wine-devel June 2002

wine-devel@winehq.org

96 participants
211 discussions

Re: [Bug 628] Changed - HELP-WIndows app. fail to run
by Tony Lambregts 20 Jun '02

20 Jun '02

wqe dsf liolio wrote: > Hello, > I haven't tried the suggestion yet, but will be doing it shortly. > Please let me know how to add comments to the already reported bug. > KK. > > > [snip] > >> http://bugs.winehq.com/show_bug.cgi?id=628 > [snip] click on the link The first line of a notifcation is the link to the bug report where you can enter your comments. Tony Lambregts

1 0

Re: Notes R4 redraw problem
by Ian Pilcher 20 Jun '02

20 Jun '02

Daniel Schwarz wrote: > > Ian, do you know if this bug occurred with older builds of Wine, or can > you state that it definitely did not occur? > Dan - It's definitely a regression. I was a fairly regular user of Notes R4 under Wine until about 12-18 months ago. (I finally got broadband access and began working from home at that time. Until very recently, however, my employers VPN client was Windows-only.) This problem was definitely not present back then. I'm going to try the message tracing suggestion first. Is there a better way than '--debugmsg +message'? -- ======================================================================== Ian Pilcher pilchman(a)attbi.com ========================================================================

1 0

wine can't find regedit.exe.so when it is not on the path
by Andriy Palamarchuk 20 Jun '02

20 Jun '02

wineinstall fails because wine can't find regedit.exe.so. Obviously, the wine source directory does not exist in path of just created config file. After the wineistall failure .wine directory with config file are created. I get the same errors when I try to run regedit manually, even with using full path: $ /prj/wine/programs/regedit/regedit Could not stat /mnt/fd0 (No such file or directory), ignoring drive A: Could not stat /cdrom (No such file or directory), ignoring drive D: Warning: could not find wine config [Drive x] entry for current working directory /mnt/buf/prj/wine; starting in windows directory. Warning: /prj/wine/programs/regedit/regedit.exe.so not accessible from a configured DOS drive Warning: /prj/wine/programs/regedit/regedit.exe.so not accessible from a configured DOS drive /prj/wine/miscemu/wine: cannot find '/prj/wine/programs/regedit/regedit.exe.so' $ file /prj/wine/programs/regedit/regedit.exe.so /prj/wine/programs/regedit/regedit.exe.so: ELF 32-bit LSB shared object, Intel 80386, version 1, not stripped $ ls -l programs/regedit/regedit lrwxrwxrwx 1 apalamar apalamar 23 May 30 06:53 programs/regedit/regedit -> ../../tools/winewrapper Andriy __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com

4 5

Re: Notes R4 redraw problem
by dschwarz＠bellatlantic.net 20 Jun '02

20 Jun '02

Ian, It's been a while since I ran Notes 4 (I'm running 5.08 now) but if I recall correctly, you are able to click and drag the window pane dividers to grow or shrink them, respectively. Perhaps something in the virtual desktop switching process triggers a window resize message to the pane? Question: Once this happens, can you drag the vertical pane rightwards and redisplay the folder view? Or is it gone until you quit/restart Notes? Regards, Daniel Schwarz dschwarz(a)bellatlantic.net

3 2

RE: Configure problems on MSYS
by Steven Edwards 19 Jun '02

19 Jun '02

Heres mine.....same as yours...I dont know whats up unless my md5sum.exe is broken and MSYS is hosed. I will do a rebuild of my MSYS/Mingw tonight. cvs status configure =================================================================== File: configure Status: Up-to-date Working revision: 1.307 Repository revision: 1.307 /home/wine/wine/configure,v Sticky Tag: (none) Sticky Date: (none) Sticky Options: (none) *****CVS exited normally with code 0***** --- Paul Millar <paulm(a)astro.gla.ac.uk> wrote: > On Tue, 18 Jun 2002, Steven Edwards wrote: > > Still having the problem.....did a clean checkout. > No > > DIff > > > > here is the MD5sum > > $ md5sum.exe configure > > 3493dd32fa6c3299459c78a9c4cd4e79 *configure > > My up-to-date copy of configure has md5sum of: > 56f56ccf7d048a46fb861f4d9c327d78 configure > > Since cvs diff doesn't return anything, the only > thing I can think of is > you're working with an old tagged version. What do > you get when you do a > "cvs status" ? > > I get: > > [paulm@akela wine]$ cvs status configure > =================================================================== > File: configure Status: Up-to-date > > Working revision: 1.307 > Repository revision: 1.307 > /home/wine/wine/configure,v > Sticky Tag: (none) > Sticky Date: (none) > Sticky Options: (none) > > HTH > > Paul. > > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- > -- -- -- -- -- -- -- -- -- > Particle Physics (Theory & Experimental) Groups > Paul Millar > Department of Physics and Astronomy > paulm(a)astro.gla.ac.uk > University of Glasgow > paulm(a)physics.gla.ac.uk > Glasgow, G12 8QQ, Scotland > http://www.astro.gla.ac.uk/users/paulm > +44 (0)141 330 4717 A54C A9FC 6A77 1664 2E4E > 90E3 FFD2 704B BF0F 03E9 > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- > -- -- -- -- -- -- -- -- -- > __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com

1 0

Sorry about the attachments
by Ian Pilcher 19 Jun '02

19 Jun '02

Sorry about the attachement in that last note. I forgot about them when I added the cc to wine-devel. (Sigh) -- ======================================================================== Ian Pilcher pilchman(a)attbi.com ========================================================================

1 0

Notes R4 redraw problem
by Ian Pilcher 19 Jun '02

19 Jun '02

Dan - I'm hoping to pick your brain a little bit. I've attached a couple of screen captures that illustrate a problem I'm seeing with the Notes 4.6.7 client. Assume that I have my inbox set up as shown in "before.png". When I switch to a different virtual desktop and then switch back, the inbox will be redrawn as shown in "after.png". (The left-hand pane, which shows the views has had its width set to zero somehow.) Since I don't know either X or GDI programming very well, I'm a loss as to where to start looking. Any ideas? Thanks! -- ======================================================================== Ian Pilcher pilchman(a)attbi.com ========================================================================

1 0

Dynamically linking with a Unix library - or not
by Shachar Shemesh 19 Jun '02

19 Jun '02

Hi WINE-devel list (cross posted to Linux-IL), After a lively discussion in the Israeli Linux users mailing list, it appears that the best solution will be to give a command line (or config) option to use an external library (fribidi) for the RTL rendering. I would still implement this internally, as the extrenal library is more Unicode and less Windows complient, but that's besides the point. Adding a ./configure option to do so would probably be quite feasable (I don't know how to do it at the moment, but I am sure that will not be the disqualifying factor), but I have been quite hesitant to go that way until now, for the following reasons: A. Fribidi will have to be present during building WINE. That, in itself, is not a majour obstacle, but B. Having Fribidi present during compile will add Fribidi to the WINE dependancies. I am afraid that the consequence of B will be that no packager in his right mind will use that option. As that works in direct contradiction to the reason I entered the WINE project to begin with, I am trying to opt for a better solution. I'm seeing two possible solutions to this problem: A. If Fribidi was present during compile, check for its existance during run time. If not present, don't enable the run time option. or B. Copy (port?) Fribidi into the WINE code. It's LGPL, so the license does allow that. The consequence of B is that I will need to keep an eye on Fribidi, and keep it up to date whenever something changes there. I am very reluctant to do so. I would much rather go for the "A" solution. The problem is that I know how to do this in Windows, but not in Linux. Any help anyone can offer me? Shachar

5 10

RE: Configure problems on MSYS
by Steven Edwards 18 Jun '02

18 Jun '02

Still having the problem.....did a clean checkout. No DIff here is the MD5sum $ md5sum.exe configure 3493dd32fa6c3299459c78a9c4cd4e79 *configure __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com

1 0

What happens with...
by Medland, Bill 18 Jun '02

18 Jun '02

Can someone save me the trouble of hunting and experimenting on the following please? Our program currently is installed through installshield. It does the usual loading of newer Microsoft DLLs etc as well as of our own objects. Rather than registering them immediately it adds the registration tasks to the RunOnce part of the registry and requires a reboot. When I had a go a couple of days ago I didn't actually "do the reboot". (At the time I didn't know how our installer worked) and registered the dlls etc by hand (when I figured out that they weren't). Can anyone tell me if the "RunOnce" registry section works and if "rebooting" in the Windows sense actually reboots the wine server? Bill

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel June 2002