August 2010 - Wine-Devel - list.winehq.org

Re: Some statistics about the 1.0->1.2 development cycle

by Michael Stefaniuc

Hello Wolfram, On 08/15/2010 05:42 PM, Wolfram Sang wrote: > I am going to speak about my "getting into wine development" at FrosCon > (near Bonn/Germany) next weekend. During preparation, I was interested > in some numbers, so I roughly modified 'kps' (kernel patch statistics) > for wine. The outcome for the 1.0->1.2 cycle can be found here, if > somebody is interested (just make sure you read the README first): > > http://www.the-dreams.de/wine/winekpsstats10-12.tar.gz > > So far, not too surprising IMHO, although I probably missed a number of > people. I am open for comments, if there are some. you'll have to reassign my patches to the "(None)" category. While I do work for Red Hat I'm working there as a network engineer, not as a developer. Wine is pure hobby for me and Red Hat doesn't pay me a cent for that; even my trips to the WineConfs are payed out of my own pocket. bye michael

Aug. 15, 2010

Re: [PATCH 1/5] d3d10: Fix d3dcommon.h inclusion.

by James McKenzie

Rico Schüller wrote: > Hi, > > this patch series implements the ID3DBlob interface. This time the > interface is implemented in the d3dcompiler_43.dll. The function > D3D10CreateBlob from d3d10 is forwarded to the D3DCreateBlob function > in the d3dcompiler_43.dll. Does this replace the ten patch series you submitted on 8/11? This is not clear here. James McKenzie

Aug. 15, 2010

Some statistics about the 1.0->1.2 development cycle

by Wolfram Sang

Hello, I am going to speak about my "getting into wine development" at FrosCon (near Bonn/Germany) next weekend. During preparation, I was interested in some numbers, so I roughly modified 'kps' (kernel patch statistics) for wine. The outcome for the 1.0->1.2 cycle can be found here, if somebody is interested (just make sure you read the README first): http://www.the-dreams.de/wine/winekpsstats10-12.tar.gz So far, not too surprising IMHO, although I probably missed a number of people. I am open for comments, if there are some. Have a nice sunday, Wolfram

Aug. 15, 2010

Re: Wine users with a CD-ROM drive, please test

by James McKenzie

Matijn Woudt wrote: > On Fri, Aug 13, 2010 at 3:03 PM, <Joerg-Cyril.Hoehle(a)t-systems.com> wrote: > >> Hi, >> >> I found out that some machines ignore >> set c audio all off >> which was in the testsuite, while others react to it and even >> update the system preferences volume mixer control if >> it happens to be open. >> >> I don't know whether that difference depends on the HW (CD-ROM >> driver) or the OS. You can find it out by posting your results here. >> >> I'm now using >> set c audio all on >> (which should be the default) >> such that all users running the testsuite get to hear something. >> >> https://testbot.winehq.org/JobDetails.pl?Key=4434 >> mcicda.c:612: Test failed: STOP all returned MCIERR_HARDWARE >> (I fixed that, but not yet on testbot). >> >> Regards, >> Jörg Höhle >> > > That fixed playback. > One thing, with my Beethoven CD: > mcicda.c:300: Test failed: status position initially 00:03:00 > mcicda.c:306: Test failed: status position start 00:03:00 > mcicda.c:350: Test failed: status position initially 3001ms > > IIRC, it can be anything, but should atleast be 2 seconds. > It is. 3001 ms is one ms more than three seconds.... James McKenzie

Aug. 15, 2010

Re: [7/13] comctl32/imagelist: Fail to create imagelist with zero or negative image dimensions

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4453 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: [6/13] comctl32/imagelist: Fail in ImageList_GetIconSize on null parameters

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4452 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: [5/13] comctl32/tests: More imagelist tests to show broken parameter validation

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4451 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: [4/13] comctl32/imagelist: Fix failure code for IImageList_Remove()

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4450 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: [3/13] comctl32/imagelist: Fix failure code for IImageList_Draw()

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4449 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: [2/13] comctl32/tests: Use reduced IMAGELISTDRAWPARAMS structure size for tests

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4448 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1433: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: Wine users with a CD-ROM drive, please test

by Matijn Woudt

On Fri, Aug 13, 2010 at 3:03 PM, <Joerg-Cyril.Hoehle(a)t-systems.com> wrote: > Hi, > > I found out that some machines ignore > set c audio all off > which was in the testsuite, while others react to it and even > update the system preferences volume mixer control if > it happens to be open. > > I don't know whether that difference depends on the HW (CD-ROM > driver) or the OS. You can find it out by posting your results here. > > I'm now using > set c audio all on > (which should be the default) > such that all users running the testsuite get to hear something. > > https://testbot.winehq.org/JobDetails.pl?Key=4434 > mcicda.c:612: Test failed: STOP all returned MCIERR_HARDWARE > (I fixed that, but not yet on testbot). > > Regards, > Jörg Höhle That fixed playback. One thing, with my Beethoven CD: mcicda.c:300: Test failed: status position initially 00:03:00 mcicda.c:306: Test failed: status position start 00:03:00 mcicda.c:350: Test failed: status position initially 3001ms IIRC, it can be anything, but should atleast be 2 seconds. - Matijn

Aug. 15, 2010

Re: [1/13] comctl32/tests: Use better names for test functions, discover some new test failures

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4447 Your paranoid android. === WVISTAADM (32 bit imagelist) === imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W2K8SE (32 bit imagelist) === imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PRO (32 bit imagelist) === imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (32 bit imagelist) === imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 === W7PROX64 (64 bit imagelist) === imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 10, 7 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { 47, 31 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -9, -8 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000 imagelist.c:1438: Test failed: BeginDrag failed for { -7, 35 }, 0x00000000

Aug. 15, 2010

Re: avifil32: Fix EditStreamSetInfo wine checks

by testbot＠testbot.winehq.org

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=4442 Your paranoid android. === W98SE (32 bit api) === No test summary line found === WNT4WSSP6 (32 bit api) === No test summary line found === W2KPROSP4 (32 bit api) === No test summary line found === W2K3R2SESP2 (32 bit api) === No test summary line found === WVISTAADM (32 bit api) === No test summary line found === W2K8SE (32 bit api) === No test summary line found === W7PRO (32 bit api) === No test summary line found === W7PROX64 (32 bit api) === No test summary line found === W7PROX64 (64 bit api) === Timeout

Aug. 15, 2010

iPod synced with iTunes v7.6!

by Russ Mannex

Hello Maarten! I read your post on the WineHQ site. I was wondering if you know whether I am attempting something that simply will not work yet. I am running iTunes 7.7.1 on Wine 1.1.42. These are running on Ubuntu 10.04. iTunes is not showing my iPod. I have tried setting an autodetect drive E: to /media/IPOD, but iTunes seems to not see it there. Any help will be greatly appreciated, even if the answer is "will not work." Thanks. -- Russ Mannex Russ(a)Mannex.com

Aug. 15, 2010

Re: [2/2] ws2_32, WS2_sendto: Avoid error when sending zero byte buffer (try 2)

by Mike Kaplinskiy

Several things: - Don't set errno. For good practice it's more or less read-only. - All the tests have to pass after each patch, so if your tests fail (which they probably should) without your patch, add todo_wine and then remove them in the followup patch (or just send the tests second). - The tests you provided pass without this patch so I'm not convinced that your fix is necessary. errno 107 = ENOTCONN, so while 0 length sends work just fine, they only work when non-zero sends also work. i.e. invalid sends get turned to valid sends on windows when the length is 0. It might be better to test calling WSASendTo with 0 length on unconnected tcp (or udp if tcp doesn't work) sockets. Good luck, Mike. On Sat, Aug 14, 2010 at 5:45 AM, Wolfgang Schwotzer <wolfgang.schwotzer(a)gmx.net> wrote: > This solves #19397. > > > > >

Aug. 14, 2010

Re: kernel32/tests: GetVolumeInformationA X: succeeds iff drive's default dir is root. (try 2)

by Greg Geldorp

Hi Joerg, I temporarily attached a second disk to all TestBot VMs and ran the test, both from the C: drive and from the (new) E: drive. Full results attached. In short: everything passes. Ge.

Aug. 14, 2010

RE: Wine users with a CD-ROM drive, please test

by Greg Geldorp

Hi Joerg, > From: Joerg Hoehle > > I found out that some machines ignore > set c audio all off > which was in the testsuite, while others react to it and even > update the system preferences volume mixer control if > it happens to be open. > > I don't know whether that difference depends on the HW (CD-ROM > driver) or the OS. You can find it out by posting your results here. > > I'm now using > set c audio all on > (which should be the default) > such that all users running the testsuite get to hear something. > > https://testbot.winehq.org/JobDetails.pl?Key=4434 > mcicda.c:612: Test failed: STOP all returned MCIERR_HARDWARE > (I fixed that, but not yet on testbot). I ran mcicda_test from TestBot job 4436 on the TestBot VMs, with a data .iso connected as CD-ROM. Full results in attachment. In short: On NT4, Win2000: mcicda.c:318: Test failed: resume without play: 0=NOERROR On NT4, Win2000, XP, W2K3 mcicda.c:397: Test failed: STATUS position: MCIERR_HARDWARE Ge.

Aug. 14, 2010

Re: Wine users with a CD-ROM drive, please test

by Jeff Zaroyko

On Fri, Aug 13, 2010 at 11:03 PM, <Joerg-Cyril.Hoehle(a)t-systems.com> wrote: > I'm now using > set c audio all on > (which should be the default) > such that all users running the testsuite get to hear something. > > https://testbot.winehq.org/JobDetails.pl?Key=4434 > mcicda.c:612: Test failed: STOP all returned MCIERR_HARDWARE > (I fixed that, but not yet on testbot). I hear the playback, no more failures here with the same media as tested before, except for the one you mention 612 which only occurred with a blank cd. Nice work!

Aug. 13, 2010

Wine users with a CD-ROM drive, please test

by Joerg-Cyril.Hoehle＠t-systems.com

Hi, I found out that some machines ignore set c audio all off which was in the testsuite, while others react to it and even update the system preferences volume mixer control if it happens to be open. I don't know whether that difference depends on the HW (CD-ROM driver) or the OS. You can find it out by posting your results here. I'm now using set c audio all on (which should be the default) such that all users running the testsuite get to hear something. https://testbot.winehq.org/JobDetails.pl?Key=4434 mcicda.c:612: Test failed: STOP all returned MCIERR_HARDWARE (I fixed that, but not yet on testbot). Regards, Jörg Höhle

Aug. 13, 2010

Re: [(try 2) 02/11] d3d10: Implement D3D10CreateBlob().

by Henri Verbeet

On 12 August 2010 22:01, Rico Schüller <kgbricola(a)web.de> wrote: > The whole structure (d3d10_blob) could be put in d3d10_main.c. Or should I > use a separate file for the ID3D10Blob interface as it is done with the > ID3DXBuffer interface in d3dx9_36.dll? Then the location in the header would > be fine. > I think D3D10CreateBlob() should forward to d3dcompiler (D3DCreateBlob()).

Aug. 13, 2010

Re: Fwd: Should we expect Liberation fonts to be installed?

by Paul "TBBle" Hampson

2010/8/12 André Hentschel <nerv(a)dawncrow.de>: > Wow, can you please update http://wiki.winehq.org/FontLoadOrder with these great informations? I'm not sure that's the _best_ page for it (this isn't about font loading, but font substitution) but I'll see about writing it all up properly this weekend. (And if I'm feeling enthused, see if I can make fontconfig aliases work, although a brief glace at the API suggests there's nothing specifically for fetching the alias list) -- Paul "TBBle" Hampson, Paul.Hampson(a)Pobox.com

Aug. 12, 2010

Re: [(try 2) 02/11] d3d10: Implement D3D10CreateBlob().

by Rico Schüller

Am 11.08.2010 22:19, schrieb Stefan Dösinger: > Am 11.08.2010 um 21:51 schrieb Rico Schüller: > >> --- a/dlls/d3d10/d3d10_private.h >> +++ b/dlls/d3d10/d3d10_private.h >> @@ -212,6 +212,17 @@ struct d3d10_effect >> struct d3d10_effect_technique *techniques; >> }; >> >> >> +extern const struct ID3D10BlobVtbl d3d10_blob_vtbl DECLSPEC_HIDDEN; >> > Do you need the declaration of the vtable in the header? As far as I can see you're not using it anywhere outside d3d10_main.c. > > Yeah, I don't need it in the header. The whole structure (d3d10_blob) could be put in d3d10_main.c. Or should I use a separate file for the ID3D10Blob interface as it is done with the ID3DXBuffer interface in d3dx9_36.dll? Then the location in the header would be fine.

Aug. 12, 2010

Re: Windows Imaging Component

by Roderick Colenbrander

On Thu, Aug 12, 2010 at 8:42 AM, Roderick Colenbrander <thunderbird2k(a)gmail.com> wrote: > On Thu, Aug 12, 2010 at 4:54 AM, Georgij Kirichenko > <kirichenkoga(a)gmail.com> wrote: >> This patch add support for decoding Dds, Ppm(and pgm, pbm) and Tga files th >> Windows Imaging Component. > > Each format you are adding requires its own patch. > >> This patch use dynamic linked FreeImage library, but i'am can't static link >> this library. > > First of all, I'm not so sure we want to use FreeImage. The initial > thing about which I'm not sure is the license. You can use it under > either a commercial license or under the GPL. The last one at least is > usable for us as it would make all of Wine GPL when you link to it. > I'm not sure about the 'free image public license terms'. It is not > something like a BSD license, but more complicated. Someone would have > to look at it whether that would even be usable (commercial versions > like Crossover would have issues). > > From what I remember TGA, and the PPM family are at least easy (not > sure about DDS though, but I believe it is easy as well). If there are > good standalone libs like libjpeg, libpng and friends for such > libraries which are either BSD or LGPL licensed (or something similar > that would be fine). We might also want to do them ourselves if we > wanted (and they are relatively trivial). > > Lets wait for what others are saying. > > Roderick > I missed this bit from the website: When using FreeImage in your open source or commercial application, you are REQUIRED to : " distribute the license (GNU GPL or FIPL) you choosed with your application (i.e. the TXT file) provide a suitable acknowledgement, either in the program's "About" box or in the user's manual (or both), for example : This software uses the FreeImage open source image library. See http://freeimage.sourceforge.net for details. FreeImage is used under the (GNU GPL or FIPL), version (license version)." Apparently they want you to mention that you are using their library which is not something we do in Wine (as far as I know) for anything else. (If we were using the GPL version, I'm not sure if the GPL even requires to such an advertising clause which I believe it doesn't) Roderick

Aug. 12, 2010

Re: Windows Imaging Component

by Roderick Colenbrander

On Thu, Aug 12, 2010 at 4:54 AM, Georgij Kirichenko <kirichenkoga(a)gmail.com> wrote: > This patch add support for decoding Dds, Ppm(and pgm, pbm) and Tga files th > Windows Imaging Component. Each format you are adding requires its own patch. > This patch use dynamic linked FreeImage library, but i'am can't static link > this library. First of all, I'm not so sure we want to use FreeImage. The initial thing about which I'm not sure is the license. You can use it under either a commercial license or under the GPL. The last one at least is usable for us as it would make all of Wine GPL when you link to it. I'm not sure about the 'free image public license terms'. It is not something like a BSD license, but more complicated. Someone would have to look at it whether that would even be usable (commercial versions like Crossover would have issues). >From what I remember TGA, and the PPM family are at least easy (not sure about DDS though, but I believe it is easy as well). If there are good standalone libs like libjpeg, libpng and friends for such libraries which are either BSD or LGPL licensed (or something similar that would be fine). We might also want to do them ourselves if we wanted (and they are relatively trivial). Lets wait for what others are saying. Roderick

Aug. 12, 2010

Re: Windows Imaging Component

by Kirill K. Smirnov

Aug. 12, 2010