https://bugs.winehq.org/show_bug.cgi?id=42354
Bug ID: 42354
Summary: I can`t Play Geometry Dash 2.1 ... Working ... but bug
at play FINGERDASH
Product: Wine
Version: 2.0-rc6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: matimieszko70(a)gmail.com
Distribution: ---
Created attachment 57122
--> https://bugs.winehq.org/attachment.cgi?id=57122
Please FIX!
English:
I can not play the level FINGERDASH and other Levels in the HALL OF FLAME ... I
could play before and after the winter holidays as I turned on my linux it
jumped out error. I have so since changed to a newer version of Wine on the old
August zacinało. It worked well on the new version but to time. Please . This
program I like. And yet, and I wanted to highlight that kożysta application
PlayOnLinux. Because I want to play as the wine normally there is no option to
work.
Polish:
Nie moge grać w level FINGERDASH i inne levele w HALL OF FLAME... Mogłem grać
przedtem a po feriach jak włączyłem mojego linuxa to wyskoczył błąd . Mam tak
od czasu kiedy zmieniłem na nowszą wersje wine na starej sie zacinało .
Działało też na nowej wersji ale do czasu . Prosze . Ten program bardzo mi się
podoba . A i chciałem jeszcze zaznaczyć że kożystam z aplikacji PlayOnLinux .
Bo jak chce odtworzyć przez wine normalnie to nie ma opcji żeby działało.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33929
Bug #: 33929
Summary: Winamp+AMIP jn x86_64: fault on read access to
0x00000020 in 32-bit code
Product: Wine
Version: 1.4.1
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: shumkar(a)shumkar.ru
Classification: Unclassified
Winamp 5.6.3 crashes at launch after installing AMIP 2.67. Complains on "page
fault on read access to 0x00000020 in 32-bit code (0x00000020)".
This happens on x86_64 system only. On i686 system the same version of Winamp
with the same versions of AMIP and Wine launches OK.
Debugging output with backtrace attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34451
Bug #: 34451
Summary: divide by zero in diablo 3
Product: Wine
Version: 1.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: directx-dsound
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: joris(a)revivingworlds.org
Classification: Unclassified
Created attachment 45865
--> http://bugs.winehq.org/attachment.cgi?id=45865
The backtrace
When running diablo 3 in wine 1.6 or the later versions of wine 1.5 I always
get this divide by zero error immediately after starting it. I have an nvidia
geforce 680gtx connected to my receiver and tv using hdmi. When i make sure
that the nvidia sound device is busy (using speaker-test) and then try to
launch diablo it runs without errors and sound comes from the speakers
connected to the internal sound card.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38590
Bug ID: 38590
Summary: PES2015 error
Product: Wine-gecko
Version: unspecified
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-gecko-unknown
Assignee: jacek(a)codeweavers.com
Reporter: mehdi.ebrahimii4544(a)gmail.com
Created attachment 51489
--> https://bugs.winehq.org/attachment.cgi?id=51489
pes2015
help me for this error
my macbook is MGXA2
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19416
Summary: WINE doesn't recognize pseudo tty's
Product: Wine
Version: 1.1.26
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: blackshell(a)gmail.com
I'm using a software called 'remserial' ( http://lpccomp.bc.ca/remserial/ ) to
remotely access a fiscal printer. The program creaters a pseudo-tty in the
'client' redirecting to the printer in 'server'. I can connect to the printer
with any other application, except WINE.
I read that WINE uses 'setserial' to grab serial port information, perhaps this
is the source of my problems as 'setserial' doesn't work with pseudo tty's.
Here's the output when i try to run setserial on the pty port:
bash-3.1# setserial /dev/pts/2
Cannot get serial info: Invalid argument
When I try to access the port with WINE, I keep getting EscapeCommFunction()==
FALSE errors.
I also tryed to edit kernel32/comm.c and comment out the lines in the
EscapeCommFunction section that tries to obtain serial information. Now the
error doesn't happen but the application doesn't work neither.
Hope it helps.
Ricardo A. Moura Rubio
NCS Sistema Inteligentes.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38619
Bug ID: 38619
Summary: cannot install it and autodesk trueview 2015 can't be
installed
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: techniquebioelec(a)gmail.com
Distribution: ---
Created attachment 51519
--> https://bugs.winehq.org/attachment.cgi?id=51519
microsoft visual c++ 2012 redistribuable (x64) update 4 bug
the installation worked smoothly until it goes to MS c++ 2012 installation.
0x80070005-access denied
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33950
Bug #: 33950
Summary: Altium Designer 10 (Build 27009), [Regression] Access
violation at address 1065F02C in module 'AdvSch.dll'
Product: Wine
Version: 1.6-rc4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cheeef(a)swissonline.ch
Classification: Unclassified
Created attachment 45096
--> http://bugs.winehq.org/attachment.cgi?id=45096
Wine & Altium designer error messages
When I try to create a new schematic or open an existing one AD10 reports an
"access violation". This is a regression, with wine 1.4 the same procedure
works without errors.
AD10 error message:
"Access violation at address 1065F02C in module 'AdvSch.dll'. Read of address
00000000 at 1065F02C.
Exception Occurred In
OpenObject"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39397
Bug ID: 39397
Summary: I can't use talktalk or BBtalk.It isn't supported
program.
Product: Wine
Version: 1.6.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: phol12711(a)gmail.com
Distribution: ---
Created attachment 52510
--> https://bugs.winehq.org/attachment.cgi?id=52510
Unhandled exception: 0xc0000417 in 32-bit code (0x0152a816). Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:0152a816 ESP:0033f310
EBP:00000000 EFLAGS:00000212( - -- I -A-
BBtalk's website is "http://talktalk.in.th/". I think it is thai software.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22447
Summary: Babaschess consumes a lot of CPU
Product: Wine
Version: 1.1.43
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jskartman(a)gmail.com
Babaschess is using around 20% CPU1 and 20% CPU2 of my dual core E2100 once
opened, without doing nothing. On Windows you can see that the program only
uses around 0-1% CPU.
What is really strange is that when you open the preferences dialog the CPU
drops to 2-3%, a much nicer behavior like in windows.
There is something clearly wrong because the CPU utilization is excessive, when
the program is doing nothing, no animations, no game analisis...
I guess that maybe wine is re-drawing constantly some of the sub-windows when
there is no necessity to redrawn...
This is not a regression I have always observed this behaviour on this program.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33852
Bug #: 33852
Summary: doesn't display engine analysis branches
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wlroberts(a)tru.ca
Classification: Unclassified
In Windows, when running the 'kibitzer', the chess engine displays the best
four lines or variations in the bottom window. These variations are not
displayed when running under Wine. This makes the program almost useless.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.