https://bugs.winehq.org/show_bug.cgi?id=52029
Bug ID: 52029
Summary: Battle.net: A required DLL could not be found, on NTFS
drive
Product: Wine
Version: 6.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rockytvbr+wine(a)gmail.com
Distribution: ---
Created attachment 71029
--> https://bugs.winehq.org/attachment.cgi?id=71029Battle.net Wine log
I have installed Battle.net through Lutris on my NTFS formatted drive, and
after a few days the application fails to launch with "A required DLL could not
be found" error.
I decided to try to tackle this issue because everyone on Lutris says the first
solution to this bug is to disable DXVK, and the other one is to install
Battle.net on a ext4 drive, although this is not an ideal solution for some
users (like me).
I found out that there is a bug that Battle.net cannot find the required DLLs,
even though they exist in the Wine prefix. The problem seems to be related to
case sensitive naming on Linux systems, and even with windows_names mount
option for ntfs-3g, the application cannot find the required DLLs.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51567
Bug ID: 51567
Summary: Battle.net app takes a long time to start
Product: Wine
Version: 6.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: pavel1r(a)gmail.com
Distribution: ---
I'm using Fedora 33 (Mate) with wine installed from winehq fedora repo.
Starting from wine 6.12, Battle.net application takes a lot of time to start
(more than 5 minutes). When started, it does not render content. Sometimes,
after several attepmts to reload, the content is rendered. The issue persists
in 6.13 and 6.14 too. I tried to install in fresh prefix, but with 6.14, after
more than 10 minutes in state "Updating Battle.net update Agent", I gave up.
With 6.11, installation completed in about 1 minute. Attempt to run from fresh
prefix with 6.14 exhibited the same behavior.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47952
Bug ID: 47952
Summary: SonyEricsson PC Suite - Installer hangs
Product: Wine
Version: 4.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 65453
--> https://bugs.winehq.org/attachment.cgi?id=65453
Console output - wine 4.17 (staging)
Hello everyone,
I tried installing the SonyEricsson PC Suite 6.011.00 which I downloaded from
the URL indicated in the form.
The installer starts up but eventually hangs.
There is also an AppDB entry:
https://appdb.winehq.org/objectManager.php?sClass=version&iId=21040
sha256sum Sony_Ericsson_PC_Suite_6.011.00_Web_DEU.exe
644c7b34adebec50d3e38e53865e31b1af26ae7a376bda420b88b4a7a6ad17ad
Sony_Ericsson_PC_Suite_6.011.00_Web_DEU.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52629
Bug ID: 52629
Summary: Crash upon start
Product: Wine
Version: 7.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: winehq(a)jonass.user.lysator.liu.se
Distribution: ---
Created attachment 71950
--> https://bugs.winehq.org/attachment.cgi?id=71950
Console output in terminal where application is started
When starting the application crashes. May be related to "wine: Unhandled
exception 0xc0000090" in the output.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45482
Bug ID: 45482
Summary: jade empire default cpu affinity is only with cpu1 and
performance are dropped
Product: Wine
Version: 3.12
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andy86(a)fastwebnet.it
Distribution: ArchLinux
If don't know is a valid wine bug or a game bug, but reading appdb seem not
present on old wine version < 3.7 or less.
When game is started performance is very poor, seem < 10 fps in main menu,
unplayable at all.
Investigating I discovered that game use only 25% of cpu at default, looking
for the cause, I check cpu affinity in wine taskmgr and it's have just one
check of four (cpu1).
I check all box, and game start to use more of 25% cpu, and performance
increase to 60fps stable.
Problem is that cpu affinity isn't saved, and operation need repeat every time
that game is started.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12027
Summary: List in combobox don't disapear when window moved
Product: Wine
Version: 0.9.57.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: patriotyk(a)gmail.com
When we dropping down combobox and after that trying move window, the list of
items in combobox doesn't disapear.
It is reproducible in all applications which used combobox
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54901
Bug ID: 54901
Summary: Medieval II Total War some units partly invisible with
d3dx9_30 as builtin
Product: Wine
Version: 8.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: d3d-util
Assignee: wine-bugs(a)winehq.org
Reporter: Blisto(a)protonmail.com
Distribution: ---
Created attachment 74406
--> https://bugs.winehq.org/attachment.cgi?id=74406
Log of game through Wine with Windows steam.
In Medieval II Total War parts of some units are invisible when the d3dx9_30
dll is set as builtin.
An easy repro is to load up historical battle "Battle of Agincourt" and look at
your army leader. His head is missing.
Other units such as later era heavy armor units might have their whole torso
missing
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50111
Bug ID: 50111
Summary: osu! crashes since 20201110 version with Wine Mono
Product: Wine
Version: 5.21
Hardware: x86-64
URL: https://m1.ppy.sh/r/osu!install.exe
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: aidas957(a)gmail.com
Regression SHA1: d1472b302d3931074da50bc6ba6571a31a8c76c6
Distribution: ArchLinux
Created attachment 68605
--> https://bugs.winehq.org/attachment.cgi?id=68605
osu! 20201110 Wine Mono log
When osu! got updated to the 20201110 update, the game kinda starts up. but
later shows an error dialog and message attached below
Running osu! with winetricks dotnet40 makes the game work again
The Wine log is also attached but I don't think it's important
Note: I can't attach multiple files for some reason (and keywords don't exist)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48080
Bug ID: 48080
Summary: Oregon Trail II will not start on 32-bit
Product: Wine
Version: 4.19
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sebastian(a)stillion.com
Distribution: ---
Created attachment 65631
--> https://bugs.winehq.org/attachment.cgi?id=65631
Detailed report of the bug
The 32-bit version of Oregon Trail II will not run. It will crash if you try to
run it. Does not happen on the latest version of Windows 10.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44699
Bug ID: 44699
Summary: Clang 6.0 fails to run under wine
Product: Wine
Version: 3.0
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
Assignee: wine-bugs(a)winehq.org
Reporter: martellmalone(a)gmail.com
Distribution: ---
This is the current output when running clang under wine.
```
fixme:file:FindFirstFileExW flags not implemented 0x00000002
fixme:file:FindFirstFileExW flags not implemented 0x00000002
fixme:file:FindFirstFileExW flags not implemented 0x00000002
fixme:file:FindFirstFileExW flags not implemented 0x00000002
fixme:crypt:CRYPT_LoadProvider Failed to load dll
L"C:\\windows\\system32\\rsaenh.dll"
LLVM ERROR: Could not acquire a cryptographic context: Unknown error
(0x8009001D)
```
Here is the line it currently fails on.
https://github.com/llvm-mirror/llvm/blob/release_60/lib/Support/Windows/Pro…
This could be possibly related to #44061
To reproduce this you can run the following docker build script which build
llvm and clang and then cross compiles it for windows with mingw-w64.
Executing the resulting clang on a simple c source file results in the error.
https://github.com/martell/mingw-w64-clang/blob/master/Dockerfile
This is an x64 application.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37246
Bug ID: 37246
Summary: Old C&C titles freeze after the map is loaded.
Product: Wine
Version: 1.7.2
Hardware: x86-64
URL: https://appdb.winehq.org/objectManager.php?sClass=vers
ion&iId=4242
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tyrfing(a)mail.ru
Created attachment 49534
--> https://bugs.winehq.org/attachment.cgi?id=49534
Terminal Output while freezing :)
Hi.
I tried to play Command and Conquer RA II (with and without Yuris Revenge) and
Tiberian Sun. Shortly after the map is loaded (Campaign or Skirmish) the game
freezes, and the sound loops.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44812
Bug ID: 44812
Summary: MSYS2 applications need NtQueryInformationProcess
'ProcessQuotaLimits' class support
Product: Wine
Version: 3.4
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: focht(a)gmx.net
Distribution: ---
Hello folks,
to track
https://github.com/wine-staging/wine-staging/tree/master/patches/ntdll-Proc…
Unfortunately there is little information/details, I just found this:
https://wine-staging.com/news/2015-11-01-release-1.7.54.html
--- quote ---
Implement stub for ProcessQuotaLimits info class (MSYS2, Wine Staging Bug #570)
--- quote ---
Source:
https://source.winehq.org/git/wine.git/blob/HEAD:/dlls/ntdll/process.c#l196
--- snip ---
174
/******************************************************************************
175 * NtQueryInformationProcess [NTDLL.@]
176 * ZwQueryInformationProcess [NTDLL.@]
177 *
178 */
179 NTSTATUS WINAPI NtQueryInformationProcess(
180 IN HANDLE ProcessHandle,
181 IN PROCESSINFOCLASS ProcessInformationClass,
182 OUT PVOID ProcessInformation,
183 IN ULONG ProcessInformationLength,
184 OUT PULONG ReturnLength)
185 {
186 NTSTATUS ret = STATUS_SUCCESS;
187 ULONG len = 0;
188
189 TRACE("(%p,0x%08x,%p,0x%08x,%p)\n",
190 ProcessHandle,ProcessInformationClass,
191 ProcessInformation,ProcessInformationLength,
192 ReturnLength);
193
194 switch (ProcessInformationClass)
195 {
196 UNIMPLEMENTED_INFO_CLASS(ProcessQuotaLimits);
...
--- snip ---
Regards
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54232
Bug ID: 54232
Summary: Paint tool sai 2 does not sync with the cursor
Product: Wine
Version: 8.0-rc2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: nazizeakz938(a)gmail.com
Distribution: ---
When using paint tool sai 2 the brush and in application cursor are rendered
lower than the actual position of the cursor.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24466
Summary: Sid Meier's Pirates! frequent hiccups, temporary
lock-ups
Product: Wine
Version: 1.3.3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=30870)
--> (http://bugs.winehq.org/attachment.cgi?id=30870)
terminal output
Sid Meier's Pirates! (patched to the latest 1.0.2 version) performs badly in
Wine. This issue is described in several test results on the Appdb page of the
game, too.
I can observe the following symptoms:
- After the intro video played, it takes almost 2 minutes to get into the main
menu (without noticeable hdd activity).
- When I get into the game and visit any places in the port (Governor,
Merchant, Tavern etc.) it usually takes the game 15-20 seconds to display the
next screen (although music plays continuously).
- While sailing, the game frequently "freezes" for 2-3 seconds without no
apparent reasons.
When those hiccups occur all animations freeze on the current screen until the
next screen is loaded but music plays fluently.
Reducing the screen resolution, graphical details or disable audio doesn't
help.
I remember playing this game several years ago in a native Win XP without this
issues.
No demo available.
Fedora 13 x86
AMD Athlon 64 x2 4200+
3 GB Ram
Kernel 2.6.34.6
Nvidia 7600 GT / driver 256.53
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53561
Bug ID: 53561
Summary: Command and Conquer 3 Kane's Wrath Installer fails
during component selection.
Product: Wine
Version: 7.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hibbsncc1701(a)gmail.com
Distribution: ---
Created attachment 72925
--> https://bugs.winehq.org/attachment.cgi?id=72925
+msi log of CNC3 Kane's Wrath install attempt.
When installing the game in Advanced install type mode (to change the
destination install directory) the installer fails to continue past the
component selection screen, displaying the error: "At least one language pack
must be selected"
The default component selection includes the language pack, and even
deselecting and re-selecting it does not fix the error. Making the installer
unable to proceed.
This can be worked around by using the "Recommended" install type, but that
means the user must manually change the game's installation directory after the
game is installed.
It should also be noted that changing the install directory causes the
installer to display "_BrowseProperty" as the selected path after closing the
folder selection dialog.
The original game Command and Conquer 3 also has the same installer bug.
An +msi log is attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34003
Bug #: 34003
Summary: File save problem with Visual Cadd 6.0
Product: Wine
Version: 1.5.31
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: purevw(a)wtxs.net
Classification: Unclassified
Created attachment 45182
--> http://bugs.winehq.org/attachment.cgi?id=45182
A binary crash report generated by Visual Cadd 6.0
When trying to do a normal file save (with thumbnail written into the file) in
Visual Cadd 6.0 the program crashes. The crash only occurs when running under
wine, as opposed to running in Windows.
I found a workaround that seems to point to the problem. I found that if I
clear the check-box for "Show Preview" in the file save dialog box, the file
saves normally. Tri-tools.com has been very cooperative in offering help,
rather than simply saying "We don't support Linux" as so many developers do
when asked for help. Here is a paste of their latest response to information
that I had given them:
>> If a report file is generated, it will be stored in your Temp folder. The >>file will start with VC and have an extension of .vccrd.
>>
>>The crash info that you already submitted was sufficient to find the cause, >>though. Wine is failing to correctly create the bitmap and VCADD does not >>handle the failure properly. Since the bitmap is not being created anyhow, >>turning off Preview is the best solution for now. We'll work on a fix for the >>crash, but we won't be able to create the preview unless Wine cooperates.
I'll attache the created error report, but it appears to be a binary file. I
am able to open it with Kdevelop 4 but have no idea what to do with the
information. Perhaps it will give more detailed information as to what is
happening.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24655
Summary: BiDi support broken for writing Arabic
Product: Wine
Version: 1.3.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: usp10
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fahad.alsaidi(a)gmail.com
The next step to improve Arabic support in Wine after fixing bug 24608 is
fixing writing Arabic. Let me explain more, Now when you open Arabic text,
Notepad will display it good enough to read it although it doesn't support full
RTL. The problem is when you try to write something in Arabic. The new text
will not be displayed correctly. It is displayed like that wine doesn't support
Arabic at all. The interesting thing is when you select the text, the text will
be displayed right.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47206
Bug ID: 47206
Summary: Call from 0x7b453193 to unimplemented function
mscoree.dll.GetProcessExecutableHeap, aborting
Product: Wine
Version: 4.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: htl10(a)users.sourceforge.net
Distribution: ---
I think this is visual studio 2015 community edition. Am trying to do:
wine myplace.../drive_c/windows/Microsoft.NET/Framework/v4.0.30319/MSBuild.exe
myproject.vcxproj
Got unimplemented function mscoree.dll.GetProcessExecutableHeap error.
Running Wine Staging 4.8 .
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28716
Bug #: 28716
Summary: LNToGoogle is unable to connect to google calendar -
thinks it's behind a proxy
Product: Wine
Version: 1.3.24
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: robert.munteanu(a)gmail.com
Classification: Unclassified
1. Download program from http://sourceforge.net/projects/lntogoogle/
2. Install mono ( winetricks mono210 )
3. Run the program and enter Google Calendar username/passoword ( not
necessarily valid ones )
Instead of getting a login success or error message, I am informed that I am
possibly behind a proxy which requires username/passowrd to connect to the
internet.
Terminal output:
fixme:gdi:ExtCreatePen Hatches not implemented
err:ole:CoGetClassObject class {29131539-2eed-1069-bf5d-00dd011186b7} not
registered
err:ole:create_server class {29131539-2eed-1069-bf5d-00dd011186b7} not
registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {29131539-2eed-1069-bf5d-00dd011186b7}
could be created for context 0x15
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11956
Summary: NoteTab Pro 5.5 Select Clip Library from Library Bar
Product: Wine
Version: 0.9.57.
Platform: PC
URL: http://www.notetab.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lm_hamilton(a)yahoo.com
When selecting a library using the mouse and clicking on the Library Bar, at
the bottom, it is above the Status Bar, the user has to hold the mouse and move
off the Library Bar then release the mouse button, for it to change to the
selected library.
If this procedure is not followed, it closes the clip book, usually on the left
of the screen, but can be put on the right.
This has been an issue with the past several versions of Wine.
This issue also occurs on NoteTab Light and Standard.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39983
Bug ID: 39983
Summary: wine cannot work in any version, possibly the reason
for graphics card driver
Product: Wine
Version: 1.9.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: chxp_moon(a)163.com
Distribution: ---
Created attachment 53423
--> https://bugs.winehq.org/attachment.cgi?id=53423
start winecfg after install wine
I first install ubuntu 14.04 on my new computer, if I update ubuntu before I
install wine1.6 (sudo apt-get install wine1.6), it show wine1.6 depends on
wine1.6-i386 (sudo apt-get install wine1.6-i386) and it cannot install, when I
install wine1.6-i386, it show wine1.6-i386 depends on wine1.4 and so on ...
(when I install xorg-edgers, I can install wine1.6 or wine1.8 (sudo apt-get
install wine1.6), however, the problem mention following still exist.)
Furhter, I reinstall the ubuntu 14.04 and install wine before I update the
systems. Wine1.6 is installed, however, when I start winecfg it show the error
of 'gdi32' error (see attachment).
I tried the wine1.8 and wine1.9.1 and also tried the ubuntu15.10, winecfg never
correctly started. And I also compile the 1.6 and 1.8 from source, it compile
right but cannot correctly started with same error.
I doubt the driver of my computer or some library of drive corrupt with wine.
my system and my computer information is here:
I using ubuntu 15.10 newly. The Graphic system: Intel® HD Graphics 5300
(Broadwell GT2) .
I think mesa library may corrupt with wine?
> uname -a
Linux UX305FA 4.2.0-22-generic #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015
x86_64 x86_64 x86_64 GNU/Linux
> cat /proc/version
Linux version 4.2.0-22-generic (buildd@lcy01-22) (gcc version 5.2.1 20151010
(Ubuntu 5.2.1-22ubuntu2) ) #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015
> lspci
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated
Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo
Device (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller
(rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI
Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1
(rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4
(rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
> hwinfo --short
cpu:
Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 2600 MHz
Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 2683 MHz
Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 2600 MHz
Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 2788 MHz
graphics card:
Intel VGA compatible controller
sound:
Intel Audio device
Intel Audio device
storage:
Intel SATA controller
network:
wlan0 Intel WLAN controller
network interface:
lo Loopback network interface
wlan0 WLAN network interface
disk:
/dev/sda SanDisk SD7SN3Q5
bios:
BIOS
bridge:
Intel Host bridge
Intel PCI bridge
Intel PCI bridge
Intel ISA bridge
hub:
Linux 4.2.0-22-generic xhci-hcd xHCI Host Controller
Linux 4.2.0-22-generic xhci-hcd xHCI Host Controller
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54116
Bug ID: 54116
Summary: 008c:err:setupapi:SetupDefaultQueueCallbackW copy
error 1812
Product: Wine
Version: 8.0-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: aros(a)gmx.com
Distribution: ---
Can we please not have this error for Wine 8.0?
You can see it for all applications including the built-ins.
For Wine 8.0-rc1, completely new prefix, notepad:
[birdie@zen ~]$ notepad
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0048:fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0050:fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0050:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr
0x80004002
0050:err:ole:CoMarshalInterface Failed to marshal the interface
{6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
0050:err:ole:apartment_get_local_server_stream Failed: 0x80004002
0050:err:ole:start_rpcss Failed to open RpcSs service
0048:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr
0x80004002
0048:err:ole:CoMarshalInterface Failed to marshal the interface
{6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
0048:err:ole:apartment_get_local_server_stream Failed: 0x80004002
0048:fixme:imm:ImeSetActiveContext (0001002E, 0): stub
0048:fixme:imm:ImmReleaseContext (00010020, 0001002E): stub
002c:fixme:imm:ImeSetActiveContext (0001004E, 1): stub
002c:fixme:imm:ImmReleaseContext (0001004C, 0001004E): stub
008c:err:setupapi:SetupDefaultQueueCallbackW copy error 1812
L"@C:\\windows\\system32\\drivers\\wineusb.sys,-1" ->
L"C:\\windows\\inf\\wineusb.inf"
00e8:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005
00e8:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005
00e8:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005
00e8:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005
wine: configuration in L"/home/birdie/.wine" has been updated.
010c:fixme:imm:ImeSetActiveContext (00030062, 1): stub
010c:fixme:imm:ImmReleaseContext (00030048, 00030062): stub
[birdie@zen ~]$ wine client error:68: write: Bad file descriptor
wine client error:b4: write: Bad file descriptor
wine client error:11c: write: Bad file descriptor
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50210
Bug ID: 50210
Summary: S.T.A.L.K.E.R.: Call of Pripyat needs
D3DX11GetImageInfoFromMemory implementation
Product: Wine
Version: 5.22
Hardware: x86-64
OS: Linux
Status: NEW
Severity: minor
Priority: P2
Component: directx-d3d-util
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Enhanced full dynamic lighting (DX11)
fixme:d3dx:D3DX11GetImageInfoFromMemory src_data 08D75427, src_data_size 65664,
pump 00000000, img_info 0031D0C0, hresult 00000000 stub!
wine-5.22-195-gcbca9f847f6
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39711
Bug ID: 39711
Summary: The program crashes after some time of running.
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jamshed21(a)gmail.com
Distribution: ---
Created attachment 52960
--> https://bugs.winehq.org/attachment.cgi?id=52960
The program crashes after some time of running.
The program crashes after some time of running.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51984
Bug ID: 51984
Summary: Logos 9 Bible Software (.NET 4.7 app) regression
selection popups no longer show
Product: Wine
Version: 6.20
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: johnpgoodman(a)gmail.com
Distribution: ---
Created attachment 70971
--> https://bugs.winehq.org/attachment.cgi?id=70971
terminal output from moment after selecting text.
Selecting text in the app causes a popup. This popup no longer shows in 6.20
staging if selecting left to right. If selecting right to left it appears
sometimes after a delay. This is a regression, in wine 6.19 and for many
versions before it was instant.
I've attached the terminal output from the moment before selection to the
moment after selection.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11317
Summary: Need for Speed II Demo - hangs on smp machine
Product: Wine
Version: 0.9.53.
Platform: Other
URL: http://files.filefront.com/nfs2demoexe/;3978828;/fileinf
o.html
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeffzaroyko(a)gmail.com
Need for Speed II, a multithreaded game works on single cpu machines, does not
work on SMP machine.
wine-0.9.53, Ubuntu 7.04, nVidia 8800GTS, Intel(R) Core(TM)2 Quad CPU @ 2.4GHz
the point at which things go wrong isn't always the same, sometimes part of the
intro video clip display other times it will hang before, if you adjust the
priority of the process it may get a little further but still goes pearshaped.
err:ntdll:RtlpWaitForCriticalSection section 0x7bc8f684 "loader.c:
loader_section" wait timed out in thread 001a, blocked by 0018, retrying (60
sec)
wine-0.9.53, Ubuntu 7.10, nVidia FX 5200, Intel(R) Celeron(R) CPU 2.40GHz
works flawlessly.
I can't test on a SMP windows machine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45471
Bug ID: 45471
Summary: No background music in AdAstra (DirectMusicSegment
doesn't loads MIDI files)
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-dmusic
Assignee: wine-bugs(a)winehq.org
Reporter: mstefani(a)winehq.org
Distribution: ---
Follow up to bug #31829. While that fixes the crash at startup there is still
no background music in AdAstra:
0009:fixme:dmime:seg_IPersistStream_Load MIDI file loading not supported
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37806
Bug ID: 37806
Summary: Black screen when starting Rocky Memphis and the
Temple of Ophuxoff
Product: Wine
Version: 1.7.30
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sha256sum(a)gmail.com
Distribution: ---
Rocky Memphis is a free indie game which can be downloaded from
http://rocky.ovine.net/download.php
when starting the game I get a black window and the CPU goes to 100%
All I see is
/tmp$ wine Rocky.exe
fixme:winediag:start_process Wine-Compholio is a Wine testing version
containing experimental patches.
fixme:winediag:start_process Please don't report bugs at winehq.org and use our
issue tracker instead:
fixme:winediag:start_process https://github.com/compholio/wine-compholio/issues
fixme:process:SetProcessDEPPolicy (0): stub
fixme:process:SetProcessDEPPolicy (2): stub
fixme:winediag:AUDDRV_GetAudioEndpoint Winepulse is not officially supported by
the wine project
fixme:winediag:AUDDRV_GetAudioEndpoint For sound related feedback and support,
please visit http://ubuntuforums.org/showthread.php?t=1960599
/tmp$ uname -a
Linux localhost.localdomain 3.17.7-200.fc20.x86_64 #1 SMP Wed Dec 17 03:35:33
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
/tmp$ rpm -qa|grep wine|sort
mingw32-wine-gecko-2.24-1.fc20.noarch
wine-1.7.30-1.fc20.i686
wine-alsa-1.7.30-1.fc20.x86_64
wine-arial-fonts-1.7.30-1.fc20.noarch
wine-capi-1.7.30-1.fc20.i686
wine-cms-1.7.30-1.fc20.i686
wine-common-1.7.30-1.fc20.noarch
wine-core-1.7.30-1.fc20.i686
wine-core-1.7.30-1.fc20.x86_64
wine-courier-fonts-1.7.30-1.fc20.noarch
wine-desktop-1.7.30-1.fc20.x86_64
wine-filesystem-1.7.30-1.fc20.noarch
wine-fixedsys-fonts-1.7.30-1.fc20.noarch
wine-fonts-1.7.30-1.fc20.noarch
wine-ldap-1.7.30-1.fc20.i686
wine-marlett-fonts-1.7.30-1.fc20.noarch
wine-mono-4.5.2-4.fc20.noarch
wine-ms-sans-serif-fonts-1.7.30-1.fc20.noarch
wine-openal-1.7.30-1.fc20.i686
wine-pulseaudio-1.7.30-1.fc20.i686
wine-small-fonts-1.7.30-1.fc20.noarch
wine-symbol-fonts-1.7.30-1.fc20.noarch
wine-systemd-1.7.30-1.fc20.noarch
wine-system-fonts-1.7.30-1.fc20.noarch
wine-tahoma-fonts-1.7.30-1.fc20.noarch
wine-twain-1.7.30-1.fc20.i686
wine-wingdings-fonts-1.7.30-1.fc20.noarch
wine-wow-1.7.30-1.fc20.i686
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34419
Bug #: 34419
Summary: Wine Game running Issue
Product: Wine
Version: 1.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: zorw2016(a)ymail.com
Classification: Unclassified
For some reason Wine no Longer Run's Pylotro DDO Laucher and Wine Freezes up on
DDO on Sayin it "Installing Pre-Req's" or "initializing" or "downloading
EN-Splash-screen" the 1 Downloading EN splash screen works but it takes like 10
Min's to do it every time u start up the DDO Client and for Pylotro it wont
Load up the Info for user name or Server choice. it says like DDO client has
Initialising, please wait...
Available languages checked.
But wont load any thing else any more as i can see done made sure that it was
Routed i know that 100% sure its Routed to its Files it needs just wont do any
thing any more with DDO
Just now got this resently and ima not sure if this is good or what hope it
helps on this info--V
E04] Error accessing GLS data centre.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50999
Bug ID: 50999
Summary: Adobe Creative Cloud can't be installed
Product: Wine
Version: 6.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: msdobrescu(a)gmail.com
Distribution: ---
Created attachment 69842
--> https://bugs.winehq.org/attachment.cgi?id=69842
Simple log
Adobe Creative Cloud shows a popup with the message "The application cannot be
installed on your current operating system", then closes.
I use wine-6.4 (Staging) under Sabayon on a Windows 10 64 bit profile.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41641
Bug ID: 41641
Summary: Final Fantasy XI: incorrect face culling; no glitches
when disabled
Product: Wine
Version: 1.9.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: partyheld(a)gmail.com
Distribution: Debian
Created attachment 56014
--> https://bugs.winehq.org/attachment.cgi?id=56014
Incorrect face culling causes major graphical glitches.
Final Fantasy XI is suffering major graphical glitches because triangles are
culled incorrectly.
Disabling the two calls to glEnable(GL_CULL_FACE) in
"wine/dlls/wined3d/state.c" makes the glitches disappear and the game is
rendered perfectly.
I first observed this in the Debian/testing build (1.8.5-1) and also found this
to be the case when building 1.9.22 from source.
I used the Debian Linux kernel linux-image-4.7.0-1-amd64, as well as a
self-compiled 4.9.0-rc3 with Mesa 12.0.3.
GPU: "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
The graphics flicker a lot when moving the camera even slightly, i.e. suddenly
other triangles get culled.
I'm not using any library overrides.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45520
Bug ID: 45520
Summary: Install Shield fails on 64bit prefix with Silent
install
Product: Wine
Version: 3.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: oleaut32
Assignee: wine-bugs(a)winehq.org
Reporter: duhowpi(a)gmail.com
Distribution: ---
Created attachment 61905
--> https://bugs.winehq.org/attachment.cgi?id=61905
Install error log
Following bug 24611, when installing Final Fantasy XI Online: PlayOnline
Viewer, with the parameters "/S /v/qn" for silent installation, no files are
being installed at Program Files. (using Windows 7 compatibility)
If I run the manual installation (Next, next...), works without problems.
Installer download:
http://www.playonline.com/ff11eu/download/media/install_win.html
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20694
Summary: Image filetypes with images of the music are saved in
Windows, but not WINE/Mozart10.
Product: Wine
Version: 1.1.33
Platform: PC
URL: http://www.mozart.co.uk/programs/mzsetup.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: let02do(a)earthlink.net
Mozart is a music notation and score editing program.
The latest version of the App, Mozart10, uses calls to the
Windows functions for handling image files and is mostly
broken. Its previous version, Mozart9, used a third party
library to process image files, and that worked with no
incident in WINE, but now that Windows functions are used,
there's no joy in this area. My WINE version is wine-1.1.33
with a clean install.
Attempting to save image files of a score in Mozart10, fails
with an error message "Failed to save file..." for file
extensions *.gif, *.jpg, *.tiff . There are no wine console
messages.
For files with extension *.png and *.bmp, Mozart10 saves a file,
but with no image in it. Files with extension *.emf
(Windows encapsulated meta file <i.e.,paint>) are saved with only
part of the image correctly displayed.
To sum up: file types with extensions: *.gif, *.jpg, *.tif,
*.png, *.bmp, *.emf are saved with images of the music score
in Windows XP, Vista, and Win7, but this does not work in
wine-1.1.33/Mozart10.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43052
Bug ID: 43052
Summary: ChessBase 14 - crashes right after start
Product: Wine
Version: 2.8
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: blizzard(a)sachlevice.eu
Distribution: ---
Created attachment 58215
--> https://bugs.winehq.org/attachment.cgi?id=58215
whole program run log
I attach whole log from start to crash from console.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26372
Summary: emulator of the TI Calculator
Product: Wine
Version: 1.2.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: honeycuttaaron3(a)gmail.com
Once the TI Calculator emulator launches then the calculator takes the
background and the buttons are not visible.
TI-83 Plus Flash Debugger Program.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54378
Bug ID: 54378
Summary: VrtuleTree calls unimplemented function
ntoskrnl.exe.ExGetPreviousMode
Product: Wine
Version: 8.0
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: ntoskrnl
Assignee: wine-bugs(a)winehq.org
Reporter: alexhenrie24(a)gmail.com
Distribution: ---
Created attachment 73946
--> https://bugs.winehq.org/attachment.cgi?id=73946
Console output
A black terminal window briefly appears when the program starts, but it does
not appear after stubbing ExGetPreviousMode, KeAcquireGuardedMutex, and
KeReleaseGuardedMutex.
$ sha256sum VrtuleTree.zip
dfdf4d01c16517b3f4528799000f66eb34836549a8130e654a7d469c3febb8ad
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46030
Bug ID: 46030
Summary: Trackmania Unlimiter crashes at startup
Product: Wine
Version: 3.18
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bernhard.gebetsberger(a)gmx.at
Distribution: ---
Created attachment 62606
--> https://bugs.winehq.org/attachment.cgi?id=62606
Crashlog
Trackmania Unlimiter(1.3) crashes immediately after selecting an account at the
account selection screen.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28170
Summary: "Text Service and Input Languages" crash:
Unimplemented function USER32.dll.LoadKeyboardLayoutEx
called
Product: Wine
Version: 1.3.26
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Created an attachment (id=36090)
--> (http://bugs.winehq.org/attachment.cgi?id=36090)
Log: unimplemented function USER32.dll.LoadKeyboardLayoutEx
1. copy native input.dll, sptip.dll, and sapi.dll
2. regsvr32 sptip.dll for class {dcbd6fa8-032f-11d3-b5b1-00c04fc324a1},
regsvr32 sapi.dll for class {a910187f-0c7a-45ac-92cc-59edafb77b53}
3. import keyboard_layouts.reg with regedit, which is download from
http://www.geekstogo.com/forum/index.php?app=core&module=attach§ion=att…
( referer url:
http://www.geekstogo.com/forum/topic/222396-cant-change-language-settings-f…
)
4. start the "Text Service and Input Languages" :
$ wine control input.dll
(notes: without step 3, there will be an "incompatible keyboard driver
detected" error, and the input.dll control panel can not display complete, I'm
not sure if it this a wine bug)
5. click ok, then crash:
fixme:msvcrt:_setmbcp trail bytes data not available for DBCS codepage 0 -
assuming all bytes
fixme:msctf:InputProcessorProfiles_GetLanguageList Semi-STUB:(0x13afd0)
wine: Call from 0x7bc4c896 to unimplemented function
USER32.dll.LoadKeyboardLayoutEx, aborting
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32931
Bug #: 32931
Summary: FFXI Amazon Downloader crashes when trying to download
install files
Product: Wine
Version: 1.5.23
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wininet
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: btwisgac23(a)gmail.com
Classification: Unclassified
I ran a successful bisect, and here is the output. This bug has been present
since 1.3.18 and is still present in 1.5.23.
$ git bisect good
ccd11eb7d6720ee5242e619851f41908f285e8f9 is the first bad commit
commit ccd11eb7d6720ee5242e619851f41908f285e8f9
Author: Jacek Caban <jacek(a)codeweavers.com>
Date: Sat Apr 2 15:20:33 2011 +0200
wininet: Abstract different transfer and content encoding reading to
layered structures.
:040000 040000 6a31f2cf8265be180b9267ead2317512555f5174
1c317ffca5fdb9434933f12120419a240a50f117 M dlls
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47577
Bug ID: 47577
Summary: Final Fantasy XI crashes
Product: Wine
Version: 3.0.4
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: marie-christin-schaarschmidt(a)web.de
Final Fantasy XI crashes randomly. Sometimes after the bug I can move my
character and everything is fine. But sometimes nothing happens.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38621
Bug ID: 38621
Summary: D3DXCompileShader errors
Product: Wine
Version: 1.7.42
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: isakov-sl(a)bk.ru
Distribution: ---
This is again my game HeroesVI.
I reverted back all dll to builtin and set trace+d3dx
----
trace:d3dx:D3DXCompileShader data "matrix mc0 : register( c0 );\nmatrix mc1 :
register( c4 );\nmatrix mc2 : register( c8 );\nstruct VSData\n{\n float4 pos :
POSITION;\n float3 nrm : NORMAL; \n float2 txc : TEXCOORD;\n};\nVSData
vsMain( VSData input )\n{\n VSData output;\n float4 imm;\n imm = mul(
input.pos, (float4x4)mc0 );\n "..., length 721, defines 0x0, include 0x0,
function "vsMain", profile "vs_3_0", flags 0, shader 0x32d464, error_msgs 0x0,
constant_table 0x0.
err:d3dcompiler:compile_shader HLSL shader parsing failed.
trace:d3dx:D3DXCompileShader data "struct VSData\n{\n float4 pos : POSITION;\n
float2 txc : TEXCOORD;\n};\nVSData vsMain( VSData input )\n{\n VSData
output;\n output.pos = input.pos;\n output.txc = input.txc;\n return
output;\n};\n", length 190, defines 0x0, include 0x0, function "vsMain",
profile "vs_3_0", flags 0, shader 0x32d464, error_msgs 0x0, constant_table 0x0.
fixme:d3dcompiler:make_assignment Check for casts in the lhs.
fixme:d3dcompiler:make_assignment Check for casts in the lhs.
fixme:hlsl_parser:hlsl_parse Check for valued return on void function.
fixme:hlsl_parser:hlsl_parse Implicit conversion to the return type if needed,
error out if conversion not possible.
err:d3dcompiler:compile_shader HLSL shader parsing failed.
-----
And so on
Is there significant information?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26503
Summary: modal windows don't stay on top
Product: Wine
Version: 1.3.15
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: c_pradelli(a)yahoo.com
Created an attachment (id=33743)
--> (http://bugs.winehq.org/attachment.cgi?id=33743)
Simple delphi program + source.
Under MS Windows these modal windows can be placed anywhere on the screen,
clicking the main window doesn't hide them. Not so under Wine: clicking the
main window puts it on top hiding the modal windows.
Ubuntu 10.04
Wine version 1.3.15
Demo from Khmelevskiy Alexandr is attached.
Open "bug21039.exe" then press "MessageBox" button.
Press main windows.
Messagebox goes behind main window an application hangup.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26303
Summary: Rayman 2 Demo menu item doesn't work until you remove
a backslash
Product: Wine
Version: 1.3.15
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
ftp://ftp.ubisoft.com/Rayman2/rayman2high.zip
(sha1sum 14b2ad6f41e2e1358f3a4a5167d67a7111ea4fb5 )
is a cute little game that works well if you do
winetricks-alpha vd=640x480 dinput
and run it with
wine c:\\UbiSoft\\Rayman2Demo\\Rayman2Demo.exe
but it fails if you use the freedesktop.org icon placed
on the desktop or in the system menus. The icon target is
env WINEPREFIX="$HOME/.local/share/wineprefixes/rayman2_demo" wine
C:\\windows\\UbiSoft\\SetupUbi.exe -play\ Rayman2
That command in a terminal reproduces the error.
Removing the backslash between 'play' and 'Rayman2'
works around the problem, and lets you start the game from the menus.
And commenting out the line
case ' ':
in winemenubuilder.c in escape() also works around the bug.
Are there programs that rely on spaces being escaped in fdo desktop entries?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22692
Summary: Total Commander: When copying a file the progress bar
is not updated except at the end
Product: Wine
Version: 1.1.44
Platform: x86-64
URL: http://www.ghisler.com/amazons3.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: alexandru.balut(a)gmail.com
Press F5 to copy a large file (200MB), notice the progress bar looks empty and
it shows "0 %" all the time; after a while, if you keep staring at it, right at
the end it is updated and looks full.
I guess whatever library is doing the copying does not report back the
progress, except at the end..
Total Commander 7.50a
wine-1.1.44
Ubuntu 10.04 64
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43881
Bug ID: 43881
Summary: GOG LEGO Batman: broken graphics due to shader
compiling failure
Product: Wine
Version: 2.18
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: farmboy0+winehq(a)googlemail.com
Distribution: ---
The shader contains a string declaration like this:
string description = "Ubershader"
This leads to the following output:
trace:d3dcompiler:compile_shader Checking compilation target "vs_3_0"
trace:d3dcompiler:push_scope Pushing a new scope
fixme:hlsl_parser:hlsl_parse Array.
trace:d3dcompiler:compilation_message :144:7: error: syntax error, unexpected
KW_STRING
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53814
Bug ID: 53814
Summary: TMUnlimiter 1.2.0.0 unable to find configuration INI
Product: Wine
Version: 7.19
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: asdfghrbljzmkd(a)outlook.com
Distribution: ---
TrackMania Nations Forever 2.11.26
(https://nadeo-download.cdn.ubi.com/trackmaniaforever/tmnationsforever_setup…)
TMUnlimiter 1.2.0.0
(https://trackmania-unlimiter.software.informer.com/download/)
Running TMUnlimiterConfigurator.exe gives an error message:
---------------------------
Error
---------------------------
Failed to read TMUnlimiter.ini file. Make sure that this file is in the same
directory.
If you have it, try to run application with administrator rights.
---------------------------
OK
---------------------------
Also, when changing settings directly in the INI then starting the game, the
changed settings are not recognized.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35128
Bug ID: 35128
Summary: Air Conflicts (Pacific Carriers/Secret Wars) hangs at
the loading screen
Product: Wine
Version: 1.7.8
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Classification: Unclassified
Created attachment 46858
--> http://bugs.winehq.org/attachment.cgi?id=46858
terminal output
I have this bug with both games from the Air Conflicts series when running
under Wine. The native Linux version of AC:Pacific Carriers (running under the
Linux version of Steam) doesn't have the problem. Also, running the Windows
version in Virtualbox doesn't have the problem.
The problem: the game starts fine and mouse/keyboard work as expected in the
menus, but when I start a mission the game is stuck in the loading screen. The
game is not completely dead because game tips are cycling through on the screen
and the text 'Press any key to continue' is flashing, but the game doesn't
accept mouse or keyboard input any more so I can't get in the game.
The ACPC.exe process is consuming 30-40% cpu, but nothing happens, I have to
kill the process to exit.
Fedora 19
Nvidia binary drivers 325.15
X.Org X Server 1.14.4
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47689
Bug ID: 47689
Summary: When DirectWrite rendering is enabled in Notepad++
performance is inacceptable
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kolan_n(a)mail.ru
Distribution: ---
[Notepad++](https://github.com/notepad-plus-plus/notepad-plus-plus) is an
application based on Scintilla.
Scintilla is a library for creating textareas.
[DirectWrite](https://docs.microsoft.com/en-us/windows/win32/directwrite/dir…
is an API for text rendering with subpixel antialiasing which can be
hardware-accelerated using Direct2D.
[SCI_SETTECHNOLOGY](https://www.scintilla.org/ScintillaDox.html#SCI_SETTECHN…
is a enum value identifying a call to Scintilla (in fact it is done using
Windows messages).
When it is set to values > 0 (SC_TECHNOLOGY_DIRECTWRITE,
SC_TECHNOLOGY_DIRECTWRITERETAIN, or SC_TECHNOLOGY_DIRECTWRITEDC), Scintilla
uses DirectDraw accelerated via Direct2D for rendering instead of an own
surrogate.
In Windows >7 everything works fine.
In Wine performance is damn bad - single screen update takes several seconds.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34883
Bug #: 34883
Summary: Warface gface version does not start
Product: Wine
Version: 1.7.4
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: levanchelidze(a)gmail.com
Classification: Unclassified
Created attachment 46489
--> http://bugs.winehq.org/attachment.cgi?id=46489
Terminal output
I created a 32 bit wine prefix and installed firefox 25 windows version on it
then I installed warface plugin from gface and installed the game without a
problem but when I try to start the game it shows a black screen and then
disables it and just shows the webpage I was on
http://i.imgur.com/3JT0ZUO.png
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32816
Bug #: 32816
Summary: Enemies are not displayed in Chompston
Product: Wine
Version: 1.5.22
Platform: x86-64
URL: http://www.contralogic.com/games/chompston/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vulture6(a)mail.com
Classification: Unclassified
The enemies (which should be translucent) are not displayed, making the game
impossible to play. The console is full of 'fixme:d3d:gl_blend_factor Unhandled
blend factor 0.' messages.
Download from: http://www.contralogic.com/games/chompston/
System: GTS 250 with Nvidia driver version 313.09
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36399
Bug ID: 36399
Summary: Terrible Performance in TERA
Product: Wine
Version: 1.7.18
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: sickam(a)mail.ru
Created attachment 48447
--> http://bugs.winehq.org/attachment.cgi?id=48447
Output of TERA with a play time of about 10 minutes
Hi! As described above TERA performs really bad under wine. This is confirmed
by many players I have talked to about this who played it via Wine before.
My system is a Gentoo x86_64 using an Intel i5-3570k with a Geforce GTX 660 and
I'm playing the EU Version: http://en.tera.gameforge.com/
I already tried a lot of possible solutions i found here, on the forums, on
other forums and across the internet but nothing really helped so far. (For
example: several registry keys, 32 and 64 bit prefix, using native/builtin dx3d
libraries, enabling the virtual window mode in wine, disabling the winedebug
output, ...)
Since none of that helped i want to ask here for help.
If anyone could install it on his machine and help me troubleshooting this i
would really appreciate it. Also if anyone has a dualboot system feel free to
compare the game between wine and native windows.
See attachment for an output log of TERA when i open the Launcher, log in and
play a little bit (about 10 minutes). As you can see it spams a load of
'fixme:d3d:resource_check_usage Unhandled usage flags 0x8.' errors which i
think are the reason for the bad performance which leads to extremely low FPS.
Thanks in advance!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44376
Bug ID: 44376
Summary: Wine gives error massage while installing Battle.net
Product: Wine
Version: 2.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mizobocigame(a)gmail.com
Distribution: ---
Created attachment 60290
--> https://bugs.winehq.org/attachment.cgi?id=60290
wine gives error while installing a file
When I try to install Battle.net-Setup.exe, gives me this error. This error
massage appeared a few weeks ago and I tried a lot of work-arounds but
nothing's changed. In playonlinux the installation goes to the login panel but
there's another error: Battle.net Helper.exe encountered a serious problem.
Thanks for help (sorry for my bad english)
Linux Debian (Buster)
Wine version: 2.0.4-1
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52451
Bug ID: 52451
Summary: Mikrotik Winbox not open in new window
Product: Wine
Version: 7.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sandro(a)ivynet.it
Distribution: ---
Created attachment 71731
--> https://bugs.winehq.org/attachment.cgi?id=71731
Wine7 - Open in new window enabled
Winbox 64Bit 3.32
After updating to Wine7.0 I cannot open any mikrotik device with option "open
in new window" selected
If that option is not selected it work well
With wine 6.0.2 it worked well
in the attachment:
logs with "open in new window" option enabled
logs with "open in new window" option disabled
logs about wine6 with open in "new window enabled"
an app screenshot about whe options
Thanks
Sandro
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44235
Bug ID: 44235
Summary: EasyAntiCheat doesn't run on Wine at all - wine64 !=
win64
Product: Wine
Version: 2.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: shawn.starr(a)rogers.com
Distribution: ---
So, I notice any game that uses EasyAntiCheat tries to download some updated
info
such as:
https://download.eac-cdn.com/api/v1/games/138/client/wine64/download/?uuid=…
Except, EasyAntiCheat ignores Wine's "Hide Wine version from applications" in
staging options.
If I switch the URL to 'win64' it downloads, could we have a way to override
wine64 == win64 checks?
While EasyAntiCheat does acknowledge they can support wine specific data, we
shouldn't be treating this as 'wine64' but win64.
I assume wine 2.20 and wine 3.x builds all have this issue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41942
Bug ID: 41942
Summary: Crash on Space Engine 0.9.8 start.
Product: Wine
Version: 1.9.23
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sergey.rahmanov(a)gmail.com
Distribution: ---
Created attachment 56328
--> https://bugs.winehq.org/attachment.cgi?id=56328
Log file.
Space Engine 0.9.8 crashes on start.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21664
Summary: "fixme"-message on PPLive.exe start
Product: Wine
Version: 1.1.38
Platform: x86
OS/Version: Mac OS X 10.4
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ddietz.post(a)googlemail.com
Created an attachment (id=26160)
--> (http://bugs.winehq.org/attachment.cgi?id=26160)
"fixme"-message on PPLive start
Hello, i installed latest version of wine with latest version of macports.
I try to start latest version of PPLive
Version:
PPLive 2.4.2.0013
Released Date:
2010.02.06
S. Attachment
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51034
Bug ID: 51034
Summary: When downloading a large file in KakaoTalk, the
message 'Download failed' shows.
Product: Wine
Version: 6.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: shlee1503(a)naver.com
Distribution: ---
I have a similar problem with this.
-
https://superuser.com/questions/597818/wine-running-apps-stops-download-whe…
- https://bugs.winehq.org/show_bug.cgi?id=42677
Can't download 'KakaoTalk' software updates.
=======================
* Step to reproduce
1. Download the KakaoTalk (except the latest version)
(old version: https://www.filehorse.com/download-kakaotalk-for-windows/60750/)
(latest version: https://app-pc.kakaocdn.net/talk/win32/KakaoTalk_Setup.exe)
2. Install KakaoTalk.
3. Launch KakaoTalk and click the Settings button at the top right.
4. Click the Update button.
* Actual Results
The user gets a message stating that 'error has occurred'.
* Excepted Results
No errors occur and the update downloads.
* Reproduction Rate
10/10
* Environment
wine-6.6
* Logs
no logs. (゚Д゚)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39262
Bug ID: 39262
Summary: Unhandled exception running DiscordSetup.exe
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: joel.s.barnes(a)gmail.com
Distribution: ---
Created attachment 52334
--> https://bugs.winehq.org/attachment.cgi?id=52334
first file is the 32-bit install, 2nd is the 64-bit install; also the installer
Unhandled exception attempting to begin installation of DiscordSetup.exe.
Installing using PoL, first tried to install to existing virtual drive, 32-bit
Windows. Next tried to install to new 64-bit virtual drive. Same error in both
cases.
https://discordapp.com
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35306
Bug ID: 35306
Summary: Kirikiri2(Novel game engine) Authentication failed
with 64bit wine
Product: Wine
Version: 1.7.9
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hibi.sasahara(a)gmail.com
Classification: Unclassified
This failure to Oni Gokko! Fan disk(鬼ごっこ! ファンディスク)
(This error happens well many games of use "Kiri Kiri"(吉里吉里) Novel Game
Engine.)
Play start startup.exe menu click "実行"(game start) button or direct launch .exe
file.
Upon dialog.
Dialog title is: "吉里吉里"
Dialog text is: "Authentication failed : unrecognized kernel32 module. / NM."
I cannot meet start menu.
note:
AppDB is
http://appdb.winehq.org/objectManager.php?sClass=version&iId=29461
This game is Fan Disk. No have trial version.
But have trial version of the main story.
The same malfunction occurs.
Trial version toKernel32.dll
http://mirror.tsundere.ne.jp/download/alcot/a4c0d67b6bfd6851f59a5607b5abac6…
sha1sum
fe61016df22f4a8e0d288fe6954d8bdbcf3c6d60
In Windows8 64bit(Consumer Preview), same malfunction occurs.
Causes and remedies dll file(Win8WOH.zip) to
http://resemblances.click3.org/?p=1406
Summary of this cured dll.
This application anthentication check to "kernel32.dll".
Return path from "GetModuleFileNameA" API.
Windows7 64bit is "%windir%SysWOW64", but Windows8 64bit is "%windir%System32".
This application demanding answer is "%windir%SysWOW64", anthentication check
not success.
Have other error after this dll used WINE dll override.
(In Windows7 64bit and in Ubuntu12.04 i386 environments no appear this dialog.)
Dialog title is: "吉里吉里"
Dialog text is: "Authentication failed : Invalid Signature token or
unrecognized kirikiri core. / TS."
This is other failure.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54672
Bug ID: 54672
Summary: mfplat cannot export to MPEG4 video
Product: Wine
Version: 8.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mfplat
Assignee: wine-bugs(a)winehq.org
Reporter: bozkar(a)gmail.com
Distribution: ---
Radiant DICOM Viewer still cannot export video to mp4 under wine.
MFCreateSinkWriterFromURL() is already implemented. (
https://bugs.winehq.org/show_bug.cgi?id=45862 is fixed)
Although MPEG4 codec(?) (GUID: dc6cd05d-b9d0-40ef-bd35-fa622c1ab28a ) has not
been implemented properly yet.
0370:trace:mfplat:MFStartup 0x20070, 0.
0370:trace:mfplat:MFCreateSinkWriterFromURL
L"C:\\users\\boskar\\Documents\\MOVIE-0001.mp4", 0000000000000000,
0000000000000000, 000000000B0DEF28.
0370:warn:mfplat:sink_writer_get_sink_factory_class Couldn't find factory class
for container {dc6cd05d-b9d0-40ef-bd35-fa622c1ab28a}.
0370:trace:mfplat:MFShutdown
Tested under 8.3-staging.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46010
Bug ID: 46010
Summary: [DX11] ARMA 3 for Windows crashes at startup without
error messages
Product: Wine
Version: 3.18
Hardware: x86
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: svyatpro(a)gmail.com
When running ARMA III for Windows with WineD3D the game crashes at startup.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46534
Bug ID: 46534
Summary: Just Cause 4 crashes on startup
Product: Wine
Version: 4.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ramy0zahran(a)gmail.com
Distribution: ---
Created attachment 63387
--> https://bugs.winehq.org/attachment.cgi?id=63387
JC4backtrace
Unhandled exception: page fault on read access to 0xffffffffffffffff in 64-bit
code (0x0000000141926167).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45862
Bug ID: 45862
Summary: [Overwatch] Saving highlights fails.
Product: Wine
Version: 3.16
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hewanci(a)gmail.com
Distribution: ---
I used to be able to save highlights perfectly, until a few months ago a bug
appeared that caused OW to crash or freeze during rendering.
This bug is supposedly fixed, see: bug 45622
However while it doesn't crash, it fails to save now, before it even starts
rendering it.
I wasn't sure if I should re-open that bug, as the fix is partial, or file a
new, but I guess it doesn't crash anymore so I filed a new.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53613
Bug ID: 53613
Summary: Visual novel RE:D Cherish! logo video and opening
movie does not play
Product: Wine
Version: 7.15
Hardware: x86-64
URL: http://crystalia.amusecraft.com/red/download.html#Tria
l
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: myatmin7800(a)gmail.com
Distribution: ---
Created attachment 73010
--> https://bugs.winehq.org/attachment.cgi?id=73010
Application log using wine-devel 7.15
At wine-devel 7.15
You can download trial game at the game's offical website.
http://crystalia.amusecraft.com/red/download.html#Trial
Run it with LANG=ja_JP.UTF8 wine red_cherish_try.exe. Logo movie does not play
after starting the game. You can only hear the sound with a white screen.
Download save file from here
https://drive.google.com/drive/folders/17dWKzRiuPasS34ea-vkjpQQFFlk6eIzy?us…
to get quick access to opening movie. Place save folder in the game directory.
After the 2,3 clicks, opening movie fails to play.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52352
Bug ID: 52352
Summary: Impossible completing the installation of YI Home
Product: Wine
Version: 6.0.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: s.magrini(a)tiscali.it
Distribution: ---
Created attachment 71528
--> https://bugs.winehq.org/attachment.cgi?id=71528
Error log
After launching the installation by means of the command:
wine YIHomePCClientIntl_download_1.0.0.2.exe
the installation starts correctly but, after asking some questions, it stops
with the attached log.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53635
Bug ID: 53635
Summary: not implemented dll
Product: Wine
Version: 7.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rafalohaki(a)gmail.com
Distribution: ---
Created attachment 73033
--> https://bugs.winehq.org/attachment.cgi?id=73033
backtrace
not implemented
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54155
Bug ID: 54155
Summary: wxwork failed to launch
Product: Wine
Version: 8.0-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: ayafcc(a)163.com
Distribution: ---
Created attachment 73682
--> https://bugs.winehq.org/attachment.cgi?id=73682
log
1、download the application from attachment
2、install it to any path
3、execute command: wine path/WXWork.exe
it shows:0024:err:sync:RtlReleaseSRWLockExclusive Lock 0F4BD460 is not owned
exclusive!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48085
Bug ID: 48085
Summary: Wine error trying to install Mono after a version
update
Product: Wine
Version: 4.19
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ronen.rozner(a)gmail.com
Distribution: ---
Created attachment 65637
--> https://bugs.winehq.org/attachment.cgi?id=65637
Backtrace file
It started after an update a few versions ago (4.xx branch, currently running
4.19).
When launching an application, wineconfig will initially run, prompting to
update Mono. Then it will prompt an error (see trace).
The Win application runs normally, so I guess it might not be a severe bug.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40613
Bug ID: 40613
Summary: WhatsApp Desktop application not working
Product: Wine
Version: 1.9.9
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: sh.yaron(a)gmail.com
Distribution: ---
Created attachment 54470
--> https://bugs.winehq.org/attachment.cgi?id=54470
Stack trace as appears on cli
WhatsApp for Windows Desktop was released and I tried to install it.
Apparently it requires Windows 8 and greater, I've set it correctly in Winecfg.
Trying to run the WhatsApp installation (ver 0.2.684) renders the error in the
attached file.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29523
Bug #: 29523
Summary: CDBurnerXP hangs on right-clicking empty space in the
file browser
Product: Wine
Version: 1.3.36
Platform: x86-64
URL: http://cdburnerxp.se/download?more-options
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Classification: Unclassified
Created attachment 38233
--> http://bugs.winehq.org/attachment.cgi?id=38233
Terminal output
Right-clicking in an empty section of the file browser causes CDBurnerXP to
become unresponsive. On Windows, this brings up a context menu.
Steps to reproduce:
1. winetricks dotnet20
2. Install and run CDBurnerXP
3. Choose "data disc" from the main menu
4. Right-click in some empty space within the file browser (top-right section)
The problem is also present in 1.2.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52401
Bug ID: 52401
Summary: Improper synchronization in sock_recv/sock_send leads
to arbitrary reordering of completion of I/O requests
Product: Wine
Version: 7.0-rc6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: jinoh.kang.kr(a)gmail.com
Distribution: ---
The sock_recv function (dlls/ntdll/unix/socket.c) issues a 'recv_socket' call
to
the server to complete the I/O request.
Prior to calling the server, the function attempts to serve the I/O request
locally first by calling try_recv().
The consequence is that there are two types of asynchronous I/O request
(hereinafter "Async") sent to the server:
1. Eager: try_recv() call has succeeded before 'recv_socket'. There is no more
I/O to be done.
2. Deferred: the request is still pending. When the server senses an incoming
packet, async_recv_proc() (in client side) will be called to complete the
I/O.
The problem is that eager Asyncs are _not_ prioritized before deferred Asyncs.
Therefore, deferred Asyncs may be completed before eagar Asyncs.
The following scenario illustrates the problem:
1. The socket's incoming buffer is initially empty.
2. Client: The application calls WSARecv(). In sock_recv(), try_recv() fails
with STATUS_DEVICE_NOT_READY; therefore, a deferred Async is queued to the
server. WSARecv() returns with error ERROR_IO_PENDING.
3. The socket receives packet [A] in the meantime. The socket's incoming buffer
is no longer empty.
4. Client: The application calls WSARecv() again. In sock_recv(), try_recv()
succeeds with packet [A]; therefore, an eager Async is queued to the
server.
5. The socket receives packet [B] in the meantime.
6. Server: the poll() loop detects this, and calls async_wake_up(
&sock->read_q,
status ). This causes APC_ASYNC_IO for deferred Async to be called to the
client process.
6. Client: While still in the second sock_recv(), the client does wait_async()
on the returned wait handle. This causes the APC_ASYNC_IO (a system APC)
to be dequeued.
7. Client (select loop): The client does a server select call. This returns
STATUS_KERNEL_APC with APC_ASYNC_IO. The client calls try_recv() (from
async_recv_proc), which succeeds with packet [B]. The client process
completes the deferred Async with this packet.
8. Client (select loop): The client re-issues the select call after the APC.
8. Server: the wait on the async wait handle is satisfied, causing
async_satisified() to be called. This in turn calls async_set_result(),
which completes the eager Async (with packet [A]).
9. Client: The client exits sock_recv() and in turn WSARecv(), which reports
immediate success.
(Ditto for sock_send and other similar asynchronous I/O requests.)
If the application uses a completion port, it will observe the deferred Async
first, and the eager Async second. The deferred Async carries packet [B],
while the eager Async carriers packet [A]. This results in the application
receiving the packets in the wrong order.
--
Three possible solutions comes to mind:
1. Replace the call to try_recv()/try_send() in sock_recv()/sock_send() with
STATUS_DEVICE_NOT_READY. This may slightly reduce performance, since it
always defers all I/O requests and forces them to go through the poll()
loop.
2. Make async_handoff() immediately call async_set_result() if the status and
data are already set (i.e. the I/O has completed synchronously). Since this
affects other asynchronous operations as well, I'm not sure this approach
is semantically correct.
3. Prioritize immediately satiable async wait handles _before_ system APCs when
waiting for objects. This approach too changes semantics, and appears much
uglier than other solutions.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36547
Bug ID: 36547
Summary: 3DMark 2003 installer has no taskbar/Alt Tab
representation
Product: Wine
Version: 1.7.19
Hardware: x86
URL: http://www.futuremark.com/benchmarks/legacy
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P1
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: t.artem(a)mailcity.com
Created attachment 48641
--> http://bugs.winehq.org/attachment.cgi?id=48641
Installing 3DMark03_v360_1901.exe
Download and try to run 3DMark03_v360_1901.exe.
3DMark03 installer won't be registered in the Alt-Tab list, or taskbar.
See the attached screenshot.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49299
Bug ID: 49299
Summary: PowerToys for Windows 10 crashes on unimplemented
function KERNEL32.dll.GetPackageFamilyName
Product: Wine
Version: 5.9
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: alexhenrie24(a)gmail.com
Distribution: ---
The program installs, but crashes when you try to run PowerToys.exe.
$ sha256sum PowerToysSetup-0.18.1-x64.msi
83b2f088f6a0ef7066ba8303ad51e2a270123fe127991486b715ac55f84da19b
PowerToysSetup-0.18.1-x64.msi
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39669
Bug ID: 39669
Summary: D3DERR_NOTAVAILABLE in Dishonored - Steam
Product: Wine
Version: 1.8-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: miachm3(a)gmail.com
Distribution: ---
Dishonored crashes at start with Steam Launcher:
1º Install Steam.
2º Install Dishonored from Steam.
3º Launch, not additional options required.
Anothers D3X9 games works as well.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52832
Bug ID: 52832
Summary: Regression: Crysis 3 crashes at startup
Product: Wine
Version: 7.4
Hardware: x86-64
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: svyatpro(a)gmail.com
Crysis 3 and other heavy D3D applications crashes at startup on Windows 32bit
after this commit:
https://github.com/wine-mirror/wine/commit/24432a24d5e922cbd824b0af8f7b0c66…
Works before this commit without issues.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15153
Summary: Dragging tabs crashes Code:Blocks 8.02 C++ IDE
Product: Wine
Version: 1.1.4
Platform: Other
URL: http://sourceforge.net/project/downloading.php?groupname
=codeblocks&filename=codeblocks-8.02mingw-
setup.exe&use_mirror=dfn
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: florianskarten(a)web.de
Created an attachment (id=15880)
--> (http://bugs.winehq.org/attachment.cgi?id=15880)
complete crash log (contains backtrace)
At the bottom of the IDE is a panel Logs & others, it contains several tabs. If
you start dragging one of these tabs then the wine crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37452
Bug ID: 37452
Summary: python 3.1.1: test_urllib2net failed
Product: Wine
Version: 1.7.28
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: litimetal(a)gmail.com
Distribution: ---
Created attachment 49822
--> https://bugs.winehq.org/attachment.cgi?id=49822
terminal output.txt
0. Download python from
https://www.python.org/ftp/python/3.1.1/python-3.1.1.msi
sha1sum python-3.1.1.msi
dcf93cb7d5432aa6e47479351f3cbeefddb0bd62 python-3.1.1.msi
1. Install it
2. wine python.exe -m test.test_urllib2net
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38583
Bug ID: 38583
Summary: Legions Overdrive: In-game textures black
Product: Wine
Version: 1.7.42
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: gaming4jc2(a)yahoo.com
Distribution: ---
Created attachment 51481
--> https://bugs.winehq.org/attachment.cgi?id=51481
D3D fixmes
Since the entire world is black excepting the sky and some text, it is still
not possible to play this in native wine without DLL overrides. I am attaching
a bug report showing various D3D fixmes needed.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54872
Bug ID: 54872
Summary: UAV buffers are not implemented in vkd3d-compiler for
sm 5
Product: vkd3d
Version: 1.7
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: hlsl
Assignee: wine-bugs(a)winehq.org
Reporter: winehq(a)sub.monoid.al
Distribution: ---
Trying to compile a HLSL shader with vkd3d-compiler with any shader model fails
if the shader uses a UAV buffer type (RWBuffer, RWStructuredBuffer,
RWByteAddressBuffer).
These types aren't in the parser, so things fail with something like
`vkd3d-shader-cs-0.hlsl:1:1: E5000: syntax error, unexpected NEW_IDENTIFIER`
Pointing to one of the type names listed above.
An example shader is
```
RWStructuredBuffer<float> foo : register(u0);
[numthreads(1, 1, 1)] void main() {}
```
From the source, it seems like the only UAV types are RWTextures, and there are
codepaths in the compiler which assume that, for example the valid states of
`hlsl_type::sampler_dim`.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21108
Summary: Comanche 3 Gold Demo crashes
Product: Wine
Version: 1.1.35
Platform: x86-64
URL: http://download.cnet.com/Comanche-Gold-demo/3000-7551_
4-10019306.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: c_korn(a)gmx.de
Created an attachment (id=25351)
--> (http://bugs.winehq.org/attachment.cgi?id=25351)
wine-1.1.35 output
The Comanche 3 Gold Demo crashes when started.
After the crash occurs there is a window with an error message.
It looks for a file C:\D.MIS. The game is installed in C:\Demo\.
If it is installed in C:\APPS\ then the error message says that it looks for a
file C:\A.MIS.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53428
Bug ID: 53428
Summary: 18ae96e5fb causes deadlocking on nvidia hardware
Product: Wine
Version: 7.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: d3d
Assignee: wine-bugs(a)winehq.org
Reporter: hibbsncc1701(a)gmail.com
Distribution: ---
This bug is split from Bug #53372. Testing in that bug (See Zeb's comment:
https://bugs.winehq.org/show_bug.cgi?id=53372#c9) reveals that commit
18ae96e5fb3cbbd53f1a022ba81203de6b431228 causes deadlocking to occur in some
programs on Nvidia hardware.
Reverting the patch does fix it, but obviously that is not ideal. As per Zeb's
request I've created this bug.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49667
Bug ID: 49667
Summary: user32-rawinput-mouse: can't use other programs
normally while running Elite Dangerous
Product: Wine-staging
Version: 5.14
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kolAflash(a)kolahilft.de
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
This is mouse bug is analogous to this keyboard bug:
https://bugs.winehq.org/show_bug.cgi?id=48419
When user32-rawinput-mouse is being used, it's problematic to click onto other
X11 windows while a "Elite Dangerous" is running.
In detail:
1. configure "virtual desktop" mode via winecfg
2. Start EliteDangerous in Wine
3. Open a view inside EliteDangerous where every mouseclick (independent of
cursor position) will have an effect (e.g. cockpit mode -> mouse-1 fires
weapon)
4. switch to another X11 window (e.g. Firefox)
5. click onto something
When clicking in Firefox, the click also get send into the game. So e.g. the
primary weapon gets fired in the game.
Alternatively, the cursor can also positioned over an ingame button (e.g. in
the main menu). Then get another window into foreground without moving the
mouse (e.g. alt-tab) and then click. This will trigger the ingame button over
which the cursor lasted before switching windows.
Workaround:
./patches/patchinstall.sh DESTDIR=../wine-5.14 --all -W user32-rawinput-mouse
-W user32-rawinput-mouse-experimental -W user32-rawinput-hid
(user32-rawinput-mouse-experimental and user32-rawinput-hid depend on
user32-rawinput-mouse)
For more details, please see:
https://bugs.winehq.org/show_bug.cgi?id=48419#c5
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44613
Bug ID: 44613
Summary: Stronghold 2 Deluxe fails to compile shaders on
startup with builtin d2dx9_27.dll
Product: Wine
Version: 2.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: alexander-winehq(a)xmine128.tk
Distribution: ---
Created attachment 60601
--> https://bugs.winehq.org/attachment.cgi?id=60601
WINE console output
Summary
=======
Stronghold 2 works perfectly when placing a native d3dx9_27.dll in
$WINEPREFIX/dosdevices/c:/windows/syswow64
or by running `winetricks d3dx9_27` (the override done by winetricks is not
needed).
However when starting the game without the library present it will show many
dialog box with shader compilation errors, before crashing (see attachment 2
for a selection).
A few examples:
* Error: Unable to open include file ../PhongShader.fx
Warning: Unmatched #if/#endif at end of file
Error: Unexpected end of file during preprocessing
Error: syntax error
* Error: Unable to open include file ../PhongShader.fx
* Error: Unable to open include file ../LifeStudioHeadLighting.fx
Error: Unable to open include file ../TransformState.fx
Finally the error message “Failed to load shared effects parameter file.
Rendering may appear incorrect.” is displayed and the game segfaults.
Meanwhile a bunch of fixmes will be logged to the console (see attachement 1).
Steps to reproduce
==================
Full game
---------
1. Install Stronghold 2 v1.0 German from ISO-image of the retail CDs
2. Download and install the [v1.4 “Deluxe”
patch](http://www.4players.de/4players.php/download_info/Downloads/Download/46369/Stronghold_2/Patch_14.html)
3. Apply NoCD crack if you don't actually have a CD drive (like me)
4. Start game
The Stronghold 2 Demo is not affected unfortunately.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45780
Bug ID: 45780
Summary: Zeplin installer does not start
Product: Wine
Version: 3.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rpeccolo(a)pratura.io
Distribution: ---
Created attachment 62236
--> https://bugs.winehq.org/attachment.cgi?id=62236
console output when trying to install zeplin
doing wine zeplin-installer does not work
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24812
Summary: Explorer++: right-click menu (in the main listview)
degrades to nothing when opened multiple times
Product: Wine
Version: 1.3.5
Platform: x86-64
URL: http://www.explorerplusplus.com/download
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=31378)
--> (http://bugs.winehq.org/attachment.cgi?id=31378)
Terminal output with a crash
A few locations seem to be exempt from this bug (like My Computer), but it can
be seen in the root of the Z:\ drive. Right-clicking in an empty area of the
main listview gives a basically-correct menu the first time (compared to
Windows, the only difference is the lack of a "new" submenu).
However, right-clicking in the blank area again produces a menu with fewer
items - the topmost two items have disappeared. Each subsequent right click
removes two more items (including separators) from the top of the menu until
they all disappear and the menu doesn't pop up anymore. Occasionally, the app
will crash when trying to exit or switch to another folder afterward.
Native comctl32 doesn't help.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52213
Bug ID: 52213
Summary: Tests for mfreadwrite crash after pthread_exit
Product: Wine
Version: 7.0-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gmascellani(a)codeweavers.com
Regression SHA1: 4ba31162c37ea237763e650f6242535d86ffb170
Distribution: Debian
Since commit 4ba31162c37ea237763e650f6242535d86ffb170 test for mfreadwrite
crash in a funny way on my system: one of the threads of the tests crashes
after calling pthread_exit, which is, as far as I understand, the last place in
which we have the control of a dying thread.
The system on which I am trying this is a rather recently installed Debian
unstable amd64, for which I did not do any specific tinkering, say, of the
dynamic loader, glibc or anything else. So I can't think of anything unusual
that could trigger this on my system. However, my first impression is that
somehow we corrupt something in the pthread or glibc status so that the
teardown goes badly.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34322
Bug #: 34322
Summary: Total Commander: cut works like copy
Product: Wine
Version: 1.7.0
Platform: x86
URL: http://www.ghisler.com/amazons3.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
To reproduce: right-click a file and wait for the context menu to show up;
select Cut. Start wine explorer (Paste is not available in TC at the moment -
bug 34319), right-click on folder background and select Paste (pick a regular
folder - paste on desktop doesn't work). The file is copied instead of being
moved.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34319
Bug #: 34319
Summary: Total Commander: context menu does not contain Paste
Product: Wine
Version: 1.7.0
Platform: x86
URL: http://www.ghisler.com/amazons3.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
Right-click on a folder and hold the button until menu pops up. The menu should
contain "Paste" command (at least when clipboard contains a file), but does
not. Same goes to clicking on folder view background.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11629
Summary: Usable Wine interface
Product: Wine
Version: unspecified
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: remco47(a)yahoo.com
What about making a Wine GUI to behave more like emulators like VirtualBox.
It's extremely hard right now to get Wine in desktop mode. It would be nice if
you could start Wine as an application, which opens up a window like this:
http://xs224.xs.to/xs224/08081/mockup918.png (ignore the virtualbox-stuff)
And if you start one of those prefixes, it by default opens a Wine Desktop with
a simple Taskbar & Start-menu. Somewhere in the Start-menu could be the option
to switch to desktop integration mode. There could also be an option to run the
Wine Desktop full-screen. Like this:
http://xs224.xs.to/xs224/08081/winedesktop771.png (forgive my GIMP skills)
I believe this would be very good for usability. Desktop mode is more stable
than seamless mode, yet it's hidden in winecfg. This kind of UI also exposes
the prefix-functionality in a transparent way. Wouldn't that be a nice 1.0
polishing idea?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34321
Bug #: 34321
Summary: Total Commander: cut/copy/paste keyboard shortcuts
don't work
Product: Wine
Version: 1.7.0
Platform: x86
URL: http://www.ghisler.com/amazons3.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
To reproduce: select a file and press ctrl + x, ctrl+c, ctrl + v. All you get
is:
fixme:shell:ItemMenu_InvokeCommand Unhandled string verb "cut"
fixme:shell:ItemMenu_InvokeCommand Unhandled string verb "copy"
fixme:shell:ItemMenu_InvokeCommand Unhandled string verb "paste"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48344
Bug ID: 48344
Summary: Luminance HDR / qtpfsgui 2.6.0: Empty file select
dialog
Product: Wine
Version: 5.0-rc2
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
$ wine --version
wine-5.0-rc2
$ openssl sha256 Luminance-HDR_v.2.6.0_Windows_64.zip
SHA256(Luminance-HDR_v.2.6.0_Windows_64.zip)=
a29a973adbb71ecb3396df9b8241c480ad8a691534017ba70b3699aff59b83f1
Steps to reproduce:
1. Start Luminance HDR
2. Click the "New HDR image" button.
3. In the "HDR Creation Wizard", click the Plus button.
Results:
Empty file select dialog.
Expected:
File Select dialog should allow file selection.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44797
Bug ID: 44797
Summary: Visio 2003 does not read the complete list of fonts
present in the system.
Product: Wine
Version: 3.4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: christianuceda(a)yahoo.com
Distribution: ---
Created attachment 60831
--> https://bugs.winehq.org/attachment.cgi?id=60831
Screenshot showing the problem.
Visio 2003 does not read the complete list of fonts present in the system.
This leads to drawings losing their fonts and forces unwanted changes in the
drawing.
There is a screen shot to showcase the problem.
I will try to run a regression test in a day or two.
This is running Wine GIT on Ubuntu 16.04.4 with Kernel 4.15.12
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33750
Bug #: 33750
Summary: 360 YunPan: Next Button Unavaliable
Product: Wine
Version: 1.5.31
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: litimetal(a)gmail.com
Classification: Unclassified
Created attachment 44689
--> http://bugs.winehq.org/attachment.cgi?id=44689
screenshot_linux.png
360 YunPan is a file storing & sharing software
0. download the 360 yunpan
1. wine 360yunpan_setup.exe
The installation finished successfully.
2.
cd wine/drive_c/Program Files/360/360YunPan/360cloud/
wine 360Cloud.exe
3. type username & password, and I should choose the working dictionary
4. I can't find the Next button(In Chinese, “下一步”)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47583
Bug ID: 47583
Summary: Tower of the Sorcerer: Item text does not show up
Product: Wine
Version: 4.13
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kingoipo(a)gmail.com
Distribution: ---
Created attachment 64988
--> https://bugs.winehq.org/attachment.cgi?id=64988
TSW on Wine - shows missing text
When running Tower of the Sorcerer v1.2, the text in the left and right side of
the game doesn't show (see screenshot). Text in text messages does show.
Download link of application:
www.vector.co.jp/download/file/win95/game/fh146559.html (click the green button
and you'll get the English version of the game)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43618
Bug ID: 43618
Summary: Sonic CD crashes after failing to compile a shader
Product: Wine
Version: 2.15
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: alexhenrie24(a)gmail.com
Distribution: ---
Created attachment 59037
--> https://bugs.winehq.org/attachment.cgi?id=59037
log with +d3dcompiler
Sonic CD, a Steam game, crashes on startup. I'm attaching a log with
WINEDEBUG=+d3dcompiler.
The game works fine after running `winetricks dlls d3dcompiler_43`.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41249
Bug ID: 41249
Summary: Serato DJ 1.9.2 : Gray Screen with cursor
Product: Wine
Version: 1.9.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: machst(a)live.ca
Distribution: ---
After installing Serato DJ 1.9.2, with vcrun2013 from winetricks and changing
config settings to Windows 7,
Serato DJ opens to a Gray with a your mouse. Can't do anything, must Alt-Tab to
exit and the force kill from task manager.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22413
Summary: Cursor flickers/is sluggish
Product: Wine
Version: 1.1.31
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: simulcra(a)uchicago.edu
CC: simulcra(a)uchicago.edu
Outside of the main menu in Icewind Dale II, the mouse cursor flickers very
heavily and sometimes is very sluggish. This is definitely a regression - am
in the process of doing some git bisects.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47072
Bug ID: 47072
Summary: Canon DPP 4.10.20 install require Administrator
Privileges
Product: Wine
Version: 4.6
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ronen.rozner(a)gmail.com
Distribution: ---
Trying to install Canon Digital Photo Professional 4.10.20 for Windows,
installed msxml3 and dotnet45. Installation starts but require Administrator
Privileges.
The application can be downloaded from my Gdrive with this link (no account
needed), because you will need a valid product serial# to download it from
Canon's site :
https://drive.google.com/file/d/1pyzI3iCbTEHVPye53YvGtptjyF7YVVIQ/view?usp=…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47851
Bug ID: 47851
Summary: AutoCAD 2000 properties window is not clickable
Product: Wine
Version: 4.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: christianuceda(a)yahoo.com
Distribution: ---
The venerable AutoCAD 2000 works almost perfectly in recent Wine except for a
single issue, the properties window/panel can't be clicked on.
The preferences panel works if one clicks on it and then uses the cursor keys
to hi-light the options and then the mouse works and you can click on what you
need.
It is a bit of a shame as the program is 100% usable and works like a dream in
Wine.
(Funnily enough it is impossible to run it on a modern Windows version)
I can share a bottle with a running trial of the software if someone could have
a look at this issue.
Regards.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54146
Bug ID: 54146
Summary: Super Meat Boy: Periodic Music Corruption
Product: Wine
Version: 8.0-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: xaudio2
Assignee: wine-bugs(a)winehq.org
Reporter: sterophonick(a)gmail.com
Distribution: ---
Created attachment 73680
--> https://bugs.winehq.org/attachment.cgi?id=73680
Wine Log
In Super Meat Boy (v1.2.5 tested here), the background music will become
severely corrupted periodically. It happens on inconsistent intervals and will
last for an inconsistent amount of time, usually five or six seconds. This is
worked around by installing xact in Winetricks.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54779
Bug ID: 54779
Summary: Wine does not detect audio output device changes until
after restarting the application on Mac OS X
Product: Wine
Version: 8.4
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
I'm using Wine on Mac OS X 10.15.7 (19H2026). Whenever I connect my bluetooth
headphones to my Mac and set them as output device, Wine applications will not
detect the change until after restarting the application. Every other Mac
application will detect the change as soon as its made.
If you need anything else, feel free to tell me.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43693
Bug ID: 43693
Summary: Photoshop CS6, clicking on mini-bridge thumbnail
crashes bridge with backtrace (JPG files only)
Product: Wine
Version: 2.16
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: christianuceda(a)yahoo.com
Distribution: ---
Created attachment 59150
--> https://bugs.winehq.org/attachment.cgi?id=59150
Backtrace of the crash
When clicking on mini bridge's thumbnails bridge.exe crashes, but only does so
with JPG files.
How to reproduce:
Start Photoshop CS6, go to File->Browse in mini bridge.
Then click on "Launch Bridge"
Select a folder where you have pictures in several formats, for example PNG's
and JPGs.
Double click on the PNG files to open them in photoshop.
Repeat the operation with any JPG file and bridge will crash.
I am Running Wine 2.16 under Ubuntu 16.04.3
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43245
Bug ID: 43245
Summary: Secret World Legends - Installer fails
Product: Wine
Version: 2.10
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 58553
--> https://bugs.winehq.org/attachment.cgi?id=58553
Console output wine 2.10 (non-staging)
Hello everyone,
Secret World has been released as free to play today and I did a brief test on
wine 2.10. Unfortunately the installation fails and I can submit a crash report
to Funcom. Console output is attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54233
Bug ID: 54233
Summary: Harry Potter and the Chamber of Secrets: launcher
doesn't display properly, can't launch the game
Product: Wine
Version: 8.0-rc2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: info(a)fdossena.com
Distribution: ---
Created attachment 73779
--> https://bugs.winehq.org/attachment.cgi?id=73779
HP2 launcher showing the bug
The 2002 UE1 game Harry Potter and the Chamber of Secrets has a launcher from
where you can configure the game, launch a new game or load a saved game.
From my testing, this happens in all versions of Wine: stable, development,
staging, proton and I even tried some older stable builds.
The launcher doesn't work properly in Wine making it impossible to launch the
game. I tracked down the cause to the game's attempt to center the launcher
window which somehow ends up moving the contents of the window instead of the
window itself.
The call to SetWindowPos seems to be done correctly and the calculations are
also correct. I wasn't able to find the bug in Wine itself, but I was able to
find a workaround by modifying the game exe and simply removing the offending
code.
I wrote an article explaining what I did in detail, maybe someone more
experienced in the inner workings of Wine can help:
https://fdossena.com/?p=hp2wine/i.md
I've attached screenshots of how the launcher looks when launched normally in
Wine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39086
Bug ID: 39086
Summary: Fireworks CS6: any action needing a mouse drag won't
work
Product: Wine
Version: 1.7.49
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: lox(a)knc.nc
Distribution: ---
Created attachment 52077
--> https://bugs.winehq.org/attachment.cgi?id=52077
Program Logs
Fireworks CS6 installs properly along the Creative Suite 6.
About everything seems to work properly except anything that needs dragging:
moving an element, drawing etc.
Moving an elements with the arrow keys, or adding a text element with a single
click works properly though.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54692
Bug ID: 54692
Summary: Many DX11 applications crashes after applying
wined3d-bindless-texture patch
Product: Wine-staging
Version: 8.3
Hardware: x86-64
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: svyatpro(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Created attachment 74202
--> https://bugs.winehq.org/attachment.cgi?id=74202
Assassin's Creed Black Flag LOG
Crysis 3, Assassin's Creed Black Flag, 3DMark11 etc crashes at startup when I
apply
wined3d-bindless-texture/0001-wined3d-Use-bindless-textures-for-GLSL-shaders.patch
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20190
Summary: HOMMV Map Editor pane shrinks on every refresh
(Unhandled query type 4)
Product: Wine
Version: 1.1.30
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: myk002(a)yahoo.com
Heroes of Might and Magic V Map Editor is unusable due to the rendered editing
pane continually refreshing at smaller and smaller sizes until it disappears.
The editor shown in the picture attachments is the one for Tribes of the East,
but all three map editors (original, Hammers of Fate) behave similarly.
It is also notable that the map editor application takes an inordinately long
time to appear, and uses 100% of the CPU until it does. Once it does finally
appear, menus are navigatable, and the application appears to function normally
other than the constant refreshing of the editing pane. Every time the editor
pane refreshes (and shrinks), the following warning message appears on the
console:
fixme:d3d:IWineD3DDeviceImpl_CreateQuery (0x1a06c0) Unhandled query type 4
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53903
Bug ID: 53903
Summary: LoggerPro3 video analysis does not work
Product: Wine
Version: 7.20
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tuomas.nurmi(a)opinsys.fi
Distribution: ---
Created attachment 73446
--> https://bugs.winehq.org/attachment.cgi?id=73446
Log of trying to insert video in LoggerPro Demo, Wine 7.20,
WINEDEBUG=warn+all,mfplat
When trying to use LoggerPro3 video analysis tool under Wine, instead of a
in-app widget playing the selected video, an error is produced.
Tested on Debian 11 Bullseye (equivalent). I've monitored that there's lately
been changes in Wine that probably affect this functionality, and I've assessed
from my various test logs that the movie analysis tool seems to have been
getting closer to functioning thanks to them. However, it still doesn't with a
today's git checkout, so I'll document my test results here.
The non-functionality is reproducible with the freely downloadable 30 day demo
version of LoggerPro, which is available at
https://www.vernier.com/download-logger-pro-demo-win , however the resulting
error of demo and full version seem to slightly differ here.
The tool can be invoked with: Main window menubar -> Insert -> Movie -> select
a video file (demo videos available at ../../Language independent/Movies)
After installing all the gstreamer packages I could think of, the final error
message I've gotten with the demo version is as follows:
Movie Load Error
Error code: 0xc00d36b3
Log of this, run with WINEDEBUG=warn+all,mfplat on Wine 7.20, is attached.
I will also attach two logs of running a full version, one log file when on
Wine 7.20, and one with today's Wine git head, which produce a slightly
different error message box: (translated from Finnish)
Error loading video
Error code 0xc00d5212
Video format or codec not supported
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48370
Bug ID: 48370
Summary: Virtual Magnifying Glass (Dynamic Mode) crashes on Mac
OS X
Product: Wine
Version: 5.0-rc2
Hardware: x86-64
URL: http://magnifier.sourceforge.net/
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
Created attachment 66118
--> https://bugs.winehq.org/attachment.cgi?id=66118
crash information
+++ This bug was initially created as a clone of Bug #48369 +++
$ openssl sha256 Vmg3.6_install.exe
SHA256(Vmg3.6_install.exe)=
2a22bd41b07b0589880c1ac822ff89de274da050631e2571c0bd9da4697ffdf7
$ wine --version
wine-5.0-rc2
Steps to reproduce:
1. Install Virtual Magnifying Glass and start it.
2. Click "Dynamic Mode".
Results: Wine crashes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48369
Bug ID: 48369
Summary: Virtual Magnifying Glass turns screen black on Mac OS
X
Product: Wine
Version: 5.0-rc2
Hardware: x86-64
URL: http://magnifier.sourceforge.net/
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
$ openssl sha256 Vmg3.6_install.exe
SHA256(Vmg3.6_install.exe)=
2a22bd41b07b0589880c1ac822ff89de274da050631e2571c0bd9da4697ffdf7
$ wine --version
wine-5.0-rc2
Steps to reproduce:
1. Install Virtual Magnifying Glass and start it.
2. Click "Classic Mode".
Results: Screen turns black, Magnifier present and responding to mouse input,
just not magnifying anything.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45461
Bug ID: 45461
Summary: OnScreenKeyboard Portable: App displays splash screen
but does not start
Product: Wine
Version: 3.12
Hardware: x86-64
URL: https://portableapps.com/apps/accessibility/on-screen_
keyboard_portable
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
Created attachment 61801
--> https://bugs.winehq.org/attachment.cgi?id=61801
log
After installing (extracting) OnScreenKeyboard Portable and tryin to run it, it
does show the splash screen but does not start the actual program.
$ openssl sha256 On-ScreenKeyboardPortable_2.0.paf.exe
SHA256(On-ScreenKeyboardPortable_2.0.paf.exe)=
12c4943e1d7a65a12f7c58ac5aac3430b98c5158f18a94c51c26036770af19df
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46820
Bug ID: 46820
Summary: 20XX (Game) needs native d3dcompiler_43.dll
Product: Wine
Version: 4.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: patoplc(a)live.com
Distribution: ---
The game 20XX won't start unless the native d3dcompiler_43.dll is provided.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42107
Bug ID: 42107
Summary: app kpg91d crashes when setting up serial port
selection
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kl7ut(a)ymail.com
Distribution: ---
Created attachment 56627
--> https://bugs.winehq.org/attachment.cgi?id=56627
backtrace from Wine kpg91d crash
Kenwood Radio programming software kpg91d crashes when accessing settings,
communications port dialogue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19833
Summary: the program hotkeynet.exe has encountered a serious
problem and needs to close
Product: Wine
Version: 1.1.28
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: goin2far(a)gmail.com
When starting the program Hotkeynet the error pops up and can get no further.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54833
Bug ID: 54833
Summary: Heroes of Might and Magic 5 crash on starting some
builtin maps, since wine 7.13
Product: Wine
Version: 8.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: galdralag(a)bk.ru
Distribution: ---
While answering on https://bugs.winehq.org/show_bug.cgi?id=39742#c21 I found
that I can't start many single player maps (Single Player -> Custom Game) -
game crashes. These maps was playable earlier. And playing on maps that can be
started game often occasionally crashes.
After investigation different versions I found this begins from wine 7.13 on
7.12 all ok.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50865
Bug ID: 50865
Summary: Map editor of Heroes of Might and Magic 5 completely
not working
Product: Wine
Version: 6.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: galdralag(a)bk.ru
Distribution: ---
Created attachment 69677
--> https://bugs.winehq.org/attachment.cgi?id=69677
Screenshot
Heroes of Might and Magic 5.
Map editor starts, shows left and right panels with games elements. But on
place of map it shoes garbage rectangle.
See attached screenshot.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54346
Bug ID: 54346
Summary: (Multithreaded) Applications sometimes get heap
corruption on exit due to ignoring critical sections
in Wine
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: dmusic
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
Distribution: ---
(Multithreaded) Applications sometimes get heap corruption on exit due to
ignoring critical sections in Wine. For instance dmloader:loader:
0118:warn:sync:RtlpWaitForCriticalSection process
L"Z:\\home\\fgouget\\wine\\wine-gitlab\\dlls\\dmloader\\tests\\i386-windows\\dmloader_test.exe"
is shutting down, returning STATUS_SUCCESS
...
0118:warn:sync:RtlpWaitForCriticalSection process
L"Z:\\home\\fgouget\\wine\\wine-gitlab\\dlls\\dmloader\\tests\\i386-windows\\dmloader_test.exe"
is shutting down, returning STATUS_SUCCESS
0118:err:sync:RtlLeaveCriticalSection section 00140074 "dlls/ntdll/heap.c: main
process heap section" is not acquired
Normally this does not cause the test to fail. But when running with
WINEDEBUG=heap this frequently leads to heap corruption because:
* Each call to the heap API triggers a heap validation.
* Each heap_validate() call is requires taking the main process heap lock.
* More contention makes the "not acquired" events more likely.
* Leading to multiple threads manipulating the heap at the same time, thus
causing corruption.
Also, be aware that when heap corruption is detected due to WINEDEBUG=heap,
Wine raises an exception which kills the process.
Also note that although dmloader:loader looks like it is not multithreaded (no
CreateThread() call), it loads dlls that create their own thread:
* winealsa.drv/midi.c -> notify_thread
* winealsa.drv/mmdevdrv.c -> alsa_timer_thread
* winepulse.drv/mmdevdrv.c -> pulse_mainloop_thread, pulse_timer_cb
...etc.
So this issue probably impacts most audio / multimedia applications and Wine
tests.
The "main process heap section is not acquired" errors most often look like
they are caused by the following functions which are all called on
DLL_PROCESS_DETACH:
* msacm32.MSACM_WriteCache() calling RegSetValueExA()
* ucrtbase.msvcrt_free_io() calling DeleteCriticalSection() when WINEDEBUG=heap
Ignoring the critical sections during shutdown is intentional and was
introduced by the 7def0f200f11 commit to fix bug 42470. See
RtlpWaitForCriticalSection():
/* Don't allow blocking on a critical section during process termination */
if (RtlDllShutdownInProgress())
{
WARN( "process %s is shutting down, returning STATUS_SUCCESS\n",
debugstr_w(NtCurrentTeb()->Peb->ProcessParameters->ImagePathName.Buffer) );
return STATUS_SUCCESS;
}
However that commit also had to add todo_wine statements to kernel32:loader so
it's not clear that is is correct.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46263
Bug ID: 46263
Summary: Final Fantasy XI crashes after accepting EULA when
using Ashita
Product: Wine-staging
Version: 3.21
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: winehq(a)foreversmall.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 62965
--> https://bugs.winehq.org/attachment.cgi?id=62965
Terminal Output with backtrace of crash.
When using Ashita with FFXI the game crashes shortly after accepting the EULA.
I've confirmed this with all the versions of wine starting from version 3.0
stable, all the way up to 3.21 staging. The only way I've been able to get the
game to launch is to compile wine myself with the following patch:
https://gitlab.com/farmboy0/wine/commit/54aea128e91a6b03bff05e79d9a09bea572…
Its very easy to recreate, use all the standard AppDB info to get FFXI setup.
Download ashita from the website:
https://git.ashitaxi.com/Ashita/Ashitav3-Launcher/raw/master/Ashita.exe
>From here you need all the ashita pre-reqs:
http://docs.ashitaxi.com/requirements/
Setup a config file with the settings ../Ashita/Config/Boot/
You can launch the game via this command: wine %path_to_Ashita%/injector.exe
"%CONFIGFILE%.xml"
If it properly loads then once you accept the EULA it will crash.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54794
Bug ID: 54794
Summary: Autodesk Fusion360: New SSO login will not open web
browser
Product: Wine
Version: 8.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: skala.antonin(a)gmail.com
Distribution: ---
Created attachment 74289
--> https://bugs.winehq.org/attachment.cgi?id=74289
Running processes
Autodesk rolled out new update (03 April) adding new SSO login instead of
build-in one. Clicking on Sign In button should open default browser and
redirect user into logIn page, but no browser will open (no error visible
inside console).
We tried to set http/https in HKEY_CLASSES_ROOT registers, also install windows
version of Firefox and ivent it runs, Fusion still refuses to open it.
Listing processes show, that new login component run (AdskIdentityManager.exe)
Exact steps we tried can be found there:
https://github.com/cryinkfly/Autodesk-Fusion-360-for-Linux/issues/319
Installer:
https://dl.appstreaming.autodesk.com/production/installers/Fusion%20360%20A…
-O Fusion360installer.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50643
Bug ID: 50643
Summary: IK Product Manager: Unable to download plugins
Product: Wine
Version: 6.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wmi&wbemprox
Assignee: wine-bugs(a)winehq.org
Reporter: gearoidburke(a)outlook.com
Distribution: ---
Created attachment 69355
--> https://bugs.winehq.org/attachment.cgi?id=69355
Wine log file.
IK Product Manger (https://www.ikmultimedia.com/products/productmanager/)
should be able to download and install VST plugins from IK Multimedia, however
upon clicking the install button for any plugin, the application will become
unresponsive for a minute or so before resuming as if nothing had happened. The
error in wine seems to be with wmic, with a wmic logicaldisk command failing.
The download location, by default ~/Documents/IK Multimedia/IK Product Manager,
is empty. Upon clicking the install button on a plugin again, nothing happens.
IK Product Manager installs and works as expected up until this point, provided
you have a dx11 compatibility layer like dxvk installed, though sometimes I
need to use wine-staging to get it to run properly.
I would have liked to have tested this in a 32 bit prefix so I could install
wmi, but the application is 64 bit only.
Wine version is 6.1-1, 64 bit architecture. Tested on both wine and
wine-staging.
OS is Arch Linux, 64 bit, kernel 5.10.
Hardware: Thinkpad X13 Yoga, Intel Core i5-10310U with Intel integrated
graphics.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46839
Bug ID: 46839
Summary: Happy Foto Designer Font not found "Fehler (Code 1)
[Font is not supported: Roboto]"
Product: Wine
Version: 4.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: martin.marmsoler(a)gmail.com
Distribution: ---
Hello,
while creating a new Photo book in Happy Foto
Designer(https://www.happyfoto.at/) I get the following error:
"Fehler (Code 1) [Font is not supported: Roboto]"
The error can be solved by installing gdiplus, but the fonts are not drawn
properly and only the first character is shown.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52064
Bug ID: 52064
Summary: Solidworks 2008 crashes on startup - Regression since
Wine 5.21
Product: Wine
Version: 6.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jpleonard12(a)gmail.com
Distribution: ---
Created attachment 71076
--> https://bugs.winehq.org/attachment.cgi?id=71076
Debug log file
SolidWorks 2008 worked well on Wine (32bit) up through Wine 5.21. After this,
it crashes on startup, once the full screen workspace is displayed. Sometimes
it allows the user to browse for a file, but will always crash before the
graphics are displayed.
Laptop on which SolidWorks 2008 is still working almost flawlessly:
---------------------------------------
Wine 5.21 (32bit/WinXP)
Linux Mint 18.3, kernel 4.4.0.159-generic
winetricks msxml6 vcrun2005 dotnet20
Mesa DRI Intel(R) Ivybridge Mobile
4.2 (Core Profile) Mesa 18.0.5
3.0 Mesa 18.0.5
Desktop on which SolidWorks crashes on startup
----------------------------------------------
Wine 6.21 (32bit/WinXP)
Linux Mint 20.1 kernel 5.11.0.40-generic
winetricks msxml6 vcrun2005 dotnet20
Mesa DRI Intel(R) HD Graphics 2500 (IVB GT1)
4.2 (Core Profile) Mesa 21.0.3
3.0 Mesa 21.0.3
Have also attempted to run in plain 64 bit wine instance, as well as many
combinations of msxml6, dotnet20, dotnet30, vcrun2005, gdiplus_winxp, as well
as most versions of Wine 5.22 thru 6.21. But the crash always occurs in the
same spot.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51458
Bug ID: 51458
Summary: Western Digital SSD Dashboard displays black screen
Product: Wine
Version: 6.12
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: alexhenrie24(a)gmail.com
Distribution: ---
Created attachment 70302
--> https://bugs.winehq.org/attachment.cgi?id=70302
Console output
The program installs, but when you try to run it, it just displays a black
screen. Console output is attached. I'm guessing this is the problem:
0130:fixme:hlsl_parser:declare_vars Complex initializers are not supported yet.
Dashboard version: 3.2.2.9
Installer version: 4.0.2.3
$ sha256sum DashboardSetup.exe
9670e6bd54e1e0729262f13ded12de56d0a02a0e29ba0c9e6e6cb3663de4c781
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45901
Bug ID: 45901
Summary: Avoid GPU synchronization due to GPU-CPU transfer
(Overwatch)
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: awesie(a)gmail.com
Distribution: ---
Created attachment 62422
--> https://bugs.winehq.org/attachment.cgi?id=62422
Patch to avoid GPU synchronization
One performance gap with Overwatch on Wine + AMD + Mesa is GPU synchronization
due to transfers from GPU texture to CPU texture. By using PBOs and
glReadPixels with GL_PIXEL_PACK_BUFFER, we can avoid this synchronization
leading to improved performance.
The attached patch is one approach to resolve the performance issue, but I am
not sure that it is the best way. Feedback is appreciated.
Also attached is before and after screenshots with Mesa's HUD. You can observe
that the buffer wait time decreases with the patched version. Both the before
and after screenshots are on wine-staging master plus my patch for 45723.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50297
Bug ID: 50297
Summary: Blindwrite 7 crashes with a stack overflow (followup
to #49092)
Product: Wine
Version: 5.7
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bernhardu(a)mailbox.org
Distribution: ---
Created attachment 68867
--> https://bugs.winehq.org/attachment.cgi?id=68867
Do wineserver calls on a different stack by using fibers.
I still can reproduce this issue with wine-6.0-rc1.
00f0:err:virtual:virtual_setup_exception stack overflow 4548 bytes in thread
00f0 addr 0x40e68e stack 0x21fe3c (0x220000-0x221000-0x320000)
(rr) bt 30
#0 0xb7db9b5e in __libc_disable_asynccancel (oldtype=0) at
../nptl/cancellation.c:72
#1 0xb7e35705 in __GI___writev (iovcnt=2, iov=0x222058, fd=3) at
../sysdeps/unix/sysv/linux/writev.c:26
#2 __GI___writev (fd=3, iov=0x222058, iovcnt=2) at
../sysdeps/unix/sysv/linux/writev.c:24
#3 0xb7bd68ae in send_request (req=0x2221ac) at
.../wine-git/dlls/ntdll/unix/server.c:213
#4 0xb7bd69f0 in server_call_unlocked (req_ptr=0x2221ac) at
.../wine-git/dlls/ntdll/unix/server.c:273
#5 0xb7bd6a4b in wine_server_call (req_ptr=0x2221ac) at
.../wine-git/dlls/ntdll/unix/server.c:289
#6 0xb7bcf1cd in NtOpenKeyEx (key=0x222340, access=131097, attr=0x2222b8,
options=0) at .../wine-git/dlls/ntdll/unix/registry.c:112
#7 0xb7bb11be in __wine_syscall_dispatcher () from
/home/benutzer/.local/share/rr/wine-1/mmap_pack_2_ntdll.so
#8 0x7bc0bdcc in NtOpenKeyEx@16 () from
/home/benutzer/.local/share/rr/wine-1/mmap_pack_343_ntdll.dll
#9 0x7b0561af in RegOpenKeyExW@20 (hkey=<optimized out>, name=0x46c06dc,
options=0, access=131097, retkey=0x222340) at
.../wine-git/dlls/kernelbase/registry.c:208
#10 0x006996a6 in ?? ()
#11 0x0069ab41 in ?? ()
#12 0x00699e14 in ?? ()
#13 0x0069a89b in ?? ()
#14 0x0069a84f in ?? ()
#15 0x0073bb4b in ?? ()
#16 0x007354d2 in ?? ()
#17 0x00736cc5 in ?? ()
#18 0x00736f53 in ?? ()
#19 0x00737f77 in ?? ()
#20 0x007384a9 in ?? ()
#21 0x00a9a1a7 in ?? ()
#22 0x00a99388 in ?? ()
#23 0x00a99394 in ?? ()
#24 0x00a99394 in ?? ()
#25 0x00a99394 in ?? ()
#26 0x00a99394 in ?? ()
#27 0x00a99394 in ?? ()
#28 0x00a99394 in ?? ()
...
I tried to have another look and got to the impression that blindwrite
expects RegOpenKeyExW and RegSetValueExW too use less stack.
I experimented a bit and one way to achive this was to do the work in these
functions on a different stack. Attached proof of concept uses fibers for this.
With this patch blindwrite can finish its stack exhaustion without visible
error
and shows the trial option dialog.
After one successful start that patch is no longer necessarry.
Another option to might be to use some more guard pages and switch them to
regular pages when we are inside wine code?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16911
Summary: WriteProcessMemory() not working for memory protected by
X11DRV_DIB_DoProtectDIBSection()
Product: Wine
Version: 1.1.12
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Keywords: patch, source
Severity: minor
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
Created an attachment (id=18660)
--> (http://bugs.winehq.org/attachment.cgi?id=18660)
test program
Hi, I have a test case here that works on WinXP but not Wine. I deliberately
wrote a standalone test case because I'm not sure which unit test to put it in.
It's in fact based off of dlls/kernel32/tests/virtual.c where the other
WriteProcessMemory() test is.
In this test case, we call CreateDIBSection() which returns a HBITMAP (hbitmap)
and some memory (mem). Next, we call SetDIBits() with hbitmap. We get into
X11DRV_SetDIBits(), where it calls X11DRV_DIB_Lock( physBitmap,
DIB_Status_GdiMod );.
This marks the memory (mem) as PAGE_NOACCESS, and leaves it in that state as
SetDIBts() returns. Normally if the process tries to access it, we get a page
fault that's handled by X11DRV_DIB_FaultHandler(), and everything works.
However, when the test code calls WriteProcessMemory(), we talk to wineserver
in NtWriteVirtualMemory(). In wine_server_call(), we do send_request(), where
writev() tries to read 'mem' and fails with EFAULT. This doesn't trigger
X11DRV_DIB_FaultHandler(), and WriteProcessMemory() fails.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12401
Summary: Support junction points, i.e.
DeviceIoCtl(FSCTL_SET_REPARSE_POINT/FSCTL_GET_REPARSE_PO
INT)
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Junction points are one of Microsoft's answers to symlinks.
Unix symlinks could be mapped into junction points.
This would allow applications (e.g. Picasa) avoid following
symlinks if they wanted to.
Also, the .net 2 installer would be happier in winxp mode if wine supported
junction points (see bug 10601):
"The .NET 2.0 Framework installer checks if the target volume is NTFS
filesystem
type and then uses the FSCTL_SET_REPARSE_POINT ioctl (used for mount points and
junctions) to create junction points for each registered assembly in Windows
SxS directory to GAC assembly directory (link target).
Basically the junction point is used to redirect access from one directory to
another."
Tommy Kho posted a patch to add a conformance test for
getting and setting junction points,
http://www.winehq.org/pipermail/wine-patches/2006-March/024956.html
but it was not accepted.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50098
Bug ID: 50098
Summary: FFXIV_Textools crashes on start
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: nsextyfour(a)protonmail.com
Distribution: ---
Created attachment 68574
--> https://bugs.winehq.org/attachment.cgi?id=68574
I try to start FFXIV_TexTools, and then try to copy the text from the error
dialog.
FFXIV Textools, a modding tool for Final Fantasy XIV, will not launch in Wine.
https://textools.dualwield.net/
It brings up an error window, and when I try to copy the text from it, the
window disappears due to a crash. If I click 'yes', I get another error window.
Clicking yes on this brings another, and then another. After the fourth, the
program closes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52250
Bug ID: 52250
Summary: windows.h WINE_NOWINSOCK check has been removed
Product: Wine
Version: 6.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winelib
Assignee: wine-bugs(a)winehq.org
Reporter: sacrom(a)gmail.com
Distribution: ---
I'm using winelib to compile a Windows/Linux application, where we want to use
the Linux code for threads, files system handling, network code, shared
memory... and we want WINE just for the Win32 GUI code (as we did not implement
a GUI in the Linux/Unix side just on Windows)
Since WINE 6.8 (due this commit
https://source.winehq.org/git/wine.git/commit/9603fba8943f9699e3af6fcfe4acb…)
the WINE_NOWINSOCK check:
#ifndef WINE_NOWINSOCK
#include <winsock.h>
#endif /* WINE_NOWINSOCK */
Has been removed, now my application does not compile as I'm mixing Linux
socket definitions with the WINE/Windows "winsock.h" file.
If I add this check to the file, the application does compile as with WINE 6.7
Is it possible to add the check back? or should this be done in another way
now?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54093
Bug ID: 54093
Summary: Tomb Raider Level Editor - Custom Level "Biohazard"
has problems loading Save-File
Product: Wine
Version: 7.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Hello everyone,
download link is at:
https://www.trle.net/levels/levels/2021/0621/TombRaider95-TRBiohazard.zip
with a sha256sum of:
bash-5.1$ sha256sum TombRaider95-TRBiohazard.zip
58b35b648ecaaab691ce9904833730953ae155b4556d752f70d0f0a7442bcfa7
TombRaider95-TRBiohazard.zip
Please note that it comes with its own Tomb4.exe and you don't need to have
your own copy of any "Tomb Raider" episode. Unpacking the .zip file and running
Tomb4.exe is fine. Still created its own prefix though.
The problem I am facing is that (at least in the first level) you can save your
game state (press Escape to get to menu and press the Arrow-Downkey) but then
in turn this new game state isn't being loaded.
The progress bar when loading the state goes to 100% but then nothing more
happens and you can't get back into the game from where you left off.
bash-5.1$ /sbin/lspci | grep VGA
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
Mullins [Radeon R2 Graphics]
bash-5.1$ wine --version
wine-7.22
Console output will follow in the next couple of minutes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50177
Bug ID: 50177
Summary: War Thunder Launcher doesn't render anything, just
spams d2d_geometry_sink_AddArc stubs
Product: Wine
Version: 5.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: d2d
Assignee: wine-bugs(a)winehq.org
Reporter: fzatlouk(a)redhat.com
Distribution: ---
Created attachment 68699
--> https://bugs.winehq.org/attachment.cgi?id=68699
stdout
It appears WarThunder Launcher might need d2d_geometry_sink_AddArc .
It keeps spaming "0108:fixme:d2d:d2d_geometry_sink_AddArc iface 0B274638, arc
0031DB90 stub!" with stuck window with background from underneath it.
Tested Wine 5.19 - 5.22 in Windows XP and Windows 10 modes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47116
Bug ID: 47116
Summary: Indiana Jones and the Emperor's Tomb: white line
Product: Wine
Version: 4.7
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: legluondunet(a)free.fr
Distribution: ---
Created attachment 64326
--> https://bugs.winehq.org/attachment.cgi?id=64326
screen captures with white lines
Hello,
to play Indiana Jones and the Emperor's Tomb with Wine, I know I have to:
- override dll msvcrt bug 27594
- disable vertex shader 12400
But now I have a new graphic issue with Wine 4.7 (even with staging version):
look at the screen captures I joined to this bug report, there are white lines.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49199
Bug ID: 49199
Summary: Wine on macOS no longer loads dylibs from /lib(64)
Product: Wine
Version: 5.6
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gcenx83(a)gmail.com
Starting from Wine-5.6 the libwine wrappers have been removed in favor of using
dlopen() however this now causes component in question to no longer load
embedded dylibs into /lib(64)
Here’s an example;
```907aaf9e72714293909351648827e7c5aebc12a3 is the first bad commit
commit 907aaf9e72714293909351648827e7c5aebc12a3
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Mon Apr 6 11:46:10 2020 +0200
gdi32: Use standard dlopen() instead of the libwine wrappers.
Signed-off-by: Alexandre Julliard <julliard(a)winehq.org>
dlls/gdi32/dibdrv/opengl.c | 12 +++++-------
dlls/gdi32/freetype.c | 20 ++++++++++----------
2 files changed, 15 insertions(+), 17 deletions(-)```
Any commit doing “ Use standard dlopen() instead of the libwine wrappers.” will
now experience this.
Previous behavior was the ability to simply embed dylibs into /lib(64) and
wine(64) would load them as needed, now rpath is required.
Winehq packages will also experience this issue worse once the current embedded
libraries swap to using dlopen()
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39859
Bug ID: 39859
Summary: WineHQ packages for wine-gecko and wine-mono
Product: Packaging
Version: unspecified
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: wine-packages
Assignee: wine-bugs(a)winehq.org
Reporter: dimesio(a)earthlink.net
CC: michael(a)fds-team.de, sebastian(a)fds-team.de
Distribution: ---
Most users of the distros we now package for are accustomed to installing
wine-gecko and wine-mono from packages. We should provide them.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53656
Bug ID: 53656
Summary: cannot install an update because of Conflicting Values
set for option
Product: Wine
Version: 7.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: thereal7kqx(a)gmail.com
Distribution: ---
Created attachment 73058
--> https://bugs.winehq.org/attachment.cgi?id=73058
the error
I am using LMDE 5, based on Debian, and this (bug?) is dragging me down
ive tried everything i can to remove this stuff, but the delete button is just
shaded black, or it spats out bullshit that it cant be removed.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54181
Bug ID: 54181
Summary: nothing provides wine-devel64 = 1:8.0.rc1-1.1 needed
by winehq-devel-1:8.0.rc1-1.x86_64
Product: Wine
Version: 7.18
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: thegamemaster(a)hotmail.com
Distribution: ---
In Fedora 37 KDE Spin on Toshiba Satellite L655.
Upon sudo dnf update -y
error returned
"Problem: cannot instal the best update candidate for package
winehq-devel-1:7.22-1.1.x86_66
- nothing provides wine-devel64 = 1:8.0.rc1-1.1 needed by
winehq-devel-1:8.0.rc1-1.1.x86_64
wine will not update.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54835
Bug ID: 54835
Summary: Installation failure in Ubuntu 22.04 LTS
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: saurabh.ghosh(a)nichi.com
Distribution: ---
Created attachment 74337
--> https://bugs.winehq.org/attachment.cgi?id=74337
Screenshot of the issue
I have been trying to install wine in my Ubuntu 22.04 LTS.
I have followed all the steps mentioned in (https://wiki.winehq.org/Ubuntu).
However, there is a critical conflict in ubuntu. It requires "libgd3:i386",
which when installed creates conflict with "libgd3" and removes packages
"colord, gnome-control-center, libgd3, libgphoto2-6 & libsane1 sane-utils".
Removal of "gnome-control-center" is unacceptable as it handles the ubuntu
settings app, also I need "colord" because I use night light settings.
I can't seem to find any workaround!
Please help.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47558
Bug ID: 47558
Summary: Ubuntu package for 4.12.1 cannot open project in Adobe
Premiere Pro 2.0
Product: Packaging
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-packages
Assignee: wine-bugs(a)winehq.org
Reporter: julius.schwartzenberg(a)gmail.com
CC: dimesio(a)earthlink.net, michael(a)fds-team.de,
sebastian(a)fds-team.de
Distribution: ---
Created attachment 64946
--> https://bugs.winehq.org/attachment.cgi?id=64946
output of Wine
When I run Adobe Premiere Pro 2.0 with Wine 4.12.1 in Ubuntu, I get the
following dialog when trying to open a project:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut
down. We will attempt to save your current project.
Rebuilding Wine myself from Git, currently the latest commit matches 4.12.1,
does not show this problem.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50692
Bug ID: 50692
Summary: Office 2019 Professional Plus doesn't install
Product: Wine
Version: 6.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: atillolann-1815(a)yopmail.com
Distribution: ---
Created attachment 69422
--> https://bugs.winehq.org/attachment.cgi?id=69422
Terminal Log
Tried intalling Office 2019 ProPlus Retail, after the loading screen the
installer crashes.
Using Wine 6.2-developer
Arch: x86_64
Distro: Linux Mint 19.0 Cinnamon 64 bit
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14010
Summary: RivaTuner 2.09 not work ,no overclocking or sensor
ability
Product: Wine
Version: 1.0.0
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dj--alex(a)ya.ru
RivaTuner 2.09 not work ,no overclocking or sensor ability
My videocard is very loud without this program!!
I and not only i, want to overclocking without BIOS VRAM rewrite.
Program can be downloaded free from
http://www.radeon.ru/
(Main menu left - newest version)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51360
Bug ID: 51360
Summary: vkGetDeviceProcAddr invalid behavior for functions
from extensions unsupported by host Vulkan instance
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winevulkan
Assignee: wine-bugs(a)winehq.org
Reporter: loothelion(a)nvidia.com
Distribution: ---
I believe the below may also be true for vkGetInstanceProcAddr, but I haven't
confirmed this locally.
The Vulkan 1.2.182 specification states the following about the behavior of
vkGetDeviceProcAddr:
> The table below defines the various use cases for vkGetDeviceProcAddr and
> expected return value for each case.
>
> The returned function pointer is of type PFN_vkVoidFunction, and must be cast to
> the type of the command being queried before use. The function pointer must only
> be called with a dispatchable object (the first parameter) that is device or a
> child of device.
>
> Table 2. vkGetDeviceProcAddr behavior
>
> device | pName | return value
> ---------------------------------------------------------------------------------------
> NULL | *[1] | undefined
> ---------------------------------------------------------------------------------------
> invalid device | *[1] | undefined
> ---------------------------------------------------------------------------------------
> device | NULL | undefined
> ---------------------------------------------------------------------------------------
> device | core device-level Vulkan command [2] | fp[3]
> ---------------------------------------------------------------------------------------
> device | enabled extension device-level commands [2] | fp[3]
> ---------------------------------------------------------------------------------------
> any other case, not covered above | NULL
>
> [1] - "*" means any representable value for the parameter (including valid
> values, invalid values, and NULL).
>
> [2] - In this function, device-level excludes all physical-device-level
> commands.
>
> [3] - The returned function pointer must only be called with a dispatchable
> object (the first parameter) that is device or a child of device e.g.
> VkDevice, VkQueue, or VkCommandBuffer.
Winevulkan's behavior differs from this slightly. Note the fifth row of the
table uses the language "enabled extension device-level commands", this means
that if a command is queried via vkGetDeviceProcAddr and isn't part of core,
the extension which introduces it must be enabled for the given VkDevice object
in order for vkGetDeviceProcAddr to return a valid function pointer, and
otherwise it should return NULL.
In order to properly conform to the Vulkan specification Winevulkan should only
expose device-level commands whose extensions have been enabled.
Note that applications should not be querying for Vulkan commands via
vkGetDeviceProcAddr if they know the extension is not supported by the
underlying implementation. However in the case of an application which does
rely on this bad behavior, Winevulkan will return a function pointer to one of
its thunks and then proceed to deference a null function pointer when it tries
to call into the underlying host Vulkan implementation.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47521
Bug ID: 47521
Summary: digikam 6.10 crashes on start
Product: Wine
Version: 4.11
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
Distribution: Gentoo
Created attachment 64913
--> https://bugs.winehq.org/attachment.cgi?id=64913
crash output
Backtrace:
=>0 0x66401f0a EntryPoint+0xb6a() in qt5widgets (0x006ff4f8)
1 0x1084cf64 WXMPUtils_DuplicateSubtree_1+0x44c5d3() in libdigikamcore
(0x737adae8)
2 0x10388bb9 EntryPoint+0x387818() in libdigikamcore (0x006ff5f8)
3 0x104c0cba WXMPUtils_DuplicateSubtree_1+0xc0329() in libdigikamcore
(0x006ff688)
4 0x2278b630 EntryPoint+0xba28f() in libdigikamgui (0x006ffab8)
5 0x2276e7b3 EntryPoint+0x9d412() in libdigikamgui (0x006ffb98)
6 0x00404be5 _ZN7Digikam6DColor11premultiplyEv+0x15e4() in digikam
(0x006ffe88)
7 0x00401382 EntryPoint+0xffffffff() in digikam (0x006fff28)
8 0x7b47e022 call_process_entry+0x11() in kernel32 (0x006fff48)
9 0x7b480acc start_process+0xeb(entry=<couldn't compute location>,
peb=<couldn't compute location>)
[Z:\home\austin\wine-git\dlls\kernel32\process.c:1297] in kernel32 (0x006fffd8)
10 0x7b47e02e start_process_wrapper+0x9() in kernel32 (0x006fffec)
0x66401f0a EntryPoint+0xb6a in qt5widgets: movl 0x4(%eax),%ecx
austin@laptop:~/Downloads$ du -sh digiKam-6.1.0-Win32.exe
321M digiKam-6.1.0-Win32.exe
austin@laptop:~/Downloads$ sha256sum digiKam-6.1.0-Win32.exe
fb870263a8bb2bd178590dfacfe68110b68d8c5b0ca53606084162a1a5e42b44
digiKam-6.1.0-Win32.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43993
Bug ID: 43993
Summary: Quick3270 5.21: crashes when using the Connect
function
Product: Wine
Version: 2.0.3
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: q3270(a)grr.la
Distribution: ---
Application crashes when I choose Session -> Connect option.
Application error messages is: "Could not find imported function in DLL
C:\windows\system32\ws2_32.dll"
Console output relevant messages:
fixme:module:load_library unsupported flag(s) used (flags: 0x00000800)
fixme:shell:SetCurrentProcessExplicitAppUserModelID
L"DN-Computing.Quick3270.DisplayEmulator": stub
fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled.
fixme:ntdll:NtQueryInformationToken QueryInformationToken( ..., TokenElevation,
...) semi-stub
fixme:htmlhelp:HtmlHelpW HH_PRETRANSLATEMESSAGE unimplemented
Application is available as trial here:
https://www.dn-computing.com/download.htm
Prior to launching the application I've installed wine-mono and wine-gecko.
Unsuccessfully tried:
- replacing ws2_32.dll with an original one
- debugging with +relay, the log doesn't show the missing procedure name
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51843
Bug ID: 51843
Summary: dlls/ws2_32/socket.c:839:17: error:
‘IP_ADD_SOURCE_MEMBERSHIP’ undeclared here
Product: Wine
Version: 6.18
Hardware: x86
OS: NetBSD
Status: NEW
Severity: blocker
Priority: P2
Component: winsock
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
gcc -c -o dlls/ws2_32/socket.o dlls/ws2_32/socket.c -Idlls/ws2_32 -Iinclude
-D__WINESRC__ -DUSE_WS_PREFIX -D_REENTRANT -fno-PIC
-fasynchronous-unwind-tables -Wall -pipe -fno-stack-protector
-fno-strict-aliasing -Wdeclaration-after-statement -Wempty-body
-Wignored-qualifiers -Wshift-overflow=2 -Wstrict-prototypes -Wtype-limits
-Wunused-but-set-parameter -Wvla -Wwrite-strings -Wpointer-arith -Wlogical-op
-march=i586 -gdwarf-2 -gstrict-dwarf -fno-omit-frame-pointer
-I/usr/pkg/include -I/usr/include -I/usr/pkg/include/freetype2
-I/usr/X11R7/include -O2 -I/usr/pkg/include -I/usr/include
-I/usr/pkg/include/freetype2 -I/usr/X11R7/include -g
dlls/ws2_32/socket.c:839:17: error: ‘IP_ADD_SOURCE_MEMBERSHIP’ undeclared here
(not in a function); did you mean ‘WS_IP_ADD_SOURCE_MEMBERSHIP’?
MAP_OPTION( IP_ADD_SOURCE_MEMBERSHIP ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:840:17: error: ‘IP_DROP_SOURCE_MEMBERSHIP’ undeclared here
(not in a function); did you mean ‘WS_IP_DROP_SOURCE_MEMBERSHIP’?
MAP_OPTION( IP_DROP_SOURCE_MEMBERSHIP ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:841:17: error: ‘IP_BLOCK_SOURCE’ undeclared here (not in a
function); did you mean ‘WS_IP_BLOCK_SOURCE’?
MAP_OPTION( IP_BLOCK_SOURCE ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:842:17: error: ‘IP_UNBLOCK_SOURCE’ undeclared here (not in
a function); did you mean ‘IP_BLOCK_SOURCE’?
MAP_OPTION( IP_UNBLOCK_SOURCE ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:923:17: error: ‘AI_ALL’ undeclared here (not in a
function); did you mean ‘P_ALL’?
MAP_OPTION( AI_ALL ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:923:17: warning: initialization makes integer from pointer
without a cast [-Wint-conversion]
MAP_OPTION( AI_ALL ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:923:17: note: (near initialization for
‘ws_aiflag_map[4][1]’)
MAP_OPTION( AI_ALL ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:923:17: error: initializer element is not constant
MAP_OPTION( AI_ALL ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c:923:17: note: (near initialization for
‘ws_aiflag_map[4][1]’)
MAP_OPTION( AI_ALL ),
^
dlls/ws2_32/socket.c:792:37: note: in definition of macro ‘MAP_OPTION’
#define MAP_OPTION(opt) { WS_##opt, opt }
^~~
dlls/ws2_32/socket.c: In function ‘WS_setsockopt’:
dlls/ws2_32/socket.c:5639:27: error: storage size of ‘mreq_source’ isn’t known
struct ip_mreq_source mreq_source;
^~~~~~~~~~~
dlls/ws2_32/socket.c:5856:24: error: request for member ‘imr_interface’ in
something not a structure or union
mreq_source.imr_interface.s_addr = val->imr_interface.S_un.S_addr;
^
dlls/ws2_32/socket.c:5856:38: error: request for member ‘s_addr’ in something
not a structure or union
mreq_source.imr_interface.s_addr = val->imr_interface.S_un.S_addr;
^
dlls/ws2_32/socket.c:5856:13: warning: statement with no effect
[-Wunused-value]
mreq_source.imr_interface.s_addr = val->imr_interface.S_un.S_addr;
^~~~~~~~~~~
dlls/ws2_32/socket.c:5857:24: error: request for member ‘imr_multiaddr’ in
something not a structure or union
mreq_source.imr_multiaddr.s_addr = val->imr_multiaddr.S_un.S_addr;
^
dlls/ws2_32/socket.c:5857:38: error: request for member ‘s_addr’ in something
not a structure or union
mreq_source.imr_multiaddr.s_addr = val->imr_multiaddr.S_un.S_addr;
^
dlls/ws2_32/socket.c:5857:13: warning: statement with no effect
[-Wunused-value]
mreq_source.imr_multiaddr.s_addr = val->imr_multiaddr.S_un.S_addr;
^~~~~~~~~~~
dlls/ws2_32/socket.c:5858:24: error: request for member ‘imr_sourceaddr’ in
something not a structure or union
mreq_source.imr_sourceaddr.s_addr =
val->imr_sourceaddr.S_un.S_addr;
^
dlls/ws2_32/socket.c:5858:39: error: request for member ‘s_addr’ in something
not a structure or union
mreq_source.imr_sourceaddr.s_addr =
val->imr_sourceaddr.S_un.S_addr;
^
dlls/ws2_32/socket.c:5858:13: warning: statement with no effect
[-Wunused-value]
mreq_source.imr_sourceaddr.s_addr =
val->imr_sourceaddr.S_un.S_addr;
^~~~~~~~~~~
dlls/ws2_32/socket.c:5861:20: warning: assignment makes integer from pointer
without a cast [-Wint-conversion]
optlen = sizeof(mreq_source);
^
dlls/ws2_32/socket.c:5639:27: warning: unused variable ‘mreq_source’
[-Wunused-variable]
struct ip_mreq_source mreq_source;
^~~~~~~~~~~
dlls/ws2_32/socket.c: In function ‘WS_gethostbyaddr’:
dlls/ws2_32/socket.c:6092:19: warning: implicit declaration of function
‘gethostbyaddr_r’; did you mean ‘gethostbyaddr’?
[-Wimplicit-function-declaration]
int res = gethostbyaddr_r(paddr, len, unixtype,
^~~~~~~~~~~~~~~
gethostbyaddr
dlls/ws2_32/socket.c: In function ‘WS_gethostbyname’:
dlls/ws2_32/socket.c:6284:23: warning: implicit declaration of function
‘gethostbyname_r’; did you mean ‘gethostbyname2’?
[-Wimplicit-function-declaration]
int res = gethostbyname_r(name, &hostentry, extrabuf, ebufsize,
&host, &locerr);
^~~~~~~~~~~~~~~
gethostbyname2
At top level:
dlls/ws2_32/socket.c:1796:12: warning: ‘set_ipx_packettype’ defined but not
used [-Wunused-function]
static int set_ipx_packettype(int sock, int ptype)
^~~~~~~~~~~~~~~~~~
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51770
Bug ID: 51770
Summary: digikam-7.1.0 freezes on start
Product: Wine
Version: 6.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: aros(a)gmx.com
Distribution: ---
Steps to reproduce:
1) Run
2) Click Next, Next, Next, Next, Next
3) It freezes
If you attempt to start it again, it just freezes without showing anything.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44073
Bug ID: 44073
Summary: Nier:Automata has blocky artifacts
Product: Wine
Version: 2.21
Hardware: x86
URL: http://www.mediafire.com/file/me8dsk3asiuqoiw/automata
.7z
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: dark.shadow4(a)web.de
Distribution: ---
Created attachment 59788
--> https://bugs.winehq.org/attachment.cgi?id=59788
Screenshot showing artifacts
Program only works with wine-staging, and you need CSMT enabled to avoid severe
graphical glitches.
I'm using mesa drivers on Linux 4.14.2.
I made an apitrace of the Direct3D calls(1.4GB, 543MB compressed), linked it in
the URL field.
It used to work, but even if I downgrade everything (wine, mesa, linux) I still
can't get it to work. Might be a driver issue, but I'm not sure.
Since I don't have another Linux system I can't really test it, I'd really
appreciate if someone tried to reproduce the issue.
You need to get the windows binaries for apitrace, and then just run "wine
apitrace.exe *.trace"
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52695
Bug ID: 52695
Summary: Titan Quest crashes at start with "0xc0000005
(EXCEPTION_ACCESS_VIOLATION)"
Product: Wine
Version: 7.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: enni(a)telsh.de
Distribution: ---
Hi!
After the latest WINE update to 7.4 the game "Titan Quest" (with or without
latest DLCs at latest version from GOG) does not start anymore.
After having had some issues with version 7.3 I did a clean reinstall of the
whole WINEPREFIX. Codewise this looks like:
$ cd $WINEPREFIX && cd ..
$ rm -rf $WINEPREFIX && mkdir $WINEPREFIX
Then I added some fonts and the codec to play the mp3 sound files, in the past
I did some tests and these were always needed:
$ winetricks corefonts tahoma l3codecx
Then I installed the game and tried to run it. The first chord of the
soundtrack is played a couple of times (sounds like an echo) and then the game
crashes. The screen stays black all the time, the mouse curser is like in the
game.
To check if it would solve the issue I installed a couple of libs/dlls:
* dsound
* dmusic
* directplay
* xvid
* allcodecs
and changed the sound setting "sound=pulse".
Unfortunately nothing solves the issue.
Attached is a dump text file, I would be able to provide the binary/debugger
file as well, it's ~2.5 MB large and I wasn't sure if it would be wasted here
because the txt file might be sufficient and is easier to read.
Also attached is the output of
$ winetricks list-all
after the initial installation with the fonts and codec.
And the output of
$ WINEDEBUG=+all wine TQ.exe
is attached as well.
Thanks alot for your support, I'd love to play this game again and would like
to update the wiki entry as well as soon as this is resolved. It looks like
somebody else with a Debian/Ubuntu system was able to install the same version
and there it works without any issue. So maybe it is related to that "strip"
issue that ArchLinux had?
Kind regards,
enni
PS: I see that I can only attach one file, will try to add the other files as
comment after creation.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41604
Bug ID: 41604
Summary: Access violation in CertAddSerializedElementToStore
Product: Wine
Version: 1.9.20
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: crypt32
Assignee: wine-bugs(a)winehq.org
Reporter: mterrisse(a)free.fr
Distribution: ---
Hello,
I am trying to work around this bug
https://bugs.winehq.org/show_bug.cgi?id=11070 (importpfx fails, needs
PFXImportCertStore implementation).
On Windows (10, 1607) I serialize a certificate to a buffer with
CertSerializeCertificateStoreElement, and write this buffer into a file.
On Linux (Ubuntu 16.10, PlayOnLinux, Wine 1.9.10) I read the buffer from the
file and I import it with CertAddSerializedElementToStore.
-> It fails and GetLastError returns STATUS_ACCESS_VIOLATION.
I had a look at the code: in crypt32/serialize.c (1.9.21),
CRYPT_ReadSerializedElement, you can read
__EXCEPT_PAGE_FAULT
{
SetLastError(STATUS_ACCESS_VIOLATION);
context = NULL;
}
__ENDTRY
So there is really an access violation.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38019
Bug ID: 38019
Summary: VLC is garbage if dragged to different monitor
Product: Wine
Version: 1.7.35
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: damianatorrpm(a)gmail.com
Distribution: ---
Install VLC media player.
Start some movie/video file.
Works fine as long as vlc is running on the monitor it was started on.
If you drag VLC with a running video to another monitor, the video freezes
(sound continues).
Easily reproducible and vlc is also gpl and can be found here:
http://www.videolan.org/vlc/download-windows.html
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42400
Bug ID: 42400
Summary: cscript.exe doesn't show errors
Product: Wine-gecko
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-gecko-unknown
Assignee: jacek(a)codeweavers.com
Reporter: kolan_n(a)mail.ru
Distribution: ---
When there is an error in a script cscript.exe outputs nothing.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41983
Bug ID: 41983
Summary: Creatures 2: applets can't connect to the main program
Product: Wine
Version: 1.9.8
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: skerit(a)kipdola.com
Distribution: ---
Created attachment 56393
--> https://bugs.winehq.org/attachment.cgi?id=56393
Creatures 2 console output when starting applet
The Creatures 2 game uses special applets (executables) that connect to the
main game.
This does not work, however:
the game will complain it can't connect to the applet.
There's no crash or anything, the applet just does nothing.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47070
Bug ID: 47070
Summary: DA: Inquisition can't see gamepad
Product: Wine
Version: 4.6
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: xinput
Assignee: wine-bugs(a)winehq.org
Reporter: timofeevsv1989(a)gmail.com
Distribution: ---
Dragon Age Inquisition uses xinput9_1_0.dll which not implemented properly.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13679
Summary: Trados: installation hanging due to failure at the
registration of assembly
Product: Wine
Version: 0.9.60
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: yolande(a)haneder.biz
Attached the log, it speaks for itself:
The part starting with fixme:atl:AtlModuleInit SEMI-STUB (0x40eb40 0x40c040
0x400000) at the end was on my console as I sent the rest to a text file.
May be related or not to bug 12930 (and the failure of the service to
initialize).
Both do not happen at the same time but they appeared in the same version.
I added mscoree as component because on another log (installation/repair of the
same problem) I saw that mscoree was loaded when mscorlib crashes.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48152
Bug ID: 48152
Summary: SDL Trados 2019 throws backtrace
Product: Wine
Version: 4.19
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 65766
--> https://bugs.winehq.org/attachment.cgi?id=65766
Backtrace (4.19 Staging)
Download URL is at: trados.sdlproducts.com/SDLTradosStudio2019Trial.exe
An entry for the AppDB has been submitted and I would like to post the
backtrace I got from wine 4.19-staging here.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46666
Bug ID: 46666
Summary: Al Unser, Jr Arcade Racing has weird colors
Product: Wine
Version: 4.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: haakobja(a)gmail.com
Distribution: ---
Created attachment 63612
--> https://bugs.winehq.org/attachment.cgi?id=63612
Screenshot showing wrong colors
Hi,
I have recently tried Al Unser, Jr. Arcade Racing with Wine, the game itself is
from 1995 so its is quite old. I was just curious. I have managed to get the
game working, but the colors is not right. The game requires an 8 bit display,
otherwise it refuses to start.
I followed the recommendations and used the following commands:
$ Xephyr :1 -screen 800x600x8 -cc 3 &
$ DISPLAY=:1 wine alunser.exe
The game starts, but the colors are wrong. As displayed in my attached image.
A demo, which displays the same colors, are available at:
https://archive.org/details/Alunser. There's also an image displaying the
colors as they should be.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47490
Bug ID: 47490
Summary: GlobalLock different behavior
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: ghotik2002(a)yahoo.com
Distribution: ---
Different behavior of GlobalLock in DxWnd GUI routine.
This is an extract of source code:
IStream *pStream = 0;
CreateStreamOnHGlobal(0, TRUE, &pStream);
LONG cbSize = 0;
hr = pPicture->SaveAsFile(pStream, TRUE, &cbSize);
if(FAILED(hr)) {
OutTrace("GrayIcon: SveAsFile error hr=%#x\n", hr);
return NULL;
}
HGLOBAL hBuf = 0;
hr = GetHGlobalFromStream(pStream, &hBuf);
if(FAILED(hr)) {
OutTrace("GrayIcon: GetHGlobalFromStream error hr=%#x\n", hr);
return NULL;
}
buf = (BYTE *)GlobalLock(hBuf);
if(buf == NULL) {
OutTrace("GrayIcon: GlobalLock error err=%d\n", GetLastError());
return NULL;
}
the stream holds an icon picture, everything is ok but the GlobalLock call:
- in Windows it returns a valid memory address
- in Wine/Linux it returns NULL errno 157 ERROR_DISCARDED - The segment is
already discarded and cannot be locked.
All this is in DxWnd program run on Wine/Linux environment.
P.s. my first bug report here - hope everything is more or less ok ... ;)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38040
Bug ID: 38040
Summary: Cubic Castles: fog effect doesn't work properly
Product: Wine
Version: 1.7.36
Hardware: x86
URL: http://ccdownload.blob.core.windows.net/ccwindows/Cubi
cCastlesWindowsSetup.exe
OS: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Distribution: ---
Created attachment 50675
--> https://bugs.winehq.org/attachment.cgi?id=50675
screenshot
The distance fog effect isn't rendered properly and almost everything is white
in the game. Only the HUD, character names and the chat window is visible.
The same problem with Wine 1.4, 1.6 etc. Native d3dx9* libraries don't change
the picture at all. Disabling GLSL doesn't help either.
Terminal output:
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:win:EnumDisplayDevicesW ((null),0,0x33f7f8,0x00000000), stub!
fixme:d3d:wined3d_check_device_format_conversion wined3d 0x139430, adapter_idx
0, device_type WINED3D_DEVICE_TYPE_HAL, src_format WINED3DFMT_B8G8R8X8_UNORM,
dst_format WINED3DFMT_B8G8R8X8_UNORM stub!
err:ole:CoCreateInstance apartment not initialised
fixme:g711:G711_StreamSize
err:d3d:wined3d_debug_callback 0x172be8: "GL_INVALID_VALUE error generated.
Width and height must not be negative.".
err:d3d:scissorrect >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glScissor @
state.c / 4972
...
The last lines are repeating over and over.
Fedora 21
Nvidia binary drivers 340.76
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28362
Summary: mshtml/events.ok is flaky, times out sometimes on some
machines?
Product: Wine
Version: 1.3.28
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: mshtml
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
I just had a timeout on mshtml/events.ok.
http://test.winehq.org/data/tests/mshtml:events.html shows a number of
timeouts on at least two windows machines, so I may not be alone.
My log showed
../../../tools/runtest -q -P wine -M mshtml.dll -T ../../.. -p
mshtml_test.exe.so events.c && touch events.ok
...
fixme:mshtml:nsURI_EqualsExceptRef (0x20cc770)->(0x1799d8 0x33efb4)
fixme:mshtml:nsHttpChannelInternal_SetDocumentURI (0x1dec0a8)->()
fixme:mshtml:HttpNegotiate_GetRootSecurityId (0x17ab88)->(0x33efdc 0x33efac 0)
and then hung for 20 minutes until buildbot killed it.
This was with WINEDEBUG=warn+heap, if it matters, and the machine it
happened on was
os: Ubuntu 10.04.3 LTS, 2.6.32-33-generic, pulseaudio
0.9.21-63-gd3efa-dirty, Advanced Linux Sound Architecture Driver Version
1.0.21.
ram: 3212 MB
cpu: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
gpu: GeForce GT 240/PCI/SSE2 3.2.0 NVIDIA 195.36.24
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41731
Bug ID: 41731
Summary: vb custom control not work
Product: Wine-staging
Version: 1.9.23
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: lokesh.bhandari(a)enjayworld.com
CC: erich.e.hoover(a)wine-staging.com, michael(a)fds-team.de,
sebastian(a)fds-team.de
Distribution: ---
I have a visual basic 6 base application. In application enter key will go
cursor to next field in windows and in backspace will go to cursor to previous
field in windows. But in wine-staging 1.9.23 and all other version this
functionality not work. So please suggest me for this. Download link is below
for application.
http://piracyfreeos.org/partner/down.php
log for application is
fixme:winediag:start_process Please report bugs at http://bugs.wine-staging.com
(instead of winehq.org).
fixme:ntoskrnl:IoGetConfigurationInformation partial stub
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42493
Bug ID: 42493
Summary: Kritika Online startup fails (Xigncode problem?)
Product: Wine
Version: 2.1
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: wyrex(a)openmailbox.org
Distribution: ---
Created attachment 57360
--> https://bugs.winehq.org/attachment.cgi?id=57360
game launch from patcher
Kritika Online MMO freezes at startup. Game patces succesfully in 32-bit prefix
with ie7 installed. When I click "Game Start" empty game window opens and after
10 seconds Xigncode flashes in bottom corner. Then only this message spams
continously until I forcekill it.
fixme:virtual:get_section_name (0x348,0x340000,0x33ba48,528,0x33ba44):
semi-stub
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42596
Bug ID: 42596
Summary: The Secret World: Shadows Render Incorrectly
Product: Wine-staging
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: padreadamo(a)gmail.com
CC: erich.e.hoover(a)wine-staging.com, michael(a)fds-team.de,
sebastian(a)fds-team.de
Distribution: ---
Created attachment 57537
--> https://bugs.winehq.org/attachment.cgi?id=57537
Incorrect shadow rendering
Shadows do not render correctly in "The Secret World," an MMORPG that is
getting a relaunch later this year, using Staging (CSMT) or not. There are not
settings (in the game) that change the outcome of the shadows not rendering
correctly. In addition, this was checked using several different GPUs and CPUs
to rule-out possible hardware (AMD CPU vs Intel CPU and AMD 7970/AMD R270m).
This game uses the Dreamworld engine which is also used in "Age of Conan."
The attachment shows an in-game screenshot of the shadow rendering. This is my
first bug report here.
Link to download the client: http://cdn.funcom.com/tsw/live/setup.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54211
Bug ID: 54211
Summary: Wine dependency issue on Aarch64 ubuntu kinetic
Product: Wine
Version: unspecified
Hardware: aarch64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: engagehitsmail(a)gmail.com
Distribution: ---
Created attachment 73754
--> https://bugs.winehq.org/attachment.cgi?id=73754
Wine dependency issue
The installation of wine is not successful in linux aarch64 with Ubuntu kinetic
OS.
After following the instructions from the following wiki, the installation
fails due to dependency.
Wiki: https://wiki.winehq.org/Ubuntu
How to replicate?
Install Ubuntu kinetic OS in Aarch64 and run the commands as mentioned in the
wiki.
Oracle is providing free host and I tried on that host.
https://www.youtube.com/watch?v=NKc3k7xceT8
Issue with Dependencies required:
wine-stable:i386 : Depends: libc6:i386 (>= 2.34) but it is not installable
Depends: wine-stable-i386:i386 (= 7.0.1~kinetic-1) but it
is not going to be installed
Please find the attachment for logs.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52219
Bug ID: 52219
Summary: Java 8 offline installer crashes
Product: Wine
Version: 6.23
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: joseskvolpe(a)gmail.com
Distribution: ---
Created attachment 71291
--> https://bugs.winehq.org/attachment.cgi?id=71291
Crash backtrace
Java 8 installer displays, but crashes after clicking "Next" button
Procedure:
1 - Download Java offline installer and open it
2 - Click Next
Download: https://www.java.com/pt-BR/download/manual.jsp
jre-8u311 were tested the time this bug report is being written. Both 64-Bits
and 32-Bits versions has the same issue
64-Bits SHA1: 1ff669c31b79955775026a58bb2952daf204aa53
32-Bits SHA1: 10e428c0b52e89feb71c485bc4098768ff39c390
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51531
Bug ID: 51531
Summary: DrMingw problem
Product: Wine
Version: 6.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: vladimir.kokovic(a)gmail.com
Distribution: ---
Although I installed DrMingw, wine doesn't call him if the exception occurs.
d: && cd \drmingw-0.9.3-win64\bin && drmingw -i -v
Dr.Mingw has been installed as default application debugger
wine64 version=wine-6.13-173-g04d52eb83fa
/mnt/WD-Elements-25A1/src/wine-git/install64/system.reg
...
[Software\\Microsoft\\Windows NT\\CurrentVersion\\AeDebug] 1623820558
#time=1d7626eb12154b6
"Auto"="1"
"Debugger"="\"d:\\drmingw-0.9.3-win64\\bin\\drmingw.exe\" -p %ld -e %ld -v"
...
[Software\\Wow6432Node\\Microsoft\\Windows NT\\CurrentVersion\\AeDebug]
1623820558
#time=1d7626eb121692e
"Auto"="1"
"Debugger"="\"d:\\drmingw-0.9.3-win64\\bin\\drmingw.exe\" -p %ld -e %ld -v"
...
/asoft-src/ispp-64/linux/cross-compile/llvm-mingw/ispp64-llvm-mingw-start.sh
0110:fixme:process:CmdBatNotification 1
0110:fixme:process:CmdBatNotification 0
[root@vlada-kuci tmp 00:41:04]$ wine: Unhandled division by zero at address
000000014000F806 (thread 0120), starting debugger...
0120:err:seh:start_debugger Couldn't start debugger L"" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: Unhandled page fault on write access to 0000000000000000 at address
00007F96D844E9BB (thread 0070), starting debugger...
0070:err:seh:start_debugger Couldn't start debugger L"" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
Vladimir Koković, DP senior(70), Serbia, Belgrade, 28.July 2021
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53591
Bug ID: 53591
Summary: Raspberry Pi OS Bullseye arm64 running 32-bit windows
app (AirMail)
Product: Wine
Version: unspecified
Hardware: aarch64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mgrushinskiy(a)gmail.com
Distribution: ---
Created attachment 72975
--> https://bugs.winehq.org/attachment.cgi?id=72975
install script for everything
I'm installing box86 and wine on Raspberry Pi Bullseye arm64 using
attached script.
I get the following error trying to run the app (AirMail):
WINEPREFIX=${HOME}/wine-air wine/bin/wine wine-air/drive_c/Program\
Files/Airmail/Airmail3.exe
Box86 with Dynarec v0.2.3 3a7cc57f built on Jul 9 2021 17:31:35
Box86 with Dynarec v0.2.3 3a7cc57f built on Jul 9 2021 17:31:35
Box86 with Dynarec v0.2.3 3a7cc57f built on Jul 9 2021 17:31:35
Box86 with Dynarec v0.2.3 3a7cc57f built on Jul 9 2021 17:31:35
0024:err:winediag:nodrv_CreateWindow Application tried to create a window, but
no driver could be loaded.
0024:err:winediag:nodrv_CreateWindow The explorer process failed to start.
0024:err:secur32:process_attach Failed to load gnutls_session_channel_binding
0024:err:secur32:SECUR32_initSchannelSP no schannel support, expect problems
wine: Unhandled exception 0x0eedfade in thread 24 at address 7B0110D6 (thread
0024), starting debugger...
Box86 with Dynarec v0.2.3 3a7cc57f built on Jul 9 2021 17:31:35
winedbg detected, not launching it!
0024:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 32 140"
(1359)
Read the Wine Developers Guide on how to set up winedbg or another debugger
What did I do wrong? I've seen reports from other people that that app
works on Raspberry Pi Buster with box86.
Thanks
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43353
Bug ID: 43353
Summary: Planet Skies
Product: Wine
Version: 1.7.3
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: katyaholubitsky11(a)gmail.com
Created attachment 58700
--> https://bugs.winehq.org/attachment.cgi?id=58700
the backtrace is an attachment that shows up whenever i try to use OpenGL or
Direct3G.
When i try to click OpenGL,it wouldn't let me play,the screen goes black and
this popup shows up,
and when i try to use Direct3G, the same popup shows up.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33446
Bug #: 33446
Summary: Left 4 Dead: Player outlines may appear distorted
Product: Wine
Version: 1.5.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: CFSworks(a)gmail.com
Classification: Unclassified
Created attachment 44258
--> http://bugs.winehq.org/attachment.cgi?id=44258
Distorted player outlines: UseGLSL=enabled, shader detail level = very high
In Left 4 Dead, with the shader detail level set to high/very high, and
UseGLSL=enabled, there is some distortion in the outlines of characters through
walls.
At medium/low shader detail, the outlines appear as they should. Likewise,
setting UseGLSL=disabled corrects the image, so this may be a bug in Wine's
GLSL generator.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38275
Bug ID: 38275
Summary: DeferWindowPos accept NULL HWND and fail at
EndDeferWindowPos()
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: rozhuk.im(a)gmail.com
Distribution: ---
http://source.winehq.org/git/wine.git/blob/e882cdf55cc004b5ffb7b85d912b4733…
DeferWindowPos( HDWP hdwp, HWND hwnd...
does not check: hwnd != NULL (windows does!)
and later EndDeferWindowPos() fail in
http://source.winehq.org/git/wine.git/blob/e882cdf55cc004b5ffb7b85d912b4733…
X11DRV_SetWindowPos(...)
...
763 /* Fix redundant flags */
764 if (!fixup_flags( winpos )) return FALSE;
fixup_flags()
...
WND *wndPtr = WIN_GetPtr( winpos->hwnd );
382 BOOL ret = TRUE;
383
384 if (!wndPtr || wndPtr == WND_OTHER_PROCESS)
385 {
386 SetLastError( ERROR_INVALID_WINDOW_HANDLE );
387 return FALSE;
388 }
Miranda NG was affected.
Workaround:
if (NULL != hwnd) /* Wine fix. */
hdwp = DeferWindowPos(hdwp, hwnd...);
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46943
Bug ID: 46943
Summary: Theme Park World crashes at startup
Product: Wine
Version: 4.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: haakobja(a)gmail.com
Distribution: ---
Created attachment 64065
--> https://bugs.winehq.org/attachment.cgi?id=64065
Log with exception
Hi,
I'm trying to get Theme Park World to start with Wine. I've set the Windows
version to Windows 2000 (as stated in bug 37802), and the game is updated to
version 2.0.
The copy protection seems to work, but after the initial splash screen is gone
I immediately get the following exception:
> 0035:err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7b46b76e
When I try with the no-cd crack, the game runs as it should.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28420
Summary: serious problem in running schrankplaner.exe
Product: Wine
Version: unspecified
Platform: x86
URL: javascript:downloahttp://www.schrankplaner.de/deu/4_Pl
anen&Bestellen/41_GratisSoftware/45_Gratis-Software.ht
ml?PHPSESSID=25bda3c1dc1d0b9440e7c516aaa00b46d('./soft
ware_de/schrankplaner_setup.exe','1')
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: muemarco(a)gmail.com
after installing the program successfully by creating a .verb file and running
it with the command winetricks schrankplaner.verb, the program crashes when I
start it from the wine program list.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10791
Summary: RPG Maker XP 10.2a: Does not play Background Music (BGM)
and Background Sounds (BGS)
Product: Wine
Version: 0.9.50.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-directx-dsound
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hen.asraf(a)gmail.com
Background Music and Background Sounds cannot be played with Wine.
It is possible to play them in your own media player and such, and then just
choose to use the preferred file to be played when playing. It will play on
Windows machines, only it won't under Wine.
No errors occur, the sound simply does not play.
Sound Effects (SE) and Music Effects (ME) do work.
It might have something to do with the file type and media codec.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54765
Bug ID: 54765
Summary: d2d drawing issues with the program RootsMagic 8 or 9
Product: Wine
Version: 8.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: d2d
Assignee: wine-bugs(a)winehq.org
Reporter: sargenthp(a)gmail.com
Distribution: ---
With the version of Wine 8.x RootsMagic 9 is not drawing properly. It might
show the controls, but soon as the cursor is moved into the window the controls
disappear. If you move the window the controls will repaint once in awhile.
Rootsmagic can be downloaded and installed. Installation works fine... But
immediately you will be able to see the results once rootsmagic is opened.
Here are some of the messages I see with some attempt of removing duplicates...
007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005
0024:fixme:nls:RtlGetThreadPreferredUILanguages 00000038, 000000000011D57C,
0000000000000000 000000000011D5D8
0024:fixme:nls:get_dummy_preferred_ui_language (0x38 0x409 000000000011D57C
0000000000000000 000000000011D5D8) returning a dummy value (current locale)
0024:fixme:d2d:d2d_device_context_DrawGeometry Ignoring stroke style
000000000BD28B50.
0024:fixme:d2d:d2d_device_context_PushLayer iface 000000000BD329A0,
layer_parameters 000000000011E648, layer 000000000BD33470 stub!
0024:fixme:d2d:d2d_text_renderer_DrawGlyphRun Ignoring options 0x2.
0024:fixme:d2d:d2d_device_context_Flush iface 000000000BD26520, tag1
000000000011D8F8, tag2 000000000011D8F0 stub!
0024:fixme:d2d:d2d_device_context_Flush iface 000000000BD336B0, tag1
000000000011D858, tag2 000000000011D850 stub!
0024:fixme:d2d:d2d_device_context_PopLayer iface 000000000BD329A0 stub!
0024:fixme:d2d:d2d_device_context_PushLayer iface 000000000BD329A0,
layer_parameters 000000000011E648, layer 000000000BD2DE50 stub!
0024:fixme:d2d:d2d_device_context_Flush iface 000000000BD33EB0, tag1
000000000011D8F8, tag2 000000000011D8F0 stub!
0024:fixme:d2d:d2d_device_context_Flush iface 000000000BD34160, tag1
000000000011D858, tag2 000000000011D850 stub!
0024:fixme:d2d:d2d_device_context_PopLayer iface 000000000BD329A0 stub!
0024:fixme:d2d:d2d_text_renderer_DrawGlyphRun Ignoring options 0x2.
0024:fixme:d2d:d2d_device_context_PushAxisAlignedClip Ignoring antialias_mode
0.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38117
Bug ID: 38117
Summary: Fallen Enchantress: map screen is black unless
'ClothMapOnly' option is enabled
Product: Wine
Version: 1.7.36
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Distribution: ---
Created attachment 50801
--> https://bugs.winehq.org/attachment.cgi?id=50801
terminal output
The map screen is black, only some HUD elements can be seen.
The game contains configuration options in ~/My
Games/FallenEnchantress/Prefs.ini
If I set the option 'ClothMapOnly=1' then the map is rendered properly.
The same problem with Wine 1.4/1.6.
Native d3dx9_41 was used to start the game.
Disabling GLSL doesn't help.
Fedora 21
Nvidia binary drivers 340.76
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46164
Bug ID: 46164
Summary: Graphics blurry/garbled in Unigine Superposition
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: cybermax(a)dexter.no
Distribution: ---
Graphics is blurry/garbled in Unigine Superposition running in "DirectX" or
"OpenGL" mode with "medium" or higher "shader quality".
Setting "shader quality" to "low" seems ok in both OpenGL and DirectX mode.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33053
Bug #: 33053
Summary: Support for dvorak programmer layout.
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gitterrost4+winehq(a)gmail.com
Classification: Unclassified
Created attachment 43693
--> http://bugs.winehq.org/attachment.cgi?id=43693
Patch to add support for dvorak programmer's layout.
There currently is no support for the dvorak programmer's layout in wine. The
layout can be found here:
http://kaufmann.no/roland/dvorak/index.html
The symptom of this problem is:
In Guild Wars, if I try to bind the key with the ampersand on it (where the 1
would usually be on a standard US-Keyboard) to an action, it just does nothing,
as if i hadn't pressed any key.
The same goes for Diablo III. If I try to bind this key, it says
"!!!MISSING!!!".
Writing in these apps currently works as expected (i.e. in Chats or Messages).
I have altered the File dlls/winex11.drv/keyboard.c, and it kind of works. (see
the attached Patch)
When I press the ampersand-key in the patched version, it registers, but shows
up as "1" in the options dialog. This is no problem for gameplay, it just looks
weird.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51436
Bug ID: 51436
Summary: Resident Evil 7 has wrong lights/shadows rendering
(OpenGL renderer)
Product: Wine
Version: 6.12
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 70290
--> https://bugs.winehq.org/attachment.cgi?id=70290
example
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1224.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1224.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 26628.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3384.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 7800.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 948.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 13620.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1992.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 4656.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 23712.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 23712.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 6924.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 10590.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 7392.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 23004.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3228.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3564.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1512.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3588.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 112176.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 23712.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 23712.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 8448.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 8448.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 6306.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1224.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 26628.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 2982.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 7800.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3132.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 3678.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 10692.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 5760.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 1992.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 4656.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
07d8:fixme:d3d:wined3d_context_gl_draw_indirect Ignoring index offset 62244.
wine-6.12-162-gd10887b8f56
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42729
Bug ID: 42729
Summary: Corrupted graphics in Wolcen: Lords of Mayhem
(DX11/CryEngine)
Product: Wine
Version: 2.4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx11
Assignee: wine-bugs(a)winehq.org
Reporter: fincer89(a)hotmail.com
Distribution: ---
Created attachment 57716
--> https://bugs.winehq.org/attachment.cgi?id=57716
Wolcen: Lords of Mayhem, corrupted graphics, DX11. Console output
As stated in the title, this DX11/CryEngine Steam game has corrupted graphics
when running on Wine.
Console output as an attachment (while the game was running).
Configuration:
Clean 64-bit prefix, Windows Steam, Wine 2.4 (git), Wine 2.4 Staging (git). No
Staging stuff enabled in winecfg.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37533
Bug ID: 37533
Summary: Dragon Age Origins: Crashes in some parts of the game
Product: Wine
Version: 1.6.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: claw(a)triple6.org
Distribution: ---
Created attachment 49953
--> https://bugs.winehq.org/attachment.cgi?id=49953
Backtrace of a crash
I noticed that Dragon Age Origins crashes in some parts of the game. See the
backtrace attached. Its always in the same locations or sequences.
I also noticed that lowering the graphical settings can help and i can pass
beyond this crashes.
I mostly happens when many textures need to be loaded.
This was tested on AMD (radeon driver 7.5.0), nvidia ( proprietary 340.46) and
intel ( 2.21.15 ).
There are also other graphics related issues in the game like video sequences
displaying just a black screen and sometimes glitches like black textures.
I'll test it against current 1.7 release of wine if i find some time to compile
it and wipe my ~/.wine.
Thanks for wine by the way.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32230
Bug #: 32230
Summary: Incanto does not display main screen background
Product: Wine
Version: 1.5.17
Platform: x86
URL: http://www.izzygames.com/incanto-t2952.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andrew.millington(a)gmail.com
Classification: Unclassified
Good indicators of why it happens is it display a message a few times at the
start of which you have to dismiss to get to the main screen.
--*.frag--
Fragment shader failed to compile
Vertex shader failed to compile
Having d3dx9_36 does is not a workaround nor does it allow you to proceed into
the game but that could be unrelated.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50893
Bug ID: 50893
Summary: Wine cannot see home directory
Product: Wine
Version: 6.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: winehome(a)dispostable.com
Distribution: ---
Created attachment 69703
--> https://bugs.winehq.org/attachment.cgi?id=69703
output of "wine explorer ~/"
Steps to reproduce: With a fresh install and prefix (WINEARCH 32 or 64 bit),
run "wine explorer" and navigate to /home.
Expected behaviour: A list of all folders in /home appears.
Actual behaviour: One user home folder, /home/user1, is missing from the list.
Other user home folders, e.g. /home/user2, are shown as expected.
Permissions for /home/user1 and /home/user2 are the same. The absence of
/home/user1 persists, regardless of whether wine is run under user1 or user2.
Running "wine explorer ~/" gives
0144:err:explorer:make_explorer_window Failed to create PIDL for
L"Z:\\home\\user1".
This also affects all file dialogs in other software and opening a file in
/home/user1 with an associated wine executable.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25759
Summary: crash when running game "Polda" and moving their
(game) window
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: prescott66(a)gmail.com
Created an attachment (id=32832)
--> (http://bugs.winehq.org/attachment.cgi?id=32832)
crash log game "Polda"
this bug is about one older game named "Polda".it is edited to works OK on
Windows XP and it works on real Windows XP.
But when i run it on Linux (Fedora 14, 32-bit, wine ver:1.3.11) game hangs and
when i try to move window, game crashes. log is attached.
i can upload somewhere that game if you will, thats no problem because its not
big game(cca 100MB).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54323
Bug ID: 54323
Summary: user32:input - test_SendInput() sometimes gets an
unexpected 0xc042 message on Windows 7
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
user32:input - test_SendInput() sometimes gets an unexpected 0xc042 message on
Windows 7:
input.c:4583: Test failed: SendInput triggered unexpected message 0xc042
This failure has not happened in the WineTest runs yet.
The first known instance is from MR693 (2022-08-22) and 8 merge request
versoins have been impacted since, the latest of which is MR1949 where it
happened twice.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=53516
Bug ID: 53516
Summary: user32:input failed due to unexpected WM_TIMECHANGE
message
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
user32:input failed due to unexpected WM_TIMECHANGE message:
input.c:4525: Test failed: SendInput triggered unexpected message 0x1e
https://test.winehq.org/data/patterns.html#user32:input
This happened on 2022-08-05 in the w10pro64-fr-64 test configuration.
But user32:msg has also received such an unexpected message on 2022-08-02 on
w10pro64-pt-BR-64 (see bug 53273).
It appears this message is sent by Windows when an application modifies the
system time. If the application is another test then it should make sure all
such messages have been sent before continuing.
But it is quite possible that this message is sent when Windows resynchronizes
with some internet time server in which case this message could arrive in any
test at any time.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51477
Bug ID: 51477
Summary: user32:input test_Input_blackbox() gets unexpected
00&41(A) keystate changes
Product: Wine
Version: 6.10
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
test_Input_blackbox() gets unexpected 00&41(A) keystate changes:
https://test.winehq.org/data/patterns.html#user32:input
input.c:757: Test failed: 0 (a4/0): 00 from 00 -> 81 unexpected
input.c:757: Test failed: 0 (a4/0): 41 from 00 -> 01 unexpected
* This exclusively happens for the first sendinput_test entry which is supposed
to simulate pressing the left Alt key (VK_LMENU == 0xa1).
* I do not know what the 00 virtual key code corresponds to. According to the
failure message this key is getting pressed down and toggled.
* The 41 virtual key code should be the 'A' key but that's not a toggle key
(unlike, e.g., Caps Lock) so the low order bit should be meaningless. So it's
strange that it changed from off to toggled.
* These failures happen on the following machines:
(41 corresponds to 100% reproducible, some machines may have fewer than 41
runs)
17 2008_newtb-w2008s64-32
1 2008_newtb-w2008s64-64
5 win7_newtb-w7u-2qxl
7 win81_cw-rx460-32
4 win1507_cw-gtx560-1507-32
5 win1507_cw-rx460-1507-32
1 win1709_cw-rx460-1709-64
39 win2009_cw-gtx560-2009-32
39 win2009_cw-gtx560-2009-64
41 win2009_cw-rx460-2009-32
41 win2009_cw-rx460-2009-64
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17414
Summary: user32/dde test crashes if +heap enabled
Product: Wine
Version: 1.1.15
Platform: PC
URL: http://test.winehq.org/data/6a1537c4b5037be5253c33021fda
3a02430533f7/wine_xp_ae-ub-810-heap/riched32:editor.html
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: enhancement
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=19484)
--> (http://bugs.winehq.org/attachment.cgi?id=19484)
backtrace in 1.1.15
wine: Unhandled page fault on read access to 0x00130000 at address 0x6045971b
(thread 0009), starting debugger...
...
=>0 0x6045971b CompareStringW+0x13b(lcid=1033, style=0, str1=0x130000, len1=0,
str2=0x6074c780, len2=-1)
[/home/austin/wine-git/dlls/kernel32/../../include/wine/unicode.h:216] in
kernel32 (0x0032f848)
1 0x6045bed4 lstrcmpW+0x64(str1=<register EDI not in topmost frame>,
str2=<register ESI not in topmost frame>)
[/home/austin/wine-git/dlls/kernel32/locale.c:2834] in kernel32 (0x0032f878)
2 0x60681d7a dde_server_wndprocW+0x3da(hwnd=0xe0028, msg=1000, wparam=458798,
lparam=<register EDI not in topmost frame>)
[/home/austin/wine-git/dlls/user32/tests/dde.c:1215] in user32_test
(0x0032f8b8)
3 0x6082337a WINPROC_wrapper+0x1a() in user32 (0x0032f8e8)
4 0x608237ca call_window_proc+0x6a(hwnd=<register EDI not in topmost frame>,
msg=<register ESI not in topmost frame>, wp=458798, lp=1204994,
result=0x32f998, arg=0x606819a0)
[/home/austin/wine-git/dlls/user32/winproc.c:458] in user32 (0x0032f928)
5 0x60828af7 WINPROC_call_window+0xf7(hwnd=<register EDI not in topmost
frame>, msg=1000, wParam=458798, lParam=1204994, result=0x32f998, unicode=1,
mapping=WMCHAR_MAP_DISPATCHMESSAGE)
[/home/austin/wine-git/dlls/user32/winproc.c:2218] in user32 (0x0032f968)
6 0x607e7ee6 DispatchMessageW+0x96(msg=<register EDI not in topmost frame>)
[/home/austin/wine-git/dlls/user32/message.c:3122] in user32 (0x0032f9a8)
7 0x607a4037 WDML_SyncWaitTransactionReply+0xe7(hConv=0x1254b8,
dwTimeout=<register ESI not in topmost frame>, pXAct=0x125508, ack=0x32fb84)
[/home/austin/wine-git/dlls/user32/dde_client.c:1069] in user32 (0x0032fa08)
8 0x607a4b21 DdeClientTransaction+0x651(pData="test dde command", cbData=17,
hConv=0x1254b8, hszItem=0xdead, wFmt=48879, wType=16464, dwTimeout=1000,
pdwResult=0x32fb84) [/home/austin/wine-git/dlls/user32/dde_client.c:1225] in
user32 (0x0032fa68)
9 0x60686158 test_dde_aw_transaction+0x638()
[/home/austin/wine-git/dlls/user32/tests/dde.c:1374] in user32_test
(0x0032fb98)
...
216 while (*s) s++;
Attached is the backtrace...I've stripped out +heap, so the output is readable,
but easily reproducible.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54089
Bug ID: 54089
Summary: user32:input - test_SendInput() sometimes gets an
unexpected 0x738 message on w1064v1709
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
test_SendInput() sometimes gets an unexpected 0x738 message on w1064v1709:
* 2022-060-14
input.c:4439: Test failed: SendInput triggered unexpected message 0x60
input.c:4457: Test failed: SendInput triggered unexpected message 0x738
* 2022-12-05
input.c:4560: Test failed: SendInput triggered unexpected message 0x60
input.c:4578: Test failed: SendInput triggered unexpected message 0x738
See https://test.winehq.org/data/patterns.html#user32:input
It's not clear why this only happens on w1064v1709.
I suspect this is a repeat of bug 48815 where this 0x738 message was being sent
to a message-only UserAdapterWindowClass window (but apparently that impacted
all Windows 10 >= 1709). If so maybe user32:input should selectively ignore
some messages like user32:win now does:
commit fa28e05cf5b0101fb046c4845391634791268200
Author: Rémi Bernon <rbernon(a)codeweavers.com>
Date: Mon Jan 31 14:18:07 2022 +0100
user32/tests: Ignore messages for UserAdapterWindowClass windows.
Wine-Bug: https://bugs.winehq.org//show_bug.cgi?id=48815
Signed-off-by: Rémi Bernon <rbernon(a)codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard(a)winehq.org>
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51473
Bug ID: 51473
Summary: user32:input Some SendInput() set LastError to
ERROR_ACCESS_DENIED on cw-rx460 19.11.3
Product: Wine
Version: 6.10
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
More specifically some cw-rx460 machines have the following failures:
https://test.winehq.org/data/patterns.html#user32:input
input.c:4410: Test failed: SendInput returned 1, error 0x5
input.c:4413: Test failed: SendInput returned 16, error 0x5
input.c:4464: Test failed: SendInput returned 16, error 0x5
These fail not because SendInput() failed, but because it modified LastError,
setting it to ERROR_ACCESS_DENIED.
This only happens on the following machines which have in common that they use
the 19.11.3 Radeon driver which is the latest version that will run on these
Windows versions:
win1507_cw-rx460-1507-32
win1507_cw-rx460-1507-64
win81_cw-rx460-32
win81_cw-rx460-64
The failure is systematic on these machines.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51471
Bug ID: 51471
Summary: user32:input receives unexpected WM_SYSTIMER messages
in test_SendInput()
Product: Wine
Version: 6.10
Hardware: x86-64
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
user32:input sometimes receives unexpected WM_SYSTIMER messages in
test_SendInput():
https://test.winehq.org/data/patterns.html#user32:input
input.c:4477: Test failed: SendInput triggered unexpected message 0x118
Notes:
* This is random: there is no machine where it happens systematically; and
different machines don't necessarily have the issue on the same day.
* This does not happen on a specific Windows version though not all seem to be
impacted either. Specifically this issue has been seen on the following
machines:
win7_newtb-w7u-2qxl
win7_newtb-w7u-de
win7_newtb-w7u-el
win7_newtb-w7u-es
win7_newtb-w7u-pt-PT
2008_newtb-w2008s64
win81_cw-rx460
win1507_cw-gtx560-1507
win1507_cw-rx460-1507
win1909_cw-gtx560-1909
win2009_cw-gtx560-2009
win2009_cw-rx460-2009
* Maybe the following article can be useful:
https://devblogs.microsoft.com/oldnewthing/20160624-00/?p=93745
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42784
Bug ID: 42784
Summary: Lost Planet dx10 demo black screen after starting new
game
Product: Wine
Version: 2.5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andras(a)sth.sze.hu
Distribution: ---
Created attachment 57802
--> https://bugs.winehq.org/attachment.cgi?id=57802
+d3d11, + d3d_shader
After starting new game or performance test in Lost Planet dx10 demo, it shows
only black screen. It tries to create a geometry shader and fails. As far as I
see, it want to use a vertex shader as geometry shader.
See log file.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54223
Bug ID: 54223
Summary: [Wine 8.0-rc2] [Severe Performance Regression]
[Unigine Heaven Benchmark 4.0] Wine DirectX11 to
OpenGL Severely Low FPS
Product: Wine
Version: 8.0-rc2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: CHECK_1234543212345(a)protonmail.com
Distribution: ---
⬤ System Information:
OS: Ubuntu 22.10
Kernel: 6.1.0
CPU: Ryzen 7 1700
GPU: XFX RX580 4GB
Window Manager: OpenBox
Compositor: No Compositor, Xorg TearFree Disabled
⬤ Issue:
Wine's DirectX11 to OpenGL was the fastest on Wine 6.0, but then got a little
slower on Wine 7.0 and got severely more slower when I tested with Wine 7.22
before I installed Wine 8.0-rc2.
⬤ Settings:
RX580 locked to 300Mhz core clock and 300Mhz memory clock
Quality: Low
Resolution: 1280x720
Fullscreen: Unchecked
⬤ Information:
Lutris was used to easily switch between Wine versions.
Scene 2 is where the screen was moving across the bridge looking at the boat.
You can switch scenes with in the Unigine Benchmark by using the "Backspace"
and "Enter" keyboard keys.
Unigine Heaven Benchmark 4.0 Results:
--------------------
Wine staging 8.0-rc2 DX11 to OpenGL
Scene 2: 41 FPS (41 FPS with WINEDEBUG=-all)
Scene 3: 24 FPS (24 FPS with WINEDEBUG=-all)
Wine staging 8.0-rc2 DX11 to Vulkan (winetricks renderer=vulkan)
Scene 2: 26 FPS (with WINEDEBUG=-all)
Scene 3: 15 FPS (with WINEDEBUG=-all)
Wine staging 8.0-rc2 DX11 to Vulkan (DXVK 2.0) (./setup_dxvk.sh install)
Scene 2: 84 FPS (with WINEDEBUG=-all)
Scene 3: 104 FPS (with WINEDEBUG=-all)
-
Wine staging 8.0-rc2 DX9 to OpenGL
Scene 2: 90 FPS (with WINEDEBUG=-all)
Scene 3: 97 FPS (with WINEDEBUG=-all)
Wine staging 8.0-rc2 DX9 to Vulkan (winetricks renderer=vulkan)
CRASHES with an error dialog when starting benchmark
Wine staging 8.0-rc2 DX9 to Vulkan (DXVK 2.0) (./setup_dxvk.sh install)
Scene 2: 57 FPS (with WINEDEBUG=-all)
Scene 3: 67 FPS (with WINEDEBUG=-all)
-
Wine staging 8.0-rc2 OpenGL to OpenGL
Scene 2: 91 FPS (with WINEDEBUG=-all)
Scene 3: 105 FPS (with WINEDEBUG=-all)
--------------------
Wine staging 7.22 DX11 to OpenGL
Same performance problem as wine 8.0-rc2
--------------------
Wine staging 7.0 DX11 to OpenGL
Scene 2: 61 FPS (74 FPS with WINEDEBUG=-all)
Scene 3: 32 FPS (61 FPS with WINEDEBUG=-all)
-
Wine staging 7.0 DX9 to OpenGL
Scene 2: 88 FPS (with WINEDEBUG=-all)
Scene 3: 83 FPS (with WINEDEBUG=-all)
--------------------
Wine staging 6.0 DX11 to OpenGL
Scene 2: 88 FPS (88 FPS with WINEDEBUG=-all)
Scene 3: 48 FPS (71 FPS with WINEDEBUG=-all)
-
Wine staging 6.0 DX9 to OpenGL
Scene 2: 88 FPS (with WINEDEBUG=-all)
Scene 3: 78 FPS (with WINEDEBUG=-all)
--------------------
Wine staging 5.1 DX11 to OpenGL
Scene 2: 71 FPS (71 FPS with WINEDEBUG=-all)
Scene 3: 48 FPS (55 FPS with WINEDEBUG=-all)
--------------------
Wine staging 4.0 DX11 to OpenGL
Scene 2: 75 FPS (84 FPS with WINEDEBUG=-all)
Scene 3: 41 FPS (64 FPS with WINEDEBUG=-all)
--------------------
Wine staging 3.0 DX11 to OpenGL
Scene 2: 48 FPS (61 FPS with WINEDEBUG=-all)
Scene 3: 27 FPS (44 FPS with WINEDEBUG=-all)
The Unigine Benchmark Launcher opened very quickly with wine 3.0
--------------------
⬤ Information:
I had "Output debugging info" "Enabled" in Lutris at first with the DX11 to
OpenGL tests and retested with "Output debugging info" "Disabled (default)" in
Lutris, which just added the "WINEDEBUG=-all" environmental variable.
The Wine 32-bit staging versions 7.0 to 3.0 was downloaded from:
https://www.playonlinux.com/wine/binaries/phoenicis/staging-linux-x86/
The Unigine Heaven Benchmark Launcher was closed after starting each benchmark
because the Unigine Heaven Benchmark Launcher was decreasing the FPS.
⬤ Conclusion:
DirectX11 to OpenGL was the fastest in Wine 6.0
Somewhere between Wine 6.0 and Wine 7.0, Wine's DirectX11 to OpenGL became a
bit more slower.
Somewhere between Wine 7.0 and Wine 7.22, Wine's DirectX11 to OpenGL became
severely more slower.
Wine's OpenGL to OpenGL is currently faster than:
DXVK (DXVK 2.0) (./setup_dxvk.sh install)
Wine's DirectX9/DirectX11 to OpenGL (renderer=gl).
Wine's DirectX9/DirectX11 to Vulkan (winetricks renderer=vulkan)
Unigine Heaven Benchmark crashes when using DirectX9 to Vulkan (winetricks
renderer=vulkan) but not with DXVK's DirectX9 to Vulkan (DXVK 2.0)
(./setup_dxvk.sh install).
Wine 3.0 Opens the Unigine Heaven Benchmark launcher very quickly. But then
with Wine 4.0 and above, the Unigine Heaven Benchmark launcher opens more
slower than Wine 3.0. I am using a HDD.
⬤ Warning if not fixed before Wine 8.0 stable gets released:
It would be good if this problem is fixed before Wine 8.0 stable get released
because Steam's Proton uses stable versions of Wine.
If this problem is not fixed by the time Wine 8.0 stable gets released and
proton updates to Wine 8.0. anyone using "PROTON_USE_WINED3D=1" on a DirectX11
Steam game can have severely Low FPS while Wine 7.0's DirectX11 to OpenGL is
only a little bit more slower than Wine 6.0's DirectX11 to OpenGL right now.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.