http://bugs.winehq.org/show_bug.cgi?id=23434
Summary: wine hangs & jumps up to 100% processor load
Product: Wine
Version: 1.2-rc5
Platform: x86
URL: http://www.velumng.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: axel.braun(a)gmx.de
Running wine-1.1.48_1.2rc5-1.1, i downloaded the demo from velumng.com, a race
management software.
So far it works well, I created a race, two participants, entered start and end
time, but when I come to the result list creation, the load goes up to 100%,
and caused a hang of the X-session once.
At this point it seems to load a HTML-page that was dynamically generated. wine
did not submit any error message when started from console.
Let me know what I can do to come to a more verbose error output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13076
Summary: untangle: resize fails
Product: Wine
Version: 0.9.61.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)wnoise.ofb.net
After any of the games in Simon Tatham's portable puzzle collection is resized,
it only redraws the portion of the window that is the original size.
Under windows, these games rescale to fit in the new window size.
These may all be downloaded at
http://www.chiark.greenend.org.uk/~sgtatham/puzzles/
and have full source available.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26766
Summary: A lot of games are listed against distributors and not
the developers
Product: WineHQ Apps Database
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: ASSIGNED
Severity: trivial
Priority: P5
Component: appdb-unknown
AssignedTo: kennybobs(a)o2.co.uk
ReportedBy: kennybobs(a)o2.co.uk
A lot of the games in the AppDB are listed against the distributors instead of
the actual developers.
This is not a major problem but it would be nice to tidy this up and any bugs
relating to certain developers would be easier to collect.
Other maintainers have, sensibly, simply added "Versions" for each distributor,
and as each distributor tends to update their products as they see fit, rather
than when the developer sees fit, this could affect the ratings for different
implementations of the same game.
Assigning to myself as it's a fairly big job (some games have to be downloaded
and run just to find out who developed them) and will take far too long for me
to simply remember what's what.
Currently affected: Big Fish Games, PopCap, Steam.
Anyone: please feel free to help!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16091
Summary: StickyDrive demo installer doesn't recognize USB key as
removable
Product: Wine
Version: 1.1.8
Platform: Other
URL: http://mmiline.com/
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
(From mmiline.com's main page, click on StickyDrive and then "Learn More",
then under Red Sox demo, click "Download Now". This points to
http://www2.stickyinc.com/download/getDownload.php?idTag=BOSTN-1668&action=…
which downloads the installer in question,
InstallStickyDrive-BOSTN-1668.exe.)
The installer puts up a dialog box of drive letters,
saying "Please select a valid removable drive...",
but nothing is listed, even if you have a USB drive
inserted and Wine has already created a d: mapping for it.
If you click on the "Show all drives"
checkbox, all drives are indeed shown.
Happily for us, this dialog box is in a separate
executable. While that prompt is up, grab a copy
of C:\windows\temp\SDDriveSelector.exe
You can then reproduce the problem easily by running
just that .exe.
+relay shows it's using GetDriveType() on each drive,
but evidently it doesn't like what it's getting.
You can work around this by using winecfg to mark d:
as a floppy, but really, wine should know that the inserted
USB drive is removable, shouldn't it?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25498
Summary: ACDSeePFM doesn't see dlls in Common Files
Product: Wine
Version: 1.3.9
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=32462)
--> (http://bugs.winehq.org/attachment.cgi?id=32462)
Terminal output on Wine 1.3.9 at installation
Steps to reproduce:
1) remove ~/.wine
2) install acdseepfm-1-0-81-win-en.exe
3) wine ACDSeePFM.exe
Behaviour:
err:module:import_dll
Expected behaviour:
no err:module:import_dll
Terminal output:
err:module:import_dll Library ShellIntMgrPFMU.dll (which is needed by
L"C:\\Program Files\\ACD Systems\\ACDSee Picture Frame
Manager\\1.0\\ACDSeePFM.exe") not found
err:module:import_dll Library ACDInTouch70U.dll (which is needed by
L"C:\\Program Files\\ACD Systems\\ACDSee Picture Frame
Manager\\1.0\\ACDSeePFM.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program
Files\\ACD Systems\\ACDSee Picture Frame Manager\\1.0\\ACDSeePFM.exe" failed,
status c0000135
Additional info:
Both dlls are available in "~/.wine/drive_c/Program Files/Common Files/ACD
Systems" and if I copy them to application main directory both errors
disappear.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10531
Summary: Windows Calculator: Color in buttons missing
Product: Wine
Version: 0.9.49.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bammzilla(a)gabriana.com
Created an attachment (id=9282)
--> (http://bugs.winehq.org/attachment.cgi?id=9282)
How it looks in my Windows XP box
In Windows Calculator CALC.EXE the button texts should be color coded but all
appear black in Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26407
Summary: Shadowgrounds Survivor crashes after viewing the map
Product: Wine
Version: 1.3.15
Platform: x86
URL: http://www.gamershell.com/download_23192.shtml
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=33629)
--> (http://bugs.winehq.org/attachment.cgi?id=33629)
terminal output
In the game the crash always occurs when I switch back to normal mode after
viewing the map (by pressing <Tab>).
Sometimes the game "survives" 2-3 switches between the two modes but eventually
it will crash.
How to reproduce the problem in the demo:
1. Choose only Physx and Windows Media Codecs when the installer asks for it
(native d3dx9_36.dll will be placed in the game directory).
2. Start the game either by survivor.exe or with the launcher.
3. Choose <New Game> from the menu. When you gain control over your character
press <Tab> to switch to map mode then press <Tab> again to get back to normal
mode. This might need to be repeated 2-3 times. Sooner or later the game will
crash.
If I don't use the map mode, the game seems to be stable (I've played for about
30-40 minutes).
I can reproduce the crash with Wine-1.0.1, too.
The crash happens even if I lower the gfx details to the minimum and with
disabled audio.
When starting the game with WINEDEBUG=warn+heap (is that the correct syntax?)
the crash doesn't occur.
Fedora 14 x86
Nvidia GeForce 250 / driver 260.19.36
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25009
Summary: Password Memory 2010 - Titlebar color rendering error
Product: Wine
Version: 1.3.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rsflynn(a)gmail.com
Created an attachment (id=31694)
--> (http://bugs.winehq.org/attachment.cgi?id=31694)
Password Memory 2010 Screenshot
Password Memory 2010 v3.0.3
Download URL:
http://download.cnet.com/Password-Memory-2010/3000-18501_4-10770367.html
Titlebar is not rendered correctly. Half the title bar is in the application
default blue, the other half is black.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26545
Summary: Crysis2: Red color on highlights of Bumpmap/Specular
Highlights
Product: Wine
Version: 1.3.16
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mgavl69(a)juno.com
Bumpmaps are highlighted in red. This goes goes the sky as well as objects.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19469
Summary: ResEdit crashes checking for updates
Product: Wine
Version: 1.1.26
Platform: PC
URL: http://www.resedit.net/ResEdit-UNICODE.7z
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: urlmon
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bunglehead(a)gmail.com
Created an attachment (id=22630)
--> (http://bugs.winehq.org/attachment.cgi?id=22630)
Crash log
ResEdit 1.4.7 (unicode build) crashes checking for updates. Attached log
produced with 'Help -> Check for update' menu command.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21316
Summary: MOPy Fish: Unable to allocate required memory, cannot
continue.
Product: Wine
Version: 1.1.35
Platform: x86-64
URL: http://www.mediafire.com/file/w13znjlvyko/setup-1.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gaming4jc2(a)yahoo.com
This is classic MOPy Fish 1.9a, a free virtual pet for your computer. (
http://en.wikipedia.org/wiki/MOPy_fish )
It fails to start and gives no terminal output even when using winedbg. It
simply says "process terminated".
Url given for the free download.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23124
Summary: Philippine English locale defaults to wrong SUBLANG
Product: Wine
Version: unspecified
Platform: All
OS/Version: All
Status: NEW
Keywords: download, source
Severity: trivial
Priority: P4
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
I understand that following 1.2 .po file are going to be used, so this should
be easier to resolve then.
Philippine English follows American English rules, but currently defaults to
pick up SUBLANG_NEUTRAL which is British English. It should be picking up
SUBLANG_DEFAULT for American English.
I'm not sure if this can be changed before the introduction of .po files but
it's not urgent.
http://en.wikipedia.org/wiki/Philippine_English
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11446
Summary: Gangsters: Wrong 2d rendering
Product: Wine
Version: 0.9.51.
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: directx-ddraw
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wielkiegie(a)gmail.com
Created an attachment (id=10577)
--> (http://bugs.winehq.org/attachment.cgi?id=10577)
Wine messages when starting with OpenGL as DDraw renderer
OpenGL as DirectDraw driver causes unhandled page fault when playing intro (I
tried GDI for testing). When the game starts or after changing menu screen,
main menu is completely black. Graphics can be visible only after pushing any
button in the menu, but releasing mouse button elsewhere. Buttons doesn't
contain any text and colors of whole screen are ugly.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26938
Summary: Leo's RC Simulator menu can't be used
Product: Wine
Version: 1.3.18
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mail(a)3v1n0.net
Created an attachment (id=34362)
--> (http://bugs.winehq.org/attachment.cgi?id=34362)
Output using WINEDEBUG=warn+all
Try to download Leo's RC Simulator [1]. It installs fine, but when running
leofs.exe the top menu bar isn't shown correctly (running it in a wine desktop
it shows as a blue rectangle) and can't be used to control anything.
This issue seems somewhat related to bug 26605.
WINEDEBUG log attached.
[1] http://leobueno.net/PaginaProyectoSoft.php?id=LEORC
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26926
Summary: MeGUI: Preview window cannot change aspect ratio, or
will not open at all.
Product: Wine
Version: 1.2.3
Platform: x86-64
OS/Version: Mac OS X 10.6
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chris.j.leung(a)gmail.com
Created an attachment (id=34344)
--> (http://bugs.winehq.org/attachment.cgi?id=34344)
screenshot of preview window with some minor UI glitches
While attempting to encode a video using the program MeGUI, a preview window
appears which shows filters and effects applied to the video before it is sent
to the encoder.
In many cases, this window does not appear, and a “Fatal error” message appears
with the text “MeGUI encountered a fatal error and may not be able to proceed.
Reason: Value was either too large or too small for a Decimal.”
Wine also prints the following line:
"fixme:variant:VarDecRound semi-stub!"
I noticed this only happens when attempting to preview videos with certain
aspect ratios. Videos of specific sizes, such as 720x480, can be previewed as
they have aspect ratios of 1.5. Other videos, such as widescreen 1280x720
(aspect ratio of 1.7777… repeating) cannot be previewed and display the error.
Interestingly, although you can’t preview the video, you can ignore the error,
continue to encode, and the output file will be the proper size.
If you try previewing a 720x480 video, and then set the aspect ratio to some
never-ending decimal from the dropdown menu, and try to preview that by
clicking the “Preview DAR” box, the error also appears.
I’m guessing there’s something wonky going on with how Wine is handling
numbers?
FYI, the MeGUI requires .NET 3.0, which I installed using "winetricks dotnet30”
I installed Wine via MacPorts repository, using “port install wine”
And somewhat related, while encoding, the progress window that shows % complete
and frame encoded per second doesn’t properly update and returns the same
“fixme” message. Not sure if I should make another report on that, as it’s
closely related.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26785
Summary: SIV incorrectly reports the same CPU time usage for
all it's threads
Product: Wine
Version: 1.3.17
Platform: x86
URL: http://rh-software.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ray(a)pobox.co.uk
Created an attachment (id=34125)
--> (http://bugs.winehq.org/attachment.cgi?id=34125)
Screen Image showing the same CPU time for all threads
I thought this was a bug in SIV and have been trying to fix it, but it
transpires that GetThreadTimes() is implemented by Wine using the times()
function which returns the process rather than the thread CPU times.
The code is line 942 in ntdll/threads.c and is times(&time_buf);
I would like to try and generate a patch to fix this, but I have thus far
failed to find a portable *nix function to use. Please can someone point me in
the right direction?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26750
Summary: SIV fails to display USB device information
Product: Wine
Version: 1.3.17
Platform: x86
URL: http://rh-software.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ray(a)pobox.co.uk
SIV fails to display USB device information please can wine be fixed ? The
first step is to add HCD0 to HCDn for the USB Root Hubs (much the same as for
COM1 to COMn) and then for following IOCTLs would need to be implemented:
IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX
IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION
IOCTL_GET_HCD_DRIVERKEY_NAME
IOCTL_USB_GET_ROOT_HUB_NAME
IOCTL_USB_GET_NODE_CONNECTION_NAME
IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME
IOCTL_USB_GET_NODE_INFORMATION
see http://msdn.microsoft.com/en-us/library/ff537421(v=VS.85).aspx
I realise this is not likely to happen soon.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26609
Summary: Impulse: wrong window size
Product: Wine
Version: 1.3.16
Platform: x86
URL: http://www.impulsedriven.com/downloads/impulse_setup_f
ull.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pavel.ondracka(a)gmail.com
Created an attachment (id=33874)
--> (http://bugs.winehq.org/attachment.cgi?id=33874)
terminal output
Impulse window size is smaller than it should be, (it is cut from right side
and from the bottom) resulting in some content not being displayed.
winetricks dotnet20 is required.
wine-1.3.16-213-gda4ed47
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26604
Summary: AutoCAD 2008: Hang-up after closing preview window
Product: Wine
Version: 1.3.16
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Steps to reproduce:
1) remove ~/.wine
2) winetricks dotnet20
3) install AutoCAD 2008 and autocad2008lockedsp1.exe
4) wine acad.exe
5) ctrl+p
6) choose "DWG to PDF.pc3" in "Printer/plotter" Name
7) press "Preview..." to open preview window
8) close preview window
Behaviour:
Hang-up.
Expected behaviour:
No hang-up.
Terminal output:
>From clicking Preview...
fixme:shell:SHAutoComplete stub
fixme:gdiplus:GdipDrawLineI graphics object has no HDC
fixme:shell:SHAutoComplete stub
fixme:shell:SHAutoComplete stub
err:xrender:get_xrender_format_from_color_shifts No XRender format found!
fixme:shell:SHAutoComplete stub
err:xrender:get_xrender_format_from_color_shifts No XRender format found!
fixme:gdiplus:GdipDrawLineI graphics object has no HDC
fixme:shell:IShellLinkW_fnGetPath (0x5ea0a90): WIN32_FIND_DATA is not yet
filled.
err:xrender:get_xrender_format_from_color_shifts No XRender format found!
fixme:dbghelp:elf_search_auxv can't find symbol in module
fixme:thread:NtQueryInformationThread info class 16 not supported yet
To closing preview window
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26543
Summary: Second press on monthcal drop down button doesn't
working
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nvsa(a)bk.ru
Created an attachment (id=33801)
--> (http://bugs.winehq.org/attachment.cgi?id=33801)
trace with WINEDEBUG=+monthcal
After selecting date in monthcal control by pressing button second press
doesn't create calendar window. After third press application exits with
Segmentation fault.
So user cannon change date using calendar.
Changing date in textbox works.
Bug appears in Medialog software (medical database).
Software is written on Delphi.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26397
Summary: Starsiege: Tribes: prevents cursor from leaving window
Product: Wine
Version: 1.3.15
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: beatme101(a)gmail.com
When running the game Starsiege: Tribes in windowed mode, it is difficult to
move the cursor outside of the game window; it often (not always) brings the
cursor back into the window.
Moving the mouse very slowly usually works to get the cursor out, as does using
alt-tab to change application focus instead.
I've attached the console output made when it pulls the cursor back in but it's
the same as when clicking into the window normally.
"Allow DirectX apps to stop the mouse leaving their window" is unchecked, as I
believe is the Wine default.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26368
Summary: Parent relative paths not working in ITSS Moniker
protocol
Product: Wine
Version: 1.3.14
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ilan(a)cogniview.com
Parent relative paths that use the mk:@MSITStore protocol don't seem to work
correctly.
Test case:
* Download the CHM from here:
http://www.innovasys.com/products/ce/downloadexample.aspx
* Place it in C:\ drive (~/.wine/drive_c) so now you have C:\RealWorld.chm
* Open this URL in iexplore.exe:
mk:@MSITStore:c:\RealWorld.chm::/Images/collapse.gif
This loads an image correctly.
* Now open this URL:
mk:@MSITStore:c:\RealWorld.chm::/Images/../Images/collapse.gif
This tries to access the chm file C:\Images\collapse.gif, and obviously fails.
Note that I used this specific CHM in the test case just because it is publicly
available for download, but any CHM with a folder inside it would work for this
test just the same.
Also note that a similar test in IE on Windows works as expected and loads the
image using any of the URLs.
And lastly, note that if an HTML file inside the CHM refers to a relative path
with "..", the same problem occurs. For example, if there is an IMG tag with
SRC="../Images/whatever.gif" then you get the same problem.
I tested this on Ubuntu 10.10 with wine 1.3.14
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25007
Summary: EssentialPIM Pro 3.74 - Printing Fails to Work
Product: Wine
Version: 1.3.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rsflynn(a)gmail.com
EssentialPIM Pro 3.74
File > Print function fails and causes application error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24993
Summary: Big image maps not loaded in GPSTrack 2008
Product: Wine
Version: 1.3.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kubrick(a)fgv6.net
Hi,
GPSTrack is a proprietary software to manage maps and gps.
It is available for download for a free 15 days trial here :
http://www.gpstrack.com/Programmes/vista/setup.exe
Interesting note from the about box :
"To read and exploit image files, GPSTrack is using an ActiveX component
developped by DataTech (http://www.datatech.com).
This ActiveX can read most of public domain image file formats: BMP,GIF, JPG,
PNG, TIFF, PCX, PhotoCD, etc. ..."
"Small" images (5000x5000 px) loads perfectly on GPSTrack/wine, but big maps,
like 10kx10k px, it doesn't work with wine, the map frame remain grey and
doesn't refresh.
To reproduce the problem, create a big picture in one of the supported formats,
and load it in the app via File->New map.
Regards,
François.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24876
Summary: Explorer++ 1.2 not highlighting listview items
properly after the first time
Product: Wine
Version: 1.3.5
Platform: x86-64
URL: http://www.explorerplusplus.com/download
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=31491)
--> (http://bugs.winehq.org/attachment.cgi?id=31491)
Terminal output
1. Start the program
2. Click once on c: to highlight it
3. Click once on z: to highlight it instead
4. Click once on c: again
On Windows, there's no difference between steps 2 and 4. But here, step four
doesn't highlight c: in blue as expected, although a dotted border still
appears around its name. It also doesn't show the details for drive c: in the
display window.
This doesn't happen with native comctl32 (v6). FWIW, it doesn't happen in
Explorer++ 1.1, either.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24834
Summary: Erratic exceptions when printing with Paywindow
Product: Wine
Version: 1.3.5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: braathwaate(a)whitewaterhill.com
1. Download Paywindow 2010 from this link:
http://www.zpay.com/download.htm
2. Use winetricks to install jet40.dll and mdac28.dll
3. Install Paywindow. Install should work find.
4. Run Paywindow and open the paywin.dxi dummy database
5. Use the menu to select Tools->Report Center.
6. On any of the reports, try to do a Print Preview. Often, but not always, an
exception will be generated.
I tried this on two virgin installations and the results were identical.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24575
Summary: Re: problems with Microinvest Invoice v.3.03.752
Product: Wine
Version: 1.1.42
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nj000a(a)googlemail.com
When tried to print a document from Microinvest Invoice v.3.03.752, the program
just blocks.
Contacted the developer – responded that in Wine the windows do not follow Z
order.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24261
Summary: Edius does not work on WINE
Product: Wine
Version: 1.3.0
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mmdevapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: de.techno(a)gmail.com
Edius is a very powerful video editing tool. It installs well, but after the
dialog where you choose the profile and all... it doesn't move after that...
when you click 'create' nothing happens.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23893
Summary: Selection list window will not accept selection
Product: Wine
Version: 1.3.0
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vanceal(a)sbcglobal.net
Created an attachment (id=29996)
--> (http://bugs.winehq.org/attachment.cgi?id=29996)
copy into the sym folder
I am running LTspice version 4.08e in WINE version 1.3.0 on OpenSUSE 11.2 on an
AMD64 dual core PC. I created the new part in LTspice version 4.03p and when I
upgraded to ver 4.08e I could no longer select a part from the list of models
in the library in the component attribute editor screen. I attached the part
model and library. Copy the files into the proper directory and you should be
able to duplicate the problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23805
Summary: office 2007 ribbon-apps and extended desktop issues
Product: Wine
Version: 1.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sven.plaga(a)fh-deggendorf.de
During my work with Office 2007 i've noticed that it has problems with my
extended desktop environment:
When i switch a ribbon based application like word or excel 2007 from window
mode to full mode everything works on my primary monitor (i can repeat it
without problems).
On the extended monitor the switch from window to full works for the first
time. If the switch is performed a few times (usually two times)
* the window is stuck at the extended monitor and maintaining full mode
and
* all dialog windows (e.g. file open dialog) do not appear because the main
window has a permanent focus (the dialog windows are behind the main program
window and wait for OK --> as the buttons are out-of-reach, the program looks
completely "frozen")
This situation then is permanently maintained because this setting ist stored
in the registry under HKEY_CURRENT_USER
* for Word [Software\\Microsoft\\Office\\12.0\\Word\\Data]
* for Excel [Software\\Microsoft\\Office\\12.0\\Excel\\Options]
Workarround is:
* Word: Delete in [Software\\Microsoft\\Office\\12.0\\Word\\Data] the
REG_BINARY "Settings"
* Excel: Change in [Software\\Microsoft\\Office\\12.0\\Excel\\Options] the
DWORD Maximized from X to 0
and restart the respective programms.
The tested systems configuration was:
* Ubuntu 9.10
* Intel Corporation 4 Series Chipset Integrated Graphics Controller
* Compiz deactivated
* Extended Desktop performed using xrandr
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23780
Summary: Shareaza user windows manager border instead of its
own
Product: Wine
Version: 1.2
Platform: x86
URL: http://shareaza.sourceforge.net/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jaimerave(a)gmail.com
Created an attachment (id=29815)
--> (http://bugs.winehq.org/attachment.cgi?id=29815)
Screenshot of the issue
When you maximize the window the window manager set it's own border to
Shareaza. You can see the issue in the attached screenshot.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23190
Summary: 2gis window occupy not all space as it can
Product: Wine
Version: 1.2-rc3
Platform: x86
URL: http://nsk.2gis.ru/
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: woodroof(a)gmail.com
Created an attachment (id=28852)
--> (http://bugs.winehq.org/attachment.cgi?id=28852)
Not all space occupied in maximize mode
To reproduce execute 2gis and press maximize button
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23103
Summary: CivCity Rome 1.0 crashes on running
Product: Wine
Version: 1.2-rc2
Platform: x86-64
URL: http://www.2kgames.com/civcityrome/civcity.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bojan(a)antonovic.ch
Created an attachment (id=28707)
--> (http://bugs.winehq.org/attachment.cgi?id=28707)
crash log
When you come to the position of actually building your city, the game crashes.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22916
Summary: Program installs fine, but crashes on start
Product: Wine
Version: unspecified
Platform: x86
URL: http://prv.tutor.com/install/netClassroom/Tutor.com%20
Classroom%20Setup.msi
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: trevorolson(a)gmail.com
After installation, when you try to open the program, it tries to open but
crashes before it can open fully. In Windows a login screen appears. In WINE
the entire program simply ceases to run. It just quits before the login screen
appears.
As a tester, you should know that the program should be working if you make it
to the login screen. To fully test the program, you'd need a login and
password though, which you need to work for tutor.com to have.
Thanks for any assistance you can offer!
Trevor
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22144
Summary: Windows LiveScribe software does not work in Wine
Product: Wine
Version: 1.1.33
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ablyth(a)winjeel.com
Windows based software of the LiveScribe software does not work in Wine. It
installs, and the Tray icon can show, but the Desktop application fails to
start up, and the Tray Launcher doesn't detect the LiveScribe pen (hardware)
when connected (via USB).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21995
Summary: Sonic the Hedgehog: The Screen Saver's editor is
mostly blank
Product: Wine
Version: 1.1.40
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=26720)
--> (http://bugs.winehq.org/attachment.cgi?id=26720)
Comparison of the editor with builtin and native ctl3d32.dll
The editor included with this screensaver is pretty much unusable, because the
list of available effects/images/music and the edit window are blank. If the
left or right arrow is clicked to see a different list, the list is visible at
first, but it disappears when clicking on any of the items in the list.
The problem is gone if native ctl3d32.dll is used. The program gives no
terminal output by default, and I don't see an obvious ctl3d debug channel in
the list on the wiki, so let me know what kind of debug log would be useful...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19180
Summary: Race Driver GRID: Game freezes while restarting race
Product: Wine
Version: 1.1.25
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=22168)
--> (http://bugs.winehq.org/attachment.cgi?id=22168)
Wine-1.1.25
I'm using Wine 1.1.25 (compiled from source using gcc version 4.4.0 20090506
(Red Hat 4.4.0-4) ) on Fedora 11 i386.
When i try to restart race the game freezes. The Wine error window is showed
but it's in background. The same problem is after finished race. This problem
doesn't occur every time but its often and easy to catch. Sometimes I can
restart the race every time without a freeze. I noticed that it's depended on
game start where restarts will work every time /restarts won't work every time.
I cut terminal output because this was repeating
fixme:d3d_surface:IWineD3DBaseSurfaceImpl_Blt Filters not supported in software
blit
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18816
Summary: Playing online does not work with World Of Goo
Product: Wine
Version: 1.1.23
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: brayden.hull(a)gmail.com
When playing World Of Goo in latest development version of wine when you try to
use the internet option to play it online it does not connect, in terminal it
shows it sends a HTTP GET to a page but doesn't receive the response.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13198
Summary: Microsoft Pinball Arcade black/blank window in 24bpp
mode
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vanessaezekowitz(a)gmail.com
Created an attachment (id=13030)
--> (http://bugs.winehq.org/attachment.cgi?id=13030)
Screenshot of real 8bpp mode
Microsoft Pinball Arcade (commercial/full version) doesn't work properly in
WINE if you're using a regular, standard-issue 24bpp X session. Intro/menu
screens work, but the 3D content (direct3d? ddraw?) just produces a black
screen.
Steps to reproduce:
0. Obtain a copy of the game (maybe the demo version will do?). cd into your
'drive c' directory and start the game: `wine Program\ Files/Microsoft\
Games/Pinball\ Arcade/Launcher.exe`
1. A movie displays showing a closeup of one of the game's tables.
2. Click on the movie to interrupt it. The title screen appears and looks
fine.
3. Click again, table select menu appears and waits for input.
4. Click on any menu item at the bottom of the window - a dialog related to it
appears as it should.
5. Double-click on one of the tables - the table selection screen gets blacked
out, the window resizes, and the table's loading screen appears all in the same
instant - without repainting the window - the loading screen only painted on
the parts of the window that were already black. So we have a window half
filled with the loading screen and half transparent, showing this browser and
the controlling terminal through it.
6. The loading screen disappears and the window turns solid black. A windows
pointer appears. On the console, the "Cannot change screen BPP" line appears.
7. Clicking around eventually causes the pointer to disappear, probably because
I managed to trigger the insert-coin hot spot followed by the "1 player"
hotspot, thus starting the actual game. Hitting Esc is supposed to bring up a
graphical exit/no-exit dialog, but nothing appears. Blindly hitting "y" puts
me back at the table-select screen as it should. So the actual game is
accepting input, it just isn't showing me anything.
7a. If I try another table, I get the exact same result, including another
"Cannot change screen BPP" line on the console.
8. Double-click the table-select menu's internal Exit button and Wine drops
back to my shell after a couple of seconds.
Actual Results:
Described above - I get a black window instead of a game table.
Expected Results:
Wine should have displayed the table properly and let me play the game.
Notes:
In order to run this game properly, the user *must* have a true 8bpp mode
with StaticColor visual defined in their xorg.conf, and the user *must*
manually run a second, separate X screen (e.g. one accessible with Ctrl-Alt-F8)
in that more with that visual.
Desipte having a known, tested, working 8bpp mode in xorg.conf, Xorg does not
have any kind of ability to switch away from the currently-running depth to
some other mode (e.g. it cannot and never will be able to drop from 24bpp to
8bpp), and is not expected to ever have such a feature. Furthermore, some
users' hardware does not have the ability to run in true 8bpp mode at all, so
this game simply *will not work* on those systems.
ply does not work on some hardware, despite having correct software settings.
The attached screenshot shows what the game looks like in reap 8bpp
"StaticColor" mode, using twm as a window manager (it looks the same without a
window manager).
Versions affected:
All WINE versions from roughly 0.9.31 through the current 1.0 rc1 release.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22450
Summary: Can't disable unixfs
Product: Wine
Version: 1.1.43
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
dlls/shell32/shfldr_unixfs.c claims that you can disable unixfs
by deleting the registry key
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Desktop\Namespace\{9D20AAE8-0625-44B0-9CA7-71889C2254D9}
but unfortunately wine will recreate that key the next time you run
a newer version of Wine.
To repeat, do
rm -rf ~/.wine
wine regedit /d
'HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Desktop\Namespace\{9D20AAE8-0625-44B0-9CA7-71889C2254D9}'
wine notepad # Do File/Open and note that / does not appear in My Computer.
wineserver -w
~/wine-git/wine notepad # Do File/Open and note that / *does* appear.
If we really want to disable unixfs, we may want a configure option
to not even compile it in. I have a patch ready, will send it in.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18211
Summary: Toolbook Runtime 7.0 unhandled exception
Product: Wine
Version: 1.1.20
Platform: PC
URL: ftp://ftp.sumtotalsystems.com/pub/tb2/neuron/70/neuron.e
xe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20702)
--> (http://bugs.winehq.org/attachment.cgi?id=20702)
Wine 1.1.20 console output
S197 How The Universe Works is part of a university course materials.
S197 uses the Toolbook Runtime 7.0, but on calling the app, it immediately
causes an unhandled page fault.
Waiting a few minutes brings up a dialog stating, "Cannot find TB70NET.EXE (or
one of its components)."
S197 is designed specifically for this version and is included in the app's
program folder, so upgrading to a newer version is not an option.
Running TB70RUN.EXE directly causes the same page fault.
To install TB7 directly, I had to set winecfg to Win95 mode.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25723
Summary: PhysX causes major lag in Mirror's Edge.
Product: Wine
Version: 1.3.11
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: H3g3m0n(a)gmail.com
When the PhysX option is enabled (setting in the Video Options) in Mirror's
Edge. When 'physics' things start to occur the game starts to get some major
lag becoming unplayable.
Mirror's Edge doesn't make too much use of PhysX (I believe it was on of the
first games with support for it), afaik it's mostly used for enabling
shattering glass to create shards and maybe some bits of paper on the ground.
As such this only seems to happen at specific points in the game. For example
Chapter 1 Flight->Check Point D. As you are running across the bridge, the
helicopter starts to shoot the glass causing it to shatter.
If you continue on to the next area, at some point (when you go underground) it
suddenly returns to normal speed (most likely it has unloaded the previous
area).
With PhysX set to off, there is no lag but no glass shards.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18010
Summary: Slingplayer video tuning wizard fails
Product: Wine
Version: 1.1.19
Platform: PC
URL: http://download.slingmedia.com/player/pc/SlingPlayer-
Setup-EU-1.5.1.343.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20389)
--> (http://bugs.winehq.org/attachment.cgi?id=20389)
Screenshot of error
Slingplayer has a video tuning wizard to allow things like brightness and
contrast to be set.
The wizard fails at the first step with the message "Advanced Video Options
have been disabled on your computer."
err:ole:CoGetClassObject class {51b4abf3-748f-4e3b-a276-c828330e926a} not
registered
err:ole:CoGetClassObject class {7d8aa343-6e63-4663-be90-6b80f66540a3} not
registered
Both classes are related to the Video Mixing Renderer 9, part of DirectX.
"winetricks directx9" does not workaround the problem.
To get to this point, native quartz, qcap and gdiplus are required to work
around other bugs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25870
Summary: Column headers don't always resize to fit text when
double-clicked
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: turbolad995(a)hotmail.co.uk
When you try to double-click (with the left mouse button) on a column header
WHEN THE MOUSE POINTER SHOWS DOUBLE BLACK ARROWS, like this <-|->
the column is supposed to resize to fit the longest line of text below it
perfectly.
In programs such as Pegasus Mail and many others which use resizeable columns
e.g. 1by1 Player, double-clicking the column header results in any of the
following:
* nothing happens
* messes up the columns - depending on text size
* the column will resize properly
Although trivial, I believe Wine users should report bugs when they are
discovered.
Please test this using 1by1 Player and play around with the font size in the
application's settings (press <F6> to get into the program's settings). Now
try resizing the columns with different font sizes and double-clicking the
vertical lines which separate the columns. Download 1by1 Player:
http://mpesch3.de1.cc/1by1.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16154
Summary: DrawPrim.exe fails to start
Product: Wine
Version: 1.1.9
Platform: PC-x86-64
URL: http://www.geocities.com/SiliconValley/2151/drawprim.zip
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kgbricola(a)web.de
Created an attachment (id=17404)
--> (http://bugs.winehq.org/attachment.cgi?id=17404)
winedbg output from the DrawPrim.exe
The sample app DrawPrim fails to start with a stack overflow. There is also a
description to the app here
http://www.geocities.com/SiliconValley/2151/drawprim.html .
I've attached a winedbg output because the only messages I get in a normal run
are these few lines:
$/home/ricola/software/wine/build/wine DrawPrim.exe
fixme:d3d:IWineD3DImpl_FillGLCaps OpenGL implementation supports 32 vertex
samplers and 32 total samplers
fixme:d3d:IWineD3DImpl_FillGLCaps Expected vertex samplers + MAX_TEXTURES(=8) >
combined_samplers
fixme:win:EnumDisplayDevicesW ((null),0,0x32f89c,0x00000000), stub!
fixme:x11drv:X11DRV_desktop_SetCurrentMode Cannot change screen BPP from 32 to
16
err:d3d:IWineD3DDeviceImpl_SetupFullscreenWindow (0x13d708): Want to change the
window parameters of HWND 0x1002c, but another style is stored for restoration
afterwards
fixme:d3d:WineD3D_ChoosePixelFormat Add OpenGL context recreation support to
SetDepthStencilSurface
err:seh:setup_exception_record stack overflow 1188 bytes in thread 0009 eip
7bc7b3f6 esp 00230e8c stack 0x230000-0x231000-0x330000
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12027
Summary: List in combobox don't disapear when window moved
Product: Wine
Version: 0.9.57.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: patriotyk(a)gmail.com
When we dropping down combobox and after that trying move window, the list of
items in combobox doesn't disapear.
It is reproducible in all applications which used combobox
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24466
Summary: Sid Meier's Pirates! frequent hiccups, temporary
lock-ups
Product: Wine
Version: 1.3.3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=30870)
--> (http://bugs.winehq.org/attachment.cgi?id=30870)
terminal output
Sid Meier's Pirates! (patched to the latest 1.0.2 version) performs badly in
Wine. This issue is described in several test results on the Appdb page of the
game, too.
I can observe the following symptoms:
- After the intro video played, it takes almost 2 minutes to get into the main
menu (without noticeable hdd activity).
- When I get into the game and visit any places in the port (Governor,
Merchant, Tavern etc.) it usually takes the game 15-20 seconds to display the
next screen (although music plays continuously).
- While sailing, the game frequently "freezes" for 2-3 seconds without no
apparent reasons.
When those hiccups occur all animations freeze on the current screen until the
next screen is loaded but music plays fluently.
Reducing the screen resolution, graphical details or disable audio doesn't
help.
I remember playing this game several years ago in a native Win XP without this
issues.
No demo available.
Fedora 13 x86
AMD Athlon 64 x2 4200+
3 GB Ram
Kernel 2.6.34.6
Nvidia 7600 GT / driver 256.53
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24655
Summary: BiDi support broken for writing Arabic
Product: Wine
Version: 1.3.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: usp10
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fahad.alsaidi(a)gmail.com
The next step to improve Arabic support in Wine after fixing bug 24608 is
fixing writing Arabic. Let me explain more, Now when you open Arabic text,
Notepad will display it good enough to read it although it doesn't support full
RTL. The problem is when you try to write something in Arabic. The new text
will not be displayed correctly. It is displayed like that wine doesn't support
Arabic at all. The interesting thing is when you select the text, the text will
be displayed right.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11956
Summary: NoteTab Pro 5.5 Select Clip Library from Library Bar
Product: Wine
Version: 0.9.57.
Platform: PC
URL: http://www.notetab.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lm_hamilton(a)yahoo.com
When selecting a library using the mouse and clicking on the Library Bar, at
the bottom, it is above the Status Bar, the user has to hold the mouse and move
off the Library Bar then release the mouse button, for it to change to the
selected library.
If this procedure is not followed, it closes the clip book, usually on the left
of the screen, but can be put on the right.
This has been an issue with the past several versions of Wine.
This issue also occurs on NoteTab Light and Standard.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.