June 2024 - Wine-Bugs - list.winehq.org

[Bug 24063] New: World in conflict fails to start in DX10 mode
by wine-bugs＠winehq.org July 21, 2026

July 21, 2026

http://bugs.winehq.org/show_bug.cgi?id=24063 Summary: World in conflict fails to start in DX10 mode Product: Wine Version: 1.3.1 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: xvachon(a)gmail.com Created an attachment (id=30246) --> (http://bugs.winehq.org/attachment.cgi?id=30246) Log +d3d10 World in Conflict is unable to start in DX10 mode. Native dxdiagn.dll was used to avoid http://bugs.winehq.org/show_bug.cgi?id=11114 and sh winetricks d3dx10 was run too. I uploaded a +d3d10 log. If you need other debug channels, please ask. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 15

[Bug 39394] New: Panic Room by Fairlight 64K scene demo crashes on start up
by wine-bugs＠winehq.org July 21, 2026

July 21, 2026

https://bugs.winehq.org/show_bug.cgi?id=39394 Bug ID: 39394 Summary: Panic Room by Fairlight 64K scene demo crashes on start up Product: Wine Version: 1.7.52 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: t.artem(a)mailcity.com Distribution: --- Created attachment 52508 --> https://bugs.winehq.org/attachment.cgi?id=52508 panic_room_by_fairlight.zip Perhaps because of this: "d3dcompiler:compile_shader Compilation target "tx_1_0" not yet supported" fixme:win:EnumDisplayDevicesW ((null),0,0x19ff8b8,0x00000000), stub! fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT! fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table fixme:d3dcompiler:compile_shader Compilation target "tx_1_0" not yet supported wine: Unhandled page fault on read access to 0x00000000 at address 0x4073f1 (thread 0009), starting debugger... Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x004073f1). err:dbghelp_msc:pe_load_debug_directory Got a page fault while loading symbols Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:004073f1 ESP:019ff93c EBP:019ff94c EFLAGS:00010286( R- -- I S - -P- ) EAX:00000000 EBX:00000001 ECX:019ff918 EDX:00000000 ESI:00000000 EDI:01a09fe8 Stack dump: 0x019ff93c: 019ff940 00000080 00000000 00000000 0x019ff94c: 019ffdd0 0040186a 01a09fe8 000005a0 0x019ff95c: 0012cbc8 00000000 5f34766e 70736964 0x019ff96c: 6c6c642e 00000000 00000000 00000000 0x019ff97c: 00000000 00000000 00000000 00000000 0x019ff98c: 00000000 00000000 00000000 00000000 Backtrace: =>0 0x004073f1 in flt_panic_room (+0x373f1) (0x019ff94c) 1 0x0040186a in flt_panic_room (+0x31869) (0x019ffdd0) 2 0x0040157a in flt_panic_room (+0x31579) (0x019ffde4) 0x004073f1: movl 0x0(%eax),%ecx Modules: Module Address Debug info Name (76 modules) PE 3d0000- 1226000 Export flt_panic_room ELF 7872d000-7a800000 Deferred libnvidia-glcore.so.355.06 ELF 7a800000-7a8f2000 Deferred opengl32<elf> -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

3 16

[Bug 50846] New: Enterprise Architect EA.Interop.DLL generate OLE/RPC error when accessing SQL databas (MySQL ODBC driver)
by WineHQ Bugzilla July 21, 2026

July 21, 2026

https://bugs.winehq.org/show_bug.cgi?id=50846 Bug ID: 50846 Summary: Enterprise Architect EA.Interop.DLL generate OLE/RPC error when accessing SQL databas (MySQL ODBC driver) Product: Wine Version: 6.4 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: comsvcs Assignee: wine-bugs(a)winehq.org Reporter: johannes.beisswenger(a)cetitec.com CC: bunglehead(a)gmail.com Regression SHA1: c9cc098ccd7f0cdb82b8e52d00c415042c5ff717 Distribution: ArchLinux Created attachment 69656 --> https://bugs.winehq.org/attachment.cgi?id=69656 Log of failure I have a C# program which uses the EA.Interop.dll(shipped with Enterprise Architect 14) for automating Enterprise Architect which generates the following error 0140:err:ole:get_stub_manager_from_ipid not found for ipid {00000006-0124-0120-b03d-2405ea237388} 0140:err:ole:dispatch_rpc no apartment found for ipid {00000006-0124-0120-b03d-2405ea237388} 013c:err:rpc:I_RpcReceive we got fault packet with status 0x80010108 0024:fixme:ole:NdrClearOutParameters (0032F0B4,001DF0FC,0032F800): stub followed by a System.Runtime.InteropServices.COMException (0x80010108) which is (HRESULT RPC_E_DISCONNECTED). The error only appears while using a SQL database and the Exception is thrown as soon as you access any object in the SQL backed project through Enterprise Architects COM interface. Accessing the database through the Enterprise Architect GUI works as expected. I bisected the issue to #first bad commit: [c9cc098ccd7f0cdb82b8e52d00c415042c5ff717] comsvcs: Create MTA without initialization thread. commit c9cc098ccd7f0cdb82b8e52d00c415042c5ff717 Author: Nikolay Sivov <nsivov(a)codeweavers.com> Date: Mon Oct 19 12:43:04 2020 +0300 comsvcs: Create MTA without initialization thread. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=49679 Signed-off-by: Nikolay Sivov <nsivov(a)codeweavers.com> Signed-off-by: Alexandre Julliard <julliard(a)winehq.org> Reverting the commit on master (wine-6.4) fixes the issue. The prefix is a 32bit prefix with "winetricks msxml3 msxml4 msxml6 mdac28", mysql-connector-odbc-5.3.6, and Enterprise Architect 14. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 14

[Bug 56516] New: winhlp32 needs MACRO_PopupContext() to be implemented for HOMM3 map editor to show help popups
by WineHQ Bugzilla July 20, 2026

July 20, 2026

https://bugs.winehq.org/show_bug.cgi?id=56516 Bug ID: 56516 Summary: winhlp32 needs MACRO_PopupContext() to be implemented for HOMM3 map editor to show help popups Product: Wine Version: 9.5 Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: programs Assignee: wine-bugs(a)winehq.org Reporter: damjan.jov(a)gmail.com Distribution: --- As discussed on https://forum.winehq.org/viewtopic.php?t=38331 The user reports how in the "Heroes of Might and Magic III" map editor: "When you right click an object in the editor, a small window pops up with extra info on it, and this uses the old WinXP help system." "In Wine, when I call "Help" in this editor, I get the little "Failed to launch Help" error message, and after that, all help, on all (old) Windows programs, is broken until I restart Wine." It was traced to a missing implementation of MACRO_PopupContext(). -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 41605] New: Importing a .sst (Serialized certificate store) does nothing
by wine-bugs＠winehq.org July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=41605 Bug ID: 41605 Summary: Importing a .sst (Serialized certificate store) does nothing Product: Wine Version: 1.9.20 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: cryptui Assignee: wine-bugs(a)winehq.org Reporter: mterrisse(a)free.fr Distribution: --- Hello, On Windows I created a .sst file from Powershell with the cmdlet Export-Certificate. On Linux (Ubuntu 16.10, PlayOnLinux, Wine 1.9.20) I run the control panel, Internet Settings, Content / Certificates / Import. I tried to import the .sst file and it tells me "The import was successfull". But there is no new certificate in any certificate store. Thank you for your help, Michel Terrisse -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 56040] New: Antares Auto-Tune Central UI doesn't how up and then crashes
by WineHQ Bugzilla July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=56040 Bug ID: 56040 Summary: Antares Auto-Tune Central UI doesn't how up and then crashes Product: Wine Version: 8.21 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: Kirschi94(a)gmx.net Distribution: --- Created attachment 75686 --> https://bugs.winehq.org/attachment.cgi?id=75686 The backtrace the wine debugger gave me Antares Auto-Tune Central is completely unable to start, it crashes before the UI would have been loaded in. The error I suspect leads to this is: 19f4:err:virtual:virtual_setup_exception stack overflow 2000 bytes addr 0x6ffffff82160 stack 0x7ffffe100830 (0x7ffffe100000-0x7ffffe101000-0x7ffffe900000) -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 34

[Bug 56860] New: Universal Audio Connect: Plugin / App downloads fails due to missing "tar" utility
by WineHQ Bugzilla July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=56860 Bug ID: 56860 Summary: Universal Audio Connect: Plugin / App downloads fails due to missing "tar" utility Product: Wine-staging Version: 9.11 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: eoinoneill1991(a)gmail.com CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: --- Trying to debug why UA Connect didn't work on my wine installation, I think I found the source of my problem. Here's a log excerpt of the utility "UA Cloud Helper" which seems to be responsible for downloading and extracting applications. 17.33.39.205039(+2) AuthDownload(a)ERROR UAContextLowP BundleExtractionFailed('uaudio_polymax'): 'auth.download_extraction_tar_error' uaudio_polymax.lunacomponent/algo.bundle.tgz 17.33.39.205110(+70) AuthDownload(a)warn Main Auth_DownloadMgr::CancelDownload: id='uaudio_polymax' 17.33.39.219965(+14855) AuthDownload(a)ERROR Main ExtractAndStage - failed for uaudio_polymax 17.33.53.997567 AuthDownload(a)warn Main Auth_DownloadMgr::DownloadPlugin: id='uaudio_polymax', ver.='', disk path='' 17.33.55.334587 AuthDownload(a)ERROR UAContextLowP processTarExtract - 'tar' utility is not found! Process paths: "C:\windows\system32" "C:\windows" "C:\windows\system32\wbem" "C:\windows\system32\WindowsPowershell\v1.0" Basically, my understanding of this error is that the application cannot find an adequate "tar" extraction utility when checking the directories listed above. There might be a way around this if someone clever enough with wine can help direct me, but otherwise this might be a bug and could be related to issues people have had with other VST download utilities. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 4

[Bug 45237] New: Dragon Naturally Speaking 15 fails to install with customactions error
by wine-bugs＠winehq.org July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=45237 Bug ID: 45237 Summary: Dragon Naturally Speaking 15 fails to install with customactions error Product: Wine Version: 3.8 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: mscoree Assignee: wine-bugs(a)winehq.org Reporter: susancragin(a)earthlink.net Distribution: --- Created attachment 61466 --> https://bugs.winehq.org/attachment.cgi?id=61466 backtrace Dragon Naturally Speaking 15 fails to install. What I did: NS15 needs the following: WMI, dotnet452, and Windows above 2003, preferably Windows 7. First I installed Windows PowerShell core using these directions: https://docs.microsoft.com/en-us/powershell/scripting/setup/installing-powe… Then I created a 64-bit wineprefix. Installed dotnet 452 using winetricks 452 installs but then sets the wine version to either XP or 2003, neither of which will run NS15. So... winecfg Windows 7 Then the installation works. It requests that powershell be activated, and that seems to work. It recognizes that the installed dotnet is inadequate, and installs its own. And then it starts to install the program. What makes this confusing is that Natspeak 12.5 also uses dotnet452, and the same things happen, but NS12.5 installs and runs fine. This is the first error message I got Expression: [mscorlib recursive resource lookup bug] Description: Infinite recursion during resource lookup within mscorlib. This may be a bug in mscorlib, or potentially in certain extensibility points such as assembly resolve elements or CultureInfo names. Resource name: ArgumentNull_Generic -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

3 9

[Bug 55763] New: Electron projects using sudo-prompt think that permission was not granted
by WineHQ Bugzilla July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=55763 Bug ID: 55763 Summary: Electron projects using sudo-prompt think that permission was not granted Product: Wine Version: 8.17 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: skecthysites(a)gmail.com Distribution: --- Electron projects using sudo-prompt think that permission was not granted and behave as if the prompt was closed without granting permission. To reproduce: 1. Install wine-bug-demo from here: https://github.com/zurgeg/Wine-Bug/releases/tag/1.0.0 2. Extract linux-unpacked.tar.gz 3. Run wine-bug-demo 4. Note that it asks you for your user password 5. It will execute just fine once you enter your user password, then you can interrupt it 6. Install wine-bug-demo.Setup.1.0.0.exe 7. After installing, it will attempt to run, at which point it will crash with the error "User did not grant permission" -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

[Bug 45480] New: LOUDPLAY: crashes when I launch application
by wine-bugs＠winehq.org July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=45480 Bug ID: 45480 Summary: LOUDPLAY: crashes when I launch application Product: Wine Version: 3.12 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: mikhail.v.gavrilov(a)gmail.com Distribution: --- Created attachment 61835 --> https://bugs.winehq.org/attachment.cgi?id=61835 console logs $ wine --version wine-3.12 (Staging) -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 9

[Bug 33008] New: UDP listening on specific IP address does not work properly
by wine-bugs＠winehq.org July 19, 2026

July 19, 2026

http://bugs.winehq.org/show_bug.cgi?id=33008 Bug #: 33008 Summary: UDP listening on specific IP address does not work properly Product: Wine Version: 1.5.24 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: decimusmaximus(a)seznam.cz Classification: Unclassified Wine updated from 1.5.6 to 1.5.24. My app uses UDP listening on specific address (not 0.0.0.0). It is running on machine with NAT, there are two interfaces with IP A.A.A.A (public) and IP B.B.B.B (private) My app is set to listen only on one IP address, IP A.A.A.A It works properly on Wine 1.5.6. Traffic from subnet B.B.B.B is NATed to A.A.A.A interface and application running in wine receives it correctly. After update to 1.5.24 it does not work anymore. Application does not receive data from private subnet B.B.B.B, however it works properly for traffic incoming on A.A.A.A interface. Please see attached schema. results of "netstat --listening" with Wine 1.5.6 it is listening on A.A.A.A address correctly. with Wine 1.5.24 it is listening on 0.0.0.0 (obviously incorrect, socket binding is set to A.A.A.A address in application and although it is saying 0.0.0.0 app does not receive any data from B.B.B.B network) This application has to be listening only on one interface and do not mix public and private addresses. In this case it is not accessible for clients in private network, so it is critical bug. Main strange thing is, that it is listening on all addresses 0.0.0.0 although socket binding in application is set to address A.A.A.A -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 35

[Bug 56488] New: TCP socket appears to be in use but it is not
by WineHQ Bugzilla July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=56488 Bug ID: 56488 Summary: TCP socket appears to be in use but it is not Product: Wine Version: 4.0-rc2 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: bugzilla400(a)gmail.com Distribution: --- I have a .net 3.5 application that runs fine on Windows but have a problem when running on Debian. The problem is a socket binding error "address already in use". CODE: System.Net.Sockets.SocketException: Unknown error (0x2740) at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Bind(EndPoint localEP) netstat and lsof commands don't show the socket that appears to be in use, so I assume it's not really in use. Furthermore the problem only happens, and it always happen, in the following circumstance. 1. The program A.exe listens successfully on the server socket <anyip>:<port>. 2. Then it start the program B.exe and close itself (closing the socket too). 3. Program B.exe do something and then starts again A.exe. 4. A.exe try to bind the server socket but in that case it fails with the error "address already in use". 5. Restart A.exe, now the binding success. To start the new process I'm using System.Diagnostic.Process. CODE: // This is only a generic example var process = new Process() { StartInfo = new ProcessStartInfo { FileName = "cmd", Arguments = "/c /usr/bin/bash -c \"/usr/bin/sleep 5 && /usr/bin/wine path/of/process/program.exe\"", UseShellExecute = false, WorkingDirectory = "the/working/dir", } } These are the socket states after each steps (netstat): 1. LISTEN 2. not listed due to socket is closed 3. not listed due to socket is closed 4. not listed due to socket is closed <- But I have got the error 5. LISTEN I suppose that the A and B processes close properly because I don't see them in htop anymore. There seems to be something left hanging. I've found that if I don't relaunch A.exe from B, but do it manually, everything works fine. I also noticed this behavior that I wasn't expecting: - if I use socket.Accept the socket is bound to the A.exe process, - if I use socket.BeginAccept the socket is bound to the winserver32 process Clearly if I simply close the A.exe application and restart it all works fine. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 2

[Bug 49822] New: vatSys: crashes on run, unhandled Reflection.TargetInvocationException
by WineHQ Bugzilla July 19, 2026

July 19, 2026

https://bugs.winehq.org/show_bug.cgi?id=49822 Bug ID: 49822 Summary: vatSys: crashes on run, unhandled Reflection.TargetInvocationException Product: Wine Version: 5.16 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: blue(a)blu3wolf.com Distribution: --- Created attachment 68157 --> https://bugs.winehq.org/attachment.cgi?id=68157 console output from running the installed program vatSys installs normally, but crashes on run, throwing a TargetInvocationException. Can be downloaded from https://vatsys.sawbe.com/downloads/vatSysSetup.zip -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 7

[Bug 14980] New: Powerpoint 2007 fails to start
by wine-bugs＠winehq.org July 18, 2026

July 18, 2026

http://bugs.winehq.org/show_bug.cgi?id=14980 Summary: Powerpoint 2007 fails to start Product: Wine Version: 1.1.3 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dimesio(a)earthlink.net Created an attachment (id=15589) --> (http://bugs.winehq.org/attachment.cgi?id=15589) Console from 1st attempt to run Powerpoint Powerpoint 2007 fails to start in 1.1.3 on openSUSE 10.3, installed to a clean wineprefix with no overrides. The first time trying to run Powerpoint, the splash screen appears briefly, then Powerpoint just shuts down. The second time, a dialog box appears with the message "PowerPoint failed to start correctly last time. Starting PowerPoint in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Some functionality may be disabled in this mode. Do you want to start PowerPoint in safe mode?" If I click yes, the splash screen appears briefly, then Powerpoint shuts down. The third time, a dialog box appears with the message "PowerPoint failed to launch in safe mode. Do you want to start Detect and Repair?" If I click yes, it just shuts down. This cycle repeats for subsequent attempt to run the program. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 65

[Bug 52105] New: Handle to \Device\NamedPipe\ cannot be used as the RootDirectory for NtCreateNamedPipeFile
by WineHQ Bugzilla July 17, 2026

July 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=52105 Bug ID: 52105 Summary: Handle to \Device\NamedPipe\ cannot be used as the RootDirectory for NtCreateNamedPipeFile Product: Wine Version: 6.22 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: wineserver Assignee: wine-bugs(a)winehq.org Reporter: jinoh.kang.kr(a)gmail.com CC: jacek(a)codeweavers.com Regression SHA1: 2600ecd4edfdb71097105c74312f83845305a4f2 Distribution: --- Commit 2600ecd4edf (server: Use a separated object for each opened named pipe device file., 2018-10-29) split the role of the named pipe device and the named pipe file. However, in doing so, it changed the semantics of opening \Device\NamedPipe\. In particular, it is no longer possible to use a handle to \Device\NamedPipe\ as RootDirectory when creating a named pipe. This bug makes Cygwin's named pipe creation (https://github.com/cygwin/cygwin/blob/4f47e64b11ed8d47c62fa89e9b971f44b7e9a…) loop forever. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 22

[Bug 55242] New: iperf 2.0.8 will not quit with CTRL+C
by WineHQ Bugzilla July 17, 2026

July 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=55242 Bug ID: 55242 Summary: iperf 2.0.8 will not quit with CTRL+C Product: Wine Version: 8.12 Hardware: x86-64 URL: https://web.archive.org/web/20190523161058/https://ipe rf.fr/download/windows/iperf-2.0.8-win32.zip OS: Linux Status: NEW Keywords: download, source Severity: minor Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: imwellcushtymelike(a)gmail.com Distribution: Ubuntu When iperf is run in dual mode it will not exit after hitting CTRL+C. $ wine iperf.exe -c 127.0.0.1 -d -t 1 -P 5 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 007c:fixme:hid:handle_IRP_MN_QUERY_ID Unhandled type 00000005 connect failed: Connection refused ------------------------------------------------------------ connect failed: Connection refused Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ connect failed: Connection refused ------------------------------------------------------------ Client connecting to 127.0.0.1, TCP port 5001 connect failed: Connection refused TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [264] local 127.0.0.1 port 5001 connected with 127.0.0.1 port 53058 ^CWaiting for server threads to complete. Interrupt again to force quit. Pressing CTRL+C has no effect and the app has to be SIGKILLed. $ sha1sum iperf-2.0.8-win32.zip f312bf6ab7de3b1921cae7f4953aed0ce6b17afa iperf-2.0.8-win32.zip iperf -s will exit with CTRL+C though. It also doesn't produce any "connection failed" messages. Source: https://iperf.fr/download/source/iperf-2.0.8-source.tar.gz -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 55769] New: Philips Hue Sync: Application crashes on launch
by WineHQ Bugzilla July 17, 2026

July 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=55769 Bug ID: 55769 Summary: Philips Hue Sync: Application crashes on launch Product: Wine Version: 8.17 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: joni.hilger(a)yahoo.de Distribution: --- After installing the Hue Sync Desktop App it crashes immediately on launch. see error.log for my output. The window doesn't even open. The installer worked fine though. You can download it here for free: https://firmware.meethue.com/v1/download?deviceTypeId=HueSyncWin joni(a)linuxjoni03:~/Downloads> md5sum HueSyncInstaller_1.11.1.56.exe 220bea696b80d0157e9e56d49a9a4874 HueSyncInstaller_1.11.1.56.exe I started the App with the following command: ~> wine 'C:\Program Files\Hue Sync\HueSyncStarter.exe' > ~/Desktop/crash.log 2>&1 I'm using wine-8.17 (Staging) on OpenSUSE Tumbleweed 20231006 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 52959] New: Some games are rendered in square instead fullscreen
by WineHQ Bugzilla July 16, 2026

July 16, 2026

https://bugs.winehq.org/show_bug.cgi?id=52959 Bug ID: 52959 Summary: Some games are rendered in square instead fullscreen Product: Wine Version: 7.7 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: d2d Assignee: wine-bugs(a)winehq.org Reporter: slawek(a)lach.art.pl Distribution: --- Some games (like Empire Earth: Gold, Commandos: Behind Enemy Lines) do not render property. It renders only in top-left square (full game frame). Rest of screen is black. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 25

[Bug 52976] New: Daagon Map Maker on itch.io crash
by WineHQ Bugzilla July 15, 2026

July 15, 2026

https://bugs.winehq.org/show_bug.cgi?id=52976 Bug ID: 52976 Summary: Daagon Map Maker on itch.io crash Product: Wine Version: 7.0 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: registry Assignee: wine-bugs(a)winehq.org Reporter: ildaniel999(a)hotmail.com Distribution: --- Created attachment 72346 --> https://bugs.winehq.org/attachment.cgi?id=72346 wine file loads up to 100%, changes screen settings, but then crashes -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

[Bug 37125] New: PVS-Studio Error: First the execution, then the trial
by wine-bugs＠winehq.org July 15, 2026

July 15, 2026

https://bugs.winehq.org/show_bug.cgi?id=37125 Bug ID: 37125 Summary: PVS-Studio Error: First the execution, then the trial Product: Wine Version: 1.7.22 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: lukebenes(a)hotmail.com PVS-Studio identifies a First the execution, then the trial Error,V595. The 'decl' pointer was utilized before it was verified against nullptr. Check lines: 1411, 1417. parser.y 1411 ... var_t *v = decl->var; //<== expr_list_t *sizes = get_attrp(attrs, ATTR_SIZEIS); expr_list_t *lengs = get_attrp(attrs, ATTR_LENGTHIS); int sizeless; expr_t *dim; type_t **ptype; array_dims_t *arr = decl ? decl->array : NULL; //<== type_t *func_type = decl ? decl->func_type : NULL; //<== ... First the value by pointer is taken, then it is checked. Other similar fragments: V595 The 'pcbData' pointer was utilized before it was verified against nullptr. Check lines: 1859, 1862. registry.c 1859 V595 The 'token_user' pointer was utilized before it was verified against nullptr. Check lines: 206, 213. lsa.c 206 V595 The 'psp' pointer was utilized before it was verified against nullptr. Check lines: 2680, 2689. propsheet.c 2680 V595 The 'lpFindInfo' pointer was utilized before it was verified against nullptr. Check lines: 6285, 6289. listview.c 6285 V595 The 'compiland' pointer was utilized before it was verified against nullptr. Check lines: 287, 294. symbol.c 287 V595 The 'graphics' pointer was utilized before it was verified against nullptr. Check lines: 2096, 2112. graphics.c 2096 V595 The 'current' pointer was utilized before it was verified against nullptr. Check lines: 240, 251. request.c 240 details on the V595 error here: http://www.viva64.com/en/d/0205/ -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 37117] New: PVS-Studio Error: Shifting a negative number
by wine-bugs＠winehq.org July 15, 2026

July 15, 2026

https://bugs.winehq.org/show_bug.cgi?id=37117 Bug ID: 37117 Summary: PVS-Studio Error: Shifting a negative number Product: Wine Version: 1.7.22 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: lukebenes(a)hotmail.com PVS-Studio Error: V610 Undefined behavior. Check the shift operator '<<. The left operand '(LONGLONG) - 1' is negative. propvar.c 127 ... if (*res >= ((LONGLONG)1 << (dest_bits-1)) || *res < ((LONGLONG)-1 << (dest_bits-1))) return HRESULT_FROM_WIN32(ERROR_ARITHMETIC_OVERFLOW); ... The LONGLONG type is declared as 'typedef signed __int64 LONGLONG;', i.e. it is a signed type. According to the new standard, shifting negative numbers leads to undefined or unspecified behavior. To find out why such code still may work and how to fix it best, see the article Wade not in unknown waters - part three. details on the V610 error here: http://www.viva64.com/en/d/0225/ -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 52092] New: game pass
by WineHQ Bugzilla July 14, 2026

July 14, 2026

https://bugs.winehq.org/show_bug.cgi?id=52092 Bug ID: 52092 Summary: game pass Product: Wine Version: 6.21 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntdll Assignee: wine-bugs(a)winehq.org Reporter: master.zion(a)gmail.com Distribution: --- Hi everyone... it seems it is not possible to install the xbox application for PC using wine. It would be useful to play Windows games from xbox game pass, and it will be very useful on Steam deck. it fails during the installation startup. ------ Unhandled Exception: 0024:fixme:ntdll:EtwEventRegister ({8e9f5090-2d75-4d03-8a81-e5afbf85daf1}, 05E202EE, 00000000, 01EA96F4) stub. Unhandled Exception: System.IO.FileNotFoundException: Could not load file or assembly 'Windows.Foundation.UniversalApiContract, Version=7.0.0.0, Culture=neutral, PublicKeyToken=null, ContentType=WindowsRunt ime' or one of its dependencies. Module not found. at XboxInstaller.App..ctor() at XboxInstaller.App.Main() ------ https://www.xbox.com/en-IN/apps/xbox-app-for-pc -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 26

[Bug 18288] New: Quicktime 3 creates unusual menus / string value error
by wine-bugs＠winehq.org July 13, 2026

July 13, 2026

http://bugs.winehq.org/show_bug.cgi?id=18288 Summary: Quicktime 3 creates unusual menus / string value error Product: Wine Version: 1.1.20 Platform: PC URL: http://www.oldversion.com/download/quicktime302.exe OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk Created an attachment (id=20819) --> (http://bugs.winehq.org/attachment.cgi?id=20819) Wine 1.1.20 +menubuilder The Quicktime 3.0.2 installer reports an error when attempting to create program groups and icons: "String variable is not large enough for string. Check the string declarations. Error 401." The installer then creates an unusual directory structure: ls -aR /home/test/.local/share/applications/wine/Programs /home/test/.local/share/applications/wine/Programs: . .. QuickTime QuickTime 3.0 /home/test/.local/share/applications/wine/Programs/QuickTime: . .. MoviePlayer.desktop PictureViewer.desktop ReadMe.desktop UnInstall QuickTime 3.0.desktop /home/test/.local/share/applications/wine/Programs/QuickTime 3.0: . .. .desktop Setup completes successfully. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 20

[Bug 39068] New: Santander bank security module crashes during core module installation
by wine-bugs＠winehq.org July 13, 2026

July 13, 2026

https://bugs.winehq.org/show_bug.cgi?id=39068 Bug ID: 39068 Summary: Santander bank security module crashes during core module installation Product: Wine Version: 1.7.49 Hardware: x86 URL: https://wwws.santandernet.com.br/mps/bin/gbpluginabnse tup.exe OS: Linux Status: NEW Keywords: download, Installer Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: 00cpxxx(a)gmail.com Distribution: Debian Created attachment 52045 --> https://bugs.winehq.org/attachment.cgi?id=52045 log+crash Follow up from bug 33430. After applying the patch from https://bugs.winehq.org/attachment.cgi?id=52041 the app installer still crashes, the last line from the log is: 0009:fixme:urlmon:SecManagerImpl_GetZoneMappings Default action is not implemented wine: Unhandled page fault on read access to 0x00000000 at address 0x433660 (thread 0009), starting debugger... It could suggest that the application does not like the stub return from GetZoneMappings. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 14

[Bug 34694] New: Adobe reader 11.0.4 empty search results in PDF portfolios
by wine-bugs＠winehq.org July 13, 2026

July 13, 2026

http://bugs.winehq.org/show_bug.cgi?id=34694 Bug #: 34694 Summary: Adobe reader 11.0.4 empty search results in PDF portfolios Product: Wine Version: 1.7.3 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: nick.payne(a)internode.on.net Classification: Unclassified Created attachment 46244 --> http://bugs.winehq.org/attachment.cgi?id=46244 Expanded search results under Wine Reader 11.0.4 with flash support for viewing PDF portfolios installed on Linux Mint 15 amd64. Download of Adobe Reader XI 11.0.4: ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.04/en_US/AdbeRdr11004_en… Download of Flash player/plugins: http://www.adobe.com/support/flashplayer/downloads.html#fp11 Some example portfolio for testing: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/feature-detai… For installation you need to work around bug 12501 -> 'winetricks mspatcha' After installation you need to work around bug 25834 (disable protected mode), bug 16144 (work around with 'winetricks atmlib'), and richedit component bug with 'winetricks riched20'. You can now search a portfolio and get back a search window showing hits in the various PDF files in the portfolio, but the results are unusable because the expanded results window doesn't contain any text for the search hits and they can't be selected to jump to the relevant location in the PDF file where the hit occurred. See the two uploaded screen dumps, showing the expanded results window from performing the same search on a PDF portfolio using firstly Reader 11.0.4 under wine and then Reader 11.0.4 running on winxp. At the point where I expand the search results (and find they're all empty), I see the following on the console output: fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub! fixme:ole:RemUnknown_QueryInterface No interface for iid {00000019-0000-0000-c000-000000000046} fixme:qmgr:BITS_IBackgroundCopyJob_GetPriority Not implemented fixme:qmgr:BITS_IBackgroundCopyJob_SetPriority (0x59750,0x00000001) stub fixme:qmgr:BITS_IBackgroundCopyJob_GetPriority Not implemented fixme:qmgr:BITS_IBackgroundCopyJob_AddFile Check for valid filenames and supported protocols fixme:wininet:InternetLockRequestFile STUB fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 6