http://bugs.winehq.org/show_bug.cgi?id=19765
Summary: Bricscad has slow performance
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ricardoperry(a)gmail.com
Created an attachment (id=23142)
--> (http://bugs.winehq.org/attachment.cgi?id=23142)
Bricscad Option menu
When doing realtime pan and zoom with large drawings it takes too long to
refresh the screen.
Probably related to WINGDI driver.
In other Intellicad software ZWCAD the realtime pan and zoom works ok.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15320
Summary: GammonEmpire closing playing window.
Product: Wine
Version: 1.1.4
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: zetagi(a)yahoo.com
GammonEmpire software when you close playing window program close whole
program.
Normally you will go to main window
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18261
Summary: S103 animation problem
Product: Wine
Version: 1.1.20
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20784)
--> (http://bugs.winehq.org/attachment.cgi?id=20784)
Wine 1.1.20 +loaddll
S103 is an Open University application.
Part of the application plays embedded animations with a voice-over.
Under Windows XP, these play fine. Under Wine, an error message is shown
stating: "Could not create or use window."
Under Windows XP a small window opens title "Profiling Display" the first time
it is run, and then the animation continues.
Under Wine, with +loaddll, this is output:
fixme:mciavi:MCIAVI_mciStatus Unknown command 0000400E !
fixme:mciavi:MCIAVI_mciSet MCI_SET_ON: seek_exactly
fixme:mciavi:MCIAVI_mciRealize (0001, 00020002, 0x13b9a86) : stub
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\iccvid.dll"
: builtin
trace:loaddll:free_modref Unloaded module
L"C:\\windows\\system32\\mciavi32.dll" : builtin
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\msvfw32.dll"
: builtin
trace:loaddll:MODULE_LoadModule16 Loaded module "TB50CMP.DLL" : native
Upon clicking on the stop button for the animation, a new window is shown
stating: "The media resource is not open. Try using "mmOpen" before this
command."
The application uses the Toolbook 5.0 Runtime.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20377
Summary: MacOS LANG=xyz wine winecfg does not switch
language/locale
Product: Wine
Version: 1.1.31
Platform: PC
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
Hi,
on my Mac, LANG=C or LANG=fr_FR.UTF-8 wine winecfg has no effect at all, unlike
a Linux machine. winecfg's texts are always displayed in German.
locale -a lists a lot of locales. "LANG=C ls -l" reacts instantly.
OTOH, going to the Mac system preferences and moving French or English upfront
manages to switch the language in winecfg (and Terminal.app and others), the
next time it's started.
For the purpose of Wine, I believe the local LANG setting should be obeyed, not
the desktop session setting.
Note that I have no idea how to start Wine outside of a Terminal.app context
(no Wine[Helper].app here). So LANG is always set when I start Wine in the
shell.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18332
Summary: Window background not drawn correctly.
Product: Wine
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P5
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bstein(a)unm.edu
Created an attachment (id=20875)
--> (http://bugs.winehq.org/attachment.cgi?id=20875)
Screenshot of the problem.
With Kaleidagraph 4.0 certain windows are drawn funny. The normally grey
background is drawn with whatever is behind the window when it is first opened.
Moving it around doesn't change the background. Nothing shows up with winedbg
or on the console, but I have little to no experience with wine debugging.
Attached is screenshot of the problem.
Please let me know what other debugging information might help!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18054
Summary: Very big fps drop when recording in fraps
Product: Wine
Version: 1.1.19
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: puciek(a)gmail.com
Recently i've tried to record ingame video using fraps via wine and i've
encountered very huge fps drop (from 105 to 15) which is definitly caused by
some sort of bug because on windows box this drop is nowhere so drastic.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19996
Summary: XCardIssuer fails to run properly
Product: Wine
Version: 1.1.29
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: taupter(a)gmail.com
Created an attachment (id=23531)
--> (http://bugs.winehq.org/attachment.cgi?id=23531)
Error messages, stack dump, register dump and backtrace
When I run the progam, a window pops up with the following message:
Program Error
The program CardIssuer.exe has encountered a serious problem and needs to
close. We are sorry for the inconvenience.
This can be caused by a problem in the program or a deficiency in Wine. You may
want to check http://appdb.winehq.org for tips about running this application.
If this problem is not present under Windows and has not been reported yet, you
can report it at http://bugs.winehq.org
and then another window:
Application Error
Exception EExternalException in module ntdll.dll at 0002C538.
External exception C0000025.
Platfort it ran fine: Windows XP SP2 32bits.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15321
Summary: Yugioh Virtual Desktop 9.0 RC1 crashes upon loading
Product: Wine
Version: 1.1.4
Platform: HP
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thundernyannyan(a)hotmail.com
Created an attachment (id=16154)
--> (http://bugs.winehq.org/attachment.cgi?id=16154)
Terminal Output log
This program creates a "Run-time error '445': Object doesn't support this
action" as soon as the interface loads. The download comes with several .dll
and .ocx files, most of which do not seem to come pre-packaged with Wine 1.1.4
(the only one I can remember which wasn't new was oleaut32.dll, but there may
have been one or two others).
I've tried moving these files into Wine's system32 folder and running the
program both with and without having those files set as Native Then Builtin.
The only difference I found was that setting oleaut32.dll as Native Then
Builtin causes the error message to change to "Run-time error '-2147467259
(80004005)': Automation error." Whether this means the problem is with the
oleaut.dll file itself, a combination of files, or something else entirely, I
have no idea.
Here are the links to download the required files:
YVD 9.0 Beta 12 (contains all the base files necessary to run):
http://www.xerocreative.com/yvd9prefinal.zip
YVD 9.0 RC1 Test Build 5 (contains two files which must be used in place of the
Beta 12 files): http://xerocreative.com/YVD9rc1b5.zip
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21491
Summary: pcmet: FTP-Transfer fails with error "9" regression
Product: Wine
Version: 1.1.34
Platform: x86
URL: http://appdb.winehq.org/objectManager.php?sClass=versi
on&iId=16825
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: oleaut32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: normandy(a)web.de
CC: robertshearman(a)gmail.com
Sorry for posting this so late,
but since wine .34 pc_met fails to download data from the internet. wine .33
worked perfectly. I just did a quick regression test and this came up:
---
99d9983b6146e4b6bc99c2ef1b602ec805dbc96a is first bad commit
commit 99d9983b6146e4b6bc99c2ef1b602ec805dbc96a
Author: Rob Shearman <robertshearman(a)gmail.com>
Date: Wed Nov 18 00:17:46 2009 +0000
oleaut32: Fix memory leaks in ITypeInfo_fnInvoke.
:040000 040000 ed7b8443ebc047540b4ef52c51c04c396160492b
5941942ae303c760ba6cfe45f89e2b90dbd79128 M dlls
---
The application fails with a short MessageBox: "An error occured while
transferring data! [GETFILE]\nSubscript out of range\n9Continue anyway?
[YES]/[NO]" (translated from german)
This bug cannot be reproduced using the demo, as recent weather data can only
be downloaded using username/password after payment. Sorry.
Thank you, John
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14671
Summary: HCA fails to communicate with LynX-10 module through
COM-1, gives error pop-up
Product: Wine
Version: 1.1.2
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Cobra176(a)chartermi.net
Created an attachment (id=15126)
--> (http://bugs.winehq.org/attachment.cgi?id=15126)
Screenshot of the error dialog
Marrick Ltd. Home Control Assistant (HCA) fails to communicate with a LynX-10
module connected to COM-1, returns an error pop-up window [see image
attachment]
This error occurs when in hardware setup, clicking the Test button for the
device. The device is specified manually-there is nothing implying that there
was any actual communication with the device. Activity lights did not come on
with the LynX-10. The software cannot perform its task without communicating
with the interface.
This does not occur within native Win98SE. The device is indeed connected to
serial port 1 and is powered up.
Background info:
LynX-10 is an X10 interface used for home automation for sending digital
messages through AC lines to turn various devices on and off, dim lights, etc.
with computer control. It connects using a serial port, is powered off the AC
and has an activity light for serial exchanges.
http://www.hcatech.com/
The software is designed to interface with a variety of interfaces; each
interface needs specification as to what COM port it is attached to. Next to
each interface on the setup dialog is a Test button. When this Test button is
clicked the dialog described above occurs.
The attached log starts from startup of the program, which runs quite smoothly
until the explicitly-marked parts.
Machine info:
kubuntu 8.4, up-to-date (as of Jul 27 2008)
2 serial ports, 1 plugged into LynX-10, second is free.
No special serial port software installed on linux end.
Windows version mode is "use default"
The following DLLs are overridden with no benefit:
comcat
comctl32
comdlg32
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.