wine-devel

wine-devel@winehq.org

84463 discussions

Re: GetMessageTime
by Alexandre Julliard 26 Sep '01

26 Sep '01

"David Hammerton" <david(a)transgaming.com> writes: > BTW, One of the siderfects of this is: in dlls/x11drv/window.c line 1143, > GetMessageTime() is sometimes 0 (depends on the applicatoin, for example the > game Alice seems to make it return 0) - so the value sent to XSetInputFocus for > the time is too small, and hence X refuses to give the window focus. The real fix is that XSetInputFocus should not use GetMessageTime at all, this is only a temporary hack. To conform to the ICCCM the focus time should be based on the timestamp of a previous X event, and the focus should never be changed if we didn't receive an event. To do this right probably requires supporting the take focus protocol, as was discussed some time ago. -- Alexandre Julliard julliard(a)winehq.com

1 0

Getting Routing tables
by Robert Lunnon 26 Sep '01

26 Sep '01

In my pitiful attempt to hack on WINE I have come to an impasse. I have managed to find portable equivalents to get the interface name and the number of interfaces in winsock/wsock32 but I can't seem to find a portable way to get to the routing table. In Solaris (why I'm doing the hacking) there is a vague mention in the man pages of being able to get this info by reading /dev/ip but no information about how to actually do it. Can anyone provide a hint on how this can be done portably or to a multi-os implementation of netstat that might serve as an example. (Only netstat sources I have found are OS specific) Hurry because in desperation I am actually thinking of piping the output of netstat -r Thanks Bob

2 1

BeginPaint not called on WM_PAINT...
by Andreas Mohr 25 Sep '01

25 Sep '01

Hi all, the game Undying emits lots and lots of err:msg:DispatchMessageA BeginPaint not called on WM_PAINT for hwnd 20029! errors. This is because it simply does: 0806d2c8:Call user32.DispatchMessageA(406c29b0) ret=1090e313 0806d2c8:Call window proc 0x11001530 (hwnd=00020029,msg=WM_PAINT,wp=00000000,lp=00000000) 0806d2c8:Call user32.ValidateRect(00020029,00000000) ret=11107b57 0806d2c8:Ret user32.ValidateRect() retval=00000001 ret=11107b57 0806d2c8:Ret window proc 0x11001530 (hwnd=00020029,msg=WM_PAINT,wp=00000000,lp=00000000) retval=00000000 This seems to be perfectly legal in order to validate the whole window update rect (NULL) and thus prevent further WM_PAINTs. (as http://www.intrepidhero.com/articles/wgpfd_errata/part2.html hints) In short: the wine error message is erroneous in this case. The Wine check is: if (painting && wndPtr && (wndPtr->flags & WIN_NEEDS_BEGINPAINT) && wndPtr->hrgnUpdate) { ERR("BeginPaint not called on WM_PAINT for hwnd %04x!\n", msg->hwnd); So I assume that either a) some flag or so doesn't get updated properly by that ValidateRect() or b) the error message check condition is (slightly) wrong. Could someone please fix this ? This happened to #WineHQ nick Thunderbird with latest version of winex (20010824). -- Andreas Mohr Stauferstr. 6, D-71272 Renningen, Germany Tel. +49 7159 800604 http://home.nexgo.de/andi.mohr/

1 0

GetMessageTime
by David Hammerton 25 Sep '01

25 Sep '01

Hey, Durings my hunting down for why SetFocus wasnt always working, I have traced it back to a problem with GetMessageTime(). (which I have made a temporary fix for, haven't sent it to wine-patches because its not the 'right' way of fixing it) GetMessageTime() is supposed to return the time of the last message received by GetMessage(). But there are two cases where the time set (req->time) is 0 - and I can't fix it. If you turn your eyes to server/queue.c, around line 910 and 926 you will see the two times this value gets set to 0. Statically. I believe the only way to fix this is some sort of restructuring, since GetCurrentTime() (used by all other functions that set req->time) relies on a variable thats not available to the wine server. Anyone else have any suggestions? BTW, One of the siderfects of this is: in dlls/x11drv/window.c line 1143, GetMessageTime() is sometimes 0 (depends on the applicatoin, for example the game Alice seems to make it return 0) - so the value sent to XSetInputFocus for the time is too small, and hence X refuses to give the window focus. As I said i've written a small patch for this, I may send it to wine-patches if its worth it, but I really think that the source of the problem should be addressed more urgently. David. -- David Hammerton, web programmer TransGaming Technologies Inc. http://www.transgaming.com david(a)transgaming.com

1 0

NG: Wine and cyrillic input and output ?
by Dmitry Timoshkov 25 Sep '01

25 Sep '01

Hello all. This patch fixes a couple of problems with keyboard group switching reported in the news group: 1. Group switch had never worked before, if the keyboard has been switched outside of Wine. 2. I was clearly stated that Group switch is active if event->state & 0x2000, not event->state & 0x6000. Please test it on your local configurations and report back. If there will be no objections, I'll send it to wine-patches. Thanks. -- Dmitry.

2 3

GetClipboardData
by Dominik Strasser 25 Sep '01

25 Sep '01

Hello, with MS WinWord I am encountering the following problem: If there's something selected, GetClipboardData is called. In GetClipboardData, there is the line: HWND hWnd = (hWndClipWindow) ? hWndClipWindow : GetActiveWindow(); hWndClipWindow is 0, so GetActiveWindow() is called which also returns 0. I tracked this down to PERQDATA_GetActiveWnd returning 0. This leads later to "w" bening 0 which results in an X error calling XConvertSelection. It happens in all modes, desktop managed, non managed. Does anybody have any clues ? Dominik -- Dominik Strasser | Phone: +49 89 636-43691 SIEMENS AG | Fax: +49 89 636-42284 CT SE 4 | E-Mail:Dominik.Strasser@mchp.siemens.de Otto-Hahn-Ring 6 | D-81739 Muenchen | Room: 53-263

1 0

Callwave doesn't run
by Steven Walter 23 Sep '01

23 Sep '01

Is this a known problem? When I try to run the callwave install program, or the callwave program itself, I merely get: fixme:win32:PE_CreateModule Security directory ignored err:seh:start_debugger Couldn't start debugger (debugger/winedbg 134640112 24) (2) Read the Wine Developers Guide on how to set up winedbg or another debugger Is this a configuration error on my part? Either way, is there some information I need to give to get this fixed? I appreciate it. Thanks -- -Steven In a time of universal deceit, telling the truth is a revolutionary act. -- George Orwell Freedom is slavery. Ignorance is strength. War is peace. -- George Orwell

2 5

Re: wsprintf
by Alexandre Julliard 21 Sep '01

21 Sep '01

Jeremy White <jwhite(a)codeweavers.com> writes: > Okay, so it's a slow news day, and I feel like stirring up trouble. Bad boy... > I would argue that it is, in fact, counterintuitive, to have this > sort of comment solely in the change log. The only time I ever think > to look at a diff (or even the change log) is when something has broken > recently. Well, because *you* don't look at it doesn't mean it's not the right place, does it? <g> I look at the CVS history quite often, and I find that in many cases it's the best way to find out why things are done a certain way. I don't see any reason to duplicate this info inside the code itself; since we are using a source control system we might as well take advantage of it. Plus it guarantees the info is stored permanently, unlike a comment that may get moved or lost next time the code is changed. -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: wsprintf
by Alexandre Julliard 21 Sep '01

21 Sep '01

Aric Stewart <aric(a)codeweavers.com> writes: > I think this is part of what the change log is for. > > Alexandre has committed the patch, i will ask him if he wants me to > document something further and submit another patch. I added a comment in wsprintf16 to make Andreas happy. But I agree that the change log (and cvs diff) is the best way to store this kind of information. -- Alexandre Julliard julliard(a)winehq.com

3 2

Re: re-implementing real mode interrupts
by Alexandre Julliard 21 Sep '01

21 Sep '01

Mike McCormack <mike_mccormack(a)start.com.au> writes: > For example, currently calling DeviceIoControl VWIN32_DIOC_DOS_INT_13 > on the VWIN32 device calls to the real mode interrupt INT 13. It could > be re-implemented so that INT_Int13Handler does a DeviceIoControl and > the low level disk access code moved into the VWIN32 device > implemetation. VWIN32_DIOC_DOS_INT_13 is not really different from int 13, so it wouldn't make much difference either way. Much better would be to implement the higher level calls that are needed to reimplement the DOS interrupts; for instance int 13 should use the IOCTL_DISK calls of DeviceIoControl, int 25/26 should be replaced by Win32 device access (CreateFile("\\.\PHYSICALDRIVEx")+Read/WriteFile), etc. -- Alexandre Julliard julliard(a)winehq.com

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel