http://bugs.winehq.org/show_bug.cgi?id=27594
Summary: Indiana Jones and the emperor's tomb crashes
Product: Wine
Version: 1.3.23
Platform: x86
URL: http://www.jeuxvideo.com/telecharger/jeux-et-demos/000
05589-indiana-jones-et-le-tombeau-de-l-empereur-pc.htm
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeremielapuree(a)yahoo.fr
CC: julliard(a)winehq.org
Indiana Jones and the tomb of emperor crash. It is a regression caused by
commit a8d8e4a3679d7b81466e1e010add25948bd11c8a
THe attached console output is in 2 parts since it is 1.8M after compressed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38309
Bug ID: 38309
Summary: Rufus theme broken, does not see files or USB devices
(or anything), crashes upon use - Fatal Error.
Product: Wine
Version: 1.7.38
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jeff.mount420(a)gmail.com
Distribution: ---
Created attachment 51148
--> https://bugs.winehq.org/attachment.cgi?id=51148
WINE backtrace log
Linux Mint 17 64 Cinnamon
I tried both versions repeatedly.
WINE Version: 1:1.7.38-0ubuntu1
WINE Version: 1:1.6.2
These are fresh installs, with Rufus being my only use for WINE. Before these
installs, I tested WINE with a few other Apps and most seemed to work properly.
I then removed and purged WINE and Rufus before each install.
I tried the last three versions of Rufus. All would load, but with theme
glitches and lack of USB and directory/folder/file presence, the latter being
caused by the theme glitch or lack of connectivity. When an active button is
used to search for a file, a fatal error message comes up, then it closes.
I have attached the report.
I am only a low-intermediate Linux compiler, so I am not sure of the exact
problem, but I did notice sel=0067 (32-bit) ends at 0 (null).
I am not sure what to do with this...
Thanks
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15359
Summary: wcmd: msysgit does not work
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kirr(a)landau.phys.spbu.ru
I'm trying to use msysgit from here
http://msysgit.googlecode.com/files/Git-1.6.0.2-preview20080921.exe
it installs just fine, but git itself does not run:
Z:\home\kirr\tmp\trashme\msysgit>git
fixme:cmd:WCMD_for /F needs to handle options
Syntax error
File not found
it seems it wants that /F to be implemented.
Thanks beforehand.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39848
Bug ID: 39848
Summary: Can't launch Victoria 2 from steam
Product: Wine
Version: 1.8
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: litimetal(a)gmail.com
Distribution: ---
1. winetricks steam
2. cd "~/.wine/drive_c/Program Files/Steam"
wine Steam
3. Log in, download Victoria 2
4. Run Victoria 2, it just crashed before meeting Bug 35163
If I type
cd "~/.wine/drive_c/Program Files/Steam/steamapps/common/Victoria 2"
Then run wine v2game.exe, the game will launch, then hit bug 35163
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16734
Summary: get_ptrace_tid defined but not used on OpenBSD
Product: Wine
Version: 1.1.12
Platform: PC
OS/Version: OpenBSD
Status: NEW
Keywords: patch, source
Severity: trivial
Priority: P2
Component: build-env
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
ccache gcc -c -I. -I. -I../include -I../include -D__WINESRC__ -Wall -pipe
-fno-strict-aliasing -Wwrite-strings -Wpointer-arith -I/usr/local/include -g
-O2 -o ptrace.o ptrace.c
ptrace.c:174: warning: `get_ptrace_tid' defined but not used
There's an '#ifdef linux' on the same code a few lines earlier (in
get_ptrace_tid), which fixes compile here as well:
diff --git a/server/ptrace.c b/server/ptrace.c
index b446de9..92b7db5 100644
--- a/server/ptrace.c
+++ b/server/ptrace.c
@@ -172,7 +172,9 @@ static int get_ptrace_pid( struct thread *thread )
/* return the Unix tid to use in ptrace calls for a given thread */
static int get_ptrace_tid( struct thread *thread )
{
+#ifdef linux
if (thread->unix_tid != -1) return thread->unix_tid;
+#endif
return thread->unix_pid;
}
but I'm not sure if that's right or not. Comments welcome.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33408
Bug #: 33408
Summary: CAJViewer 7.2 needs MDAC while installing
Product: Wine
Version: 1.5.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: litimetal(a)gmail.com
Classification: Unclassified
0. download and type $wine 'CAJViewer 7.2.self.exe'
1. just click Next
2. Before the installation finished, the installer reportered that MDAC 2.8 is
needed, but I closed that dialog, and the installation finished successfully.
3. I don't know if it has more influnce than an annoying dialog.
winetricks mdac28 to workaround it.
By the way, this bug doesn't block bug 33404
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30222
Bug #: 30222
Summary: Symantec VIP Access can not be activated - take 2
Product: Wine
Version: 1.5.0
Platform: Other
URL: http://www.symantec.com/products/trialware.jsp?pcid=pc
at_info_risk_comp&pvid=vip_1
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winhttp
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: robert.munteanu(a)gmail.com
Classification: Unclassified
As a follow-up to bug #29891 , after installing Symantec VIP Access the user is
required to accept a license agreement and activate the program. The activation
is unsuccesful and therefore the program can not be used.
Please note that the 'activation' does not refer to copy protection mechanisms,
but rather to connecting to a server using HTTP and obtaining an initial unique
credential ID.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33190
Bug #: 33190
Summary: Font display problem using text and dc rotation
Product: Wine
Version: 1.5.25
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ralf.habacker(a)freenet.de
Classification: Unclassified
We recognized an gdi text display issue using the application Gausz
http://appdb.winehq.org/objectManager.php?sClass=application&iId=13649.
The problem appears when gdi text is drawn with font rotation *and* display
context rotation.
The problem do not appear when either font rotation or display context rotation
is zero.
The application uses CreateIndirectFont to set a fixed size font with optional
set rotation and draws the text with TextOut(). The display context rotation
has been set with SetWorldTransform().
We tried to find a test case application, but where not able to reproduce the
problem outside the application. We also tried to debug into wine's code based,
but got lost by the details.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41996
Bug ID: 41996
Summary: Hitman: Blood Money demo has color issues with
built-in d3dx9_27
Product: Wine
Version: 2.0-rc1
Hardware: x86-64
URL: http://www.gamewatcher.com/downloads/hitman-blood-mone
y-download/hitman-blood-money-demo
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 56417
--> https://bugs.winehq.org/attachment.cgi?id=56417
d3dx
fixme:d3dx:d3dx9_base_effect_get_desc partial stub!
fixme:d3dx:get_format_info Unknown format 0x3c (as FOURCC "<\x00\x00\x00").
wine-2.0-rc1-29-g3c6cbc2
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30919
Bug #: 30919
Summary: [.net 2.0] ListBox items should not display any
newline characters
Product: Wine
Version: 1.5.5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: danieleds0(a)gmail.com
Classification: Unclassified
Created attachment 40550
--> http://bugs.winehq.org/attachment.cgi?id=40550
Expected behavior vs actual behavior
In a .net application, if you add an item to a ListBox, newline characters are
shown (in windows, they're hidden). Look at the attached image to see the
differences.
This is the code used to reproduce the problem (VB.NET):
ListBox1.Items.Add("aaa" & "|" & vbNewLine & "bbb" & "|" & vbNewLine & "ccc")
I suspect this problem is not limited to .net, but maybe is at some lower
level.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35056
Bug #: 35056
Summary: Pro⁄Engineer Wildfire 5.0: Fails to start installation
Product: Wine
Version: 1.7.7
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Classification: Unclassified
Created attachment 46746
--> http://bugs.winehq.org/attachment.cgi?id=46746
WINEDEBUG=+relay,+seh,+tid on wine-1.7.7-107-g61358d0
Steps to reproduce:
1) remove ~/.wine
2) wine setup.exe
Behaviour:
Nothing.
Expected behaviour:
Something.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32791
Bug #: 32791
Summary: Fail to receive stdout from .NET application.
Product: Wine
Version: 1.5.22
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leslie_alistair(a)hotmail.com
Classification: Unclassified
Created attachment 43302
--> http://bugs.winehq.org/attachment.cgi?id=43302
Source and exe of Sample application.
Unzip the attached Program.
Run the CreateProcess.exe in the Debug directory.
I am expecting to see the "passed" message, but instead see "failed".
CreateProcess.exe create a process of MyAssembly.exe and is expecting to
receive data via the stdin/out. However this fails when using mono.
If you run MyAssembly.exe by itself, the text appears on the console.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31905
Bug #: 31905
Summary: Windows from virtual desktop are able to steal focus
from external windows
Product: Wine
Version: 1.5.14
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: phoenix(a)mail.ru
Classification: Unclassified
I'm not sure if it is by design or not, but here's situation:
I launch dota 2 using following command:
WINEPREFIX=~/.wine_dota2/ ./wine explorer /desktop=dota2,1920x1080 "C:\Program
Files\Steam\Steam.exe" -applaunch 570
As steam app, it launches steam first, then launches dota within it. Process is
quite lengthy, so i switch focus to another window (e.g. browser) when virtual
desktop is initialized.
During steam load process, focus is stolen from browser. It remains as top-most
window, but 'inactive'. And, e.g. to continue typing something in the browser i
have to bring focus back. Few moments later (1-2), wine's window becomes
top-most, even if i click inactive browser window to restore focus.
During steam shutdown process, it steals focus again, but this time without
bringing virtual desktop to top.
Steam is just example: this occurs with numerous other apps, in some cases it
may happen even multiple times during launch process of some complex
application. For me as user, it is extremely annoying - i always thought that
virtual desktop is a way to avoid integration between wine and OS WM, with its
own tray and window management, and that virtual desktop should present itself
as normal OS window.
I'm using Debian Wheezy amd64, Gnome 3, NVIDIA binary driver, latest Wine from
git.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13637
Summary: MechCommander Gold: Two keypresses simultaneously are
not recognized
Product: Wine
Version: 1.0-rc3
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: liquitsnake(a)gmx.net
Under Windows it was possible to scroll diagonally using two arrow keys at the
same time. This is not possible under Wine. The second keypress overrides the
first one.
e.g. I want to scroll into the upper left corner. I press left, it scrolls
left. I keep left pressed and press up -> It only scolls upwards.
Modifier keys like Ctrl are handled properly.
I don't think the game is based on dinput. At least, I don't get anything when
I enable the dinput debug channel.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21599
Summary: ACDSee Pro Photo Manager 3 : Not running
Product: WineHQ Apps Database
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: appdb-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: igor.demyanov(a)gmail.com
Created an attachment (id=26059)
--> (http://bugs.winehq.org/attachment.cgi?id=26059)
WINEDEBUG=+all
Application still exit.
Trial version http://downloads.acdsystems.com/en/acdseepro.exe
err:ole:CoUninitialize Mismatched CoUninitialize
Wine 1.1.37
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37383
Bug ID: 37383
Summary: Office 2010 - Submenus invisible on GNOME 3.14
Product: Wine
Version: 1.7.28
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: anmeldung(a)r-system.de
## summary
Submenus are invisible.
If I was running GNOME 3.12 everything was fine with OFFICE 2010.
Now I've upgraded to GNOME 3.14.0 with:
i | gnome-shell | Paket | 3.14.0-308.1 | x86_64 | GNOME
i | xorg-x11 | Paket | 7.6_1-16.1 | noarch | repo-oss
with Vendor NVIDIA Driver NVIDIA-Linux-x86_64-340.46
sidenote:
this issue is not related to playonlinux only. It also appears in crossover. So
the question is, if it is a wine or gnome problem?
I can reproduce this on T500 Lenovo with Intel Chipset and on Desktop Computer
with NVIDIA GraphicsCard. So it seems not to be a display driver problem.
## actual behaviour
If I want to see a submenu in any Office 2010 application with either "right
click" or from "ribbon menu" they do not appear in any case. But if you call a
menu with richt click and imagine it was there and use the keyboard to select
an item from that invisible menu -the actions itself are working.
If I switch to another desktop environment the menus do appear.
See videolinks:
xfe -> [https://vid.me/AaY]
gnome 3.14 [https://vid.me/GU7]
## expected behaviour
see the menu in any case.
## additional info
I'm not sure where to put this issue. If this is correct here on pol or if this
should be posted to GNOME Bugtracker or it should be posted to the wine
bugtracker.
As this is not quite clear, i'll post it cross and reference each.
Any hints are welcome.
## confirmation
it would be very good if anybody could confirm this
## crossreference
*
http://www.playonlinux.com/en/topic-12497-Office_2010__Submenus_invisible_o…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41268
Bug ID: 41268
Summary: Songr 1 installation fails
Product: Wine
Version: 1.9.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 55568
--> https://bugs.winehq.org/attachment.cgi?id=55568
Console output during installation
Hello everyone,
I am having problems installing an application on wine 1.9.17 - Download URL is
at:
http://www.xamasoft.com/songr/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25974
Summary: AutoCAD 2009 LT: acadlt.msi doesn't start installer
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=33110)
--> (http://bugs.winehq.org/attachment.cgi?id=33110)
WINEDEBUG=+msi on wine-1.3.12-272-g2d6b748
Steps to reproduce:
1) remove ~/.wine
2) wine start /x86/acadlt.msi
Behaviour:
Fatal error
"Installation ended prematurely because of an error"
Expected behaviour:
Installer's window.
Terminal output:
fixme:exec:SHELL_execute flags ignored: 0x00000100
fixme:storage:create_storagefile Storage share mode not implemented.
fixme:msi:check_assembly_installed we should probably check the manifest file
here
err:msi:ITERATE_Actions Execution halted, action L"SetupWizard" returned 1603
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15346
Summary: Winamp disappears when you move it's location
Product: Wine
Version: 1.1.5
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: homerhomer(a)gmail.com
Created an attachment (id=16178)
--> (http://bugs.winehq.org/attachment.cgi?id=16178)
DwmSetWindowAttribute error
Sort of a silly bug, basically once winamp is up and running, if you click on
the title bar and move it around winamp disappears. To make sure that the bug
happens make sure to swirl it around a couple of times. ( A Swirly if you will
)
Attached
I also noticed this when running winamp manually at startup. This may be
related. but then I move winamp and it disappears I don't get any more error
messages. So I'm not sure. I appreciate the good work
Thank you
I'm running Ubuntu 8.04, Wine 1.1.5, AMD64
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36447
Bug ID: 36447
Summary: Test for exe date fails - Avanti
Product: Wine
Version: 1.7.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: marawuti0(a)gmail.com
Avanti [http://www.avanti.arrozcru.org/] tests the ffmpeg.exe for a minimum
date. This fails under Wine but the identical downloaded files work fine under
Windoz.
I was using Avanti-078.7z (released 06-05-2014) [May 6] and
ffmpeg from http://ffmpeg.zeranoe.com/builds/ Version: git-4cdea92
(2014-05-07)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16367
Summary: multimedia keys not available for wine applications
Product: Wine
Version: unspecified
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: marc.menghin(a)gmail.com
Some applications like Winamp use global hotkeys. Hotkeys work fine in Gnome
for me but do not work in Winamp (Can't set them in the Winamp config). Other
keys work fine there.
It looks like multimedia keys are not forwarded to a application running with
Wine.
Ubuntu 8.10, Wine 1.1.10 (Winamp 5.541)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10648
Summary: Async WSASend does not send all bytes.
Product: Wine
Version: 0.9.5.
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: test
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: marius(a)scimore.com
On Server sending 1500 bytes with non-blocked WSASend and 2 WSABUFFERS will
transfer only 1452 bytes. On client WSARecv called again will be blocked and
does not receive the the remaining bytes.
The completion port receives event on transfered 1452 bytes, and there is no
more followed events on transfered the last 8 bytes.
OS: Ubuntu 7.10
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12532
Summary: Autodesk TrueView fails to install
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://usa.autodesk.com/adsk/servlet/index?id=6703438&si
teID=123112
OS/Version: Linux
Status: UNCONFIRMED
Keywords: download, Installer
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xerox_xerox2000(a)yahoo.co.uk
Hi, a user submitted this new app into appdb with garbage test results, so i
gave it a try as well. That user reported a problem that the disk was full, but
i can't reproduce that, it fails differently here.
To run into this bug you need Alex Villacis' patch here:
http://article.gmane.org/gmane.comp.emulators.wine.patches/49916
hopefully that patch will make it into git monday.
after applying that patch the intaller failed with a message 'Call not
implemented'
The problem seems to be:
fixme:MsiDatabaseGenerateTransformW
By just returning ERROR_SUCCESS, it ran into two other unimplemnted functions:
MsiQueryFeatureStateFromDescriptorA and MsiCreateTransformSummaryInfoW
By stubbing these out with ERROR_SUCCESS the installer claimed to be
successfull (but i guess that's doubtful).
Anyway , this all shows that these three functions need to be implemented to
get this installer finish, and that's where I created this bug for.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37263
Bug ID: 37263
Summary: World Of Warcraft: stuck keys
Product: Wine
Version: 1.7.25
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: brian(a)infinityplusb.com
I'm running WoW 5.4.8.
At random intervals keys appear "stuck", even though they are not physically
stuck. I can really only notice the ones where the "stuck key" is for moving
(e,d,s,f) cause the character keeps strafing or running. Sometimes repressing
these keys causes the key to unstick, but that's maybe a 20-25% success rate.
Maybe less.
I'm new to this bug-filing thing so I'll try replicate the issue.
I'm not sure this issue is specific to Warcraft, but it's the only game I play.
There are other google tracks related to this, but they seem quite old
(pre-2008).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24684
Summary: SMP problems with Source games
Product: Wine
Version: 1.3.4
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pitlicek(a)gmail.com
Some games with latest Source engine (Alien Swarm, Left for Dead 2) has
sometimes grayed out "Enable multicore rendering" in options menu. But when
It's not grayed out, and I enable it, it works like it's supposed to, giving me
notable fps boost and using both my CPU cores.
But I'm using virtual desktop, to still be able to communicate with my friend
using IM. But sometimes, when I leave virtual desktop and want to return back,
the VD is not redrawing. I can still hear music, game sounds, even blindly open
in-game console nad write quit to exit the game properly. This is not happening
if multicore is disabled in game.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23150
Summary: Mass Effect 2: No audio in menus/videos/game
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: NEW
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=28791)
--> (http://bugs.winehq.org/attachment.cgi?id=28791)
terminal output
The only place you can get sound is in the launcher. Everything else is silent.
I have OpenAL installed, and ~/.alsoftrc contains:
austin@midna:~$ cat .alsoftrc
drivers = alsa
I've tried disabling mmdevapi in winecfg, changing windows version to vista/7,
using hardware emulation, using OSS instead of ALSA, etc., but have yet to get
any sound out.
The AppDB suggests installing foobar2000, then:
"Use foobar2000 to set the playback device and then select the Direct Analog
version in MassEffect2Config.exe."
though in the configuration tool's audio tab, the sound devices list is empty,
for me (with/without foobar2000).
Terminal output attached, though there's nothing obvious there.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29947
Bug #: 29947
Summary: Option to set virtual desktops to the current
resolution
Product: Wine
Version: 1.4-rc4
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sworddragon2(a)aol.com
Classification: Unclassified
At default the option "Emulate a virtual desktop" is set to 800x600 in winecfg.
What about an option that sets the desktop size for virtual desktops
automatically to the resolution of the system?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18846
Summary: Anti-Grain Geometry GDI Demo does not render
Product: Wine
Version: 1.1.23
Platform: PC
URL: http://www.antigrain.com/demo/GDI_graph_test.zip
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
This is a follow up to bug 10981. The Anti-Grain Geometry GDI Demo runs now,
but GdipDrawImagePointRectI is a stub so Wine users don't see the pretty
pictures.
http://www.antigrain.com/demo/graph_test.gif
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26813
Summary: Problems extracting python-3.1.3.amd64.msi under
wine's msiexec (works on WinXP)
Product: Wine
Version: 1.3.18
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: conathan(a)gmail.com
I was attempting to extract the contents of python-3.1.3.amd64.msi
under wine 1.3.17 32bit, using the following command:
wget http://python.org/ftp/python/3.1.3/python-3.1.3.amd64.msi
msiexec /a python-3.1.3.amd64.msi /qb TARGETDIR=out #tried c:\\out as well
and it exits immediately with the following (which I believe is a red
herring, 32bit also says this)
fixme:storage:create_storagefile Storage share mode not implemented.
I tried this out on windows XP 32bit, and it extracted the files just fine.
the 32bit python extracted just fine
(http://python.org/ftp/python/3.1.3/python-3.1.3.msi)
(Note: Not trying to install it, just extract the files within for use
within a bash script)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42601
Bug ID: 42601
Summary: Foxit Reader Crashes after running for an extended
period of time
Product: Wine
Version: 2.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seanaubin(a)gmail.com
Distribution: ---
Created attachment 57546
--> https://bugs.winehq.org/attachment.cgi?id=57546
Backtrace of the crash
After running Foxit Reader for an extended period of time (30 minutes) the
reader crashes. Before crashing, the graphics fail to render and are only
updated if the mouse click on them. However, the PDF itself is never updated.
Foxit Reader Version: 8.2.1.6871
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18154
Summary: cmd.exe: failure to handle file extension association
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P4
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: swelef(a)post.sk
cmd.exe doesn't handle extension association.
Test case:
Install ActivePerl, create a dummy perl script test.pl and run
wine cmd /c test.pl
cmd.exe will try to run test.pl as Unix binary
trace:process:CreateProcessW starting L"C:\\\\test.pl" as Unix binary
and (probably) fail instead of running Perl.exe as the Windows XP command
cmd /c perl.pl
Source code analysis:
The function programs/cmd/wcmdmain.c:WCMD_run_program calls FindExecutable
but mostly ignores the result. This looks like an unfinished work.
Remark:
Theoretically, some program could rely on the association. As long as such
program is not known, this is a low priority issue. Users should prefer
the explicit command
wine perl test.pl
(or "wine start /W test.pl" if they want a new console).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11770
Summary: mapi32.dll.so does not support attachments for sending
mail
Product: Wine
Version: 0.9.56.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Mark_Neyhart(a)legis.state.ak.us
Applications like Microsoft Excel 2002 and Word 2002 have a File...Send To
function which should bring up an email client with the current file attached.
The DLL override mapi32.dll.so does not support attachments. The sendmail.c
source for this dll has a FIXME which outputs "Ignoring attachments".
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32680
Bug #: 32680
Summary: cmd.exe Add support for CMDEXTVERSION, CMDCMDLINE,
HIGHESTNUMANODENUMBER
Product: Wine
Version: 1.5.21
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: cmd
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: us(a)edmeades.me.uk
Classification: Unclassified
%CMDEXTVERSION%
%CMDCMDLINE%
%HIGHESTNUMANODENUMBER%
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32619
Bug #: 32619
Summary: Tom Clancy's Rainbow Six: Lockdown can't save a game
(directory not created)
Product: Wine
Version: 1.5.20
Platform: x86
URL: http://www.fileplanet.com/160005/160000/fileinfo/Tom-C
lancy%27s-Rainbow-Six:-Lockdown-Demo
OS/Version: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Classification: Unclassified
Created attachment 43045
--> http://bugs.winehq.org/attachment.cgi?id=43045
terminal output
Normally the game should perform an autosave when starting the first mission,
and it should allow you to perform a manual save anytime in a mission. Neither
of them work in Wine.
1. After performing a manual save in the game, a 'save successful' message is
shown on the screen, however, if I open the <Load game> menu, it is empty.
2. When the player dies there is an option to restore the last saved game:
clicking on this option results in a crash as can be seen in the attached log
file.
The demo version doesn't let you save the game, but it does perform an
autosave, thus the crash can be reproduced with the demo too. Here's how:
1. install the demo, the game needs native d3dx9_36 and dxdiagn (bug #32163).
2. start the demo with Lockdown.exe, skip the intros. In the menu choose
<Single Player> - <Start Mission> and wait until the game is loaded.
3. press '4' to instruct teammates to stay back. There will be some bad guys
around the corner, step to them without shooting so the player dies pretty
soon.
4. the menu with statistics appears, click on <Load Last Save>...the game
crashes at this point.
There's nothing serious in the terminal, the game's own log file contains:
[ERROR | IkeStateMgr::SaveGame | 735] Could not open file c:/program
files/ubisoft/red storm entertainment/rainbow six lockdown
demo/data/save/game/autosave.sav
This directory structure does exist in Wine:
C:/Program Files/Ubisoft/Red Storm Entertainment/Rainbow Six Lockdown
Demo/data/save
Inside ../save there should be a /game directory which contains the saved
games. This directory (as well as an autosave.sav) should be created when you
start the first mission. For some reason the /game directory is not created in
Wine.
Workaround: you have to manually create the /game directory before starting the
game the first time. Saving/loading will work from then on.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31078
Bug #: 31078
Summary: Need For Speed Hot Pursuit (2010) performance is
unacceptable
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vanuan(a)gmail.com
Classification: Unclassified
After fixing the crash http://bugs.winehq.org/show_bug.cgi?id=31031
I was able to run NFS11 (via Launcher.exe).
The performance, however, is unacceptable.
Running WINEDEBUG=fps reveals 5 fps on car selection screen. Setting UseGLSL to
disabled makes it 6 fps. AlwaysOffsceen=enabled makes it 4 fps.
When actually playing the game I see a mere 4 fps when UseGLSL=disabled and
minimal settings.
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.35fps
trace:fps:glxdrv_SwapBuffers @ approx 4.52fps, total 14.99fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.52fps
trace:fps:glxdrv_SwapBuffers @ approx 4.45fps, total 14.96fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.45fps
trace:fps:glxdrv_SwapBuffers @ approx 4.52fps, total 14.93fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.52fps
trace:fps:glxdrv_SwapBuffers @ approx 4.39fps, total 14.90fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.39fps
trace:fps:glxdrv_SwapBuffers @ approx 4.42fps, total 14.87fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.42fps
trace:fps:glxdrv_SwapBuffers @ approx 4.29fps, total 14.85fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 4.29fps
trace:fps:glxdrv_SwapBuffers @ approx 3.79fps, total 14.81fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 3.79fps
trace:fps:glxdrv_SwapBuffers @ approx 3.85fps, total 14.78fps
trace:fps:swapchain_gl_present 0x15e280 @ approx 3.85fps
I have nvidia GeForce 8600 which is enough according to
http://www.game-debate.com/games/index.php?g_id=1099&game=Need%20for%20Spee…
Appreciate any suggestions on improving the game performance.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20456
Summary: FEAR's installer will not let me enter the serial
number
Product: Wine
Version: 1.1.32
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wylda(a)volny.cz
Hi, F.E.A.R. installer requires entering serial number. It has several fields
for entering 4 characters (clasic 1234-5678-9abc-def0-1234).
I can enter:
* 4 "narrow" chars like 1111, iiii, etc.
or
* only 3 "fat" chars like AAA, CCC, etc.
or
* only 2 "extra fat" like WW
There are other pepole affected in AppDB:
http://appdb.winehq.org/objectManager.php?sClass=version&iId=5159&iTestingI…http://appdb.winehq.org/objectManager.php?sClass=version&iId=5159&iTestingI…
Based on other confirmations in AppDB consider UNCONFIRMED->NEW. Tested wine
versions: 0.9.50, 0.9.60, 1.0.1, 1.1.7, 1.1.10, 1.1.13, 1.1.22, 1.1.29, 1.1.31,
1.1.32 ...so it probably never worked correctly.
This is show stopper. I own two original and none is usable under wine because
of too wide chars in serial :-/
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30938
Bug #: 30938
Summary: Update a XIM candidate position when cursor location
changed
Product: Wine
Version: 1.5.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: felixonmars(a)gmail.com
Classification: Unclassified
How to reproduce:
1. $ wine notepad
2. Activate input method (SCIM/IBUS/FCITX, etc), input something
Result:
Candidate window is below the notepad window, and never moved.
Expected result:
Candidate window moves as it is in gedit.
Probably related to these patches I found:
http://markmail.org/message/haq2zykslfkhwdilhttp://markmail.org/thread/2bfrrce47cqzga4l
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37732
Bug ID: 37732
Summary: Corel Paint Shop Pro X7 Installer fails
Product: Wine
Version: 1.7.32
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 50235
--> https://bugs.winehq.org/attachment.cgi?id=50235
PSP X7 Backtrace on wine 1.7.32
Hello everyone,
I would like to share my experiences installing "Corel Paint Shop Pro X7" with
you. The installation starts up okay but a fatal error comes up when
initialising the trial installation.
I am assuming this is related to bug 27240 and 35057.
Some further info:
mwagner@linux-dnat:~/Downloads> shasum PSPX7_TBYB30.exe
7958bacb4ab198f7408066d269ca787c5b66042f PSPX7_TBYB30.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41607
Bug ID: 41607
Summary: Piggi 2 Demo version fails to start and throws runtime
and fatal error
Product: Wine
Version: 1.9.20
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 55951
--> https://bugs.winehq.org/attachment.cgi?id=55951
Backtrace wine 1.9.20
Dear wine-team,
I had a request from somebody working in agriculture to test an application in
wine and used wine 1.9.20 as 1.9.21 is not currently available on openSUSE.
A demo version is available at the following URL:
http://www.oask.de/Sauenplaner/piggi20_setup.exe
$ md5sum piggi20_setup.exe
bfd61acc354000a14e2974d383e7bd5f piggi20_setup.exe
The application throws a runtime error of 3633 (Laufzeitfehler) and then
crashes producing the debugging output shown in the attachment.
Is there anything I can do with winetricks to work aroud this issue?
Kind regards,
Maik
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25689
Summary: Combat Mission: Barbarossa to Berlin - failing to
initialize graphics
Product: Wine
Version: 1.3.10
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mat69(a)gmx.net
Created an attachment (id=32722)
--> (http://bugs.winehq.org/attachment.cgi?id=32722)
terminal output when starting cmbb
I installed CMBB and updated to 1.03, using a crack made it possible to avoid
BUG:219.
Trying to start I get a message complaining that Direct3D graphics could not be
recognised.
Attached is the terminal output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39276
Bug ID: 39276
Summary: Resizing window in TellTale games does not resize
active area
Product: Wine
Version: 1.7.50
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: robertc(a)gmail.com
Distribution: ---
In recent Telltale games (Walking Dead Season 2, Tales from the Borderlands)
resizing the display leads to some areas of the screen becoming hidden.
The games start in 1024x768 resolution by default, if you change that in the
game settings to, for instance, match your desktop resolution then you end up
with a 1024x768 panel showing the top left of game in the middle of a
blank/broken area. It is possible to interact with things outside the 1024x768
panel but you have to guess where they are.
I've attached a screenshot of the issue on my 1366x768 laptop.
This doesn't happen with The Walking Dead Season 1 so I assume this is some
update that Telltale have made to their game engine which is now broken in
WINE.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31563
Bug #: 31563
Summary: Problem with an usb-serial card reader
Product: Wine
Version: 1.5.11
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: matthieu.nue(a)gmail.com
Classification: Unclassified
I would like to use a cards reader (twin30
http://medprice.fr/lecteur-carte-vitale-fixe/lecteur-sesam-vitale-twin30-us…)
on linux with a windows programm.
The cards reader is a native serial device but it solds with a USB-serial
converter.
For testing the cards reader, i use a little programme named cpgesw32.exe.
On windows, it works.
On linux, it works with the equivalent program for linux.
So my card reader works on linux.
Now i want testing my cards reader with cpgesw32.exe on linux with wine.
The cards reader freeze after several seconds.
So i look the source code of wine.
The freeze of the device happens with the command
KERNEL32.WriteFile(0000004c,0033f2a4,00000009,0033f13c,00000000).
To continue, i used an usb sniffer. Before the freeze, the cpgesw32's program
call several command :
KERNEL32.GetCommState(0000004c,003552c0)
KERNEL32.SetCommState(0000004c,003552c0)
KERNEL32.GetCommTimeouts(0000004c,0033f8f8)
and others.
When KERNEL32.GetCommState(0000004c,003552c0) is called, the wine programm
launch :
- get_baud_rate
- get_line_control
- get_hand_flow
- get_special_chars
With the sniffer, i noticed that only the first command (get_baud_rate)
transmit a packet on the usb. After that, nothing on the usb port before the
WriteFile.
I noticed that if i open a connexion with my serial-usb device, only one
command works. If i want a second command, i need to close the conexion and
reopen it.
I suppose this is the object of the "server_get_unix_fd" function for wine.
So,
- is everyserial device works like that (one command by connexion) or is it
only my device ?
- is someone can help me on the "server_get_unix_fd" function ?
Thank you and sorry for my english (french speaker).
Matteli
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42460
Bug ID: 42460
Summary: League of Legends performance degradation over time
Product: Wine
Version: 2.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: krzysztofmachura1(a)gmail.com
Distribution: ---
After 30-40 min in game any spell casted causes stutter and fps becomes a lot
lower.
I get ~25fps at 30 min as well as stutter, after restarting game its back at
~80fps without any sttuter
Checked with
Windows xp, winetricks d3dx9_39+old LoL launcher
Windows 10, winetricks d3dx9, d3dcompiler_47 set to native+old Launcher
It happens on wine-staging with CSMT on and CSMT off, as well as normal wine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39689
Bug ID: 39689
Summary: I was trying to open sims 4 then it said there was a
erroe but i was like whatever but now whenever i try
to open the game it is just blank. It seems to have a
error with origin
Product: Wine
Version: unspecified
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: msxml3
Assignee: wine-bugs(a)winehq.org
Reporter: yungeun123(a)yahoo.com
Created attachment 52923
--> https://bugs.winehq.org/attachment.cgi?id=52923
I was trying to load the game sims 4 but there seems to be a problem
I was trying to open sims 4 then it said there was a erroe but i was like
whatever but now whenever i try to open the game it is just blank
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29071
Bug #: 29071
Summary: Falcon BMS 4: Low FPS on Wine 1.3.32
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: victhor.foster(a)gmail.com
Classification: Unclassified
Created attachment 37463
--> http://bugs.winehq.org/attachment.cgi?id=37463
In-game graphics settings window
Falcon 4 BMS runs with a very low framerate(5-7 FPS as reported by the in-game
FPS indicator) in Wine 1.3.32. However, in Wine 1.2.3, the game runs at 20-23
FPS.
The scene used for the tests was the same(default "Korea" theater, game was
started using "instant action" > "commit" button). Attached is a screenshot of
the settings window, the settings used were exactly the same for both Wine
versions.
I would just use 1.2.3 for the time being if it wasn't for a annoying bug,
where switching to another window while the game is being played(Alt+Tab)
causes the gameplay window to turn black(on menu windows, this doesn't happen).
This does not happen on 1.3.32.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21267
Summary: Fallout 3 GOTY: Crashes Randomly
Product: Wine
Version: 1.1.35
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hibbsncc1701(a)yahoo.com
Created an attachment (id=25570)
--> (http://bugs.winehq.org/attachment.cgi?id=25570)
The Console log after a crash during the black screen after the opening video.
Fallout 3 Game of the Year Edition will crash in semi-random places when
starting a New game. Some of these places include the black screen right after
the opening video, after inputting the player's name, after customizing the
character, During the Birthday scene when you are shooting the radroach with
your BB Gun, etc. It seams to be a script executing error as the game is
usually supposed to be doing something (ie. controlling the radroach so it
doesn't attack the player, moving an NPC somewhere, setting game values(player
name, how the player looks) when it stops. The Game has two different crashes
for these events, but only one shows at anytime. The first one is obvious and
the rarest a Message box pops up saying the Program encountered an error an
needs to close. A stacktrace is able to be retrieved in this case. The second
one is a freeze, ie the game is no longer controllable by the user, and the
render has stopped. Music and sound effects (such as talking) still work until
the program is killed, but the player cannot make any sound effects such as
walking or shooting a gun. The game's menus are also disabled.
I've followed the hq's guides on getting the program to run, with the small
exception of manually installing the Games for Windows Live client and .Net
Framework. As the game's installer hangs when the installer for those
components have crashed, and thus must be killed to allow the installer to
continue.
It must be noted that a save game made after Vault 101 will work normally. It's
unknown if it's the result of the save being from another computer with the
game running normally or just after Vault 101 because i can't get the game past
Vault 101 when starting a new game.
System Specs:
Mandriva Linux 2010.0 X86_64
Intel Core 2 Quadcore
Latest Nvidia Drivers as of 1/5/2010
Wine 1.1.35 Mandriva Linux Repo
(If anyone needs more just ask.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26706
Summary: SolidWorks: Some tools cannot be activated
Product: Wine
Version: 1.3.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maarten.bezemer(a)gmail.com
When clicking on the toolbar button or the menu item to activate a tool,
nothing happens.
Known tools which do not work:
- Plane (menu Insert -> Reference Geometry -> Plane)
- Convert Entities (menu Tools -> Sketch Tools -> Convert Entities)
But there are probably more occurences...?
Steps to reproduce:
- Start designing a new part
- Click the new plane button
Actual results:
Nothing happens
Expected results:
After clicking the button a new plane pane should show to fill in the
properties of the new plane and to actually create it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26873
Summary: Dekaron: crashes when starting the game from the
launcher
Product: Wine
Version: 1.3.17
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: simondani91(a)gmail.com
Created an attachment (id=34257)
--> (http://bugs.winehq.org/attachment.cgi?id=34257)
This is the backtrace from the console
Dekaron launcher works fine, but the game itself crashes just when I try to
start.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26839
Summary: 888 Poker Crashes after login and password entered
Product: Wine
Version: 1.3.18
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nmorozov(a)atlas-print.ru
Created an attachment (id=34200)
--> (http://bugs.winehq.org/attachment.cgi?id=34200)
Crash screenshot
888 Poker Crashes after login and password entered, If just wait 888 poker
reports "server unreacheble" but show player on tables and some more info. Ater
I login i see my Name my status and that got crash (see screenshor) and 888
poker client hangs
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38437
Bug ID: 38437
Summary: Does not load game
Product: Wine
Version: 0.9
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: alika0009(a)mail.ru
Created attachment 51298
--> https://bugs.winehq.org/attachment.cgi?id=51298
I do not know what to do, and want to play(((
Good day, I have a problem with the game The Sims 4. Turn on the game and
seeing the following((
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37740
Bug ID: 37740
Summary: Photoshop CS2 - Scanner IO problems
Product: Wine
Version: 1.7.32
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maiktapwagner(a)aol.com
Distribution: ---
Created attachment 50251
--> https://bugs.winehq.org/attachment.cgi?id=50251
Console output - Wine 1.7.32
Hello everyone,
Photoshop CS2 seems to be unable to contact the TWAIN source of my USB scanner
a Hewlett Packard 2544 AIO device. I will create two attachments, one for the
plain console output and one with WINEDEBUG=+twain
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37739
Bug ID: 37739
Summary: Web page with ActiveX component crashes IE8
Product: Wine
Version: 1.7.32
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: steko(a)iosa.it
Distribution: ---
Created attachment 50249
--> https://bugs.winehq.org/attachment.cgi?id=50249
backtrace
We are trying to use IE8 in Wine for accessing an Intranet application that is
also based on ActiveX components. I was positively surprised to see that
everything works smoothly, except for this crash that seems to happen
consistently.
Obviously I have no way to make this application available for testing, as I am
only a user and I've got no control over the deployment.
The crash occurs when I load a specific type of page in the app, with forms
that display file attachments and normally would let me upload attachments -
not with normal HTML forms but through the ActiveX controls, AFAICT. This stuff
works normally under Windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35741
Bug ID: 35741
Summary: Native Mumble push-to-talk issues when in steam under
wine games
Product: Wine
Version: 1.7.13
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mysticknight487(a)aim.com
Once in a steam game the push to talk gets the initial push, but not the
releasing of the push-to-talk button, when using a mouse key for push to talk.
When using keyboard push to talk the behavior is as expected.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36770
Bug ID: 36770
Summary: Pinball Arcade refuses to start
Product: Wine
Version: 1.7.19
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: dmn2004404(a)gmail.com
Created attachment 48831
--> http://bugs.winehq.org/attachment.cgi?id=48831
backtrace.txt generated by error report for PinballArcade.exe
On starting Pinball Arcade from the Windows version of Steam installed via
Winetricks, Wine reports: "The program PinballArcade.exe has encountered a
serious problem and needs to close. We are sorry for the inconvenience."
Clicking "Error Details" returns the following backtrace, attached to this bug
report.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27909
Summary: EVE Online: Installer is missing left half of text
Product: Wine
Version: 1.3.24
Platform: x86
URL: http://www.eveonline.com/download/
OS/Version: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=35705)
--> (http://bugs.winehq.org/attachment.cgi?id=35705)
bad screenshot
See screenshot. No terminal output.
tried winetricks ie7 allfonts riched20 riched30 gdiplus, but none made a
difference (though allfonts gave better fonts, obviously :p).
481a33ca000fcc136cbecd666cd181688882d836 EVE_Premium_Setup_273475.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24028
Summary: WaitForInputIdle doesn't return for specific
application (infinite loop?)
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: zajec5(a)gmail.com
There is application called Injection Launcher that launches Ultima Online
(game) client and then hacks it. When using Wine, Injection Launcher doesn't
notice that client started.
Is uses something like:
if (WaitForInputIdle(pi.hProcess, INFINITE) != 0)
{
api_error("Failed waiting for client window to open");
error_stage(STAGE_STARTCLIENT);
return 0;
}
This bug is present in Wine since "ever" and exists in git.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41075
Bug ID: 41075
Summary: Into The Stars requires libcef.dll
Product: Wine
Version: 1.9.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fjfrackiewicz(a)gmail.com
Distribution: ---
Created attachment 55258
--> https://bugs.winehq.org/attachment.cgi?id=55258
Terminal output Wine 1.9.15-272-g0b49495
While testing the latest git version of Wine with this game, I noticed that
there is the following terminal output when starting the game:
err:module:import_dll Library libcef.dll (which is needed by L"C:\\GOG
Games\\Into the
Stars\\Nebraska\\CefRuntime\\Binaries\\Win64\\CefFramework.dll") not found
Some basic googling shows that this might be a .DLL related to Chrome but I am
not 100% sure.
If this bug is invalid, please let me know. Terminal output attached
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37711
Bug ID: 37711
Summary: payday 2 broken lighting
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: davyaxel(a)free.fr
Distribution: ---
On wine/radeonsi, payday 2 has broken lighting, and objects have no shadows.
This doesn't make the game unplayable. It's just objects have no shadows.
Gallium Nine has light working.
While trying to fix a bug with Gallium Nine textures of some parts of the road,
I tested different configuration of input channels / default values for empty
channels for the textures used by the game.
In particular for depth stencil formats, like D3DFMT_D24S8 used by the game, we
have the depth on r, the stencil on g, and b=0 a=1
I don't remember what different combinations I tried for this format, but
basically when different from that, I got broken lights exactly like wine.
Which makes me think wine probably doesn't handle this format correctly.
If you want to reproduce we have a server with the trace (too big to put here -
taken with apitrace), come on our channel (#d3d9) to ask for access.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39768
Bug ID: 39768
Summary: scaling window for games with low resolution
Product: Wine
Version: 1.8-rc3
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: legluondunet(a)free.fr
Distribution: ---
Hello,
some old games do not have a resolution bigger than 640x480.
For example:
Shivers
The longest journey
Motoracer
..
and the modern displays does not have a 4:3 ratio, so it is not possible to put
this games in fullscreen or the games will be stretch. Some modern screens do
not even support this resolution.
Do you plan to add a scaling feature to wine?
LGDN
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37725
Bug ID: 37725
Summary: Tera Online seems to Freeze
Product: Wine
Version: 1.7.32
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: eli(a)orbsky.homelinux.org
Distribution: ---
Tera online seems to freeze after clicking on the Play on the Launcher.
Debug info is coming soon.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18950
Summary: eBay unable to authorise Turbo Lister
Product: Wine
Version: 1.1.23
Platform: PC
URL: http://download.ebay.com/turbo_lister2/setupUK.exe
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=21800)
--> (http://bugs.winehq.org/attachment.cgi?id=21800)
Screenshot
Turbo Lister connects to eBay to authorise itself to access your account.
Under Wine, the eBay site reports success, but Turbo Lister doesn't do anything
about it. Nothing new is printed in the console, but there are lots of these:
fixme:shdocvw:ClOleCommandTarget_Exec
Not sure what traces would help here...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38923
Bug ID: 38923
Summary: Unity editor eror [32x with 32x wine]
Product: Wine
Version: 20050930
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: free9988771(a)gmail.com
Distribution: ---
Created attachment 51853
--> https://bugs.winehq.org/attachment.cgi?id=51853
unity editor eror
[07/15/15 13:06:45] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
[07/15/15 13:07:31] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
[07/15/15 13:08:01] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
ALSA lib pcm.c:7843:(snd_pcm_recover) underrun occurred
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
[07/15/15 13:52:29] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
ALSA lib pcm.c:7843:(snd_pcm_recover) underrun occurred
[07/15/15 13:59:00] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
[07/15/15 13:59:01] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
ALSA lib pcm.c:7843:(snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843:(snd_pcm_recover) underrun occurred
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
[07/15/15 13:59:19] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
[07/15/15 14:07:12] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
ALSA lib pcm.c:7843:(snd_pcm_recover) underrun occurred
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
[07/15/15 14:08:12] - Running wine-1.7.47 Unity.exe (Working directory :
/home/toghrul/.PlayOnLinux/wineprefix/Unity3new/drive_c/Program
Files/Unity/Editor)
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make
sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the
winbind package of your distribution.
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2d1400 (device=2d access=0
func=500 method=0)
fixme:wbemprox:client_security_SetBlanket 0xf71feabc, 0x158ff0, 10, 0, (null),
3, 3, (nil), 0x00000000
fixme:wbemprox:client_security_Release 0xf71feabc
fixme:wbemprox:wbem_services_CreateInstanceEnum unsupported flags 0x00000030
fixme:win:DisableProcessWindowsGhosting : stub
fixme:process:SetProcessDEPPolicy (3): stub
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:imm:ImmDisableTextFrameService Stub
fixme:thread:GetThreadPreferredUILanguages 56, 0xe7fe508, (nil) 0xe7fe50c
fixme:winsock:WSALookupServiceBeginW (0xe7fe3dc 0x00000ff0 0xe7fe418) Stub!
fixme:iphlpapi:NotifyAddrChange (Handle 0xe7fe544, overlapped 0x67a1e48): stub
fixme:win:RegisterDeviceNotificationW (hwnd=0x10062,
filter=0xe7fe550,flags=0x00000000) returns a fake device notification handle!
fixme:win:RegisterDeviceNotificationW (hwnd=0x10062,
filter=0xe7fe550,flags=0x00000000) returns a fake device notification handle!
fixme:ver:GetCurrentPackageId (0xd02ea08 (nil)): stub
fixme:win:EnumDisplayDevicesW ((null),0,0xe7fdeb0,0x00000000), stub!
fixme:ntdll:NtLockFile I/O completion on lock not implemented yet
fixme:wtsapi:WTSRegisterSessionNotification Stub 0x2004e 0x00000000
fixme:msctf:InputProcessorProfileMgr_GetActiveProfile
(0x15a4d8)->({34745c63-b2f0-4784-8b67-5e12c8701a31} 0xe7fe290)
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
fixme:advapi:RegisterTraceGuidsW (0x352a270, 0x57eea98,
{3dada31d-19ef-4dc1-b345-037927193422}, 1, 0x57b6354, (null), (null),
0x57eeab0): stub
fixme:advapi:RegisterTraceGuidsW register trace class
{00000000-0000-0000-0000-000000000000}
err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make
sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the
winbind package of your distribution.
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:process:SetProcessDEPPolicy (3): stub
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:advapi:RegisterTraceGuidsW (0x1013a270, 0x123fea98,
{3dada31d-19ef-4dc1-b345-037927193422}, 1, 0x123c6354, (null), (null),
0x123feab0): stub
fixme:advapi:RegisterTraceGuidsW register trace class
{00000000-0000-0000-0000-000000000000}
fixme:gdi:GdiInitializeLanguagePack stub
fixme:module:load_library unsupported flag(s) used (flags: 0x00000800)
fixme:ver:GetCurrentPackageId (0x292ea08 (nil)): stub
fixme:wtsapi:WTSUnRegisterSessionNotification Stub 0x2004e
fixme:win:EnumDisplayDevicesW ((null),0,0x2dae078,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x2dadf58,0x00000000), stub!
fixme:dxgi:dxgi_output_GetDesc iface 0x1c00f0, desc 0x2dae41c stub!
fixme:wbemprox:client_security_SetBlanket 0xf71feabc, 0x1c0118, 10, 0, (null),
3, 3, (nil), 0x00000000
fixme:wbemprox:client_security_Release 0xf71feabc
fixme:win:EnumDisplayDevicesW ((null),0,0x2dade58,0x00000000), stub!
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
fixme:imm:ImmReleaseContext (0x100e2, 0x1e0a08): stub
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:win:RegisterRawInputDevices Unhandled flags 0x100 for device 0.
fixme:win:RegisterDeviceNotificationW (hwnd=0x100ee,
filter=0x2dae9a4,flags=0x00000004) returns a fake device notification handle!
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
err:wgl:glxdrv_wglShareLists Could not share display lists, one of the contexts
has been current already !
fixme:dbghelp:validate_addr64 Unsupported address fffffffff71d0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff71b0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff7060000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff75b0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff7310000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff72f0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff72b0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff6470000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff30b0000
fixme:dbghelp:validate_addr64 Unsupported address fffffffff2520000
fixme:dbghelp:validate_addr64 Unsupported address ffffffffeb4e0000
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr
0x105a097
wineserver crashed, please enable coredumps (ulimit -c unlimited) and restart.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41275
Bug ID: 41275
Summary: Don't set Notepad as the default application handler
for .txt
Product: Wine
Version: 1.8
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ddascalescu+wine(a)gmail.com
Distribution: ---
After installing Wine, Notepad became the default handler for .txt files.
Double-clicking on a .txt file from Nautilus or Unity Dash launches Notepad,
which is definitely not what I want. Notepad is one of the worst editors out
there, and I had Kate and Geany installed.
In Ubuntu, Default Applications doesn't show an entry for Text files, so it's
not easy to undo this change.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30237
Bug #: 30237
Summary: Nuclear Strike fails to start
Product: Wine
Version: 1.5.0
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maquis196(a)yahoo.co.uk
Classification: Unclassified
Game fails to start. Will post console output and +all log. Game is an old 98
application and I can see a VXD in the game directory it must be trying to load
(been a while since Ive seen one of those).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39900
Bug ID: 39900
Summary: Flash Player 20 control panel applet does not load
Product: Wine
Version: 1.8
Hardware: x86
URL: https://get.adobe.com/flashplayer/otherversions/
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jhansonxi(a)gmail.com
Distribution: Ubuntu
Xubuntu 14.04 x86_64
Adobe Flash (NPAPI) 20.0.0.235
Mozilla/5.0 (Windows NT 6.1; Win64; x64; rv:43.0) Gecko/20100101 Firefox/43.0
Steps to reproduce:
1. Install Adobe Flash Player 20 NPAPI
(https://get.adobe.com/flashplayer/otherversions/)
2. Attempt to load the control panel applet via "wine control" or directly
with:
wine rundll32 shell32.dll,Control_RunDLL
…/drive_c/windows/system32/FlashPlayerCPLApp.cpl
3. Result: Exits silently. No Wine messages.
There is a "Settings Manager" (…/drive_c/windows/system32/FlashPlayerApp.exe)
that works normally. I don't know how its feature set compares to the applet.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35991
Bug ID: 35991
Summary: Communication via COM1 crashes the app
Product: Wine
Version: 1.7.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: sh.yaron(a)gmail.com
Created attachment 48115
--> http://bugs.winehq.org/attachment.cgi?id=48115
Backtrace from after the crash.
I was trying to load the project with PLC online communication but apparently
when I tried to check the connection the app crashed, backtrace attached.
The PC is connected to COM1 of the PC.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39513
Bug ID: 39513
Summary: Desperados: input lag after resuming from pause
Product: Wine
Version: 1.7.53
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
Assignee: wine-bugs(a)winehq.org
Reporter: alessandro.pezzoni(a)runbox.com
Distribution: ---
Created attachment 52652
--> https://bugs.winehq.org/attachment.cgi?id=52652
Sample savegame (to avoid cutscenes)
While playing "Desperados: Dead or Alive" all input will lag for a few seconds
after loading a saved game or resuming the game from the pause menu. It looks
like all input is cached during that time and then executed all at once.
The issue can be reproduced with the demo, obtainable from the Internet Archive
[1]:
1. Install the demo in a clean prefix;
2. (Optional) Copy the attached savegame folder to "Desperados Demo/Game/Data";
3. Start the demo;
4. Load the savegame from 2. or start a new game;
5. Press "Esc" and click "Continue";
6. Moving the mouse or pressing a keyboard shortcut will have no effect for a
few seconds.
I've tested this issue on Arch Linux with wine stable 1.7.53 and with the
current git head, wine-1.7.53-183-g12111d8.
[1]: https://archive.org/download/desperadosDemo/desperadosDemo.rar
sha1: 3c07da95cdc6807b9c08ff3d17de64790c08ec07
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38350
Bug ID: 38350
Summary: FTDI Vinculum II IDE V2.0.2-SP2 gets OLE Error
80020006 on startup and exits
Product: Wine
Version: 1.7.38
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: skenton(a)ou.edu
Distribution: ---
The FTDI Vinculum II IDE for firmware development pops up an OLE error dialog
and exits immediately after the splash screen is loaded at startup.
Works fine on WindowsXP-SP3. Below is everything I thought might help.
VinIDE (current version as of 2015Apr03)
Download Vinculum II Toolchain V2.0.2-SP2
http://www.ftdichip.com/Firmware/vnc2toolchain/Vinculum%20II%20Installer%20…
(popup)
Vinculum II IDE
OLE error 80020006
OK
$ wine --version
wine-1.7.38
$ wineconsole
fixme:wincodecs:PngDecoder_Block_GetCount stub
fixme:ole:RemUnknown_QueryInterface No interface for iid
{00000019-0000-0000-c000-000000000046}
fixme:msxml:domelem_setAttributeNode (0x14aaf0)->(0x14ac98 0x33f774): semi-stub
$ uname -a
Linux Cube 3.16.0-33-generic #44-Ubuntu SMP Thu Mar 12 12:19:35 UTC 2015 x86_64
x86_64 x86_64 GNU/Linux
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27439
Summary: Age of Pirates - City of Abandoned Ships crashes while
entering the sea
Product: Wine
Version: 1.3.21
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kitmaxter(a)gmail.com
Created an attachment (id=35091)
--> (http://bugs.winehq.org/attachment.cgi?id=35091)
wine log while trying to enter the sea
Mostly every time, while trying to enter the sea from landing, game crashes.
Some times it is possible to enter the sea, then go into the map mode and go to
other island, but the game will crash on next try to enter the sea mode
(encounters like storm or pirates, or harbor of other island).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11268
Summary: Civilization I for Windows (16-bt) incorrectly displays
some dialogues
Product: Wine
Version: 0.9.53.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: neptunia(a)mail.ru
Some dialogue windows in the game have non-rendered areas near window border
which display garbage/previous windows existed in this place.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32679
Bug #: 32679
Summary: cmd.exe Add support for || and &&
Product: Wine
Version: 1.5.21
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: cmd
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: us(a)edmeades.me.uk
Classification: Unclassified
Add support to cmd.exe for the && and || functionality - They are currently
parsed and handled ok, but not correctly processed
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37296
Bug ID: 37296
Summary: Winecfg differs when it runs on real Windows
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
Assignee: wine-bugs(a)winehq.org
Reporter: carlo.bramix(a)libero.it
Created attachment 49603
--> https://bugs.winehq.org/attachment.cgi?id=49603
Screenshot of Winecfg on Windows
I'm able to run Winecfg on real Windows and I discovered that there is a
graphic glitch in the about dialog.
See attached screenshot for details.
I was able to fix this problem in about.c, by adding DI_MASK flag in the call
of DrawIconEx(), which it is also the correct thing to do in this case.
But strangely, this graphic bug does not happen when winecfg runs in WINE
(that's why probably nobody noticed the absence of the DI_MASK flag).
I would suggest to check and compare a bit the behaviour between Windows and
WINE against the functions DrawIconEx() and LoadImageW() since it seems to me
that there is a difference from the correct result.
NOTE: When it runs on the real Windows, because the presence of a SysLink
inside the resource dialog, Winecfg requires to be linked with commctrl v6, so
it needs a manifest file, as explained here:
http://msdn.microsoft.com/en-us/library/windows/desktop/bb773175%28v=vs.85%…
Another thing, but less important, is that the resource compiler refused the
icon of the application, saying the icon is made with the old DIB format and,
for this reason, it has been discarded; that's why my screenshot shows the app
without the icon in the upper left corner. But hopefully, this can be solved
easily if someone wants.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25961
Summary: Visual C++ 2008 runtime not marked as installed by
default
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: NEW
Severity: enhancement
Priority: P2
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
The installer for the app I'm looking at now
checks for the visual c++ 2008 runtime, and runs
D:\\Redistributable\\vcredist_x86_en.exe if it wasn't found.
Now, one of these days, Wine's builtin msvcr / msvcp is going to suffice
for this and most other apps, at which point Wine might want to set
the registry to indicate that vcrun2008 is already installed.
This might be in the distant future, depending on how many apps need
the other things that come with the runtime package, like mfc and a full
msvcp, that wine does not yet provide. So this bug will likely remain
open for a long time (if it's not closed for being too far ahead of its time).
For the record, this seems to be how the app is checking whether vcrun2008
is installed:
0024:Call msi.MsiQueryProductStateW(0033e2de
L"{9A25302D-30C0-39D9-BD6F-21E6EC160475}") ret=0040b9ad
0024:Call advapi32.RegOpenKeyW(80000002,0033d6c2
L"Software\\Microsoft\\Windows\\CurrentVersion\\Installer\\Managed\\S-1-5-4\\Installer\\Products\\D20352A90C039D93DBF6126ECE614057",0033d968)
ret=7ef2cd5c
0024:Ret advapi32.RegOpenKeyW() retval=00000002 ret=7ef2cd5c
0024:Call advapi32.RegOpenKeyW(80000001,0033d6c2
L"Software\\Microsoft\\Installer\\Products\\D20352A90C039D93DBF6126ECE614057",0033d968)
ret=7ef2cd5c
0024:Ret advapi32.RegOpenKeyW() retval=00000002 ret=7ef2cd5c
0024:Call advapi32.RegOpenKeyW(80000002,0033d6c2
L"Software\\Classes\\Installer\\Products\\D20352A90C039D93DBF6126ECE614057",0033d968)
ret=7ef2cd5c
0024:Ret advapi32.RegOpenKeyW() retval=00000002 ret=7ef2cd5c
0024:Call advapi32.RegOpenKeyW(80000002,0033d4ca
L"Software\\Microsoft\\Windows\\CurrentVersion\\Installer\\UserData\\S-1-5-4\\Products\\D20352A90C039D93DBF6126ECE614057\\InstallProperties",0033d964)
ret=7ef2b600
0024:Ret advapi32.RegOpenKeyW() retval=00000002 ret=7ef2b600
0024:Ret msi.MsiQueryProductStateW() retval=ffffffff ret=0040b9ad
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31990
Bug #: 31990
Summary: Add ability to upload extra files along with test ext
Product: Wine-Testbot
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: titan.costa(a)gmail.com
Classification: Unclassified
That would be good to have the ability to upload extra files (avi files, dlls,
.drv, ...) to perform individual test (not part of the test suite).
Otherwise it requires to embed the file or use a self extracting exe which are
not very convenient.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33126
Bug #: 33126
Summary: divided SysEx and coalesced midiOutLongMsg
Product: Wine
Version: 1.5.25
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: winealsa.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
Classification: Unclassified
Johannes Kroll reported in wine-patches that the KORG Kontrol Editor software
hung after sending an ill-formed SysEx via winealsa's midiOutLongMsg.
http://www.winehq.org/pipermail/wine-patches/2013-January/121335.html
The MIDIHDR data is F0 ... F7 00 00 00 (125 bytes).
http://www.winehq.org/pipermail/wine-devel/2013-February/098852.html
He observed that no hang occurs when skipping the trailing 3 zero bytes. F7 is
the "End Of SysEx" (EOX) marker.
It is still unclear what happens. MIDI HW is expected to skip over bogus
bytes, thus the zero bytes should cause no harm. OTOH, ALSA might be getting
into trouble processing ill-formed messages, and we don't know if or how many
bytes ALSA actually sent out through the serial port.
In any case, midiOutLongMsg handling in Wine needs fixes.
- winealsa should extract the F0...F7 part and send that as a SysEx.
- More generally, midiOutLong is known to accept not only SysEx packets, but
also coalesced status messages. Some MIDI authors prefer to send e.g. chords
via one LongMsg rather than successive calls to midiOutShortMsg, arguing that
it's faster. Hence all Wine MIDI drivers need to decompose midiOutLongMsg into
packets consisting of status message, regular SysEx ... and possibly junk.
- All APIs (MS, ALSA, OSS, CA) acknowledge the existence of divided SysEx. As
a result, framing SysEx with F0 ... F7 is entirely under application control.
The current winealsa framing code is simply wrong.
- winecoreaudio always declared 3 bytes for short messages, even program
change.
I have written a sequence of patches to fix all of this. The only thing that
is unclear is how to encapsulate garbage data like the above 3 zero bytes or
real time messages with ALSA. What ALSA API function and what ALSA message
type to use? Heck, I'm not even sure winealsa.drv/midi.c:modData is ok to send
a 2-byte MTC quarter frame via snd_seq_ev_set_sysex instead of using a
primitive that sets the type SND_SEQ_EVENT_CLOCK/TICK.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39206
Bug ID: 39206
Summary: Lylian demo hangs after intro video
Product: Wine
Version: 1.7.50
Hardware: x86-64
URL: http://www.fileplanet.com/217922/210000/fileinfo/Lylia
n-Demo
OS: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: 00cpxxx(a)gmail.com
Distribution: ---
Currently wine plays the introduction video but after that it hangs and only
resumes when a few keystrokes and/or mouse clicks are performed.
The problem seems related to quartz but since I'm not sure the component is not
set yet. The video playback ends but it looks like quartz does not recognize
that and keeps waiting for things to happen.
Last lines from the quartz log:
0032:trace:quartz:StdMediaSample2_Release (0x1bb4c0)->(): new ref = 0
0032:trace:quartz:BaseMemAllocator_ReleaseBuffer (0x1baea0)->(0x1bb4c0)
0032:trace:quartz:StdMediaSample2_Release (0x1b92a8)->(): new ref = 0
0032:trace:quartz:BaseMemAllocator_ReleaseBuffer (0x1b8298)->(0x1b92a8)
0032:trace:quartz:AVISplitter_SendEndOfFile End of file reached
0032:fixme:qedit:SampleGrabber_IPin_EndOfStream : stub
0032:trace:quartz:AVISplitter_SendEndOfFile --> 0
0032:trace:quartz:AVISplitter_thread_reader Thread 0 terminated properly
002e:fixme:quartz:FileAsyncReader_WaitForNext Returned: 258 (00000578)
002e:trace:quartz:FileAsyncReader_WaitForNext -- 8004022e
002e:trace:quartz:PullPin_Thread_Process Process sample
002e:trace:quartz:FileAsyncReader_WaitForNext (10000, 0x139e924, 0x139e910)
002e:warn:quartz:FileAsyncReader_WaitForNext Called without samples in queue
and not flushing!!
002e:fixme:quartz:FileAsyncReader_WaitForNext Returned: 258 (00000578)
002e:trace:quartz:FileAsyncReader_WaitForNext -- 8004022e
002e:trace:quartz:PullPin_Thread_Process Process sample
002e:trace:quartz:FileAsyncReader_WaitForNext (10000, 0x139e924, 0x139e910)
002e:warn:quartz:FileAsyncReader_WaitForNext Called without samples in queue
and not flushing!!
002e:fixme:quartz:FileAsyncReader_WaitForNext Returned: 258 (00000578)
002e:trace:quartz:FileAsyncReader_WaitForNext -- 8004022e
The last 4 lines repeat forever.
If I change the game AVI file to any other AVI it plays fine and ends fine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35163
Bug ID: 35163
Summary: Victoria 2 crashes on start with built-in quartz
Product: Wine
Version: 1.7.8
Hardware: x86
URL: http://www.gamershell.com/download_85888.shtml
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: quartz
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Classification: Unclassified
Created attachment 46906
--> http://bugs.winehq.org/attachment.cgi?id=46906
terminal output
The game crashes shortly after starting with Wine's built-in quartz.dll.
'winetricks quartz' is a workaround.
Lots of
>fixme:quartz:parse_header Not a valid header: ff:ff:ff:ff
are preceding the crash. They're probably the game music files (mp3 format)
that causing the problem.
Fedora 19
wine-1.7.8-114-g1928d61 (compiled from source without gstreamer support)
Alsa 1.0.27 (Pulseaudio is not running)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21344
Summary: Buffer overflow in WCMD_run_program
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: cmd
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dima(a)gmail.com
The WCMD_run_program function in wcmdmain.c copies pathposn into thisDir
without checking the size:
/* Work on the first directory on the search path */
pos = strchrW(pathposn, ';');
if (pos) {
memcpy(thisDir, pathposn, (pos-pathposn) * sizeof(WCHAR));
thisDir[(pos-pathposn)] = 0x00;
pathposn = pos+1;
} else {
strcpyW(thisDir, pathposn);
pathposn = NULL;
}
The size of pathposn can be up to MAXSTRING, while thisDir has size MAX_PATH.
To reproduce:
$ wine cmd /c
'Z:\xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\foo'
err:seh:setup_exception_record stack overflow 2144 bytes in thread 0019 eip
7bc3ea3e esp 00230ad0 stack 0x230000-0x231000-0x330000
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41197
Bug ID: 41197
Summary: Wine support for _NET_WM_PING
Product: Wine
Version: 1.9.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fzatlouk(a)redhat.com
Distribution: ---
Created attachment 55435
--> https://bugs.winehq.org/attachment.cgi?id=55435
Screenshot of Battlefield 2 after game just finished loading (and it's not
stuck)
I am not sure if wine supports _NET_WM_PING [0]. However, if it does, it should
be able to emulate _NET_WM_PING pong for some time if application running under
Wine is not responding.
Otherwise, most VM (mutter from GNOME Shell for example) gonna show up window
about not responding application (even if application is loading or just
finished loading) which could destabilize application itself (especially when
in full screen).
Could be seen in: Battlefield 2, World of Warcraft and probably plenty of other
games.
[0]
https://specifications.freedesktop.org/wm-spec/wm-spec-latest.html#idm14020…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42366
Bug ID: 42366
Summary: Unable to bing Common Language Runtime
Product: Wine
Version: 2.0-rc6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sjayejohnston(a)gmail.com
Distribution: ---
I'm trying to run a program,Brain Vision Analyzer through wine
I get a dialogue box saying "Unable to bin Common Language Runtime
(0x80131700)" and in the terminal wine is reporting (fixme:mscoree:get_runtime
Unrecognized version L"v4.0.20926"
Happy to provide more info.
Best
S
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30976
Bug #: 30976
Summary: Navyfield crashes after splash screen
Product: Wine
Version: 1.5.6
Platform: x86
URL: http://www.navyfield.com/Download/Game/Main.aspx
OS/Version: Linux
Status: NEW
Keywords: download, regression
Severity: minor
Priority: P2
Component: winegstreamer
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
CC: paulthetall(a)gmail.com
Depends on: 27109, 30733, 30975
Classification: Unclassified
Install the demo from http://www.navyfield.com/Download/Game/Main.aspx
austin@aw25 ~ $ sha1sum NF1343.exe
1c7b6bd0903e3876d31556b13f199b771117d9c2 NF1343.exe
austin@aw25 ~ $ du -h NF1343.exe
623M NF1343.exe
run `winetricks vcrun6` (bug 27109). Install as normal, all defaults. Run the
game, and ignore the messed up launcher graphics (bug 30975). Click the bottom
right gray button to get in game. A splash screen will show, and shortly after,
crash.
With native quartz, it gets slightly further (potentially bug 16733, but it's
hard to tell). If you add in native devenum, then you can get to the point
where it wants to download a patch.
So, winegstreamer is lacking here. I'll attach its output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41297
Bug ID: 41297
Summary: Fable Lost Chapters Crash at begins
Product: Wine
Version: 1.9.18
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mrdeathjr28(a)yahoo.es
Distribution: ---
Created attachment 55623
--> https://bugs.winehq.org/attachment.cgi?id=55623
backtrace-fable-lost-chapters
Game begins normally with cinematics until game shows press left mouse button
for entry and if pressed game crash
However you can push right mouse button (game dont entry) and push esc key or
enter for select and game dont crash but dont entry
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9261
Summary: Final Fantasy 8 with hardware acceleration shows wrong
colors
Product: Wine
Version: 0.9.42.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: alessandro.guido(a)gmail.com
Created an attachment (id=7514)
--> (http://bugs.winehq.org/attachment.cgi?id=7514)
Snapshots that shows how the game looks
Like the attached image shows, wrong colors are shown when usign Final Fantasy
8 with hardware acceleration enabled.
There are plenty of messages like:
fixme:d3d7:IDirect3DTextureImpl_PaletteChanged
(0x2eb3148)->(00000000,00000100): stub!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13829
Summary: Wine does not have Japanese fonts
Product: Wine
Version: 1.0-rc4
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: fonts
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hramrach(a)centrum.cz
These are needed to support Japanese applications.
On Windows there is MS Gothic which is duplicated as MS PGothic and MS UI
Gothic. The later have the Latin range proportional, the first one has the
Latin range fixed width but I suspect these are really the same font with
different spacing.
There is also MS Mincho (and MS PMincho with proportional Latin). This differs
form Gothic in the style of the Japanese glyphs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39406
Bug ID: 39406
Summary: LabVIEW 2014: Errors during installation block the
process (continue to accept them)
Product: Wine
Version: 1.7.52
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: zat_xorg(a)hotmail.com
Distribution: ---
Created attachment 52522
--> https://bugs.winehq.org/attachment.cgi?id=52522
Backtrace file of error during installation
LabVIEW 2014: Installer finishes, but with error popups during the process (you
have to accept in order to complete the installation)
http://www.ni.com/download/labview-development-system-2014/4735/en/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40898
Bug ID: 40898
Summary: Mass Effect (Steam) has no sounds with native OpenAL
(except for cutscenes)
Product: Wine
Version: 1.9.13
Hardware: x86
URL: http://store.steampowered.com/app/17460/
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
CC: aeikum(a)codeweavers.com
Distribution: ---
Created attachment 54990
--> https://bugs.winehq.org/attachment.cgi?id=54990
audio debug log
(+tid,+seh,+mmdevapi,+winmm,+driver,+msacm,+midi,+dsound,+dsound3d,+xaudio2,+xapofx,+dmusic,+mci,+pulse,+alsa,+timestamp)
The problem sounds similar to bug #40833: audio works in the cutscenes, intro
videos, but not in the menus and in the main game.
The differences are:
- Mass Effect doesn't make use of Xaudio/Xaudio2 but Openal (the game comes
bundled with native openal32.dll and wrap_oal.dll)
- the proposed patch from bug #40833 doesn't fix the problem.
I reproduced the problem with ALSA and Pulseaudio as well.
Possible workarounds:
- force Wine to use the built-in openal32. Audio works with that (the game
recognizes the audio device as 'Generic Software').
- when using the native openal32, edit BIOEngine.ini and change the line in
section [ISACTAudio.ISACT.AudioDevice]
DeviceName = Generic Software
For some reason, the game always tries to use 'Hardware acceleration' for sound
when using native openal32.dll that comes with the game.
FWIW, audio used to work in the game before
commit 7d6c6025923c039ac6a2458ca466290621238c36
Author: Andrew Eikum <aeikum(a)codeweavers.com>
Date: Fri Oct 2 09:02:56 2015 -0500
openal32: Prefer native version.
Because openal contexts are global per-process, applications that use
openal will conflict with Wine DLLs that use openal like xaudio2_7 now
does. Windows does not ship an openal32, so all applications that use
openal will ship their own copy of it. According to Chris Robinson,
Windows native openal32 works fine in Wine, so we should just use that
to avoid the problem.
Fedora 24 x86_64
Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
Pulseaudio 8.0 / Alsa 1.1.1
openal-soft-1.17.2
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19433
Summary: Command & Conquer Generals network fails mid-game
(mismatch in synchronization data)
Product: Wine
Version: 1.1.25
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kakuremura(a)gmail.com
Using the workaround mentioned in bug 17737, multiplayer still fails. You can
connect, you can start the game and you can play for a while, but after the
first contact with the enemy (after a few kills) a message pops up "mismatch in
synchronization data".
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23807
Summary: Natural Selection 2 black screen on launch: format
unrecognized(909198916)
Product: Wine
Version: 1.2
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: scott(a)open-vote.org
The game is currently alpha software, however this part breaks specifically on
Wine and not Windows. On launching the game I hear sound but get a black
screen. These two messages repeat a lot,
fixme:d3d:debug_d3dformat Unrecognized 909198916 (as fourcc: DF16)
WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(909198916) in the
format lookup table
afterwards, this repeats a lot:
err:d3d:IWineD3DDeviceImpl_UpdateSurface >>>>>>>>>>>>>>>>> GL_INVALID_OPERATION
(0x502) from glCompressedTexSubImage2DARB @ device.c / 5332
Attached is a +d3d trace of a clean wineprefix running the game
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25329
Summary: Divinity II demo fails to start gameplay screen unless
I winetricks wmp9
Product: Wine
Version: 1.3.8
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: shannon.vanwagner(a)gmail.com
Divinity2 demo starts to character creation but won't launch gameplay. So after
installing winetricks wmp9, the introductory videos play and the game runs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26269
Summary: BioShock 2: Loss of keyboard input on loading screen
Product: Wine
Version: 1.3.14
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mgavl69(a)juno.com
Created an attachment (id=33488)
--> (http://bugs.winehq.org/attachment.cgi?id=33488)
trace +keyboard
On the inital 'New Game' loading screen you cannot use the space bar to
continue.
Keyboard and mouse input is recognised correctly when adjusting settings in the
menus.
Wine version 1.3.14-git
Xserver v1.10.0
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29582
Bug #: 29582
Summary: Star Wars Battlefront (I and II) "Loading" screen very
slow.
Product: Wine
Version: 1.3.36
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: daniel.santos(a)pobox.com
Classification: Unclassified
The "Loading" screen takes so long (in SW Battlefront II) that I can't connect
to network games because when it finally finishes loading the level, I get a
message that says "lost connection to host" (presumably because it timed out).
I haven't timed it, but it seems to be about 2 minutes, whereas running it on
windows takes roughly 5-10 seconds.
WINEDEBUG=+relay did show that PeekMessageA was being called about 2700 times a
second (probably not a big deal) but then GetForgroundWindows was being called
right after that (a wineserver call). I suspected that as a possible culprit,
but haven't dug in too deeply yet.
I'll do some profiling on this later and try to get some better info. Maybe I
can find a hack-around to positively isolate the cause.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31046
Bug #: 31046
Summary: Wine advertises 32bit depth buffer, behaves like 24bit
Product: Wine
Version: 1.5.7
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: billy65bob(a)gmail.com
Classification: Unclassified
Created attachment 40757
--> http://bugs.winehq.org/attachment.cgi?id=40757
title screen: 32-bit Z buffer on wine (DirectX9 Hardware)
Title says it all really.
I'm currently playing a game in PCSX2 (Persona 4) and frankly it looks really
bad.
According to the application, wine is reporting a 32bit Z-buffer, but amusingly
it behaves precisely how a 24bit buffer behaves in windows with this
application.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29985
Bug #: 29985
Summary: Joystick (DragonRise Inc. Generic USB Joystick)
incorrect setting in analog.
Product: Wine
Version: 1.4-rc4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fael_mc(a)msn.com
Classification: Unclassified
Created attachment 39035
--> http://bugs.winehq.org/attachment.cgi?id=39035
Pictures to explain better
Greetings
I have a very good experience with games in wine, but there is a bug with my
joystick, which disturbs some games.
I have a PS2 joystick style (DragonRise Inc. Generic USB Joystick) very popular
here in where I live, work and usually no problem with native linux games.
In wine, almost everything works normally, it recognizes, and works in all
games. But there is a problem with the axes of the analog.
In Games, I set up the axes of analog, such as "Pro Evolution Soccer 5"
everything is right.
But some games you can not configure the axes - Example "GTA San Andreas."
The problem is with the analog number 2 in the GTA is the camera, only works up
and down, left and right does not work, the function of the left and right
analog camera is in paragraph 1, which is normal, but beyond move to "CJ" also
moves the camera to the left and right.
"San Andreas" is just one example, this same problem hap wine in all games that
use analog 2.
To explain the problem better, I am attaching a zip file with two photos
The first is a photo of the joystick, and a second drawing I made to explain
the problem better.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39436
Bug ID: 39436
Summary: Gta Vice City - the black screen while playing clip at
the game start
Product: Wine
Version: 1.7.52
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: geeronzero(a)gmail.com
Distribution: ---
Gta Vice City - the black screen while playing clip at the game start. The is
music in it, but no image.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19816
Summary: Enhancement request: MSVBVM60
Product: Wine
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bammzilla(a)astronomy.com.ph
I would like to request that Wine have its own built-in version of MSVBVM60. I
don't know how difficult it would be, but since WinXP has it by default I would
love Wine to have it as well.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31786
Bug #: 31786
Summary: Run the tests on real hardware
Product: Wine-Testbot
Version: unspecified
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
Classification: Unclassified
It would be very useful to run some tests on real hardware.
* This is the case for all the 3D graphics tests. For these we would even want
to run them on both AMD and NVidia graphics cards(*). Currently they are
essentially ignored by WineTestBot because the virtual graphic cards don't
provide meaningful 3D support.
* It could somewhat be useful for sound tests too, mostly to avoid timing
issues, but also to ensure the results we get are not tainted by bugs in the
emulated sound card. Also emulated sound cards typically don't support MIDI
emulation.
The problem is that it's very important to limit the test duration and to
restore the test environment to a clean state after each test, no matter what
happens, for two reasons:
* Because it's not uncommon for tests to have side effects and for them to
leave the test environment in an unusable state. Granted it happens much more
often with older Windows releases as they are more prone to crashes. However
graphics drivers also tend to be buggy and we would not want the tests to be
tainted by a previous run (though a reboot should take care of most issues).
* But also the Wine TestBot runs anything that gets posted by anonymous users
on wine-patches. That's ok as long as such code is properly confined and not
allowed to run for too long. That supposes thoroughly cleaning up the
environment after a test has run, including anything that could happen at boot
time.
Virtual machines provide a simple solution to both of these issues which is why
the TestBot relies on them heavily.
With QEmu it's possible to let the guest OS access some peripherals directly
via the 'passthrough' mode. This is normally done for network cards. If it
worked for graphics cards that would be a great solution but it's not clear
that it's feasible.
Another option would be to play tricks with Grub scripts: have it boot from a
clean Linux partition (or from the network?), restore the Windows partition
from a clean disk image, reboot into that partition, and back on the clean
partition with the next reboot. That still leaves the issue of forcing a reboot
in case of a freeze or malware taking control of Windows (use a remote
controlled power switch like in data centers?).
(*) We currently have two such machines ready for this:
http://www.winehq.org/pipermail/wine-devel/2012-February/094080.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33912
Bug #: 33912
Summary: Remove All Wine Home Content - Button
Product: Wine
Version: 1.6-rc4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: moceap(a)hotmail.com
Classification: Unclassified
This enhancement what I require that a button not remove only .wine folder in
home , also delete all installed-by-wine-application desktop integration files
Such as ::
$HOME/.local/share/mime/packages/wine*
$HOME/.local/share/applications/wine*
And others .
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41668
Bug ID: 41668
Summary: wineboot mishandles user dir symlinks during update
Product: Wine
Version: 1.9.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
Assignee: wine-bugs(a)winehq.org
Reporter: galtgendo(a)o2.pl
Distribution: ---
In a standard wine prefix 'Desktop', 'My Documents', etc. are symlinks to
${HOME}.
As are their localized versions.
I consider the first a wrong choice and and make those normal dirs in the
prefix; as for the second, I turn those into symlinks to their English
counterparts.
Yet...
Upon 'wineboot' at each wine update, while the English dirs stay untouched, the
localized symlinks get reset into ${HOME} symlinks.
If it's WAD, it's a misfeature; otherwise, it's a bug.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10729
Summary: Clicking things in-game in LEGO Island causes game to
hang
Product: Wine
Version: 0.9.50.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: echidnaman(a)gmail.com
Created an attachment (id=9571)
--> (http://bugs.winehq.org/attachment.cgi?id=9571)
Console log
Once you get in-game in LEGO Island, clicking things will print a few fixme and
then hang indefinitely. A console log is attached, and notes where the fixmes
coinciding to the hang are.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42444
Bug ID: 42444
Summary: Dualshock 3 does not map correctly
Product: Wine
Version: 2.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: haakobja(a)gmail.com
Distribution: ---
Created attachment 57282
--> https://bugs.winehq.org/attachment.cgi?id=57282
DS3 events
Hi,
I've tried using a dualshock 3 controller with wine, but I'm unable to get the
analogous triggers to work. They seem to be mapped as buttons, not analogue
input.
If I use xboxdrv the triggers are mapped correctly, but then force feedback
does not work. Because of this, I think it would help if the wine-mapping was
correct.
I've earlier tried asking on the forum, but it does not seem like anyone know
how to map the controller correctly. I use the controller using events, not the
legacy joystick interface in Linux.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13616
Summary: Screenserver starts while playing with Joypads
Product: Wine
Version: 1.0-rc2
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: trevi55(a)gmail.com
I don't exactly know if this is an issue related to GNOME or wine, but when I
play a game using a joystick - after few minutes - the gnome screensaver starts
so I've to move the mouse to continue...
Shouldn't wine block the screensaver launching if it is getting data from
/dev/input/js*?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32942
Bug #: 32942
Summary: Metal Gear Solid 2 Substance Internal errors
Product: Wine
Version: 1.5.23
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: levanchelidze(a)gmail.com
Classification: Unclassified
Created attachment 43497
--> http://bugs.winehq.org/attachment.cgi?id=43497
outputs
Metal Gear Solid 2 Substance Internal errors
Game installed with no problem but the game did not load
here is outputs and a screenshot
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33858
Bug #: 33858
Summary: FarCry 3 needs "4gb_patch" to run properly
Product: Wine
Version: 1.6-rc3
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: berillions(a)gmail.com
Classification: Unclassified
Created attachment 44910
--> http://bugs.winehq.org/attachment.cgi?id=44910
Crash Medium/Ultra settings without 4gb_patch
Hi,
Even if they are the same crash log about msvcr100, this workaround does not
works for the bug #32500.
4gb_patch is a tool which allow to have 4GB of virtual memory for a x86
executable instead of 2GB. See her website :
http://www.ntcore.com/4gb_patch.php
For my test, i play twice at FC3 without apply the patch to attach their
bugreport.
Laptop Caracteristics :
- Nvidia GTX670MX
- Intel Core I5
- Debian Unstable 64Bits
- Nvidia drivers 319.17
- Wine 1.6-rc3
- 32bits clean wineprefix
--- Test #1 (Medium Settings) ---
I launch FarCry 3 with these graphic options :
- Texture = Medium
- Ambient Lighting = Medium
- Shadow = Low
- Post FX = Low
- Geometry = Medium
- Vegetation = Medium
- Terrain = Medium
- Water = Medium
- Environment = Medium
Result : With these graphic options, the game crashed after 10 minutes when i
drove a car. This crash appears during the loading too.
--- Test #2 (Very High Settings) ---
I launch FarCry 3 with these graphic options :
- Texture = High
- Ambient Lighting = High
- Shadow = Ultra
- Post FX = Ultra
- Geometry = Ultra
- Vegetation = Very High
- Terrain = High
- Water = Very High
- Environment = High
Result : the game crash quickly during the first loading when i want to load my
savegame.
I attach only one log for these two tests because it's the same crash for both.
--- Test #3 (Very High Settings) ---
Same graphic settings than test #2 but i patched farcry3.exe with the 4gb_patch
tool.
Result : No crash after 25 minutes
-------
Thanks,
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35378
Bug ID: 35378
Summary: Metal Gear Rising: Revengeance crashes when change
settings
Product: Wine
Version: 1.7.10
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Classification: Unclassified
Created attachment 47183
--> http://bugs.winehq.org/attachment.cgi?id=47183
log+backtrace
Game crashes immediately, when you change settings as example, a screen
resolution or game mode from Windowed to a Fullscreen. Workaround is to use
'GLSL disabled'.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36514
Bug ID: 36514
Summary: MCIWndCreate does not create a child window if parent
is specified
Product: Wine
Version: 1.7.19
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msvfw32
Assignee: wine-bugs(a)winehq.org
Reporter: nicode(a)gmx.net
WS_CHILD is commented out in the default style for MCIWnd child windows (parent
window specified). But it should be included.
At least one application (King's Quest: Mask of Eternity) depends on the
documented API behavior.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34348
Bug #: 34348
Summary: Wine xrandr12 failure
Product: Wine
Version: 1.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wolterh6(a)gmail.com
Classification: Unclassified
Every time I run an application through wine, I get the terminal output I
attach to this bug. This prevents most applications from even running at all.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34752
Bug #: 34752
Summary: Rising Kingdoms Demo: the menu is heavily distorted
Product: Wine
Version: 1.7.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winebugs140(a)gmail.com
Classification: Unclassified
Created attachment 46336
--> http://bugs.winehq.org/attachment.cgi?id=46336
RK Log
Different menu elements are rearranged and multiplied. When you move the mouse,
the menu changes in various ways.
Tested with:
Windows Vista (without Wine), GeForce 9600M GS--the program works fine here
Ubuntu 13.04, GeForce 9600M GS (NVIDIA driver 313)
Mac OS X 10.7.5, ATI HD 2600 Pro, Mac Driver/X11
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25431
Summary: Wine shouldn't change the gamma value
Product: Wine
Version: 1.3.8
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: incarus6(a)googlemail.com
Some games (like Shaya http://shaiya.aeriagames.com/ ) can change the gamma
value (I don't know how exactly, but it have the same effect as using the
xgamma command in Linux). When you play in windowed mode (or with dual-screen)
it is really annoying (and causing eyestrain) when the gamma value is too high.
There should be an option to disable the possibility for games and software to
change the gamma value.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38385
Bug ID: 38385
Summary: Visual Studio Express 2013 for Windows can't install
Product: Wine
Version: 1.7.40
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: litimetal(a)gmail.com
Distribution: ---
Created attachment 51232
--> https://bugs.winehq.org/attachment.cgi?id=51232
terminal output.txt
0. download from http://go.microsoft.com/?linkid=9832256
$ sha1sum winexpress_full.exe
52e551bf9ab3a587c5ec0f9dbaad49ffb5e5d168 winexpress_full.exe
1. wine winexpress_full.exe
2. The installer aborted silently
winetricks -q dotnet40 might be a workaround
I tried to WINEDEUBG=+mscoree, but in this situation, wine just hangs
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38016
Bug ID: 38016
Summary: DevExpress XtraBars BarAndDockingController needs
Win32.SystemEvents.InvokeOnEventsThread
Product: Wine
Version: 1.7.34
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: utinomen(a)gmail.com
Distribution: ---
Created attachment 50657
--> https://bugs.winehq.org/attachment.cgi?id=50657
Stack Trace
Trying to run a Windows App that uses a DevExpress toolchain with native Wine
and Mono (using the wine-mono4.5.4 package in Ubuntu). The InvokeOnEventsThread
does not seem to be implemented in Mono, judging by:
http://www.projky.com/mono/3.2.3/microsoft/Win32/SystemEvents.cs.html
Apologies if this is not the right place to file such a report, but it would be
nice to know if there are any plans to accommodate these functions?
A stack trace is attached if you wish to confirm my analysis.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33889
Bug #: 33889
Summary: Worship Assistant 5.2
Product: Wine
Version: 1.6-rc3
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dsreyes1014(a)gmail.com
Classification: Unclassified
Specs:
-Linux Mint Mate
-x86_64
-wine-1.6rc3
-latest winetricks
My problem is with a program called Worship Assistant version 5.2. The
requirements for the program is .NETFramework 2.0 which seems to install fine
with the version of wine and winetricks I provided above. The program installs
and runs ok but when I go to print anything it shows dialog with options to
continue or quit the program. The attachment is the contents of the dialog
details area. Any ideas?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40142
Bug ID: 40142
Summary: BattleField 2 - JpegDecoder
Product: Wine
Version: 1.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: levanchelidze(a)gmail.com
Distribution: ---
Created attachment 53642
--> https://bugs.winehq.org/attachment.cgi?id=53642
Terminal output
I am trying to start BF2
I downloaded it from this project page
https://battlelog.co/
However when I try to start the launcher I get an error massage
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41391
Bug ID: 41391
Summary: N1MM+ Logger crashes when trying to configure macro on
the Digital Interface Soundcard window.
Product: Wine
Version: 1.9.19
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: landon(a)mccordscvs.com
Distribution: ---
Created attachment 55746
--> https://bugs.winehq.org/attachment.cgi?id=55746
3 Exceptions, Execution and Preformance Tracing, and Backtrace
Installed is the Latest version of N1MM+ Logger currently 1.0.5924.
Ubuntu 16.04
If you right click on one of the white unconfigured Macro Buttons at the bottom
of the Digital Interface Soundcard window the program will throw an exceptions.
(There are 24 of these buttons.) The program should open the Digital Setup
window.
When the program throws the exceptions it dose not usually crash. It normally
throws 3 exceptions. If you dismiss these the program can be used like normal.
But the macros still cannon be configured.
The Backtrack I included happened when I tried to copy and paste the errors.
Don't know if its relevant.
If you want to install program for troubleshooting you will need to configure a
setting to get Digital Interface Soundcard window up. Goto Config->Configure
Ports, Mode .... Click on the Digital Modes tab and set Digital Interface 1 TU
Type to Soundcard. Click Ok. Then click Window->Digital Interface. To open
window in question.
Attached are the 3 exceptions throwed by the program. Program Execution and
performance tracing and the Backtrace that was caused by trying to copy and
paste the error.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42482
Bug ID: 42482
Summary: ONE-POS crashes when print previewing a Crystal Report
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sanford.poon(a)gmail.com
Distribution: ---
Created attachment 57338
--> https://bugs.winehq.org/attachment.cgi?id=57338
error output from WINE (crash.log) and JIT crash logs (crashJIT.log)
Version 3.1.9.14 of the Freeware POS software (available for download after
free registration of an account at
https://hk.one-pos.com/download/member/setup.zip) installs and runs properly in
Lubuntu 16.10 on wine 2.1 and wine-gecko 2.21 with winetricks -q dotnet452 wmp9
jet40 mdac28 cjkfonts
Run with LC_ALL=zh_TW.UTF8 for proper display of Chinese characters, but
English interface works without this.
Access the analysis report function from the left menu and select any of the
available reports to open a print preview window, then the application crashes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32767
Bug #: 32767
Summary: Word 2003 shows a document incorrectly
Product: Wine
Version: 1.5.22
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
Classification: Unclassified
Created attachment 43259
--> http://bugs.winehq.org/attachment.cgi?id=43259
Test file
See test file. It doesn't show a bg image and some lines, showing only two
lines of all.
If I select gdiplus as native,builtin, it works almost OK (with a little
glitch).
I'll attach screenshots.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21114
Summary: Chessbase products - antialiasing has no effect
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jskartman(a)gmail.com
When turned on antialiasing the pieces are draw with the same quality as of
antialiasing off. The antialiasing has no effect.
You can use chessbase light to test.
http://www.chessbase.com/DOWNLOAD/cblight/index.asp
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35648
Bug ID: 35648
Summary: Anthem Room Correction 2 v1.0.1: crash when connecting
to A/V receiver in auto mode
Product: Wine
Version: 1.7.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tristan.schmelcher(a)gmail.com
Created attachment 47607
--> http://bugs.winehq.org/attachment.cgi?id=47607
Console output
The application Anthem Room Correction 2 v1.0.1 crashes when trying to connect
to an A/V receiver if run in automatic mode (with "/Auto" specified on the
command line). The application also fails in manual mode at the same spot, but
it doesn't crash; instead it hangs with 100% CPU usage.
The console output with stack trace from the crash in automatic mode is
attached.
The application can be downloaded at
http://anthemav.com/downloads/ARC-2%20Setup.zip, but you must have an Anthem
A/V receiver in order to get this far in it. I am happy to carry out suggested
testing/debugging.
74dc2107ca936dddbd0fc6abbb2baf74e387c163 ARC-2 Setup.zip
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=36509
Bug ID: 36509
Summary: valgrind shows a potential leak in
mscoree/tests/debugging.c
Product: Wine
Version: 1.7.19
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
../../../tools/runtest -q -P wine -T ../../.. -M mscoree.dll -p
mscoree_test.exe.so debugging && touch debugging.ok
preloader: Warning: failed to reserve range 00110000-68000000
preloader: Warning: failed to reserve range 7f000000-82000000
/bin/sh: /usr/bin/egrep: No such file or directory
==9100== Find PDB file: /tmp/valgrind_petmp9100_2afae468 is empty
==9100== Warning: Missing or un-stat-able
/home/austin/.wine-valgrind/drive_c/windows/mono/mono-2.0/bin/libmono-2.0-x86.pdb
fixme:mscoree:CorDebug_Initialize stub 0x4aa1808
==9100== 52 bytes in 1 blocks are possibly lost in loss record 296 of 646
==9100== at 0x7BC4C6DF: notify_alloc (heap.c:255)
==9100== by 0x7BC50F23: RtlAllocateHeap (heap.c:1716)
==9100== by 0x62F2004: ???
==9100== by 0x62F4544: ???
==9100== by 0x62F4F5D: ???
==9100== by 0x62F9A9F: ???
==9100== by 0x4CA2FF1: test_createDebugger (debugging.c:450)
==9100== by 0x4CA3237: func_debugging (debugging.c:488)
==9100== by 0x4CA76F6: run_test (test.h:584)
==9100== by 0x4CA7AE5: main (test.h:654)
==9100==
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33406
Bug #: 33406
Summary: Archicad 15 selection fence and marquee doesn't show
correctly
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xsitian(a)gmail.com
Classification: Unclassified
Created attachment 44201
--> http://bugs.winehq.org/attachment.cgi?id=44201
screenshot compare for selection fence
Archicad 15 selection fence and marquee doesn't show correctly when use wine
buildin gdiplus.dll. If use windows native gdiplus.dll, it works correctly.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32310
Bug #: 32310
Summary: EVEMon needs
System.Net.NetworkInformation.NetworkChange
implementation
Product: Wine
Version: 1.5.18
Platform: x86
URL: http://evemon.battleclinic.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Classification: Unclassified
To reproduce, install EVEMon without .NET, and try to run it.
It crashes on startup with an exception:
System.EntryPointNotFoundException: CreateNLSocket
at (wrapper managed-to-native)
System.Net.NetworkInformation.NetworkChange:CreateNLSocket ()
at System.Net.NetworkInformation.NetworkChange.EnsureSocket () [0x00000] in
<filename unknown>:0
at System.Net.NetworkInformation.NetworkChange.Register
(System.Net.NetworkInformation.NetworkAvailabilityChangedEventHandler d)
[0x00000] in <filename unknown>:0
at System.Net.NetworkInformation.NetworkChange.add_NetworkAvailabilityChanged
(System.Net.NetworkInformation.NetworkAvailabilityChangedEventHandler value)
[0x00000] in <filename unknown>:0
at EVEMon.Common.Net.NetworkMonitor.Initialize () [0x00000] in <filename
unknown>:0
at EVEMon.Common.EveMonClient.Initialize () [0x00000] in <filename unknown>:0
at EVEMon.Program.Main () [0x00000] in <filename unknown>:0
CreateNLSocket is an entry point into the MonoPosixHelper library. AFAICT it's
only implemented on Unix-like systems and would not be possible to implement on
Windows. So we need an alternative implementation of
System.Net.NetworkInformation.NetworkChange that's based on the Windows API.
Probably the NotifyAddrChange function could be used to detect changes, using
System.Threading.AutoResetEvent and ThreadPool.RegisterWaitForSingleObject to
get the event notification into the .NET world.
I think this would be a good introduction to Mono development, if anyone needs
one.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33690
Bug #: 33690
Summary: Microsoft SQL Server 2005 Express Edition: installer
window layout incorrect with builtin mono
Product: Wine
Version: 1.5.31
Platform: x86
URL: http://go.microsoft.com/fwlink/?linkid=65212
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
Created attachment 44606
--> http://bugs.winehq.org/attachment.cgi?id=44606
left is wine mono, right is native .NET
After fixing bug #33513, the installer displays another set of windows. There
are some problems with their layout:
- the initial size of the windows is different than when using native .NET. As
a result there's a gap between the interface elements and the right window
border, and some buttons on the bottom of the window are only partially
visible. Resizing the window does not unhide them.
- Label text does not wrap, it is clipped instead.
- also, the focus rectangle on buttons looks different.
Attaching screenshot showing the same windows with and without winetricks
dotnet20.
Prerequisites:
winetricks mspatcha
fix for bug 33513
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42442
Bug ID: 42442
Summary: Canon Digital Photo Professional 4.5 can't start
Product: Wine
Version: 2.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: eneeen(a)gmail.com
Distribution: ---
Created attachment 57274
--> https://bugs.winehq.org/attachment.cgi?id=57274
console log from dpp startup
This is bug report related to:
https://bugs.winehq.org/show_bug.cgi?id=42423
I couldn't select wine-mono as component, but as @Dmitry Timoshkov stated it's
wine-mono related.
I've attached startup log from console, as there is no error message in GUI.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23192
Summary: 2D graphics in Mathematica are not antialiased while
on Windows they are
Product: Wine
Version: 1.2-rc2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
To see this, try Plot[Sin[x],{x,-10,10}] in Windows and in Wine. Output in
Windows is antialiased while in wine it's jagged.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40810
Bug ID: 40810
Summary: Semcad X Verision 14 (64bit): crashes when opening a
2D plot
Product: Wine
Version: 1.9.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: andreas.christ(a)runbox.com
Distribution: ---
I am trying to make Semcad X Version 14 run under wine64. This is a CAD program
for electromagnetic simulations.
The program installs, and most features seem to work. When viewing a simulation
result in a xy-plot window, Semcad X crashes with an error in a
gdiplus-function.
My system configuration is:
Wine build: wine-1.9.12 (Staging)
Platform: x86_64
Version: Windows XP
Host system: Linux
Host version: 4.5.0-0.bpo.2-amd64
Graphics driver: Nvidia 340.96
I first installed Semcad X using Wine 1.8 from the Jessie-backports and tried
with wine staging, but the crash in gdiplus I get seems to be the same. I made
sure gecko and mono were installed in Wine 1.8. (Wine staging upgraded them
when first starting the prefix with it.) I also installed the core fonts (later
all fonts) and vcrun2010 using winetricks. I also tried the native gdiplus
(64bit version), which also crashed.
When viewing a simulation result in the xy-viewer, the viewer window opens, and
the graph is drawn, but the window area where the text (axis labels) should
show up remains black. After a few seconds (or when clicking into the black
area), Semcad X crashes with the attached bug report.
In the terminal, the following messages show up before the crash (just pasting
in two of them):
fixme:gdiplus:units_to_pixels Unhandled unit type: 15
fixme:font:freetype_SelectFont Untranslated charset 105
The unit type and charset numbers vary.
The program is not available for free download and requires a special license
to run. Reproducing the error may therefore not be possible. Nevertheless, I
would greatly appreciate any support.
Andreas
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35680
Bug ID: 35680
Summary: Impossible to run DVDVideoSoft Free YouTube to MP3
Converter
Product: Wine
Version: 1.7.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: thomthomthom(a)ymail.com
It's impossible to run DVDVideoSoft Free YouTube to MP3 Converter.
Output:
$ wine FreeYouTubeToMP3Converter.exe
Unknown heap type: #GUlD
Unknown heap type: #Blop
Unhandled Exception:
System.TypeLoadException: Could not load type 'FreeAllDownload.Main' from
assembly 'FreeYouTubeToMP3Converter, Version=3.12.26.224, Culture=neutral,
PublicKeyToken=1f9a51e1f0f27a9a'.
at <PrivateImplementationDetails>{9294DE1F-C5EC-46B6-AD3E-640AF3B83387}.Main
() [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.TypeLoadException: Could not load
type 'FreeAllDownload.Main' from assembly 'FreeYouTubeToMP3Converter,
Version=3.12.26.224, Culture=neutral, PublicKeyToken=1f9a51e1f0f27a9a'.
at <PrivateImplementationDetails>{9294DE1F-C5EC-46B6-AD3E-640AF3B83387}.Main
() [0x00000] in <filename unknown>:0
It's a clean .wine directory. No winetrick or something else ...
Thanks.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39455
Bug ID: 39455
Summary: Homeport crashes on execution
Product: Wine
Version: 1.7.52
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: axel.braun(a)gmx.de
Distribution: ---
Created attachment 52569
--> https://bugs.winehq.org/attachment.cgi?id=52569
Error log
Homeport is a software that can be downloaded for free from Garmin:
https://buy.garmin.com/en-US/US/prod64242.html
Installation works fine, but when the software is run, it crashes immediately
(see attachment)
Installed wine components on openSUSE 13.1
docb@T520:~> rpm -qa |grep wine
wine-32bit-1.7.52-486.1.x86_64
wine-gecko-2.40-49.1.noarch
wine-mono-4.5.6-5.1.noarch
wine-1.7.52-486.1.x86_64
wine-mp3-1.1.39-13.13.i586
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27197
Summary: Russian Fishing game not starting
Product: Wine
Version: 1.3.20
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sir-lexa(a)yandex.ru
Russian Fishing game not starting. It just says:
fixme:mscoree:get_runtime_info unsupported startup flags 2
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37337
Bug ID: 37337
Summary: chem3d wont start
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tedwaltmuf(a)yahoo.com
Created attachment 49651
--> https://bugs.winehq.org/attachment.cgi?id=49651
here is the last run log
my copy of chem3d wont start. i used winetricks for the dlls that were missing
according to the run.log
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26020
Summary: Miner Wars Demo: crashes on startup
Product: Wine
Version: 1.3.13
Platform: x86
URL: http://www.fileplanet.com/218230/210000/fileinfo/Miner
-Wars-Demo
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
austin@aw21 ~/.wine/drive_c/Program Files/Miner Wars $ wine
MinerWarsLauncher.exe
Unhandled Exception: System.ArgumentException: invalid utf-16 sequence at
3340336 (missing surrogate head)
Parameter name: string
at (wrapper managed-to-native) System.Type:internal_from_name
(string,bool,bool)
at System.Type.GetType (System.String typeName) [0x00000] in <filename
unknown>:0
at .. (System.String ) [0x00000] in <filename unknown>:0
at .. (Int32 ) [0x00000] in <filename unknown>:0
. (System.String[] ) [0x00000] in <filename unknown>:0
Also exhibits bug 25192.
Appears to be a mono bug. If I use dotnet20 instead of mono28, app starts up.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24190
Summary: Playon installer fails
Product: Wine
Version: 1.3.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ead1234(a)hotmail.com
Created an attachment (id=30453)
--> (http://bugs.winehq.org/attachment.cgi?id=30453)
console output
The installer for Playon fails. First it informs me to install mono to run .NET
executables, after installing mono it still fails with an msi error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36797
Bug ID: 36797
Summary: Overwolf Installation doesn't open a window.
Product: Wine
Version: 1.6.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jonaharagon(a)mcweb.us
Created attachment 48870
--> http://bugs.winehq.org/attachment.cgi?id=48870
Error log
The Overwolf installer
(http://appdb.winehq.org/objectManager.php?sClass=version&iId=30064) does not
even get to opening an installation window before it crashes. A log from the
console will be attached. I'm not sure if it's a problem with installations on
my host machine, and if I should reset the wineprefix or if it's a problem with
the executable. If anyone has any insight to what the error log means, that
would be great.
I am installing from the official source (www.overwolf.com/download)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33728
Bug #: 33728
Summary: Microsoft SQL Server 2005 Express Edition: installer
window layout incorrect with builtin mono
Product: Wine
Version: 1.5.31
Platform: x86
URL: http://go.microsoft.com/fwlink/?linkid=65212
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
After fixing bug #33513, the installer displays another set of windows. Once
the installer visits these windows, it does not exit cleanly, i.e. after
cancelling the installation the installer process keeps hogging the CPU.
Attachment 44606 contains the screenshots of the windows to look for. Bug
affects only MONO, the installer exits just fine with native .NET.
Prerequisites:
winetricks mspatcha
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35209
Bug ID: 35209
Summary: application crash (SMA Sunny Explorer 1.06.17)
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: klaus.hader(a)bnv-bamberg.de
Classification: Unclassified
Created attachment 46961
--> http://bugs.winehq.org/attachment.cgi?id=46961
backtrace generated when starting the application
SMA Sunny Explorer 1.06.17 crashes during application startup
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41999
Bug ID: 41999
Summary: Windows SDK for Windows 7 installation fails with
"Byref marshalling of delegates is not implemented"
Product: Wine
Version: 2.0-rc1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fjfrackiewicz(a)gmail.com
Distribution: ---
Created attachment 56424
--> https://bugs.winehq.org/attachment.cgi?id=56424
Wine 2.0-rc1 terminal output
When attempting to install the Windows SDK for Windows 7 in a clean prefix, the
installation fails with "Byref marshalling of delegates is not implemented".
Terminal output attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28978
Bug #: 28978
Summary: Statistica 10 trial crash during instalation
Product: Wine
Version: 1.3.31
Platform: x86
URL: http://www.statsoft.cz/file1/STATISTICA_TRIALV10CZ.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pavel.ondracka(a)gmail.com
Classification: Unclassified
Created attachment 37268
--> http://bugs.winehq.org/attachment.cgi?id=37268
terminal output
During Statistica 10 trial installation there is a crash in rundll32.exe and
installer program finish unsuccessfully. winetricks mono210 is required.
Sorry about the download program in Czech language, haven't found any english
version. However its really easy to reproduce, just run the exe file and wait
for crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38428
Bug ID: 38428
Summary: Install wizard for Fuji film PC Autsave crashes during
install
Product: Wine
Version: 1.6.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: phil.montaigu(a)cegetel.net
Distribution: ---
Created attachment 51284
--> https://bugs.winehq.org/attachment.cgi?id=51284
Crash of install wizard
Install wizard for Fuji film PC Autsave crashes during install. Backtrace
saving and bug report proposed. Wizard windows says "successfull" click
"finish".
In .wine/dosdevices/c:/Program Files (x86)/FUJIFILM/FUJIFILM PC AutoSave/
trying to launch Fiji manager .exe, same type of crash.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37998
Bug ID: 37998
Summary: Wine-mono: Type.GetType("Mono.Runtime", false) is not
null, confuse runtime detection code like NUnit
Product: Wine
Version: 1.7.35
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: fracting(a)gmail.com
Distribution: ---
In NUnit, src/NUnitCore/interfaces/RuntimeFramework.cs,
the application use `Type monoRuntimeType = Type.GetType("Mono.Runtime",
false); ` to detect C# runtime, wine mono is detected as mono, but wine mono is
not mono, which brings some strange failure later.
On Microsoft .Net Framework, Type.GetType("Mono.Runtime", false) should return
null.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27215
Summary: Capsized fails to launch
Product: Wine
Version: 1.3.20
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: orzechowskid(a)gmail.com
Created an attachment (id=34776)
--> (http://bugs.winehq.org/attachment.cgi?id=34776)
console output (default debug flags)
Capsized, a game purchased through Steam, fails to run. WINE is complaining
about code in the Microsoft XNA Framework which can't be executed by the
Windows version of Mono that the game automatically installed when it ran for
the first time.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42034
Bug ID: 42034
Summary: Photoshop: Incorrect/Missing texts with builtin
gdiplus
Product: Wine
Version: 1.9.23
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: fincer89(a)hotmail.com
Distribution: ---
Created attachment 56508
--> https://bugs.winehq.org/attachment.cgi?id=56508
Layer style window, Photoshop CC 2015, Wine 1.9.23 32-bit (missing texts)
As the title says, with builtin gdiplus many critical texts are not rendered
correctly, tested with Photoshop CC 2015.
If Windows native gdiplus override is used, the texts are rendered correctly
but the program is very unstable to start at all. Crashes may occur multiple
times during the launch sequence. That's why builtin gdiplus may be preferred
since it never crashes the program at startup. As a side effect, this bug is
present and makes usability of the program very troublesome sometimes.
Wine 1.9.23 32-bit prefix.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27030
Summary: iTunes 10.2.2 : Incomplete UI Graphics (Notably Slider
Bars and Partitioners)
Product: Wine
Version: 1.3.15
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: haggisman2005_23(a)hotmail.com
Steps To Reproduce
Install x86 iTunes with Wine under XP mode
Swap to Win7 Mode and run
Decline CD autorun
winetricks riched20 <-- Bypass http://bugs.winehq.org/show_bug.cgi?id=24255
Now you can see from my screenshot what is garbled, slider bars have a
particular problem.
Note: On every startup it will warn you about it not being installed correctly
and have issues with CD mounting. This is a known bug, just hit "ok" and ignore
it. Does not affect this bug being reported.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15796
Summary: Americas Army Deploy Client does not install
Product: Wine
Version: 1.1.6
Platform: PC
URL: http://files.filefront.com/Americas+Army+Deploy+Client+v
123+Installer/;12072120;/fileinfo.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ead1234(a)hotmail.com
Created an attachment (id=16915)
--> (http://bugs.winehq.org/attachment.cgi?id=16915)
console output
America's Army Deploy Client installer fails. Wine states to use mono for .NET
support. After installing MONO for windows and then running the installer wine
crashes due to an unimplimented function mscoree.dll.ClrCreateManagedInstance
and then msi returns an error of err:msi:custom_get_thread_return Invalid
Return Code and the installer states there was an error before installation
completed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21952
Summary: Word 2003: glyphs position in incorrect in embedded
equations
Product: Wine
Version: 1.1.40
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: oleh.nyk(a)gmail.com
Created an attachment (id=26650)
--> (http://bugs.winehq.org/attachment.cgi?id=26650)
formula "++++====----" with builtin gdiplus
Since
commit db3d756c1e4b03b0fb33f2863ab3d2275dcf00c2
Author: Vincent Povirk <vincent(a)codeweavers.com>
Date: Sun Jan 24 15:18:46 2010 -0600
gdiplus: Prefer the builtin version.
both spacing in an Equation formula and its size are wrong (although in a
separate Equation window the formula looks ok, see bug 5264). The normal look
can be restored either by reverting this patch or by setting gdiplus=native in
winecfg. Screenshots with native (good) and builtin (bad) gdiplus are in
attachments.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32964
Bug #: 32964
Summary: FAST Search for Sharepoint MOSS 2010 Query Tool
installer does not start
Product: Wine
Version: 1.5.23
Platform: arm
URL: http://fastforsharepoint.codeplex.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: robert.munteanu(a)gmail.com
Classification: Unclassified
Launching the installer results in just a couple of lines printed on the
console and then the process exists.
$ wine setup.exe
fixme:storage:create_storagefile Storage share mode not implemented.
fixme:iphlpapi:NotifyAddrChange (Handle 0x112e8d0, overlapped 0x112e8dc): stub
wine: configuration in '/home/rmuntean/.wines/sharepoint-query-tool-32' has
been updated.
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:process:SetProcessDEPPolicy (1): stub
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31193
Bug #: 31193
Summary: Google Sketchup Layout crashes on startup
Product: Wine
Version: 1.5.8
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: abe(a)nativetrauma.com
Classification: Unclassified
Created attachment 40961
--> http://bugs.winehq.org/attachment.cgi?id=40961
Layout failed to launch
I am new to Linux so if you are to provide a solution please let me know what
to copy and were and also if it is a .deb fix or not etc.. I seen a fix but
just shows me files and no location to put them in Please provide a how to so i
can follow or supply a link to an auto fix like a deb file please. Meanwhile
Sketchup itself is working great just the layout program keep crashing the
gdiplus.dll was added manually to the
/home/abe/.wine/drive_c/windows/Microsoft.NET/Framework/v2.0.50727 but i might
have missed the explanation I understand the .net and the layout application
are fighting for this and may be the cause but not sure.
following is my system info:
System Info:
System information report, generated by Sysinfo: 7/5/2012 12:37:40 AM
http://sourceforge.net/projects/gsysinfo
SYSTEM INFORMATION
Running Ubuntu Linux, the Ubuntu 12.04 (precise) release.
GNOME: unknown (unknown)
Kernel version: 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC
2012)
GCC: 4.6 (x86_64-linux-gnu)
Xorg: 1.11.3 (07 May 2012 11:43:21PM) (07 May 2012 11:43:21PM)
Uptime: 0 days 13 h 58 min
CPU INFORMATION
AuthenticAMD, AMD Athlon(tm) II X2 255 Processor
Number of CPUs: 2
CPU clock currently at 3100.000 MHz with 1024 KB cache
Numbering: family(16) model(6) stepping(3)
Bogomips: 6200.06
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor
cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse
3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
MEMORY INFORMATION
Total memory: 3010 MB
Total swap: 3069 MB
STORAGE INFORMATION
SCSI device - scsi1
Vendor: ATA
Model: WDC WD15EARS-00Z
SCSI device - scsi5
Vendor: SONY
Model: CDRW/DVD CRX330E
SCSI device - scsi7
Vendor: ZTEMT
Model: Mass storage
HARDWARE INFORMATION
MOTHERBOARD
Host bridge
Advanced Micro Devices [AMD] Family 10h Processor Link Control
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge
PCI bridge(s)
Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
(prog-if 00 [Normal decode])
Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
(prog-if 00 [Normal decode])
Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if
01 [Subtractive decode])
Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
(prog-if 00 [Normal decode])
Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
(prog-if 00 [Normal decode])
Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if
01 [Subtractive decode])
ISA bridge
Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host
controller
Subsystem: Biostar Microtech Int'l Corp Device 3700
IDE interface
Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
(prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3700
GRAPHIC CARD
VGA controller
NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) (prog-if 00 [VGA
controller])
Subsystem: eVga.com. Corp. Device 1529
SOUND CARD
Multimedia controller
NVIDIA Corporation HDMI Audio stub (rev a1)
Subsystem: eVga.com. Corp. Device 1529
NETWORK
Ethernet controller
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast
Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2308
NVIDIA GRAPHIC CARD INFORMATION
Model name: GeForce GT 520
Card Type: PCIe 16x
Video RAM: 2048 MB
GPU Frequency: 270 MHz
Driver version: NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12
16:03:22 PDT 2012
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32745
Bug #: 32745
Summary: TurboTax 2012 installer crashes before start with
wine-mono
Product: Wine
Version: 1.5.21
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: Installer
Severity: enhancement
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Classification: Unclassified
Created attachment 43207
--> http://bugs.winehq.org/attachment.cgi?id=43207
WINE_MONO_TRACE=x WINEDEBUG=mscoree,tid
See also bug 30905 (for TurboTax 2011).
wine-1.5.21-321-g175039e
export WINEPREFIX=~/.wine-tax
wineserver -k
rm -rf $WINEPREFIX
wine TurboTax\ 2012\ Installer.exe
err:seh:setup_exception_record stack overflow 1840 bytes in thread 0042 eip
7bc57a04 esp 00230c00 stack 0x230000-0x231000-0x330000
Note: there are some gdiplus/wincodecs fixme's before this, but native doesn't
help. Just native dotnet40, however, avoids the crash.
WINE_MONO_TRACE=x WINEDEBUG=mscoree,tid attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35498
Bug ID: 35498
Summary: Adobe Lightroom 4.4 - image thumnails disappear
Product: Wine
Version: 1.7.11
Hardware: x86-64
URL: http://www.adobe.com/support/downloads/detail.jsp?ftpI
D=5567
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: robert.munteanu(a)gmail.com
Classification: Unclassified
When there are photos to import, collapsing and then expanding the 'All photos'
block makes all thumbnails but the first one disappear
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35538
Bug ID: 35538
Summary: Adobe Lightroom 4.4 - text for slider values trimmed
for large values
Product: Wine
Version: 1.7.11
Hardware: x86-64
URL: http://www.adobe.com/support/downloads/detail.jsp?ftpI
D=5567
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P3
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: robert.munteanu(a)gmail.com
Classification: Unclassified
Text for numeric slider values only accomodates 3 digits, e.g. 973. 1008 is
trimmed and only 008 is visible. To reproduce, navigate to the Web tab and
change Output Settings -> Size to something above 1000.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11287
Summary: err:ole:CoInitializeEx Attempt to change threading model
of this apartment from apartment threaded to multi-
threaded
Product: Wine
Version: 0.9.5.
Platform: Macintosh
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kevin01(a)kilohotel.com
I get an error when trying to run My Sirius Studio.exe
http://download.sirius.speedera.net/stiletto/SiriusStudioSetup.exe
The error is:
fixme:win:EnumDisplayDevicesW ((null),0,0x61e3e0,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x61e3e0,0x00000000), stub!
fixme:wtsapi:WTSRegisterSessionNotification Stub 0x6002c 0x00000000
err:ole:CoInitializeEx Attempt to change threading model of this apartment from
apartment threaded to multi-threaded
err:ole:CoGetClassObject class {25baad81-3560-11d3-8471-00c04f79dbc0} not
registered
err:ole:CoGetClassObject no class object {25baad81-3560-11d3-8471-00c04f79dbc0}
could be created for context 0x1
** (My Sirius Studio.exe:44): WARNING **: Thread 00000000 may have been
prematurely finalized
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr
0x68fa02fc
In order to install and use this software, I did the following:
winetricks corefonts
winetricks mono12
wineticks gdiplus
I had to use the native gdiplus, or I get the problem seen in bug 11033.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41617
Bug ID: 41617
Summary: GPower 3.1.9.2: Crashes when a plot is created.
Product: Wine
Version: 1.9.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: dralcohen(a)netscape.net
Distribution: ---
Created attachment 55970
--> https://bugs.winehq.org/attachment.cgi?id=55970
Terminal output from running the application attached. The first line that
occurred after a plot attempt is marked with <<<<<<<.
The application G*Power 3.1.9.2 hangs and needs to be restarted whenever I try
to create any type of plot (e.g., x-y plot for range of values or distribution
plots).
http://gpower.hhu.de/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34029
Bug #: 34029
Summary: QuickBooks SS 2008 R1 hangs on first run
Product: Wine
Version: 1.6-rc5
Platform: x86-64
URL: http://download.microsoft.com/download/C/C/0/CC0BD555-
33DD-411E-936B-73AC6F95AE11/IE8-WindowsXP-x86-ENU.exe
OS/Version: Linux
Status: NEW
Keywords: dotnet, download
Severity: minor
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Classification: Unclassified
Created attachment 45221
--> http://bugs.winehq.org/attachment.cgi?id=45221
wine-1.6-rc5 console output
QuickBooks SS 2008 R1 hangs on first run following a successful install and
working around Bug 34028 with msxml4.
Subsequent attempts to run the application becomes less and less useful: I
assume the data becomes too corrupt to continue.
Workaround is dotnet20.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40409
Bug ID: 40409
Summary: builtin gdiplus causes K-Shoot Mania to lag in some
menus, native gdiplus causes missing textures
Product: Wine
Version: 1.9.7
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: lena.stoffler(a)ymail.com
Distribution: ---
Created attachment 54144
--> https://bugs.winehq.org/attachment.cgi?id=54144
log, native gdiplus
K-Shoot Mania AppDB ->
https://appdb.winehq.org/objectManager.php?sClass=application&iId=17474
I did a lot of research to get this game to run normally. I have some
interessting results. Maybe this is fixable?
I'm sure the problem sits in the GDIPlus DLL
Short summary:
builtin: some menus lags really hard (very low framerate, 2~3 + input lag),
all textures are visible
native: normal framerate in all menus, but some missing textures (plain white
spot where the textures should be)
builtin (Wine)
~~~~~~~~~~~~~~
Probably the reason for the heavy lag? Only using builtin gdiplus.
fixme:wincodecs:JpegDecoder_Frame_CopyPalette (0x...,0x...): stub
fixme:gdiplus:GdipCreateBitmapFromGdiDib (0x2002a60, 0x6b10000, 0x6578c8) -
partially implemented
Basically a stub and a partially implemented function. Maybe the game requires
a better GdipCreateBitmapFromGdiDib implementation or the
JpegDecoder_Frame_CopyPalette function. I don't know.
NOTE: The JpegDecoder_Frame_CopyPalette fixme doesn't appear with the native
gdiplus.
native (Windows) - winetricks gdiplus
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No lag there, but now some textures are missing. Instead of the texture which
should be there, there is only a plain white spot. The 'generated' texture
files are empty files (0 byte).
You can verify this by youself easily: the cache folder is in the game folder.
($GAME/cache)
This is the fixme which is spammed in the terminal when using the native
gdiplus, installed using winetricks.
fixme:bitmap:SetBitmapBits Unhandled partial pixel
The other 2 fixmes from the builtin version are completely gone.
The 2 logs are attached separately for better readability.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25355
Summary: Time clock SBE 1.2 and 2.2 not working properly on
ubuntu 10.04LTS
Product: Wine
Version: 1.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ryanmore2006(a)yahoo.com.ph
Our company used Ubuntu 8.04 install in all computer in all branches. were
using Time clock SBE 1.2 for time logging for all our employees. the said
software were stable in ubuntu 8.04 LTS wine wine version 1.0.
The problem starts when we updated the LINUX OS to Ubuntu 10.04LTS with wine
1.2 install, but something wrong with the some menu can't be seen anymore, we
tried to update the time clock sbe form 1.2 to 2.2 but the unfortunately it did
not fixed the problem. we also updated the version of wine but still the same.
for reference i will attached the screen shot for ubuntu 8.04 and 10.04
Im homping that someone can help me with this problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27294
Summary: livezilla can't start, complains of missing Verdana
font
Product: Wine
Version: 1.3.20
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
A user complained that Livezilla wouldn't start, see
http://forum.winehq.org/viewtopic.php?t=12202
I was able to reproduce this, plus a possible font-related gdiplus bug:
cd $HOME
rm -rf ~/.wine
sh winetricks corefonts dotnet20
wget http://www.livezilla.net/downloads/pubfiles/LiveZilla_3.3.2.2_Full.exe
wine LiveZilla_3.3.2.2_Full.exe
cd ~/".wine/drive_c/Program Files/LiveZilla"
wine LiveZilla
That gets the error
Your system misses the font Microsoft Sans Serif
Copying micross.ttf from a Windows system into ~/.wine/drive_c/windows/Fonts
gets past that. (Dunno if that needs to be added to winetricks,
or if one of the existing fonts in 'allfonts' should satisfy it.)
The next problem is
Your system misses the font Tahoma
Doing
winetricks tahoma gdiplus
gets past that. (Don't know why gdiplus was needed, that's interesting.)
The next problem is the user's error,
Your system misses the font 'Verdana Regular'
Which is funny, because Verdana Regular is already in windows/Fonts,
and WINEDEBUG=+font shows
trace:font:AddFontToList Loading font file
"/home/dank/.wine/dosdevices/c:/windows/Fonts/Verdana.TTF" index 0
trace:font:get_familyname Got localised name L"Verdana"
trace:font:AddFontToList fsCsb = 2000019f 00000000/00000287 00000000 00000000
00000000
trace:font:AddFontToList Added font L"Verdana" L"Regular"
...
trace:font:AddFontToList Loading font file
"/usr/share/fonts/truetype/msttcorefonts/Verdana.ttf" index 0
trace:font:get_familyname Got localised name L"Verdana"
trace:font:AddFontToList Already loaded font L"Verdana" L"Regular" original
version is 10000, this version is 10000
trace:font:AddFontToList Original font is newer so skipping this one
Oddly, at some point, wine forgets about the Regular variant:
trace:font:DumpFontList Family: L"Verdana"
000d:Ret advapi32.RegGetValueW() retval=0000trace:font:DumpFontList L"Bold"
2000019f
000d:Call advapi32.RegGetValueW(0000004c,000trace:font:DumpFontList L"Bold
Italic" 2000019f
Perhaps one of the fonts in /usr/share/fonts is interfering...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33410
Bug #: 33410
Summary: QQ International 1.6 displays its window abnormally
with a black line across
Product: Wine
Version: 1.5.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fangendoucg(a)gmail.com
Classification: Unclassified
Created attachment 44204
--> http://bugs.winehq.org/attachment.cgi?id=44204
screenshot
Hi folks,
While I install QQ International QQIntl1.61.exe, its first window shows with a
threadlet across.See the attachment.
Well, winetricks gdiplus can workaround it.
It's free to download.
$ sha1sum QQIntl1.61.exe
6cd9042f591a7b140e3216df2851c9b7a436be34 QQIntl1.61.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24653
Summary: Builtin GdiPlus doesn't draw lines equally to native
GdiPlus
Product: Wine
Version: 1.3.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: boreno(a)gmail.com
Created an attachment (id=31163)
--> (http://bugs.winehq.org/attachment.cgi?id=31163)
Sourcecode that draws GdiPlus pixel-perfection tests. Image that shows tests
drawn using native and builtin GdiPlus.
Lines are off by 1 pixel at either start or end position depending on drawing
operation. Image and source code attached. Marked with severity major since it
ruins pixel-perfection for UI components developed to rely on GdiPlus. In other
words, it looks too ugly to be released to customers.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32266
Bug #: 32266
Summary: Songr Portable 2.0 fails to start
Product: Wine
Version: 1.5.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jaimerave(a)gmail.com
Classification: Unclassified
Created attachment 42579
--> http://bugs.winehq.org/attachment.cgi?id=42579
Error log
Songr Portable 2.0 fails to start with current version of Wine, I guess is a
problem with Wine-mono since Songr requires .Net 3.5 to work.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=37050
Bug ID: 37050
Summary: Wine and FreeSCAN.exe fails to load
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: loader
Assignee: wine-bugs(a)winehq.org
Reporter: hd625b(a)gmail.com
Used Lunix Mint17 Terminal and Wine to run FreeSCAN.exe which threw the errors
below. FreeSCAN.exe is from SixSpot Software.
hd625b@MyLunixMint17 ~ $ wine "/home/hd625b/.wine/drive_c/Program
Files/FreeSCAN/FreeSCAN.exe"
Unhandled Exception:
System.TypeLoadException: Could not load type 'FreeSCAN.lblSiteNote' from
assembly 'FreeSCAN, Version=0.8.3.0, Culture=neutral, PublicKeyToken=null'.
at FreeSCAN.My.MyProject+MyForms.get_lblSiteNote () [0x00000] in <filename
unknown>:0
at FreeSCAN.My.MyApplication.OnCreateMainForm () [0x00000] in <filename
unknown>:0
at
Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun ()
[0x00000] in <filename unknown>:0
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run
(System.String[] commandLine) [0x00000] in <filename unknown>:0
at FreeSCAN.My.MyApplication.Main (System.String[] Args) [0x00000] in
<filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.TypeLoadException: Could not load
type 'FreeSCAN.lblSiteNote' from assembly 'FreeSCAN, Version=0.8.3.0,
Culture=neutral, PublicKeyToken=null'.
at FreeSCAN.My.MyProject+MyForms.get_lblSiteNote () [0x00000] in <filename
unknown>:0
at FreeSCAN.My.MyApplication.OnCreateMainForm () [0x00000] in <filename
unknown>:0
at
Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun ()
[0x00000] in <filename unknown>:0
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run
(System.String[] commandLine) [0x00000] in <filename unknown>:0
at FreeSCAN.My.MyApplication.Main (System.String[] Args) [0x00000] in
<filename unknown>:0
hd625b@MyLunixMint17 ~ $
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38932
Bug ID: 38932
Summary: Betfair Betting Assistant throws a warning while
loading
Product: Wine
Version: 1.7.47
Hardware: x86
URL: https://www.gruss1-software.co.uk/Betting_Assistant/Be
tting_Assistant.msi
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
Distribution: Ubuntu
Created attachment 51866
--> https://bugs.winehq.org/attachment.cgi?id=51866
wine-1.7.47-84-g2294d3b screenshot
After a successful installation, Betfair Betting Assistant throws a warning
while loading, and then doesn't load the log-in dialog as it should.
The workaround is dotnet20.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27447
Summary: HAL7600 doesn't start
System.InvalidOperationException:
WinForms_SeeInnerException
Product: Wine
Version: 1.3.22
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: adys.wh(a)gmail.com
Unhandled Exception: System.InvalidOperationException:
WinForms_SeeInnerException ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. --->
System.ComponentModel.Win32Exception: No valid icon entry were found.
at System.Drawing.Icon.InitFromStreamWithSize (System.IO.Stream stream, Int32
width, Int32 height) [0x00000] in <filename unknown>:0
at System.Drawing.Icon..ctor (System.Runtime.Serialization.SerializationInfo
info, StreamingContext context) [0x00000] in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoCMethod:InternalInvoke
(System.Reflection.MonoCMethod,object,object[],System.Exception&)
at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags
invokeAttr, System.Reflection.Binder binder, System.Object[] parameters,
System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags
invokeAttr, System.Reflection.Binder binder, System.Object[] parameters,
System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[]
parameters) [0x00000] in <filename unknown>:0
...
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run
(System.String[] commandLine) [0x00000] in <filename unknown>:0
at HAL7600.My.MyApplication.Main (System.String[] Args) [0x00000] in
<filename unknown>:0
http://forums.mydigitallife.info/threads/23966-UNSUPPORTED-HAL7600-Permanen…
mono210 required. Check url for direct download link
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21227
Summary: cmd doesn't echo redirection like native
Product: Wine
Version: 1.1.35
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P3
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Native cmd echoes commands after some canonicalization has been done
on their redirects. A batch file containing
dir 1> ok
dir > bad
dir | bad
dir > blah > bad
echoes as
dir 1> ok
dir 1> bad
dir | bad
dir 1> bad
(note the extra space inserted before the > or |).
Wine's cmd doesn't currently do this, but it could probably
do so without too much trouble; it already collects redirects
separately for each command.
For the moment I'll probably put a kludge in the cmd conformance
test runner to compensate.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38289
Bug ID: 38289
Summary: cmd replacement is unable to display a bat file script
correctly.
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: njls.yoshi2(a)gmail.com
Distribution: ---
Created attachment 51122
--> https://bugs.winehq.org/attachment.cgi?id=51122
Example batch
The amended Wine cmd.exe (version 6.1.7601 [1.6.2]) is unable to display a
batch script to emulate written text to a command line (script attached).
The script runs true in sequence if perused, however, the line where the text
should be displayed, yields the characters, "a~0,1", which is a defined
argument (expressed in attached script), but not the correct output.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32449
Bug #: 32449
Summary: QGIS err:module:import
Product: Wine
Version: 1.5.19
Platform: x86
URL: http://hub.qgis.org/projects/quantum-gis/wiki/Download
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: guy.roussin(a)teledetection.fr
Classification: Unclassified
Created attachment 42810
--> http://bugs.winehq.org/attachment.cgi?id=42810
Error log when launching qgis 1.8.0-1 on wine 1.5.19
Hi,
QuantumGIS is an open source software which run very fine on linux.
Today, i try the windows version on a quantal 32 bits chroot on my debian sid
amd64.
http://qgis.org/downloads/QGIS-OSGeo4W-1.8.0-1-Setup.exe
I get this error when launching qgis :
(see attachment)
I get the same error with PlayOnLinux ...
Thank you,
Guy
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21806
Summary: Star Wars Empire at War: Demo crashes during battles
Product: Wine
Version: 1.1.39
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gaming4jc2(a)yahoo.com
Created an attachment (id=26385)
--> (http://bugs.winehq.org/attachment.cgi?id=26385)
Tutorial 1 debugs, pagefaults, backtraces...
This seems to affect the game any time you are going into battle. At the
loading screen the game will issue a exception.
You have two choices, retry or cancel. I've provided a backtrace log that
results from each selection - as well as the game's built debugger log.
For anyone wishing to confirm, just try Tutorial 1. It will crash in under
2mins. The other tutorials may crash too, but not nearly as often since there's
not many battles to load. I was using the Demo CD I got in a promo.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42698
Bug ID: 42698
Summary: FL Studio 12.4 setup does not show cursor
Product: Wine
Version: 2.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seanaubin(a)gmail.com
Distribution: ---
Running Linux Kernel 4.4.0 on Linux Mint 18 and installing FL Studio 12.4, the
cursor does not display during the install.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42270
Bug ID: 42270
Summary: Settlers 4 Gold - Hardware Rendering mode not working
Product: Wine
Version: 2.0-rc6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bronsonmathews(a)gmail.com
Distribution: ---
Created attachment 56975
--> https://bugs.winehq.org/attachment.cgi?id=56975
cmd log
The game runs ok in software mode. So this is a pretty low priority bug.
Settlers 4 Gold (Gog version) - changing the settings landscape engine, and
object engine from software to hardware does not work.
Attached command line output...
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41632
Bug ID: 41632
Summary: Wine not running with Administrative privileges
Product: Wine
Version: 1.9.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: stevedonato(a)gmail.com
Distribution: ---
Error running wine windows program. Error message produced is;
"You do not have Administrative privileges on this computer. Sign into Windows
as an Administrator. Try again."
Latest wine release 1.9.22
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35984
Bug ID: 35984
Summary: Leftover pixels in Microsoft Paint when using
Rectangle tool with thick border
Product: Wine
Version: 1.7.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: Nachanon_Vetjasit(a)hotmail.com
Created attachment 48104
--> http://bugs.winehq.org/attachment.cgi?id=48104
Screencast demonstrating the leftover lines problem
I've used Microsoft Paint on WINE, I found that when I set
line thickness to >1px (using Line tool) and select Rectangle tool,
then drag mouse to South-East direction to create a rectangle
(but don't release mouse button yet), then move to West, then North,
and release the button. I'll see that some color pixels that's used to be
old rectangle border were left over.
The larger line size, more obvious the effect.
Apart from leftover lines, there is also a knot on the top left of the
rectangle. (Won't be visible at first glance, use Magnifier tool to see it)
These leftover lines (and knot) also didn't disappear on Undo too.
Screencast demonstrating this problem and affected image also attached.
(Using 5px line thickness in this case).
Microsoft Paint 5.1.2600.5512 (mspaint.exe from Windows XP SP3)
mfc42u.dll 6.2.8071.0 picked from Windows XP SP3, placed with the same
directory as mspaint.exe
WINE: 1.7.15 (git), set to Windows version XP
WINE installed without XInput2, OSMesa, OpenCL, CMS, GStreamer, and OSS support
System: Debian GNU/Linux 5.0 "Lenny" i386
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17195
Summary: NamedPipe datagrams need to be _really_ datagrams
Product: Wine
Version: unspecified
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lkcl(a)lkcl.net
ok, after a little bit of investigation, i think i understand the pipes code
enough to be able to say what's going on, and i'm seeing something like this:
process 1:
recvpipe = CreateNamedPipe("\\pipe\fred")
ReadFile(recvpipe, buffer, &length);
printf(length) ===> 43
ReadPipe(recvpipe, buffer, &length); /* no data */
process 2:
sendpipe = CreateNamedPipe("\\pipe\fred")
length = 9;
WriteFile(sendpipe, buffer, &length);
length = 34;
WriteFile(sendpipe, buffer, &length);
what's happening is that the data being sent down the pipes isn't being done as
datagrams. the implementation is using a stream-based fd.
the solution is: you _must_ implement a protocol on top of the pipes which
sends the length (as a 32-bit int, whatever) which is read off the fd, followed
by the data stream of _exactly_ that length.
_must_. there's no two ways about this.
the protocol of Pipes is unfortunately a combination of both datagrams and
streams. datagrams because the lengths of data sent are absolute and
inviolate. streams because the data order and reliability are _also_ absolute
and inviolate.
you can't use datagrams (because they're unreliable). you can't expect all
unixen to support datagrams on top of unix sockets (if that's what's being
used).
so - you have to send the length, as part of the implementation of the
pipe-data-send.
sending a length will also solve the issue of trying to send zero-length pipe
datagrams.
as a first implementation, you _might_ be able to get away with assuming that
when someone asks for some data, they _will_ provide a buffer big enough.
... actually... i don't see any ERR_MORE_DATA error codes in NtReadFile, so
that would explain... this is going to get messy :)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32618
Bug #: 32618
Summary: Atlantica Online partially hangs when rotating the
view with the mouse.
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: arek75(a)gmail.com
Classification: Unclassified
Created attachment 43044
--> http://bugs.winehq.org/attachment.cgi?id=43044
Bisect log
Starting with Wine 1.5.18, Atlantica Online is no longer playable due to a bug
where if you attempt to rotate the camera with the mouse (right-click and
drag), Atlantica's graphics lock up and the game seems to lose the mouse. You
can get the game to respond again by pressing alt on the keyboard, but you
still can't rotate the camera (or rather not much, it'll move a tiny bit each
time before locking up).
I went ahead and bisected this, and also ran into a problem where Atlantica
never got control of the mouse/keyboard and had to be closed with alt-f4. In
these cases I used 'git bisect skip' to continue. Git finally came up with 18
possible "bad commits". Looking at them in gitk, the following commits are of
note (the first skipped commit and the first known bad commit):
841214ddb4d4dc620e6b51dfe6655b585d423edc - user32: Don't check for driver
events before normal messages in PeekMessage.
a0f039a6049641cc2be8fa32f2afa3c3f394a99b - user32: Fix the wait event mask in
PeekMessage.
The first of these commits caused Atlantica to not respond much to
mouse/keyboard events (you could get a partial response from the mouse if you
could get it over a button, but you can't see the pointer), and while the
second patch fixed that, attempting to rotate the camera using the mouse causes
Atlantica's input/graphics to partially freeze as noted above.
I've attached the bisect log so that you can have a look at it if you need to.
--James
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33239
Bug #: 33239
Summary: VisualBasic arrays of User Defined Type (UDTs) with
strings
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mod(a)navsoft.com
Classification: Unclassified
Created attachment 43964
--> http://bugs.winehq.org/attachment.cgi?id=43964
Uses a simple program to test where the crash occurs
I use arrays of UDTs which work under MS Windows. (Any version post Win 2000
except ME.) The program also works happily on a Mac using a Parallels virtual
machine.
These fail under WINE if one or more of the fields is a string. The "TYPE"
order makes no difference.
UDTs which contain only numbers are not affected.
Failure occurs on any attempt to "ReDim" or "Erase" the array. The problem does
not occur when the strings are fixed length or for flat UDTs containing strings
of undeclared length. Prior to a crash, the content of the UDTs can be read and
written to.
Trying to write a simple program produces strange results. I tried initially on
an old PC and found that it would crash simply by redimming the arrays but when
installed under Parallels, it will handle simple arrays and only crashes as I
start to get more adventurous; i.e. using a UDT type declared in a DLL but
otherwise identical.
My main program can be downloaded at http://navsoft.com/AstroNav_Setup.exe. It
makes no claims to being compatible with WINE but there are references to the
problem area elsewhere in this forum by Users who would like to run it under
WINE.
AstroNav uses UDTs extensively. The problem is the Almanac screen where multi
dimension UDTs are widely used. With AstroNav, simply declaring and then
destroying the arrays will cause a crash. [There is also a problem with WINE's
treatment of SetGraphicsMode which I have not yet pinned down but will
hopefully circumvent very shortly. (The SetGraphicsMode API does not work quite
as Microsoft claim so removing it, is probably desirable.)]
The attached backtrace was caused by the following code. The crash occurs only
for Command4_Click() and only on the third press. (Rapid pressing will cause a
"The array is temporarily locked" error/ crash.)
FORM CODE
==========
Private Type My_UDT
n1 As Long
s1 As String
s2 As String
End Type
Private mUDT() As My_UDT
Private DLL_UDT() As Main_Almanac_Columns
Private Sub Command1_Click() ' NO PROBLEM NOW BUT SIMILAR CODE CAUSED A
Dim i As Long ' CRASH ON AN OLDER PC
ReDim mUDT(99)
For i = 0 To 99
mUDT(i).s1 = "Some String"
mUDT(i).s2 = "Some String"
Next i
ReDim mUDT(99)
End Sub
Private Sub Command2_Click() ' SAME AS ABOVE BUT USING A GLOBAL UDT
Dim i As Long ' = A BIT MORE ADVENTUROUS
ReDim gUDT(99)
For i = 0 To 99
gUDT(i).s1 = "Some String"
gUDT(i).s2 = "Some String"
Next i
ReDim gUDT(99)
End Sub
Private Sub Command3_Click() ' MORE ADVENTUROUS; PASSING DATA USING
Compile_Data ' Public Property Get
gUDT = My_Module_UDT
End Sub
Private Sub Command4_Click() ' CRASHES ON THE THIRD CLICK ON MY MAIN
Alt_Compile_Data ' MACHINE
DLL_UDT = My_DLL_UDT
End Sub
MODULE CODE
===========
Private DLL_UDT() As Main_Almanac_Columns
Type Module_UDT
n1 As Long
s1 As String
s2 As String
End Type
Private mUDT() As Module_UDT
Public gUDT() As Module_UDT
'\\ THE MODULE LEVEL TEST
Sub Compile_Data()
Dim i As Long
ReDim mUDT(71)
For i = 0 To 71
With mUDT(i)
.n1 = i
.s1 = i
.s2 = i
End With
Next i
End Sub
Public Property Get My_Module_UDT() As Module_UDT()
My_Module_UDT = mUDT
End Property
'\\ USING THE IDENTICAL TYPE DECLARED IN A MODULE
Sub Alt_Compile_Data()
Dim i As Long
ReDim DLL_UDT(71)
For i = 0 To 71
With DLL_UDT(i)
.Gap = i
.sGHA = i
.sDec = i
End With
Next i
End Sub
Public Property Get My_DLL_UDT() As Main_Almanac_Columns()
My_DLL_UDT = DLL_UDT
End Property
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38892
Bug ID: 38892
Summary: Please support more architectures.
Product: Wine
Version: unspecified
Hardware: Other
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: loader
Assignee: wine-bugs(a)winehq.org
Reporter: ytrezq(a)sdf-eu.org
Distribution: ---
Hello,
It might sound useless but the WINAPI supported Itanium PPC MIPSR4000 and dec
alpha in the past.
While windows doesn't provide updates for those platforms, compiling programs
written for the WINAPI to those arch is the best way to get decent speeds (not
to add the need of support for ARC firmware which prevent running them on
recent ppc).
Of course this is not for emulating instructions sets but for running windows
programs natively on those platforms.
For testing on x86 an ARC bios for MIPS which can work on qemu is documented
here http://gunkies.org/wiki/Installing_Windows_NT_4.0_on_Qemu(MIPS)
Visual C++ RISC editions for those platforms are available here
http://bingeflying.com/3.2/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34708
Bug #: 34708
Summary: Silent Hill 4: The Room don't run in terminal.
Product: Wine
Version: 1.7.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sov.info(a)mail.ru
Classification: Unclassified
Created attachment 46270
--> http://bugs.winehq.org/attachment.cgi?id=46270
01 terminal output
This game don't start via terminal. BUT!
When i just starting it by clicking on the .desktop file, it runs! This
behavior is pretty interesting. Of cource, this game crushes even if start by
clicking on desktop label. But if we want to see what stubs happens in game, we
should before fix terminal behavior.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23434
Summary: wine hangs & jumps up to 100% processor load
Product: Wine
Version: 1.2-rc5
Platform: x86
URL: http://www.velumng.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: axel.braun(a)gmx.de
Running wine-1.1.48_1.2rc5-1.1, i downloaded the demo from velumng.com, a race
management software.
So far it works well, I created a race, two participants, entered start and end
time, but when I come to the result list creation, the load goes up to 100%,
and caused a hang of the X-session once.
At this point it seems to load a HTML-page that was dynamically generated. wine
did not submit any error message when started from console.
Let me know what I can do to come to a more verbose error output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33982
Bug #: 33982
Summary: Steam windows can be resized to 1x1 despite minimum
size
Product: Wine
Version: 1.6-rc2
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: adys.wh(a)gmail.com
Classification: Unclassified
Steam's windows can be resized to 1x1. On Windows they can't. The minimum size
for the main steam window is supposed to be 900x600 and for chat windows
396x351 according to tests.
Using openbox 3.5.0
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13076
Summary: untangle: resize fails
Product: Wine
Version: 0.9.61.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)wnoise.ofb.net
After any of the games in Simon Tatham's portable puzzle collection is resized,
it only redraws the portion of the window that is the original size.
Under windows, these games rescale to fit in the new window size.
These may all be downloaded at
http://www.chiark.greenend.org.uk/~sgtatham/puzzles/
and have full source available.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37864
Bug ID: 37864
Summary: When I resize a maximized MDI window it assumes the
new size instead of remaining maximized
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ryampolsky(a)yahoo.com
Distribution: ---
Created attachment 50431
--> https://bugs.winehq.org/attachment.cgi?id=50431
Screenshot showing a maximized MDI child after resizing 'unmaximizes' it.
My app is a 'smart terminal' that supports multiple sessions in MDI windows.
The size of the MDI child windows can be changed by the app running on the
server, so at the end of each transaction, if the app has changed the window
dimenensions, I resize the window. If my MDI window is maximized, this has no
effect on a Windows system (except that if I later unmaximize the MDI child, it
will display at the correct new size). But on recent WINE builds (Linux and
Mac), when I resize the MDI child, the window assumes the new size, even though
it's techincally in the 'mdi maximized' state (i.e., the MDI buttons are still
there on the menubar. If I switch between MDI children, they get redrawn
correctly maximized (including the one I just resized).
I coded a workaround in my app where I don't resize the window if it's
maximized, and that seems to work okay under WINE (though I guess the new size
info is getting lost). In any case, that verifies that the problem is
definitely happening in response to my resize operation.
F.Y.I., my resize operation uses SetWindowPlacement() to change the position
and size of the window - specifically because I don't want it to affect the
window if it's minimized or maximized. Only if it's in the normal state.
It's been a long time since I wrote this code, but again, it's always worked on
all versions of Windows. I have a feeling it might have worked a while back in
WINE - though I rarely run maximized, so I may have just recently noticed a bug
that's always been there...
Here's the basic code logic. SizeWindowForScreenDimentions calls
SetWindowPlacement based on the size calculated for the new row/column grid.
The code below has the workaround that prevents the problem in WINE. Also
attached a screenshot showing the unmaximized children with the MDI buttons
still on the menubar.
// If base screen dimensions don't match prior dimensions, resize the window
here.
// (unless mdi-maximized, in which case, doing this unmaximizes in WINE)
if (!mdi_maximized) {
if ((rows != old_rows) || (cols != old_cols)) {
SizeWindowForScreenDimensions(scr, rows, cols, &resizeable);
}
}
// In case window was hidden under an initial popup, show it now.
ShowWindow(scr->hScreenWnd, SW_SHOW);
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26766
Summary: A lot of games are listed against distributors and not
the developers
Product: WineHQ Apps Database
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: ASSIGNED
Severity: trivial
Priority: P5
Component: appdb-unknown
AssignedTo: kennybobs(a)o2.co.uk
ReportedBy: kennybobs(a)o2.co.uk
A lot of the games in the AppDB are listed against the distributors instead of
the actual developers.
This is not a major problem but it would be nice to tidy this up and any bugs
relating to certain developers would be easier to collect.
Other maintainers have, sensibly, simply added "Versions" for each distributor,
and as each distributor tends to update their products as they see fit, rather
than when the developer sees fit, this could affect the ratings for different
implementations of the same game.
Assigning to myself as it's a fairly big job (some games have to be downloaded
and run just to find out who developed them) and will take far too long for me
to simply remember what's what.
Currently affected: Big Fish Games, PopCap, Steam.
Anyone: please feel free to help!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16091
Summary: StickyDrive demo installer doesn't recognize USB key as
removable
Product: Wine
Version: 1.1.8
Platform: Other
URL: http://mmiline.com/
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
(From mmiline.com's main page, click on StickyDrive and then "Learn More",
then under Red Sox demo, click "Download Now". This points to
http://www2.stickyinc.com/download/getDownload.php?idTag=BOSTN-1668&action=…
which downloads the installer in question,
InstallStickyDrive-BOSTN-1668.exe.)
The installer puts up a dialog box of drive letters,
saying "Please select a valid removable drive...",
but nothing is listed, even if you have a USB drive
inserted and Wine has already created a d: mapping for it.
If you click on the "Show all drives"
checkbox, all drives are indeed shown.
Happily for us, this dialog box is in a separate
executable. While that prompt is up, grab a copy
of C:\windows\temp\SDDriveSelector.exe
You can then reproduce the problem easily by running
just that .exe.
+relay shows it's using GetDriveType() on each drive,
but evidently it doesn't like what it's getting.
You can work around this by using winecfg to mark d:
as a floppy, but really, wine should know that the inserted
USB drive is removable, shouldn't it?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35848
Bug ID: 35848
Summary: Sound, Black Screen then crash
Product: Wine
Version: 1.7.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: adec2010(a)hotmail.co.uk
Killing Time. After installation, set to windows 95 compatibility. It runs with
a black screen. I can hear sound but then a crash back to the desktop
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32673
Bug #: 32673
Summary: Rainbow Six fails to start for the first time with
windows version > ME
Product: Wine
Version: 1.5.21
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: flavio(a)nebososo.com
Classification: Unclassified
Tom Clancy's Rainbow Six will only start for the first time if the windows
version is set to ME or older. However it does work when set to newer versions
after it has already been started using an old one.
Using a clean prefix.
The demo can be downloaded here:
http://www.fileplanet.com/27609/download/Rainbow-Six-Demo
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34018
Bug #: 34018
Summary: Altium Designer 10 hangs on startup
Product: Wine
Version: 1.6-rc4
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Classification: Unclassified
After patching wininet to work around bug 34013, the game^Wapp installs
successfully. It hangs on startup during "configuring supplier search"
(seemingly due to a deadlock when unloading altiumcore.bpl; see attached bt
all.)
"winetricks mdac28" works around this hang and lets you get to the next
problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35385
Bug ID: 35385
Summary: Couldn't open under Wine from FL Studio track's with
Cyrillic names.
Product: Wine
Version: 1.7.8
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mikhail.v.gavrilov(a)gmail.com
Classification: Unclassified
Couldn't open under Wine from FL Studio track's with Cyrillic names.
Demonstration:
https://drive.google.com/file/d/0B0nwzlfiB4aQXzBDSDJ3TmtrYVU/edit?usp=shari…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39308
Bug ID: 39308
Summary: thdf.exe : outputting floats returns 0
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: dos
Assignee: wine-bugs(a)winehq.org
Reporter: enoua5(a)gmail.com
Distribution: ---
On lines that, in the c++ code, use "cout" to output a float, it will show 0,
even though it's apparent that the float is still stored, still modified, and
still controlling the flow of if statements
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25498
Summary: ACDSeePFM doesn't see dlls in Common Files
Product: Wine
Version: 1.3.9
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=32462)
--> (http://bugs.winehq.org/attachment.cgi?id=32462)
Terminal output on Wine 1.3.9 at installation
Steps to reproduce:
1) remove ~/.wine
2) install acdseepfm-1-0-81-win-en.exe
3) wine ACDSeePFM.exe
Behaviour:
err:module:import_dll
Expected behaviour:
no err:module:import_dll
Terminal output:
err:module:import_dll Library ShellIntMgrPFMU.dll (which is needed by
L"C:\\Program Files\\ACD Systems\\ACDSee Picture Frame
Manager\\1.0\\ACDSeePFM.exe") not found
err:module:import_dll Library ACDInTouch70U.dll (which is needed by
L"C:\\Program Files\\ACD Systems\\ACDSee Picture Frame
Manager\\1.0\\ACDSeePFM.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program
Files\\ACD Systems\\ACDSee Picture Frame Manager\\1.0\\ACDSeePFM.exe" failed,
status c0000135
Additional info:
Both dlls are available in "~/.wine/drive_c/Program Files/Common Files/ACD
Systems" and if I copy them to application main directory both errors
disappear.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37607
Bug ID: 37607
Summary: MyHeritage Family Tree Builder fails to add "window"
item/initialize scripting engine
Product: Wine
Version: 1.7.31
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: jscript
Assignee: wine-bugs(a)winehq.org
Reporter: sebastian(a)fds-team.de
Distribution: ---
(Originally reported here:
https://github.com/wine-compholio/wine-staging/issues/187)
After starting the main application first login with your account. Registration
is free, but required unfortunately. Register via the website to workaround an
issue with the application registration form - make sure that no '+' signs are
in your email address, registration works, but login not...
Create a new project, create a new family, and click on Reports -> Ancestors.
A few message boxes will show up with content
'Unable to add "window" item'
'Unable to initialize scripting engine'
These message boxes repeat a couple of times, and afterwards an empty report
shows up.
Related terminal output with WINEDEBUG=+jscript:
--- snip ---
003f:trace:jscript:DllMain (0x7cb70000 1 (nil))
003f:trace:jscript:DllGetClassObject (CLSID_JScript
{00000001-0000-0000-c000-000000000046} 0xc5de4b8)
003f:trace:jscript:ClassFactory_QueryInterface (0x7cbfeef0)->(IID_IClassFactory
0xc5de4b8)
003f:trace:jscript:ClassFactory_AddRef (0x7cbfeef0)
003f:trace:jscript:JScriptFactory_CreateInstance ((nil)
{bb1a2ae1-a4f9-11cf-8f20-00805f2cd064} 0x26c9bb8)
003f:trace:jscript:JScript_QueryInterface (0xb39e270)->(IID_IActiveScript
0x26c9bb8)
003f:trace:jscript:JScript_AddRef (0xb39e270) ref=2
003f:trace:jscript:JScript_Release (0xb39e270) ref=1
003f:trace:jscript:ClassFactory_Release (0x7cbfeef0)
003f:trace:jscript:JScript_SetScriptSite (0xb39e270)->(0x26c9bc0)
003f:trace:jscript:JScript_AddNamedItem (0xb39e270)->(L"window" 2)
003f:trace:msgbox:MSGBOX_OnInit L"Unable to add \"window\" item\n"
003f:trace:msgbox:MSGBOX_OnInit L"Unable to initialize scripting engine"
--- snip ---
JScript_AddNamedItem fails because This->ctx == NULL.
Installing native 'jscript' via 'winetricks jscript' works around this issue
and the report shows up properly (wasn't able to compare it with Windows, but
definitely looks better than before).
$ git describe origin/master
wine-1.7.31-88-g9a68ef4
$ sha1sum family_tree_builder_7138.exe
74245c94089642d65b2fde09fd7188430df68b81 family_tree_builder_7138.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31332
Bug #: 31332
Summary: Project64: about page fails to render
Product: Wine
Version: 1.5.9
Platform: x86
URL: http://www.pj64-emu.com/downloads/func-startdown/34/
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: minor
Priority: P2
Component: ieframe
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Classification: Unclassified
Created attachment 41173
--> http://bugs.winehq.org/attachment.cgi?id=41173
terminal output
Install project64, run it. Go to 'Help', 'about Project 64'. A small window
opens up, that should contain the about info. Behind this, iexplore.exe opens
with about:blank.
winetricks -q ie7 works around it.
austin@aw25 ~ $ sha1sum setup\ Project64\ 1.6.exe
005954395994c0a355c06abae3fc88d10ae84934 setup Project64 1.6.exe
austin@aw25 ~ $ du -h setup\ Project64\ 1.6.exe
2.0M setup Project64 1.6.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10531
Summary: Windows Calculator: Color in buttons missing
Product: Wine
Version: 0.9.49.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bammzilla(a)gabriana.com
Created an attachment (id=9282)
--> (http://bugs.winehq.org/attachment.cgi?id=9282)
How it looks in my Windows XP box
In Windows Calculator CALC.EXE the button texts should be color coded but all
appear black in Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40248
Bug ID: 40248
Summary: Exception when I try to call Translate method
Product: Wine
Version: 1.9.4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
Assignee: wine-bugs(a)winehq.org
Reporter: gennady.alimov(a)gmail.com
Distribution: ---
Created attachment 53797
--> https://bugs.winehq.org/attachment.cgi?id=53797
code & exception
if I try to translate SIDs to Names I've got the exception
"Index was outside the bounds of the array."
It looks like there is no mapping between account names and SIDs.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=36373
Bug ID: 36373
Summary: Requiem: Avenging Angel - Black screen in-game
Product: Wine
Version: 1.7.18
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: ubuntugamingproject(a)gmail.com
Created attachment 48430
--> https://bugs.winehq.org/attachment.cgi?id=48430
Black screen log
The game installs and runs correctly, but then if you start a new game, there's
only a black screen, and the only thing can be done is going back to the menù.
So the game is unplayable.
Log attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35940
Bug ID: 35940
Summary: Server (and perhaps others) may fail to build on some
platforms
Product: Wine
Version: unspecified
Hardware: x86
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: build-env
Assignee: wine-bugs(a)winehq.org
Reporter: carlo.bramix(a)libero.it
In my opinion there is a severe mistake in the build system for the server.
>From the man page of GCC, the documentation for '-I' option says:
`-I DIR'
Add the directory DIR to the list of directories to be searched
for header files. Directories named by `-I' are searched before
the standard system include directories. If the directory DIR is
a standard system include directory, the option is ignored to
ensure that the default search order for system directories and
the special treatment of system headers are not defeated .
When building the server, a '-I' option is placed on the command line, pointing
to the source directory of the server.
The file wine/port.h provides this piece of code:
[...cut...]
#ifdef HAVE_PROCESS_H
# include <process.h>
#endif
[...cut...]
The problem comes out because, inside the directory with the sources of the
server, there is a file named process.h and since the -I option allows to take
the files before the standard system include directories, the wine/port.h won't
include the system file, but the one in the server directory: infact, it
happens that the local process.h file is included two times.
This is the cause for the server not compiled correctly on my platform (cygwin)
but probably it can be also applied to others.
I did an experiment and I have bypassed the problem by changing the generated
Makefile: I replaced the '-I' option that pointed to the source directory of
the server with '-idirafter'. The final result is a server that installs and
runs correctly on Windows.
Actually, this defect caused a failure on the server, but probably it may apply
to all components of WINE with some local include files: the option that allows
to point to the source directory of the component being compiled (and only this
one) should be changed with '-idirafter' or something similar, depending on the
compiler used, while all other paths could be left to '-I' without troubles.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39532
Bug ID: 39532
Summary: Assassin's Creed Unity doesn't run
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: directx-d3dx10
Assignee: wine-bugs(a)winehq.org
Reporter: anakin.cs(a)gmail.com
Distribution: ---
Created attachment 52679
--> https://bugs.winehq.org/attachment.cgi?id=52679
terminal log
I've been trying to run Assassin's Creed Unity from Uplay on my laptop, both on
the Intel card and Nvidia card (with primusrun), and I always get the following
error message (translated from French):
"Can't launch the game. Your video card doesn't support DirectX 11 or the video
drivers need to be updated."
My video card is an Nvidia Geforce 850M.
Attached is the terminal output after trying to launch the game.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.