
Created an attachment (id=19377)
--> (http://bugs.winehq.org/attachment.cgi?id=19377)
crash log of acrobat 5
Acrobat is the only reason that I use wine. I seen that only version 5 of
acrobat is working on wine. Currently I updated my suse linux from 11.0 to
11.1. On suse 11.1 I installed wine 1.1.14 and it crashed after displaying a
splash screen, it krash also with 1.1.9. On previous version of suse 11.0 I
used wine 0.9 and worked fine.
I installed acrobat in a clean wine and with winetricks I installed mfc42 and
vcrun2008.
Please give some instructions how to make it work.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20165
Summary: Ikea Home Planner 2010 crashes or hangs X.
Product: Wine
Version: 1.1.29
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tshoulihane(a)hotmail.com
Created an attachment (id=23764)
--> (http://bugs.winehq.org/attachment.cgi?id=23764)
Crash log
2010 (2.0.3) version of Ikea home planner. Installs OK, but on adding an itme
to the room layout (for example a door), wine crashes. If run from the programs
menu, X locks up and needs to be restarted.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13925
Summary: Ikea home planer 2D and 3D graphical views show only
garbage
Product: Wine
Version: 1.0-rc4
Platform: PC
URL: http://www.ikea.com/ms/de_DE/rooms_ideas/splashplanners.
html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)zorglub.s.bawue.de
Created an attachment (id=14043)
--> (http://bugs.winehq.org/attachment.cgi?id=14043)
section of .xsession-errors while IPH was running.
Hello,
the actual version of Wine is 1.0-rc5 but it's not listed yet.
This bug is related to test
http://appdb.winehq.org/objectManager.php?sClass=version&iId=11720&iTesting…
There is not much to add to what I've written there actually, so copy&paste:
Application installs and starts, but all graphical views are completely garbled
(2D and 3D, like a TV without channel), the menus and icons seem to work and do
something but I can't see anything.
# Graphical configuration
Section "Device"
Identifier "Intel Corporation 82Q963/Q965 Integrated Graphics
Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
# glxinfo
[...]
direct rendering: Yes
[...]
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965Q 4.1.3002 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.0.3-rc2
[...]
I also attach my .xsession-errors (the part related to when the Ikea program
was running.
Let me know if you need more.
Thanks, Eric
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21402
Summary: Microsoft GIF Animator fails to install correctly
Product: Wine
Version: 1.1.36
Platform: x86-64
URL: http://download.cnet.com/Microsoft-GIF-Animator/3000-1
8512_4-12053.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=25771)
--> (http://bugs.winehq.org/attachment.cgi?id=25771)
Terminal output
Microsoft GIF Animator's setup program seems to run smoothly at first, but
after clicking the "complete install" button, it won't finish the installation.
It produces a message which simply says "Microsoft GIF Animator setup did not
complete successfully."
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22185
Summary: Speed Reading 2000 fails to install
Product: Wine
Version: 1.1.21
Platform: x86
URL: http://www.speedyshare.com/files/21643830/sr2000v1_6.e
xe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
CC: dmitry(a)codeweavers.com
Created an attachment (id=27069)
--> (http://bugs.winehq.org/attachment.cgi?id=27069)
Terminal output on Wine 1.1.41
Steps to reproduce:
1) remove ~/.wine
2) wine sr2000v1_6.exe
3) click next several times
4) Wine error appears after choosing install directory
Problem doesn't occur on Wine 1.1.20 so this is an regression. Regression test
did give:
54d7c8012d1d7369a56779955ced5a09e448a1cd is the first bad commit
commit 54d7c8012d1d7369a56779955ced5a09e448a1cd
Author: Dmitry Timoshkov <dmitry(a)codeweavers.com>
Date: Wed Apr 29 15:17:35 2009 +0900
explorer: Initialize the Progman DDE interface when starting explorer.
:040000 040000 4a347655bb6f41b8b8377d8e3e3e25c1551d1730
05513d15b76a99fe5033c4422a82008667425088 M programs
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16882
Summary: WMI core 1.5 installation hangs (needed for .NET 3.0
installer, WCF part), SECURITY_SERVICE_RID missing from
service token group
Product: Wine
Version: 1.1.12
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?familyid
=AFE41F46-E213-4CBF-9C5B-FBF236E0E875
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
after getting past bug 16879 one encounters this one.
----
Prerequisite:
1. clean WINEPREFIX
2. sh winetricks -q dotnet20
3. download .NET 3.0 Framework installer from: http://download.microsoft.com
/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
(sha1sum:
a566bcd2ffffc3842a95adc57f7df3f8cd11577f)
4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158)
5. wine ./dotnetfx3setup.exe
It might take a while until all required packages are downloaded using BITS.
Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from
"c:\\windows\\temp" to a different location, remove ~/.wine, copy
"dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from
downloading over and over again.
----
"c:\\windows\\temp\\dd_dotnetfx3error.txt":
--- snip ---
[01/11/09,12:50:20] Windows Communication Foundation: [2] Error: Installation
failed for component Windows Communication Foundation. MSI returned error code
1603
[01/11/09,12:50:31] WapUI: [2] DepCheck indicates Windows Communication
Foundation is not installed.
[01/11/09,12:50:31] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0
was not attempted to be installed.
--- snip ---
"c:\\windows\\temp\\dd_wcf_retMSI597F.txt":
--- snip ---
1: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe /r /x /y /v 2:
1: ERROR: Process returned non-0 value! CMDLINE:
C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe /r /x /y /v 2:
1: Failed 2:
--- snip ---
and "c:\\windows\\temp\\dd_wcf_retCA69A1.txt":
--- snip ---
=== Verbose logging started: 1/11/2009 12:50:17 Calling process:
C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe ===
ServiceModelReg [12:50:18:302]: Warning: Could not detect IIS installation or
IIS is disabled, skipping the Web Host Script Mappings component since it
depends upon IIS to function properly.
If you believe this message is an error, check your IIS installation to make
sure it is installed properly.
ServiceModelReg [12:50:18:329]: Information: The ServiceModelReg tool will take
the following actions:
Reinstalling configuration section system.serviceModel to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Reinstalling configuration section system.runtime.serialization to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Reinstalling configuration section system.serviceModel.activation to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Adding configuration entry for BuildProvider:
System.ServiceModel.Activation.ServiceBuildProvider,
System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089
Reinstalling compilation assembly node to System.Web section group:
System.Runtime.Serialization, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL
Reinstalling compilation assembly node to System.Web section group:
System.IdentityModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089, processorArchitectur...
ServiceModelReg [12:50:18:358]: Uninstalling: Machine.config Section Groups and
Handlers
ServiceModelReg [12:50:18:366]: Warning: Configuration section
system.serviceModel does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:369]: Warning: Configuration section
system.runtime.serialization does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:373]: Warning: Configuration section
system.serviceModel.activation does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:374]: Installing: Machine.config Section Groups and
Handlers
ServiceModelReg [12:50:18:893]: Uninstalling: System.Web Build Provider
ServiceModelReg [12:50:19:095]: Warning: A configuration entry for
BuildProvider System.ServiceModel.Activation.ServiceBuildProvider,
System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089 does not exist.
ServiceModelReg [12:50:19:096]: Installing: System.Web Build Provider
ServiceModelReg [12:50:19:138]: Uninstalling: System.Web Compilation Assemblies
ServiceModelReg [12:50:19:153]: Warning: All compilation assembly nodes do not
exist in System.Web section group.
ServiceModelReg [12:50:19:154]: Installing: System.Web Compilation Assemblies
ServiceModelReg [12:50:19:246]: Uninstalling: HTTP Handlers
ServiceModelReg [12:50:19:260]: Warning: HttpHandlers node *.svc does not exist
in System.Web section group.
ServiceModelReg [12:50:19:261]: Installing: HTTP Handlers
ServiceModelReg [12:50:19:322]: Uninstalling: HTTP Modules
ServiceModelReg [12:50:19:333]: Warning: HttpModules node ServiceModel does not
exist in System.Web section group.
ServiceModelReg [12:50:19:334]: Installing: HTTP Modules
ServiceModelReg [12:50:19:365]: Repairing: WMI Classes
ServiceModelReg [12:50:19:396]: Warning: Failure executing
"C:\windows\system32\wbem\mofcomp.exe" with parameters
""C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"": System.IO.FileNotFoundException: Could not load
file or assembly 'C:\windows\system32\wbem\mofcomp.exe' or one of its
dependencies. Exception from HRESULT: 0x80070002
File name: 'C:\windows\system32\wbem\mofcomp.exe'
at System.ServiceModel.Install.InstallHelper.ExecuteWaitHelper(String
program, String parameters)
at System.ServiceModel.Install.InstallHelper.ExecuteWait(String program,
String parameters, Int32[] allowedExitCodes)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
ServiceModelReg [12:50:19:516]: System.InvalidCastException: Retrieving the COM
class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24}
failed due to the following error: 80004002.
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementScope.Connect()
at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled()
at
System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel
outputLevel)
at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem
actionItem, Nullable`1 confirmUninstall)
at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args)
at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args)
=== Verbose logging stopped: 1/11/2009 12:50:19 ===
--- snip ---
Oh joy ... WMI.
Providing fake mofcomp.exe (returning success) is not enough, WCF installer
will try *use* WMI hence there needs to be some working infrastructure:
--- snip ---
ServiceModelReg [19:37:29:832]: Starting tool
'C:\windows\system32\wbem\mofcomp.exe' with parameters
'"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"'.
ServiceModelReg [19:37:29:895]:
ServiceModelReg [19:37:29:896]:
ServiceModelReg [19:37:29:897]: Tool 'C:\windows\system32\wbem\mofcomp.exe'
with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"' exited with code '0'.
ServiceModelReg [19:37:29:955]: System.InvalidCastException: Retrieving the COM
class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24}
failed due to the following error: 80004002.
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementScope.Connect()
at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled()
at
System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel
outputLevel)
at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem
actionItem, Nullable`1 confirmUninstall)
at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args)
at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args)
=== Verbose logging stopped: 1/8/2009 19:37:29 ===
--- snip ---
This is a big blocker and getting WMI to work with Wine is imperative for .NET
3.0 and higher.
Of course this also useful for older .NET Frameworks
Roll-back, prepare clean WINEPREFIX again;-)
We need to install native WMI core 1.5 from:
http://www.microsoft.com/downloads/details.aspx?familyid=AFE41F46-E213-4CBF…
Download wmicore
http://download.microsoft.com/download/platformsdk/wmicore/1.5/W9XNT4/EN-US…
(sha1sum: f7a36668eb6c82a28393637ffdf0ec6e8adfa6a1)
Make sure you set winver to NT 4.0 (don't forget to reset to default) and
execute the installer (I already have my own winetricks step for this):
--- snip ---
wine wmicore.exe
--- snip ---
The installer will then hang at some point "Configuring repository".
With winedbg one can see following processes:
--- snip ---
Wine-dbg>info process
pid threads parent executable (all id:s are in hex)
0000000c 5 0000000a 'services.exe'
0000000f 1 0000000a 'explorer.exe'
0000001b 4 0000000c 'winedevice.exe'
00000025 1 00000000 'wmicore.exe'
00000027 2 00000025 'GLBbab.tmp'
00000022 4 0000000c 'WinMgmt.exe'
--- snip ---
The problem is "WinMgmt.exe" which ought to be a service but due to Wine
insufficiency the service thinks it's a normal process not showing usual
service process behaviour as registering control handler and the like.
If you do 'wineserver -k' and try to start anything with Wine nothing will
happen until wineboot times out...
As quickfix, start regedit (wait until wineboot timeout) and set service start
type key for "WinMgmt" to manual start, e.g. "2" -> "3".
Also a kernel driver (service) that is installed with WMI "smbios" fails to
load but this currently harmless.
If we look now in "c:\\windows\\system32\\WBEM" we see the whole stuff
installed.
The logs in "logs" subdirs are not revealing much so we have to increase the
log level:
--- snip ---
[HKEY_LOCAL_MACHINE\Software\Microsoft\WBEM\CIMOM]
"Logging"="1"
"Logging Directory"="C:\\windows\\system32\\WBEM\\Logs"
--- snip ---
LogLevel is 0 to turn off logging, a 1 to turn on logging, and a 2 for verbose
logging.
After that, we manually try to start the service:
--- snip ---
$ wine net start winmgmt
err:winedevice:ServiceMain driver L"smbios" failed to load
The Windows Management Instrumentation service is starting.
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,2,(nil),32,(nil)) -
stub!
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub!
fixme:advapi:RegisterEventSourceW (L"",L"WinMgmt"): stub
wine: Call from 0x7b844f54 to unimplemented function
ole32.dll.CoSwitchCallContext, aborting
err:rpc:I_RpcReceive we got fault packet with status 0x80000100
fixme:ole:CoCreateInstance no instance created for interface
{00000000-0000-0000-c000-000000000046} of class
{8bc3f05e-d86b-11d0-a075-00c04fb68820}, hres is 0xc0000005
--- snip ---
This is bug 7187
After fixing this problem, we repeat the whole stuff again to get this in logs:
--- snip ---
(Sun Jan 11 13:41:41 2009) :
Starting WinMgmt, ProcID = 26, CmdLine = , User = focht(Sun Jan 11 13:41:41
2009) :
WinMgmt bIsService = 0, return code from function determining if service =
0(Sun Jan 11 13:41:41 2009) :
WinMgmt gbRunAsApp = 1(Sun Jan 11 13:41:41 2009) :
Starting Initialize, ID = 26(Sun Jan 11 13:41:41 2009) :
Registered class factory with flags: 0x15
(Sun Jan 11 13:41:41 2009) :
RegOpenKey returned 0x2 while trying to open the transports node. Using
default transports!(Sun Jan 11 13:41:41 2009) :
Initialize complete(Sun Jan 11 13:41:41 2009) :
WindowProc got hWnd=20026, message=24, wParam=0, lParam=33f814(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=81, wParam=0, lParam=33fce8(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=83, wParam=0, lParam=33f974(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=1, wParam=0, lParam=33fce8(Sun Jan 11
13:41:41 2009) :
Inside the waiting function
--- snip ---
"WinMgmt bIsService = 0" is the culprit.
The process retrieves token information and checks if process token groups
contain "SECURITY_INTERACTIVE_RID" (-> normal process) or
"SECURITY_SERVICE_RID" (service process).
I think it's actually services.exe that adds the SECURITY_SERVICE_RID sid to
the newly created service process (token groups).
This requires some infrastructure, including wineserver.
I already quick-hacked a path to verify this and it works as expected, letting
the service successfully start ;-)
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.