May 2024 - Wine-Devel - list.winehq.org

[PATCH v5 28/28] ntsync: No longer depend on BROKEN.

by Elizabeth Figura

f5b335dc025cfee90957efa90dc72fada0d5abb4 ("misc: ntsync: mark driver as "broken" to prevent from building") was committed to avoid the driver being used while only part of its functionality was released. Since the rest of the functionality has now been committed, revert this. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- drivers/misc/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index faf983680040..2907b5c23368 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -507,7 +507,6 @@ config OPEN_DICE config NTSYNC tristate "NT synchronization primitive emulation" - depends on BROKEN help This module provides kernel support for emulation of Windows NT synchronization primitives. It is not a hardware driver. -- 2.43.0

May 19, 2024

[PATCH v5 27/28] docs: ntsync: Add documentation for the ntsync uAPI.

by Elizabeth Figura

Add an overall explanation of the driver architecture, and complete and precise specification for its intended behaviour. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- Documentation/userspace-api/index.rst | 1 + Documentation/userspace-api/ntsync.rst | 398 +++++++++++++++++++++++++ 2 files changed, 399 insertions(+) create mode 100644 Documentation/userspace-api/ntsync.rst diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index afecfe3cc4a8..d5745a500fa7 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -62,6 +62,7 @@ Everything else vduse futex2 perf_ring_buffer + ntsync .. only:: subproject and html diff --git a/Documentation/userspace-api/ntsync.rst b/Documentation/userspace-api/ntsync.rst new file mode 100644 index 000000000000..767844637a7d --- /dev/null +++ b/Documentation/userspace-api/ntsync.rst @@ -0,0 +1,398 @@ +=================================== +NT synchronization primitive driver +=================================== + +This page documents the user-space API for the ntsync driver. + +ntsync is a support driver for emulation of NT synchronization +primitives by user-space NT emulators. It exists because implementation +in user-space, using existing tools, cannot match Windows performance +while offering accurate semantics. It is implemented entirely in +software, and does not drive any hardware device. + +This interface is meant as a compatibility tool only, and should not +be used for general synchronization. Instead use generic, versatile +interfaces such as futex(2) and poll(2). + +Synchronization primitives +========================== + +The ntsync driver exposes three types of synchronization primitives: +semaphores, mutexes, and events. + +A semaphore holds a single volatile 32-bit counter, and a static 32-bit +integer denoting the maximum value. It is considered signaled (that is, +can be acquired without contention, or will wake up a waiting thread) +when the counter is nonzero. The counter is decremented by one when a +wait is satisfied. Both the initial and maximum count are established +when the semaphore is created. + +A mutex holds a volatile 32-bit recursion count, and a volatile 32-bit +identifier denoting its owner. A mutex is considered signaled when its +owner is zero (indicating that it is not owned). The recursion count is +incremented when a wait is satisfied, and ownership is set to the given +identifier. + +A mutex also holds an internal flag denoting whether its previous owner +has died; such a mutex is said to be abandoned. Owner death is not +tracked automatically based on thread death, but rather must be +communicated using ``NTSYNC_IOC_MUTEX_KILL``. An abandoned mutex is +inherently considered unowned. + +Except for the "unowned" semantics of zero, the actual value of the +owner identifier is not interpreted by the ntsync driver at all. The +intended use is to store a thread identifier; however, the ntsync +driver does not actually validate that a calling thread provides +consistent or unique identifiers. + +An event is similar to a semaphore with a maximum count of one. It holds +a volatile boolean state denoting whether it is signaled or not. There +are two types of events, auto-reset and manual-reset. An auto-reset +event is designaled when a wait is satisfied; a manual-reset event is +not. The event type is specified when the event is created. + +Unless specified otherwise, all operations on an object are atomic and +totally ordered with respect to other operations on the same object. + +Objects are represented by files. When all file descriptors to an +object are closed, that object is deleted. + +Char device +=========== + +The ntsync driver creates a single char device /dev/ntsync. Each file +description opened on the device represents a unique instance intended +to back an individual NT virtual machine. Objects created by one ntsync +instance may only be used with other objects created by the same +instance. + +ioctl reference +=============== + +All operations on the device are done through ioctls. There are four +structures used in ioctl calls:: + + struct ntsync_sem_args { + __u32 sem; + __u32 count; + __u32 max; + }; + + struct ntsync_mutex_args { + __u32 mutex; + __u32 owner; + __u32 count; + }; + + struct ntsync_event_args { + __u32 event; + __u32 signaled; + __u32 manual; + }; + + struct ntsync_wait_args { + __u64 timeout; + __u64 objs; + __u32 count; + __u32 owner; + __u32 index; + __u32 alert; + __u32 flags; + __u32 pad; + }; + +Depending on the ioctl, members of the structure may be used as input, +output, or not at all. All ioctls return 0 on success. + +The ioctls on the device file are as follows: + +.. c:macro:: NTSYNC_IOC_CREATE_SEM + + Create a semaphore object. Takes a pointer to struct + :c:type:`ntsync_sem_args`, which is used as follows: + + .. list-table:: + + * - ``sem`` + - On output, contains a file descriptor to the created semaphore. + * - ``count`` + - Initial count of the semaphore. + * - ``max`` + - Maximum count of the semaphore. + + Fails with ``EINVAL`` if ``count`` is greater than ``max``. + +.. c:macro:: NTSYNC_IOC_CREATE_MUTEX + + Create a mutex object. Takes a pointer to struct + :c:type:`ntsync_mutex_args`, which is used as follows: + + .. list-table:: + + * - ``mutex`` + - On output, contains a file descriptor to the created mutex. + * - ``count`` + - Initial recursion count of the mutex. + * - ``owner`` + - Initial owner of the mutex. + + If ``owner`` is nonzero and ``count`` is zero, or if ``owner`` is + zero and ``count`` is nonzero, the function fails with ``EINVAL``. + +.. c:macro:: NTSYNC_IOC_CREATE_EVENT + + Create an event object. Takes a pointer to struct + :c:type:`ntsync_event_args`, which is used as follows: + + .. list-table:: + + * - ``event`` + - On output, contains a file descriptor to the created event. + * - ``signaled`` + - If nonzero, the event is initially signaled, otherwise + nonsignaled. + * - ``manual`` + - If nonzero, the event is a manual-reset event, otherwise + auto-reset. + +The ioctls on the individual objects are as follows: + +.. c:macro:: NTSYNC_IOC_SEM_POST + + Post to a semaphore object. Takes a pointer to a 32-bit integer, + which on input holds the count to be added to the semaphore, and on + output contains its previous count. + + If adding to the semaphore's current count would raise the latter + past the semaphore's maximum count, the ioctl fails with + ``EOVERFLOW`` and the semaphore is not affected. If raising the + semaphore's count causes it to become signaled, eligible threads + waiting on this semaphore will be woken and the semaphore's count + decremented appropriately. + +.. c:macro:: NTSYNC_IOC_MUTEX_UNLOCK + + Release a mutex object. Takes a pointer to struct + :c:type:`ntsync_mutex_args`, which is used as follows: + + .. list-table:: + + * - ``mutex`` + - Ignored. + * - ``owner`` + - Specifies the owner trying to release this mutex. + * - ``count`` + - On output, contains the previous recursion count. + + If ``owner`` is zero, the ioctl fails with ``EINVAL``. If ``owner`` + is not the current owner of the mutex, the ioctl fails with + ``EPERM``. + + The mutex's count will be decremented by one. If decrementing the + mutex's count causes it to become zero, the mutex is marked as + unowned and signaled, and eligible threads waiting on it will be + woken as appropriate. + +.. c:macro:: NTSYNC_IOC_SET_EVENT + + Signal an event object. Takes a pointer to a 32-bit integer, which on + output contains the previous state of the event. + + Eligible threads will be woken, and auto-reset events will be + designaled appropriately. + +.. c:macro:: NTSYNC_IOC_RESET_EVENT + + Designal an event object. Takes a pointer to a 32-bit integer, which + on output contains the previous state of the event. + +.. c:macro:: NTSYNC_IOC_PULSE_EVENT + + Wake threads waiting on an event object while leaving it in an + unsignaled state. Takes a pointer to a 32-bit integer, which on + output contains the previous state of the event. + + A pulse operation can be thought of as a set followed by a reset, + performed as a single atomic operation. If two threads are waiting on + an auto-reset event which is pulsed, only one will be woken. If two + threads are waiting a manual-reset event which is pulsed, both will + be woken. However, in both cases, the event will be unsignaled + afterwards, and a simultaneous read operation will always report the + event as unsignaled. + +.. c:macro:: NTSYNC_IOC_READ_SEM + + Read the current state of a semaphore object. Takes a pointer to + struct :c:type:`ntsync_sem_args`, which is used as follows: + + .. list-table:: + + * - ``sem`` + - Ignored. + * - ``count`` + - On output, contains the current count of the semaphore. + * - ``max`` + - On output, contains the maximum count of the semaphore. + +.. c:macro:: NTSYNC_IOC_READ_MUTEX + + Read the current state of a mutex object. Takes a pointer to struct + :c:type:`ntsync_mutex_args`, which is used as follows: + + .. list-table:: + + * - ``mutex`` + - Ignored. + * - ``owner`` + - On output, contains the current owner of the mutex, or zero + if the mutex is not currently owned. + * - ``count`` + - On output, contains the current recursion count of the mutex. + + If the mutex is marked as abandoned, the function fails with + ``EOWNERDEAD``. In this case, ``count`` and ``owner`` are set to + zero. + +.. c:macro:: NTSYNC_IOC_READ_EVENT + + Read the current state of an event object. Takes a pointer to struct + :c:type:`ntsync_event_args`, which is used as follows: + + .. list-table:: + + * - ``event`` + - Ignored. + * - ``signaled`` + - On output, contains the current state of the event. + * - ``manual`` + - On output, contains 1 if the event is a manual-reset event, + and 0 otherwise. + +.. c:macro:: NTSYNC_IOC_KILL_OWNER + + Mark a mutex as unowned and abandoned if it is owned by the given + owner. Takes an input-only pointer to a 32-bit integer denoting the + owner. If the owner is zero, the ioctl fails with ``EINVAL``. If the + owner does not own the mutex, the function fails with ``EPERM``. + + Eligible threads waiting on the mutex will be woken as appropriate + (and such waits will fail with ``EOWNERDEAD``, as described below). + +.. c:macro:: NTSYNC_IOC_WAIT_ANY + + Poll on any of a list of objects, atomically acquiring at most one. + Takes a pointer to struct :c:type:`ntsync_wait_args`, which is + used as follows: + + .. list-table:: + + * - ``timeout`` + - Absolute timeout in nanoseconds. If ``NTSYNC_WAIT_REALTIME`` + is set, the timeout is measured against the REALTIME clock; + otherwise it is measured against the MONOTONIC clock. If the + timeout is equal to or earlier than the current time, the + function returns immediately without sleeping. If ``timeout`` + is U64_MAX, the function will sleep until an object is + signaled, and will not fail with ``ETIMEDOUT``. + * - ``objs`` + - Pointer to an array of ``count`` file descriptors + (specified as an integer so that the structure has the same + size regardless of architecture). If any object is + invalid, the function fails with ``EINVAL``. + * - ``count`` + - Number of objects specified in the ``objs`` array. + If greater than ``NTSYNC_MAX_WAIT_COUNT``, the function fails + with ``EINVAL``. + * - ``owner`` + - Mutex owner identifier. If any object in ``objs`` is a mutex, + the ioctl will attempt to acquire that mutex on behalf of + ``owner``. If ``owner`` is zero, the ioctl fails with + ``EINVAL``. + * - ``index`` + - On success, contains the index (into ``objs``) of the object + which was signaled. If ``alert`` was signaled instead, + this contains ``count``. + * - ``alert`` + - Optional event object file descriptor. If nonzero, this + specifies an "alert" event object which, if signaled, will + terminate the wait. If nonzero, the identifier must point to a + valid event. + * - ``flags`` + - Zero or more flags. Currently the only flag is + ``NTSYNC_WAIT_REALTIME``, which causes the timeout to be + measured against the REALTIME clock instead of MONOTONIC. + * - ``pad`` + - Unused, must be set to zero. + + This function attempts to acquire one of the given objects. If unable + to do so, it sleeps until an object becomes signaled, subsequently + acquiring it, or the timeout expires. In the latter case the ioctl + fails with ``ETIMEDOUT``. The function only acquires one object, even + if multiple objects are signaled. + + A semaphore is considered to be signaled if its count is nonzero, and + is acquired by decrementing its count by one. A mutex is considered + to be signaled if it is unowned or if its owner matches the ``owner`` + argument, and is acquired by incrementing its recursion count by one + and setting its owner to the ``owner`` argument. An auto-reset event + is acquired by designaling it; a manual-reset event is not affected + by acquisition. + + Acquisition is atomic and totally ordered with respect to other + operations on the same object. If two wait operations (with different + ``owner`` identifiers) are queued on the same mutex, only one is + signaled. If two wait operations are queued on the same semaphore, + and a value of one is posted to it, only one is signaled. + + If an abandoned mutex is acquired, the ioctl fails with + ``EOWNERDEAD``. Although this is a failure return, the function may + otherwise be considered successful. The mutex is marked as owned by + the given owner (with a recursion count of 1) and as no longer + abandoned, and ``index`` is still set to the index of the mutex. + + The ``alert`` argument is an "extra" event which can terminate the + wait, independently of all other objects. + + It is valid to pass the same object more than once, including by + passing the same event in the ``objs`` array and in ``alert``. If a + wakeup occurs due to that object being signaled, ``index`` is set to + the lowest index corresponding to that object. + + The function may fail with ``EINTR`` if a signal is received. + +.. c:macro:: NTSYNC_IOC_WAIT_ALL + + Poll on a list of objects, atomically acquiring all of them. Takes a + pointer to struct :c:type:`ntsync_wait_args`, which is used + identically to ``NTSYNC_IOC_WAIT_ANY``, except that ``index`` is + always filled with zero on success if not woken via alert. + + This function attempts to simultaneously acquire all of the given + objects. If unable to do so, it sleeps until all objects become + simultaneously signaled, subsequently acquiring them, or the timeout + expires. In the latter case the ioctl fails with ``ETIMEDOUT`` and no + objects are modified. + + Objects may become signaled and subsequently designaled (through + acquisition by other threads) while this thread is sleeping. Only + once all objects are simultaneously signaled does the ioctl acquire + them and return. The entire acquisition is atomic and totally ordered + with respect to other operations on any of the given objects. + + If an abandoned mutex is acquired, the ioctl fails with + ``EOWNERDEAD``. Similarly to ``NTSYNC_IOC_WAIT_ANY``, all objects are + nevertheless marked as acquired. Note that if multiple mutex objects + are specified, there is no way to know which were marked as + abandoned. + + As with "any" waits, the ``alert`` argument is an "extra" event which + can terminate the wait. Critically, however, an "all" wait will + succeed if all members in ``objs`` are signaled, *or* if ``alert`` is + signaled. In the latter case ``index`` will be set to ``count``. As + with "any" waits, if both conditions are filled, the former takes + priority, and objects in ``objs`` will be acquired. + + Unlike ``NTSYNC_IOC_WAIT_ANY``, it is not valid to pass the same + object more than once, nor is it valid to pass the same object in + ``objs`` and in ``alert``. If this is attempted, the function fails + with ``EINVAL``. -- 2.43.0

May 19, 2024

[PATCH v5 26/28] maintainers: Add an entry for ntsync.

by Elizabeth Figura

Add myself as maintainer, supported by CodeWeavers. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c6dbde10bfc1..c9c9f1d98dd6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15748,6 +15748,15 @@ T: git https://github.com/Paragon-Software-Group/linux-ntfs3.git F: Documentation/filesystems/ntfs3.rst F: fs/ntfs3/ +NTSYNC SYNCHRONIZATION PRIMITIVE DRIVER +M: Elizabeth Figura <zfigura(a)codeweavers.com> +L: wine-devel(a)winehq.org +S: Supported +F: Documentation/userspace-api/ntsync.rst +F: drivers/misc/ntsync.c +F: include/uapi/linux/ntsync.h +F: tools/testing/selftests/drivers/ntsync/ + NUBUS SUBSYSTEM M: Finn Thain <fthain(a)linux-m68k.org> L: linux-m68k(a)lists.linux-m68k.org -- 2.43.0

May 19, 2024

[PATCH v5 25/28] selftests: ntsync: Add a stress test for contended waits.

by Elizabeth Figura

Test a more realistic usage pattern, and one with heavy contention, in order to actually exercise ntsync's internal synchronization. This test has several threads in a tight loop acquiring a mutex, modifying some shared data, and then releasing the mutex. At the end we check if the data is consistent. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index 968874d7e325..5fa2c9a0768c 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -1330,4 +1330,78 @@ TEST(alert_all) close(fd); } +#define STRESS_LOOPS 10000 +#define STRESS_THREADS 4 + +static unsigned int stress_counter; +static int stress_device, stress_start_event, stress_mutex; + +static void *stress_thread(void *arg) +{ + struct ntsync_wait_args wait_args = {0}; + __u32 index, count, i; + int ret; + + wait_args.timeout = UINT64_MAX; + wait_args.count = 1; + wait_args.objs = (uintptr_t)&stress_start_event; + wait_args.owner = gettid(); + wait_args.index = 0xdeadbeef; + + ioctl(stress_device, NTSYNC_IOC_WAIT_ANY, &wait_args); + + wait_args.objs = (uintptr_t)&stress_mutex; + + for (i = 0; i < STRESS_LOOPS; ++i) { + ioctl(stress_device, NTSYNC_IOC_WAIT_ANY, &wait_args); + + ++stress_counter; + + unlock_mutex(stress_mutex, wait_args.owner, &count); + } + + return NULL; +} + +TEST(stress_wait) +{ + struct ntsync_event_args event_args; + struct ntsync_mutex_args mutex_args; + pthread_t threads[STRESS_THREADS]; + __u32 signaled, i; + int ret; + + stress_device = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, stress_device); + + mutex_args.owner = 0; + mutex_args.count = 0; + ret = ioctl(stress_device, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_EQ(0, ret); + stress_mutex = mutex_args.mutex; + + event_args.manual = 1; + event_args.signaled = 0; + ret = ioctl(stress_device, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + stress_start_event = event_args.event; + + for (i = 0; i < STRESS_THREADS; ++i) + pthread_create(&threads[i], NULL, stress_thread, NULL); + + ret = ioctl(stress_start_event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + for (i = 0; i < STRESS_THREADS; ++i) { + ret = pthread_join(threads[i], NULL); + EXPECT_EQ(0, ret); + } + + EXPECT_EQ(STRESS_LOOPS * STRESS_THREADS, stress_counter); + + close(stress_start_event); + close(stress_mutex); + close(stress_device); +} + TEST_HARNESS_MAIN -- 2.43.0

May 19, 2024

[PATCH v5 24/28] selftests: ntsync: Add some tests for wakeup signaling via alerts.

by Elizabeth Figura

Expand the alert tests to cover alerting a thread mid-wait, to test that the relevant scheduling logic works correctly. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index 5465a16d38b3..968874d7e325 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -1113,9 +1113,12 @@ TEST(wake_all) TEST(alert_any) { struct ntsync_event_args event_args = {0}; + struct ntsync_wait_args wait_args = {0}; struct ntsync_sem_args sem_args = {0}; __u32 index, count, signaled; + struct wait_args thread_args; int objs[2], fd, ret; + pthread_t thread; fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); ASSERT_LE(0, fd); @@ -1163,6 +1166,34 @@ TEST(alert_any) EXPECT_EQ(0, ret); EXPECT_EQ(2, index); + /* test wakeup via alert */ + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 123; + wait_args.index = 0xdeadbeef; + wait_args.alert = event_args.event; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ANY; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(2, wait_args.index); + close(event_args.event); /* test with an auto-reset event */ @@ -1199,9 +1230,12 @@ TEST(alert_any) TEST(alert_all) { struct ntsync_event_args event_args = {0}; + struct ntsync_wait_args wait_args = {0}; struct ntsync_sem_args sem_args = {0}; + struct wait_args thread_args; __u32 index, count, signaled; int objs[2], fd, ret; + pthread_t thread; fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); ASSERT_LE(0, fd); @@ -1235,6 +1269,34 @@ TEST(alert_all) EXPECT_EQ(0, ret); EXPECT_EQ(2, index); + /* test wakeup via alert */ + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 123; + wait_args.index = 0xdeadbeef; + wait_args.alert = event_args.event; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ALL; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(2, wait_args.index); + close(event_args.event); /* test with an auto-reset event */ -- 2.43.0

May 19, 2024

[PATCH v5 23/28] selftests: ntsync: Add tests for alertable waits.

by Elizabeth Figura

Test the "alert" functionality of NTSYNC_IOC_WAIT_ALL and NTSYNC_IOC_WAIT_ANY, when a wait is woken with an alert and when it is woken by an object. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 179 +++++++++++++++++- 1 file changed, 176 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index 5d17eff6a370..5465a16d38b3 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -95,7 +95,7 @@ static int read_event_state(int event, __u32 *signaled, __u32 *manual) }) static int wait_objs(int fd, unsigned long request, __u32 count, - const int *objs, __u32 owner, __u32 *index) + const int *objs, __u32 owner, int alert, __u32 *index) { struct ntsync_wait_args args = {0}; struct timespec timeout; @@ -108,6 +108,7 @@ static int wait_objs(int fd, unsigned long request, __u32 count, args.objs = (uintptr_t)objs; args.owner = owner; args.index = 0xdeadbeef; + args.alert = alert; ret = ioctl(fd, request, &args); *index = args.index; return ret; @@ -115,12 +116,26 @@ static int wait_objs(int fd, unsigned long request, __u32 count, static int wait_any(int fd, __u32 count, const int *objs, __u32 owner, __u32 *index) { - return wait_objs(fd, NTSYNC_IOC_WAIT_ANY, count, objs, owner, index); + return wait_objs(fd, NTSYNC_IOC_WAIT_ANY, count, objs, owner, 0, index); } static int wait_all(int fd, __u32 count, const int *objs, __u32 owner, __u32 *index) { - return wait_objs(fd, NTSYNC_IOC_WAIT_ALL, count, objs, owner, index); + return wait_objs(fd, NTSYNC_IOC_WAIT_ALL, count, objs, owner, 0, index); +} + +static int wait_any_alert(int fd, __u32 count, const int *objs, + __u32 owner, int alert, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ANY, + count, objs, owner, alert, index); +} + +static int wait_all_alert(int fd, __u32 count, const int *objs, + __u32 owner, int alert, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ALL, + count, objs, owner, alert, index); } TEST(semaphore_state) @@ -1095,4 +1110,162 @@ TEST(wake_all) close(fd); } +TEST(alert_any) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_sem_args sem_args = {0}; + __u32 index, count, signaled; + int objs[2], fd, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 0; + sem_args.max = 2; + sem_args.sem = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, sem_args.sem); + objs[0] = sem_args.sem; + + sem_args.count = 1; + sem_args.max = 2; + sem_args.sem = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, sem_args.sem); + objs[1] = sem_args.sem; + + event_args.manual = true; + event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 0, NULL, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 0, NULL, 123, event_args.event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, index); + + ret = wait_any_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + close(event_args.event); + + /* test with an auto-reset event */ + + event_args.manual = false; + event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + count = 1; + ret = post_sem(objs[0], &count); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_any_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + ret = wait_any_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + close(event_args.event); + + close(objs[0]); + close(objs[1]); + + close(fd); +} + +TEST(alert_all) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_sem_args sem_args = {0}; + __u32 index, count, signaled; + int objs[2], fd, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 2; + sem_args.max = 2; + sem_args.sem = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, sem_args.sem); + objs[0] = sem_args.sem; + + sem_args.count = 1; + sem_args.max = 2; + sem_args.sem = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, sem_args.sem); + objs[1] = sem_args.sem; + + event_args.manual = true; + event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + ret = wait_all_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_all_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + close(event_args.event); + + /* test with an auto-reset event */ + + event_args.manual = false; + event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + count = 2; + ret = post_sem(objs[1], &count); + EXPECT_EQ(0, ret); + + ret = wait_all_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_all_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + ret = wait_all_alert(fd, 2, objs, 123, event_args.event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + close(event_args.event); + + close(objs[0]); + close(objs[1]); + + close(fd); +} + TEST_HARNESS_MAIN -- 2.43.0

May 19, 2024

[PATCH v5 22/28] selftests: ntsync: Add some tests for wakeup signaling with events.

by Elizabeth Figura

Expand the contended wait tests, which previously only covered events and semaphores, to cover events as well. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 151 +++++++++++++++++- 1 file changed, 147 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index 12ccb4ec28e4..5d17eff6a370 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -622,6 +622,7 @@ TEST(test_wait_any) TEST(test_wait_all) { + struct ntsync_event_args event_args = {0}; struct ntsync_mutex_args mutex_args = {0}; struct ntsync_sem_args sem_args = {0}; __u32 owner, index, count; @@ -644,6 +645,11 @@ TEST(test_wait_all) EXPECT_EQ(0, ret); EXPECT_NE(0xdeadbeef, mutex_args.mutex); + event_args.manual = true; + event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + objs[0] = sem_args.sem; objs[1] = mutex_args.mutex; @@ -692,6 +698,14 @@ TEST(test_wait_all) check_sem_state(sem_args.sem, 1, 3); check_mutex_state(mutex_args.mutex, 1, 123); + objs[0] = sem_args.sem; + objs[1] = event_args.event; + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(sem_args.sem, 0, 3); + check_event_state(event_args.event, 1, 1); + /* test waiting on the same object twice */ objs[0] = objs[1] = sem_args.sem; ret = wait_all(fd, 2, objs, 123, &index); @@ -700,6 +714,7 @@ TEST(test_wait_all) close(sem_args.sem); close(mutex_args.mutex); + close(event_args.event); close(fd); } @@ -746,12 +761,13 @@ static int wait_for_thread(pthread_t thread, unsigned int ms) TEST(wake_any) { + struct ntsync_event_args event_args = {0}; struct ntsync_mutex_args mutex_args = {0}; struct ntsync_wait_args wait_args = {0}; struct ntsync_sem_args sem_args = {0}; struct wait_args thread_args; + __u32 count, index, signaled; int objs[2], fd, ret; - __u32 count, index; pthread_t thread; fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); @@ -833,10 +849,101 @@ TEST(wake_any) EXPECT_EQ(0, thread_args.ret); EXPECT_EQ(1, wait_args.index); + /* test waking events */ + + event_args.manual = false; + event_args.signaled = false; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + objs[1] = event_args.event; + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event_args.event, 0, 0); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event_args.event, 0, 0); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + close(event_args.event); + + event_args.manual = true; + event_args.signaled = false; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + + objs[1] = event_args.event; + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event_args.event, 1, 1); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event_args.event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event_args.event, 0, 1); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + close(event_args.event); + /* delete an object while it's being waited on */ wait_args.timeout = get_abs_timeout(200); wait_args.owner = 123; + objs[1] = mutex_args.mutex; ret = pthread_create(&thread, NULL, wait_thread, &thread_args); EXPECT_EQ(0, ret); @@ -856,12 +963,14 @@ TEST(wake_any) TEST(wake_all) { + struct ntsync_event_args manual_event_args = {0}; + struct ntsync_event_args auto_event_args = {0}; struct ntsync_mutex_args mutex_args = {0}; struct ntsync_wait_args wait_args = {0}; struct ntsync_sem_args sem_args = {0}; struct wait_args thread_args; - int objs[2], fd, ret; - __u32 count, index; + __u32 count, index, signaled; + int objs[4], fd, ret; pthread_t thread; fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); @@ -881,12 +990,24 @@ TEST(wake_all) EXPECT_EQ(0, ret); EXPECT_NE(0xdeadbeef, mutex_args.mutex); + manual_event_args.manual = true; + manual_event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &manual_event_args); + EXPECT_EQ(0, ret); + + auto_event_args.manual = false; + auto_event_args.signaled = true; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &auto_event_args); + EXPECT_EQ(0, ret); + objs[0] = sem_args.sem; objs[1] = mutex_args.mutex; + objs[2] = manual_event_args.event; + objs[3] = auto_event_args.event; wait_args.timeout = get_abs_timeout(1000); wait_args.objs = (uintptr_t)objs; - wait_args.count = 2; + wait_args.count = 4; wait_args.owner = 456; thread_args.fd = fd; thread_args.args = &wait_args; @@ -920,12 +1041,32 @@ TEST(wake_all) check_mutex_state(mutex_args.mutex, 0, 0); + ret = ioctl(manual_event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + count = 2; ret = post_sem(sem_args.sem, &count); EXPECT_EQ(0, ret); EXPECT_EQ(0, count); + check_sem_state(sem_args.sem, 2, 3); + + ret = ioctl(auto_event_args.event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + + ret = ioctl(manual_event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(auto_event_args.event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_sem_state(sem_args.sem, 1, 3); check_mutex_state(mutex_args.mutex, 1, 456); + check_event_state(manual_event_args.event, 1, 1); + check_event_state(auto_event_args.event, 0, 0); ret = wait_for_thread(thread, 100); EXPECT_EQ(0, ret); @@ -943,6 +1084,8 @@ TEST(wake_all) close(sem_args.sem); close(mutex_args.mutex); + close(manual_event_args.event); + close(auto_event_args.event); ret = wait_for_thread(thread, 200); EXPECT_EQ(0, ret); -- 2.43.0

May 19, 2024

[PATCH v5 21/28] selftests: ntsync: Add some tests for auto-reset event state.

by Elizabeth Figura

Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET, NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for auto-reset events, and waiting on auto-reset events. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index b6481c2b85cc..12ccb4ec28e4 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -442,6 +442,65 @@ TEST(manual_event_state) close(fd); } +TEST(auto_event_state) +{ + struct ntsync_event_args event_args; + __u32 index, signaled; + int fd, event, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + event_args.manual = 0; + event_args.signaled = 1; + event_args.event = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, event_args.event); + event = event_args.event; + + check_event_state(event, 1, 0); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 1, 0); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_event_state(event, 0, 0); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 0); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 0); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 0); + + close(event); + + close(fd); +} + TEST(test_wait_any) { int objs[NTSYNC_MAX_WAIT_COUNT + 1], fd, ret; -- 2.43.0

May 19, 2024

[PATCH v5 20/28] selftests: ntsync: Add some tests for manual-reset event state.

by Elizabeth Figura

Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET, NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for manual-reset events, and waiting on manual-reset events. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index b77fb0b2c4b1..b6481c2b85cc 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -73,6 +73,27 @@ static int unlock_mutex(int mutex, __u32 owner, __u32 *count) return ret; } +static int read_event_state(int event, __u32 *signaled, __u32 *manual) +{ + struct ntsync_event_args args; + int ret; + + memset(&args, 0xcc, sizeof(args)); + ret = ioctl(event, NTSYNC_IOC_EVENT_READ, &args); + *signaled = args.signaled; + *manual = args.manual; + return ret; +} + +#define check_event_state(event, signaled, manual) \ + ({ \ + __u32 __signaled, __manual; \ + int ret = read_event_state((event), &__signaled, &__manual); \ + EXPECT_EQ(0, ret); \ + EXPECT_EQ((signaled), __signaled); \ + EXPECT_EQ((manual), __manual); \ + }) + static int wait_objs(int fd, unsigned long request, __u32 count, const int *objs, __u32 owner, __u32 *index) { @@ -353,6 +374,74 @@ TEST(mutex_state) close(fd); } +TEST(manual_event_state) +{ + struct ntsync_event_args event_args; + __u32 index, signaled; + int fd, event, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + event_args.manual = 1; + event_args.signaled = 0; + event_args.event = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, event_args.event); + event = event_args.event; + check_event_state(event, 0, 1); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 1, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 1, 1); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_event_state(event, 1, 1); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 1); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 1); + + close(event); + + close(fd); +} + TEST(test_wait_any) { int objs[NTSYNC_MAX_WAIT_COUNT + 1], fd, ret; -- 2.43.0

May 19, 2024

[PATCH v5 19/28] selftests: ntsync: Add some tests for wakeup signaling with WINESYNC_IOC_WAIT_ALL.

by Elizabeth Figura

Test contended "wait-for-all" waits, to make sure that scheduling and wakeup logic works correctly, and that the wait only exits once objects are all simultaneously signaled. Signed-off-by: Elizabeth Figura <zfigura(a)codeweavers.com> --- .../testing/selftests/drivers/ntsync/ntsync.c | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c index 993f5db23768..b77fb0b2c4b1 100644 --- a/tools/testing/selftests/drivers/ntsync/ntsync.c +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -706,4 +706,102 @@ TEST(wake_any) close(fd); } +TEST(wake_all) +{ + struct ntsync_mutex_args mutex_args = {0}; + struct ntsync_wait_args wait_args = {0}; + struct ntsync_sem_args sem_args = {0}; + struct wait_args thread_args; + int objs[2], fd, ret; + __u32 count, index; + pthread_t thread; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 0; + sem_args.max = 3; + sem_args.sem = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, sem_args.sem); + + mutex_args.owner = 123; + mutex_args.count = 1; + mutex_args.mutex = 0xdeadbeef; + ret = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_EQ(0, ret); + EXPECT_NE(0xdeadbeef, mutex_args.mutex); + + objs[0] = sem_args.sem; + objs[1] = mutex_args.mutex; + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 456; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ALL; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + count = 1; + ret = post_sem(sem_args.sem, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + + ret = pthread_tryjoin_np(thread, NULL); + EXPECT_EQ(EBUSY, ret); + + check_sem_state(sem_args.sem, 1, 3); + + ret = wait_any(fd, 1, &sem_args.sem, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = unlock_mutex(mutex_args.mutex, 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, count); + + ret = pthread_tryjoin_np(thread, NULL); + EXPECT_EQ(EBUSY, ret); + + check_mutex_state(mutex_args.mutex, 0, 0); + + count = 2; + ret = post_sem(sem_args.sem, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + check_sem_state(sem_args.sem, 1, 3); + check_mutex_state(mutex_args.mutex, 1, 456); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + + /* delete an object while it's being waited on */ + + wait_args.timeout = get_abs_timeout(200); + wait_args.owner = 123; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + close(sem_args.sem); + close(mutex_args.mutex); + + ret = wait_for_thread(thread, 200); + EXPECT_EQ(0, ret); + EXPECT_EQ(-1, thread_args.ret); + EXPECT_EQ(ETIMEDOUT, thread_args.err); + + close(fd); +} + TEST_HARNESS_MAIN -- 2.43.0

May 19, 2024